Wi-Fi Function Instruction Manual
Table Of Contents
- Cover
- Introduction
- Getting Started
- Connecting to a Bluetooth-compatible Smartphone via Wi-Fi
- Connecting to an NFC-compatible Smartphone via Wi-Fi
- Connecting to a Smartphone via Wi-Fi with the Wi-Fi Button
- Connecting to Another Camera via Wi-Fi
- Connecting to Connect Station via Wi-Fi
- Connecting to EOS Utility via Wi-Fi
- Connecting to a Printer via Wi-Fi
- Sending Images to a Web Service
- Advanced Wi-Fi Connection
- Reconnecting via Wi-Fi
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
114
This is a Wi-Fi connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an
8-digit identification number specified on the camera is set at the
access point to establish a Wi-Fi connection.
Even if there are multiple access points active in the surrounding
area, a relatively reliable Wi-Fi connection can be established using
this shared identification number.
It may take approx. one minute to establish a Wi-Fi connection.
1
Press the <k> button.
2
Select an item.
If the history (p.126) is displayed,
switch the screen with the <Y> <Z>
keys.
If the [Wireless communication
settings] screen is displayed, set the
Wi-Fi settings (p.12).
Press the <W> <X> or <Y> <Z>
keys to select an item, then press
<0>.
For [z] (Transfer imgs between
cameras), see “Connecting to
Another Camera via Wi-Fi” (p.61).
Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination
(p.123).
Establishing a Wi-Fi Connection with
WPS (PIN Mode)