User manual

Table Of Contents
224
Setting the Flash Function
Slow Synchro
You can set the ash-sync speed for ash
photography in <
f
> aperture-priority AE
mode or <
d
> Program AE mode.
z
[ ] 1/180-30sec. auto
The ash sync speed is set automatically within a range of 1/180 sec. to
30 sec. to suit the scene’s brightness. Slow-sync shooting is used under
some shooting conditions, in low-light locations, and shutter speed is
automatically lowered.
z
[ ] 1/180-1/60sec. auto
Prevents a slow shutter speed from being set automatically in low-light
conditions. It is e󰀨ective for preventing subject blur and camera shake.
However, while the subject will be properly exposed with the ash, the
background may come out dark.
z
[ ] 1/180 sec. (xed)
The ash sync speed is xed at 1/180 sec. This more e󰀨ectively
prevents subject blur and camera shake than with [1/180-1/60sec. auto].
However, in low light, the subject’s background will come out darker than
with [1/180-1/60sec. auto].
o
By default, it is set to [1/180-1/60sec. auto]. To use slow-sync shooting in
<
f
> or <
d
> mode, set to [1/180-30sec. auto].
o
High-speed sync is not available in <
f
> or <
d
> mode when set to [1/180
sec. (xed)].