Wi-Fi Function Instruction Manual
Table Of Contents
- Cover
- Introduction
- Getting Started
- Connecting to a Bluetooth-compatible Smartphone via Wi-Fi
- Connecting to an NFC-compatible Smartphone via Wi-Fi
- Connecting to a Smartphone via Wi-Fi with the Wi-Fi Button
- Connecting to Another Camera via Wi-Fi
- Connecting to Connect Station via Wi-Fi
- Connecting to EOS Utility via Wi-Fi
- Connecting to a Printer via Wi-Fi
- Sending Images to a Web Service
- Advanced Wi-Fi Connection
- Reconnecting via Wi-Fi
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
78
To establish a Wi-Fi connection, operations on the computer are
required. For details, refer to the computer’s instruction manual.
The configuration procedure is as follows, using Windows 8.1 as an
example.
1
Press the <k> button.
2
Select [D] (Remote control (EOS
Utility)).
If the history (p.126) is displayed,
switch the screen with the <Y> <Z>
keys.
If the [Wireless communication
settings] screen is displayed, set the
Wi-Fi settings (p.12).
3
Select [Register a device for
connection].
4
Check the SSID and password.
Check the SSID (network name) and
password displayed on the camera’s
LCD monitor.
In [Wi-Fi settings], if you set
[Password] to [None], the password
will not be displayed or required. For
details, see page 159.
Establishing a Wi-Fi Connection
Operation on the Camera-1
Password
SSID (network name)
“_Canon0A” is displayed at the end of the SSID.