User manual

70
Fully Automatic Shooting (Scene Intelligent Auto)
Minimizing Blurred Photos
z
Use a sturdy tripod that can bear the weight of the shooting equipment.
Mount the camera securely on the tripod.
z
Using a remote switch (sold separately,
=
219) or a wireless remote
control (sold separately,
=
217) is recommended.
FAQ
z
Focusing is not possible (indicated by an orange AF point).
Aim the AF point over an area with good contrast, then press the shutter
button halfway (
=
54). If you are too close to the subject, move away
and shoot again.
z
Multiple AF points are displayed simultaneously.
If multiple AF points are displayed simultaneously, all of these positions
are in focus. As long as one AF point is displayed on the subject, you can
take the picture.
z
Pressing the shutter button halfway does not focus the
subject.
If the focus mode switch on the lens is set to <MF> (manual focus), set it
to <AF> (autofocus).
z
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred subject due
to camera shake. Using a tripod or a Canon EL/EX series Speedlite (sold
separately,
=
220) is recommended.
z
When the external ash was used, the bottom part of the
picture came out unnaturally dark.
If a hood is attached to the lens, it may obstruct the ash light. If the
subject is close, detach the hood before taking the picture with ash.