User manual

Table Of Contents
564
Troubleshooting
[Does this battery/do these batteries display the Canon logo?] is
displayed.
z
Do not use any battery packs other than a genuine Canon Battery Pack
LP-E17.
z
Remove and install the battery again (
=
42).
z
If the electrical contacts are dirty, use a soft cloth to clean them.
The battery becomes exhausted quickly.
z
Use a fully charged battery (
=
40).
z
The battery performance may have degraded. See [
5
: Battery info.] to
check the battery’s recharge performance level (
=
381). If the battery
performance is poor, replace the battery with a new one.
z
The number of possible shots will decrease with any of the following
operations:
Pressing the shutter button halfway for a prolonged period.
Activating the AF frequently without taking a picture.
Using the lens’s Image Stabilizer.
Using the Wi-Fi/Bluetooth (wireless communication) function.
The camera turns o󰀨 by itself.
z
Auto power o󰀨 is in e󰀨ect. To deactivate auto power o󰀨, set [Auto power
o󰀨] under [
5
: Power saving] to [Disable] (
=
372).
z
Even if [Auto power o󰀨] is set to [Disable], the screen and viewnder
will still turn o󰀨 after the camera is left idle for the time set in [Display o󰀨]
and [Viewnder o󰀨], but the camera will remain on.
z
Set [
5
: Eco mode] to [O󰀨].