User manual

Table Of Contents
273
Recording Time-lapse Movies
o
You can use Wireless Remote Control BR-E1 (sold separately) to start and
stop the time-lapse movie recording.
With Wireless Remote Control BR-E1
First pair the Wireless Remote Control BR-E1 with the camera (
=
399).
Set [
z
: Remote control] to [Enable].
Take test shots, then when the camera is ready to shoot (as in step 15 on
=
268), set the BR-E1’s release mode/movie shooting switch to <
o
>
(immediate release) or <2> (release after 2-sec. delay).
If the remote control’s switch has been set to <
k
>, the time-lapse movie
recording cannot start.
Camera status/remote
control setting
<
o
> Immediate
release
<2> 2-sec. delay
<
k
> Movie
recording
Test-shooting screen Test-shooting To shooting-ready
Shooting-ready Starts shooting
To test-shooting
screen
During time-lapse movie
recording
Ends recording Ends recording
Approx. Time Available for Recording Time-lapse Movies
For guidelines on how long you can record time-lapse movies (until the
battery runs out), see
=
587.