User manual

Table Of Contents
103
Manual Exposure
Exposure Compensation with ISO Auto
If the ISO speed is set to [AUTO] for manual exposure shooting, you can
set exposure compensation (
=
128) as follows:
Touch the exposure level indicator
[
z
: Expo.comp./AEB]
Quick Control screen
o
If ISO Auto is set, the ISO speed setting will change to obtain the standard
exposure with the set shutter speed and aperture. Therefore, you may
not obtain the desired exposure e󰀨ect. In this case, set the exposure
compensation.
o
With the camera set to the <
a
> mode + ISO Auto + <
q
> (Evaluative
metering) and [
8
C.Fn I-7: AE lock meter. mode after focus] set to the
default setting (
=
529), holding down the shutter button halfway will lock the
ISO speed after focus is achieved with One-Shot AF.
o
When ISO Auto is set, you can press the <
A
> button to lock the ISO speed.
o
To compare the current exposure to the exposure when you pressed the
<
A
> button initially with a manually set ISO speed, press the <
A
> button,
recompose the shot, and check the exposure level indicator.
o
With ISO Auto set and [
8
C.Fn I-1: Exposure level increments] set to [1/2-
stop], any 1/2-stop exposure compensation will be implemented with the ISO
speed (1/3 stop) and shutter speed. However, the shutter speed displayed will
not change.