Wi-Fi Function Instruction Manual
Table Of Contents
- Cover
- Introduction
- Getting Started
- Connecting to a Bluetooth-compatible Smartphone via Wi-Fi
- Connecting to an NFC-compatible Smartphone via Wi-Fi
- Connecting to a Smartphone via Wi-Fi with the Wi-Fi Button
- Connecting to Another Camera via Wi-Fi
- Connecting to Connect Station via Wi-Fi
- Connecting to EOS Utility via Wi-Fi
- Connecting to a Printer via Wi-Fi
- Sending Images to a Web Service
- Advanced Wi-Fi Connection
- Reconnecting via Wi-Fi
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
Sending Images to a Smartphone from the Camera
42
1
Press the <M> button.
If you send images by operating the
camera with a Wi-Fi connection
established, the previous screen will
reappear. The Wi-Fi connection will
not be terminated.
If you send images by operating the
camera with a Bluetooth connection
established, the screen on the left will
appear.
Select [OK], then press <0> to
terminate the Wi-Fi connection.
Ending Image Transfer
During the image transfer operation, a picture cannot be taken even if
the camera’s shutter button is pressed.
Even if MOV-format movies are displayed in the list, they cannot be
saved to a smartphone.
You can cancel the image transfer by selecting [Cancel] during the
transfer.
You can select up to 999 files at a time.
With a Wi-Fi connection established, disabling the smartphone’s power
saving function is recommended.
When you reduce the image size, all images to be sent at the same time
are resized. Note that movies and b size still photos are not reduced.
When you use a battery to power the camera, make sure it is fully
charged.
With a Wi-Fi connection established, the camera’s auto power off does
not function.