User manual

Table Of Contents
280
Setting Movie Servo AF
With this function enabled, the camera focuses on the subject continuously
during movie recording.
1
Select [z: Movie Servo AF].
2
Select [Enable].
z
When [Enable] is set:
The camera focuses on the subject continuously even when you are
not pressing the shutter button halfway.
To keep the focus at a specic position, or if you prefer not to record
mechanical sounds from the lens, you can temporarily stop Movie
Servo AF by touching [
Z
] in the lower left of the screen.
When Movie Servo AF is paused, if you return to movie recording after
operations such as pressing the <
M
> or <
x
> button or changing
the AF method, Movie Servo AF will resume.
z
When [Disable] is set:
Press the shutter button halfway or press the <
p
> button to focus.