C Y P O E INSTRUCTION MANUAL
Introduction The EOS M is a high-performance, interchangeable-lens digital camera featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels, DIGIC 5, high-precision and high-speed 31-point AF, approx. 4.3 fps continuous shooting, and Full High-Definition (Full HD) movie shooting. The camera is highly responsive to any shooting situation, and provides many features for demanding shots.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack LP-E12 (with protective cover) Camera (with body cap) Neck Strap EM-100DB Y P O Interface Cable C EOS DIGITAL Solution Disk (Software) Battery Charger LC-E12/LC-E12E* Instruction Manual Software Instruction Manual Basic Instruction Manual * Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a power cord.
Conventions Used in this Manual Icons in this Manual <5> : Indicates the Main Dial to be turned. /// : Indicates the Main Dial buttons on the top, bottom, left, or right to be pressed. : Indicates the Main Dial to be pressed at the center. 0, 9, 7, 8 : Indicates that the corresponding function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button.
Chapters For first-time digital camera users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.
Contents at a Glance Shooting Shoot automatically Î p.65-87 (Basic Zone modes) Blur the background Î p.75 (C Creative Auto) Keep the background in sharp focus Shoot continuously Î p.133 (i Continuous shooting) Take a picture of yourself in a group Î p.136 (j Self-timer) Freeze the action Blur the action Î p.142 (s Shutter-priority AE) Y P O Create more background blur than with Creative Auto Î p.144 (f Aperture-priority AE) Shoot with image effects Î p.
Make a large-size print of the picture Î p.105 (73, 83, 1) Take many pictures Î p.105 (7a, 8a, b, c) Focusing Change the point of focus Î p.116 (AF point selection) Shoot a moving subject Î p.81, 131 (Servo AF) Playback Y P O View the images on the camera Î p.98 (x Playback) Search for pictures quickly Î p.231 (Index display) p.232 (I Image browsing) Rate images C Î p.234 (Ratings) Prevent important images from accidental deletion Î p.252 (K Image protect) Delete unnecessary images Î p.
Index to Features Power Image Quality Battery Image-recording quality Î p.105 • Charging • Installing/Removing • Battery check Î p.32 Î p.34 Î p.39 Picture Style Î p.114 White balance Î p.172 Color space Î p.176 Power outlet Î p.290 Image enhancement features Power saving Î p.
Index to Features Playback Metering mode Î p.151 Remote control Î p.291 Image review time Î p.205 Quick Control Î p.50 Single-image display Î p.98 Creative filters Î p.94 Shooting information display Î p.256 Index display Î p.231 Î p.232 Exposure Adjustment Exposure compensation Î p.153 AEB Î p.155 Image browsing (Jump display) AE lock Î p.157 Magnified view Î p.231 Image rotate Î p.233 Rating Î p.234 Movie playback Î p.239 Slide show Î p.243 Viewing images on TV Î p.
Contents Introduction 2 Item Check List................................................................................. 3 Conventions Used in this Manual ..................................................... 4 Chapters........................................................................................... 5 Contents at a Glance........................................................................ 6 Index to Features .............................................................................
Contents 2 Scene Intelligent Auto + Basic Zone Modes and Image Playback 65 A Fully Automatic Shooting (Scene Intelligent Auto) ................... 66 A Full Auto Techniques (Scene Intelligent Auto) ......................... 71 Select a Shooting Mode.................................................................. 74 C Creative Auto Shooting............................................................. 75 2 Shooting Portraits (Portrait) .......................................................
Contents f: Changing the Autofocus Operation ....................................... 130 i Continuous Shooting .............................................................. 133 j Using the Self-timer................................................................. 136 D Using a Flash............................................................................ 138 4 Advanced Shooting 141 s: Convey the Subject’s Movement .......................................... 142 f: Changing the Depth of Field ......
Contents Setting the Movie-recording Size .................................................. 187 Shooting Video Snapshots............................................................ 189 Movie Menu Function Settings...................................................... 197 6 Handy Features 203 Handy Features ............................................................................ 204 Disabling the Beeper .................................................................. 204 Card Reminder ...........
Contents k Enjoying Movies ..................................................................... 237 k Playing Movies ....................................................................... 239 X Editing a Movie’s First and Last Scenes ................................. 241 Slide Show (Auto Playback) ......................................................... 243 Viewing the Images on TV ........................................................... 247 K Protecting Images........................................
Contents 11 Reference 289 Using a Household Power Outlet.................................................. 290 Remote Control Shooting.............................................................. 291 External Speedlites ....................................................................... 292 Using Eye-Fi Cards....................................................................... 294 Function Availability Table According to Shooting Mode .............. 296 System Map ................................
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. Do not point the camera-attached lens toward the sun. The sun’s heat can damage the camera’s internal components. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry cloth.
Handling Precautions If the camera has not been used for an extended period, test all its functions before using it. If you have not used the camera for some time or if there is an important shoot coming up, have the camera checked by your Canon dealer or check the camera yourself and make sure it is working properly. When you detach the lens, the image sensor will be exposed. To prevent scratching the image sensor, do not touch the image sensor.
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there may be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period with the same screen displayed, screen burn-in may occur where you see remnants of what was displayed.
Handling Precautions Lens After detaching the lens from the camera, put down the lens with the rear end up and attach the lens caps to avoid scratching the lens surface and electrical contacts. Contacts Cautions regarding Prolonged Use If you use continuous shooting, Live View shooting, or movie shooting for a prolonged period, the camera may become hot. Although this is not a malfunction, holding the hot camera for a long period can cause slight skin burns.
Quick Start Guide 1 Insert the battery (p.34). 2 Insert a card (p.34). 3 Attach the lens (p.44). 4 Charging the battery: p.32 With the card’s label facing toward the front of the camera, insert it into the card slot. Y P O Align the lens’ index with the camera’s index. C Press the power button to turn on the camera, and set (Scene Intelligent Auto) (p.66). All the necessary camera settings will be set automatically.
Quick Start Guide 5 Focus the subject (p.49). 6 Take the picture (p.49). Aim the LCD monitor’s center over the subject. Press the shutter button halfway, and the camera will focus the subject. Press the shutter button completely to take the picture. Y P O Review the picture (p.205). 7 C The captured image will be displayed for approx. 2 sec. on the LCD monitor. To display the image again, press the button (p.98). To view the images captured so far, see “Image Playback” (p.98).
Nomenclature The names in bold indicate the parts mentioned up until the “Scene Intelligent Auto + Basic Zone Modes and Image Playback” section. Speaker (p.239) Focal plane mark (p.80) Power button (p.37) Flash-sync contacts Shutter button (p.49) Hot shoe (p.292) Microphone (p.178) Mode Dial (p.25) Self-timer lamp/ AF-assist beam (p.136/132) Strap mount (p.31) Grip C Y P O Remote control sensor (p.291) Terminal cover EF-M Lens mount index (p.44) Contacts (p.
Nomenclature LCD monitor/Touch screen (p.54, 59, 207/61, 230, 240) Power/Access lamp (p.36) Menu button (p.54) Movie Start/Stop button (p.178) Playback button (p.98) Quick Control/ Setting button (p.50, 88, 186, 236/54) C Y P O Info button (p.50, 59, 70, 98, 182) DC Coupler terminal cover (p.290) Tripod socket Card/Battery compartment cover (p.34) <5> Main Dial (p.64) Drive mode selection button (p.133, 136) Erase button (p.254) AE lock/FE lock button (p.
Nomenclature Screen Display (in Creative Zone modes, p.25) Number of possible shots Number of possible shots during WB bracketing Self-timer countdown Maximum burst Battery check (p.39) zxcn e High-speed sync (FP flash) d FE lock/FEB in-progress Eye-Fi transmission status* (p.294) Picture Style (p.114) Q Quick Control White balance (p.172) Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom Creative filters (p.94) Shooting mode AF method (p.
Nomenclature Mode Dial Switches to Scene Intelligent Auto, Still Photos, or Movies. Shoot still photos with or , or shoot movies with . Scene Intelligent Auto enables you to just press the shutter button to take a picture with the camera taking care of everything to suit the subject or scene. With Still photos, you can select Creative Zone modes or the Basic Zone modes. Y P O Creative Zone These modes give you more control for shooting various subjects.
Nomenclature Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene. C : Creative Auto (p.75) 2 : Portrait (p.78) 3 : Landscape (p.79) 4 : Close-up (p.80) 5 : Sports (p.81) 6 : Night Portrait (p.83) F : Handheld Night Scene (p.85) G : HDR Backlight Control (p.86) Y P O Movies With Movie, you can select Autoexposure or Manual exposure.
Nomenclature Lens EF-M Lens (Lens with no focus mode switch and no Image Stabilizer switch.) Focusing ring (p.117, 126) Zoom ring (p.45) Hood mount Zoom position index (p.45) Filter thread (front of lens) Y P O Lens mount index (p.44) C Contacts (p.
Nomenclature EF or EF-S Lens (Lens with focus mode switch and Image Stabilizer switch.) * To attach an EF or EF-S lens to the camera, Mount Adapter EF-EOS M is required. Hood mount Zoom position index (p.45) Distance scale Filter thread (front of lens) Zoom ring (p.45) Focusing ring (p.117, 126) Mount Adapter EF-EOS M EF Lens mount index C Y P O Contacts (p.19) Lens mount index (p.
Nomenclature Battery Charger LC-E12 Charger for Battery Pack LP-E12 (p.32). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. C Y P O Battery Charger LC-E12E Charger for Battery Pack LP-E12 (p.32).
C Y P O
This camera was designed so you can truly enjoy taking photos and capturing the feeling, the essence of a moment in your photos. Photographs are fun and wonderful! Getting Started Y P O This chapter explains preparatory steps before you start shooting and basic camera operations. C Attaching the Strap Fit the strap’s metallic ring over the camera’s strap mount. Use a coin or similar tool to turn the stopper clockwise until it stops (the index marks are aligned).
Charging the Battery 1 Remove the protective cover. the battery. 2 Attach Align the battery’s h mark with the battery charger’s g mark. To detach the battery, follow the above procedure in reverse. LC-E12 the battery. 3 Recharge For LC-E12 Y P O As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet. For LC-E12E LC-E12E C Connect the power cord to the charger and insert the plug into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E12 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC cards with UHS-I can also be used. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. Y P O the battery.
Installing and Removing the Battery and Card the cover. 4 Close Press the cover until it snaps shut. When you set the power to <1>, the number of possible shots (p.39) will be displayed on the LCD monitor. Possible shots Removing the Battery and Card 1 Set the power to <2>. the cover. 2 Open Make sure the LCD monitor and C3 Y P O Power/access lamp are off, then open the cover. If [Recording...] is displayed, close the cover. Remove the battery. 1.
Installing and Removing the Battery and Card the cover. 5 Close Press the cover until it snaps shut. Y P O After opening the card/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break. C When the Power/access lamp is blinking in orange, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the card/battery compartment cover during this time.
Turning on the Power If you set the power to <1> and the time zone/date/time setting screen appears, see page 40 to set the time zone and date/time. Pressing the power button toggles between <1> and <2>. With the power <2>, holding down the button for 2 sec. or longer will start the playback mode. When an EF-M lens is attached to the camera and the power is off, the aperture stops down to shut out the light and protect the inside of the camera.
Turning on the Power 3 Power-saving Features To save power, the LCD monitor turns off automatically if you do not operate the camera. If you continue to not operate the camera, the power will turn off automatically. While the LCD monitor is off, pressing any camera button or tapping the LCD monitor will turn it on again. If the power turned off, either press the power button or press the for at least approx. 2 sec. to turn on the power again.
Turning on the Power z Checking the Battery Level When the power is turned on, the battery level will be indicated in one of four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Battery Life Y P O [Approx.
3 Setting the Time Zone, Date and Time When you turn on the camera for the first time, the Time zone and Date/ Time setting screen will appear. First set the time zone, then set the date and time. Note that the shooting date/time appended to the captured images will be based on this date/time setting. Be sure to set the correct date/time. Set the Time Zone [London] is set by default. the menu screen. 1 Display Press the button. Under the [52] tab, select [Time 2 Zone].
3 Setting the Time Zone, Date and Time The menu setting procedure is explained on pages 54-56. The time displayed on the lower right is the time difference compared with Coordinated Universal Time (UTC). If you do not see your time zone, set the time zone while referring to the difference with UTC. After changing the time zone, check that the correct date/time has been set. You can also set the daylight saving time with [52: Time zone].
3 Setting the Time Zone, Date and Time saving time. 4 SetSettheit ifdaylight necessary. On the Main Dial, press the / button to select [Y]. Press so is displayed. On the Main Dial, press the / button to select [Z], then press . When the daylight saving time is set to [Z], the time set in step 3 will advance by 1 hour. If [Y] is set, the daylight saving time will be canceled and the time will go back by 1 hour. Y P O 5 ExitOnthethesetting.
3 Selecting the Interface Language 1 Display the menu screen. Press the button. Under the [52] tab, select 2 [LanguageK]. On the Main Dial, press the / button to select the [52] tab. On the Main Dial, press the / button to select [LanguageK] (the fifth from the top), then press . Y P 3O C Set the desired language. On the Main Dial, press the /// button to select the language, then press . X The interface language will change.
Attaching and Detaching a Lens The camera can use EF-M, EF, and EF-S lenses. To attach an EF or EF-S lens to the camera, Mount Adapter EF-EOS M is required. Attaching a Lens 1 Index Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’ index with the camera’s index. Turn the lens as shown by the arrow until it clicks in place. C Y P O 3 Remove the front lens cap.
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. C Y P O Do not look at the sun directly through any lens. Doing so may cause loss of vision.
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. * IS stands for Image Stabilizer. With an EF-M Lens (Operated with a Menu) Set it with the menu*. By default, it is set to [Enable]. 1 Display the menu screen. Press the button. Under the [A2] tab, select 2 [Image Stabilizer]. Y P O Press the / button to select the [A2] tab. Press the / button to select [Image Stabilizer], then press .
About the Lens Image Stabilizer With Lenses other than EF-M (Equipped with a Switch) Use the IS switch on the lens. Set the STABILIZER switch to <1>. Using the Image Stabilizer when Shooting the shutter button halfway. 1 Press X The Image Stabilizer will operate. the picture. 2 TakeWhen the picture looks steady on the C Y P O LCD monitor, press the shutter button completely to take the picture. The Image Stabilizer cannot correct “subject blur”, when the subject moves at the time of exposure.
Basic Operation Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Y P O Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3. Rest your hand’s right index finger lightly on the shutter button. 4. Press your arms and elbows lightly against the front of your body. 5. To maintain a stable stance, place one foot slightly ahead of the other.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway The camera will focus and adjust the exposure automatically (shutter speed and aperture set automatically). The exposure setting (shutter speed and aperture) is displayed (8). Pressing completely This releases the shutter and takes the picture.
Quick Control You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. There are two types of Quick Control screens: Q Quick Control and B Quick Control. 1 Q Quick Control Tap [Q] on the screen or press . B Quick Control Press and hold the button until the B Quick Control screen shown on the next page appears. X The Quick Control screen will appear. function. 2 SetTapthethedesired function to be set.
Quick Control Scene Intelligent Auto Q Quick Control B Quick Control B Basic Zone modes B Creative Zone modes B C Y P O the picture. 3 TakePress the shutter button completely to take the picture. Functions that can be set in the Scene Intelligent Auto and Basic Zone modes are on page 88. Functions that can be set in the Creative Zone modes, Movie mode, and playback mode are on pages 52, 186, and 236 respectively.
Quick Control Functions that can be set with Quick Control AF method (p.116) White balance (p.172) AF operation (p.130) Image-recording quality (p.105) Picture Style (p.114) Creative filters (p.260) Auto Lighting Optimizer (p.159) Metering mode (p.151) Shutter speed (p.142) Exposure compensation/AEB setting (p.153, 155) White balance correction (p.174) Highlight tone priority (p.285) C White balance (p.172) AF method (p.116) AF operation (p.130) White balance bracketing (p.175) Drive mode (p.
Quick Control Function Setting Screen Ð C Ð Y P O 53
3 Menu Operations You can set various settings with the menus such as the imagerecording quality, date/time, etc. Operate the menus with the button, Main Dial, and button. button LCD monitor Main Dial Menu Screen The menu applicable to the current shooting mode is provided.
3 Menu Operations Creative Zone modes 3 Playback 5 Set-up 9 My Menu A Shooting Tab Y P O Menu items Movie shooting C Menu settings 55
3 Menu Operations Menu Setting Procedure the menu screen. 1 Display Press the button. a tab. 2 Select Press the / button to select a tab. For example, the [A3] tab refers to the screen displayed when the A (Shooting) tab’s third icon [ ] from the left is selected. the desired item. 3 Select Press the / button Y P O to select the item, then press . the setting. 4 Select Press the / button C or / button to select the setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a computer, etc., before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press . the card.
3 Formatting the Card Execute [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card error is displayed (p.323). What is low-level formatting? Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Switching the LCD Monitor Display B Quick Control Each time you press the button, the LCD monitor switches between the Live View screen and B Quick Control (p.50). Menu Captured Image C Y P O Appears when you press the button. Press the button again to return to the Live View screen. Appears when you press the button. Press the button again to return to the Live View screen.
Feature Guide The Feature guide is a simple description of the respective shooting mode, function, or option. It is displayed when you change the shooting mode or use the Quick Control screen during still photo shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed. When you proceed with the operation, the Feature guide will disappear.
d Using the Touch Screen and Main Dial The LCD monitor is a touch-sensitive panel that you can operate with your fingers. Also, on the camera back, you can turn the Main Dial to make a selection and press the dial’s top, bottom, left, right, or center. You can operate this camera by touching the LCD monitor or using the Main Dial (turning it or pressing the top, bottom, left, or right) to select an item, then pressing the Main Dial’s center button to set it.
d Using the Touch Screen and Main Dial Drag Menu screen (Sample display) Slide your finger while touching the LCD monitor.
d Using the Touch Screen and Main Dial 3 Silencing the Beep during Touch Operations If [53: Beep] is set to [Touch to ] or [Disable], the beep will not sound during touch operations. 3 Set the Touch Control 1 Select [Touch control]. Under the [53] tab, select [Touch control], then press . Y P 2O C Set the Touch control. Normally, set this to [Standard]. Compared to [Standard], [Sensitive] provides better response to your touch operations. Try using both settings and select the one you prefer.
d Using the Touch Screen and Main Dial Main Dial To select a function, you can turn the dial or press the top, bottom, left, and right edges. By pressing at the center, you can set the selected function.
Through the lens of a camera, you may discover things you’ve never noticed before. Try wearing casual clothing so you can rest on one knee or crouch if necessary. Walk around with a camera in hand and observe your surroundings so you can discover new subjects you may find interesting. Scene Intelligent Auto + Basic Zone Modes and Image Playback Y P O This chapter explains how to shoot with the Scene Intelligent Auto and Basic Zone modes and how to play back images.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. With Scene Intelligent Auto, the camera always focuses automatically. You can select one of three AF methods with the menu or Quick Control screen. When you select [u (face)+Tracking], the person’s face will be detected and focused (p.118). [FlexiZone - Multi] makes it easier to focus a moving subject (p.120).
A Fully Automatic Shooting (Scene Intelligent Auto) the subject. 3 Focus Press the shutter button halfway to focus. X When focus is achieved, the AF point will turn green and the beeper will sound. the picture. 4 TakePress the shutter button completely. Y P O X The captured image will be displayed C for approx. 2 sec. on the LCD monitor. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) FAQ The AF point does not turn green and focus is not achieved. Try again, aiming the AF point at an area with a good bright/dark contrast, then press the shutter button halfway. Also, focus might not be achieved if you are too close to the subject. Move away from the subject and shoot. Multiple AF points appear in green. Focus has been achieved at all the green AF points. When the AF point covering the desired subject turns green, take the picture.
A Fully Automatic Shooting (Scene Intelligent Auto) With Speedlite 90EX Attached (p.138) (When you use flash, there is a slight time lag after you press the shutter button completely before the picture is taken.) The flash fired even though it was daylight. For a backlit subject, the flash may fire to help lighten the subject’s dark areas. If you do not want the flash to fire, switch the Speedlite’s power to <2>. The flash fired and the picture came out extremely bright.
A Fully Automatic Shooting (Scene Intelligent Auto) Display Screen During Shooting Each time you press the button, the information display will change.
A Full Auto Techniques (Scene Intelligent Auto) With a digital camera, you should use a card with ample capacity. If you cannot decide on the composition or which mode to use, you should shoot freely in various compositions and modes. Even if the picture is slightly blurred, it can still convey something. You can always erase failed or unwanted images, so be sure to try many different shots.
A Full Auto Techniques (Scene Intelligent Auto) Scene Icons When you shoot in the mode, an icon representing the scene detected by the camera will be displayed. Subject Portrait*1 Non-Portrait Background Nature and Color Movement Outdoor Movement Close*2 Scene Background Bright Gray Backlit Blue sky included Backlit Sunset *3 Spotlight Dark With tripod *4*5 C *3 Light blue Y P O *4*5 *3 Orange Dark blue *3 *1 : Displayed only when the AF method is set to [u+Tracking].
A Full Auto Techniques (Scene Intelligent Auto) *5 : Displayed with any of the lenses below: • EF24mm f/2.8 IS USM • EF28mm f/2.8 IS USM • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF500mm f/4L IS II USM • EF600mm f/4L IS II USM • EF-S18-55mm f/3.5-5.6 IS II • EF-S18-135mm f/3.5-5.6 IS STM • EF-S55-250mm f/4-5.6 IS II • IS lenses marketed in 2012 or later. * For certain scenes, the icon displayed may not match the actual scene.
Select a Shooting Mode 1 Tap the shooting mode icon on the screen’s upper left corner. The shooting mode selection screen will appear. the screen to select a 2 Tap shooting mode. You can also select the shooting mode on the B Quick Control screen. With z Y P O Tap the arrow on either side of the screen to go to another page. The shooting mode screen has three pages, the Creative Zone screen has one page, and the Basic Zone screen has two pages.
C Creative Auto Shooting In the mode, you can easily blur the background, change the drive mode or control the firing of an attached Speedlite flash. You can also choose the ambience you want to convey in your images. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Turn the Mode Dial to , then select on the screen. the Quick Control screen.
C Creative Auto Shooting (1) (4) (2) (1) (3) Battery check C Y P O (2) (4) Possible shots Image-recording quality (1) Ambience-based shots (Q Quick Control / B Quick Control) You can choose the ambience you want to convey in your images.
C Creative Auto Shooting (2) Blurring/Sharpening the background (Q Quick Control / B Quick Control) If you move the index mark toward the left, the background will look more blurred. If you move it toward the right, the background will look more in focus. If you want to blur the background, see “Shooting Portraits” on page 78. Depending on the lens and shooting conditions, the background may not look so blurred. If flash is used, this setting will not be applied.
2 Shooting Portraits (Portrait) This mode blurs the background to make the person stand out better. It also makes skin tones and the hair look softer. Shooting Tips C Y P O The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. Use a telephoto lens.
3 Shooting Landscapes (Landscape) Suited for wide scenes when you want everything to be in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips C Y P O With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes. Since the flash will be disabled, this mode <3> is also good for night scenes.
4 Shooting Close-ups (Close-up) For shooting flowers and small objects up close. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips C Y P O Use a simple background. When the background has no other flowers, leaves, etc., the closeup subject will stand out more. Move as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft>.
5 Shooting Moving Subjects (Sports) Use this mode to photograph a moving subject. Shooting Tips Y P O Shoot continuously. When you press the shutter button halfway, the camera will focus and the AF point will be fixed. While the camera focuses, the beeper will sound. If focus cannot be achieved, the AF point will turn orange. When the right moment comes, press the shutter button completely to take the picture.
5 Shooting Moving Subjects (Sports) Under low light, when camera shake is prone to occur, the LCD monitor’s shutter speed display on the bottom left will blink. Hold the camera steady and shoot.
6 Shooting Night Portraits (Night Portrait) (With a Tripod) Attach Speedlite 90EX and shoot portraits with a beautiful and bright night scene in the background. Shooting Tips C Y P O Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Take portraits without flash. When the Speedlite’s power is <1>, the Speedlite will fire a flash automatically under low-light conditions to obtain a nice portrait.
6 Shooting Night Portraits (Night Portrait) (With a Tripod) Tell the subject to keep still even after the flash fires. If you use a flash with the self-timer, the self-timer/AF-assist beam lamp will light up briefly after the picture is taken. When shooting night scenes or other scenes where multiple point-like light sources appear on the screen, the camera may not be able to focus automatically. In such cases, setting the [AF method] to [FlexiZone Single] is recommended.
F Shooting Night Scenes Handheld (Handheld Night Scene) For shooting night scenes while handholding the camera. When you take a picture, four shots are taken continuously to produce a single, bright photo that reduces camera shake. Shooting Tips C Y P O Hold the camera firmly. While shooting, hold the camera firmly and steadily. If the continuous shots are very misaligned due to camera shake, etc., they may not align properly in the final image.
G Shooting Backlit Scenes (HDR Backlight Control) When shooting a scene having both bright and dark areas. When you take a picture, three continuous shots will be taken at different exposures. The loss of detail in highlights and shadows will be reduced in the final image. Shooting Tips C Y P O Hold the camera firmly. While shooting, hold the camera firmly and steadily. If the continuous shots are very misaligned due to camera shake, etc., they may not align properly in the final image.
Cautions for When shooting night scenes and other scenes with multiple point-like light sources, the camera may not be able to focus automatically. In such cases, set the focus mode to [MF] and focus manually. When shooting flash photography, if the flash fires and the subject’s background is close enough to be illuminated by the flash or the night scene has only few lights, the shots may not align correctly. This can result in a blurry photo.
Q Quick Control for Basic Zone and Scene Intelligent Auto Example: Portrait mode Quick Control Functions Q: Q Quick Control B: B Quick Control o: Default setting Function u: Single shooting i: Continuous Drive shooting (p.133) mode Q Selftimer l (p.136) q a: Automatic firing Speedlite D: Flash on 90EX (Fires at all times) b: Flash off Ambience-based shots (p.89) Light/scene-based shots (p.92) Blurring/sharpening the background (p.
Shoot by Ambience Selection Except in the Basic Zone mode, you can select the ambience for shooting.
Shoot by Ambience Selection effect. 3 SetTapthetheambience item shown in the figure so that [Effect] appears on the bottom of the screen. Tap the effect’s level and setting. the picture. 4 TakePress the shutter button. If you change the shooting mode or set the power to <2>, the setting will revert back to [ Standard setting]. C Y P O The LCD monitor image shown with the ambience setting applied will not look exactly the same as the actual photo. Using flash may minimize the ambience effect.
Shoot by Ambience Selection Ambience Settings Standard setting Standard settings for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image settings. Vivid Makes the image more vivid and impressive than with [ Standard setting]. Soft Suited for portraits, pets, flowers, etc., when you want a soft look. Warm For portraits, pets, etc.
Shoot by Lighting or Scene Type In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [ Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye.
Shoot by Lighting or Scene Type When using a flash, the setting will switch to [ Default setting]. (However, the shooting information will display the lighting or scene type that was set.) If you want to set this together with [Ambience-based shots], set the [Light/scene-based shots] that best matches the ambience you have set. In the case of [Sunset] for example, warm colors will become prominent so the ambience you set may not work well.
k Using Creative Filters Except in the Scene Intelligent Auto, Handheld Night Scene, HDR Backlight Control, and Movie shooting modes, you can apply a Creative filter and check the effect and composition. When you take the picture, only the image applied with the Creative filter will be saved. If you want to also save the image not applied with the Creative filter, use the Creative filter during image playback (p.260). 1 Select a shooting mode other than , , , and Movie shooting.
k Using Creative Filters By tapping [ ], you can change the white frame’s horizontal or vertical orientation. the picture. 4 TakePress the shutter button. C Y P O When you use a Creative Filter and shoot, even if you set the drive mode to continuous shooting (i/q), single shooting will take effect. A Creative filter cannot be applied if the image-recording quality is 1+73 or 1.
k Using Creative Filters Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
k Using Creative Filters Toy camera effect Gives a color cast typical of toy cameras and darkens the image’s four corners. By adjusting the color tone, you can change the color cast. Miniature effect Creates a diorama effect. You can change where the image looks sharp. The camera will focus at the center of the white frame and the AF method will be fixed at [FlexiZone - Single]. C Y P O With [Grainy B/W], the grainy look of the image displayed on the screen may differ from that of the recorded image.
x Image Playback The easiest way to play back images is explained below. For more details on the playback procedure, see page 229. 1 Play back the image. Press the button. X The last captured image or last image viewed will appear. When the power is <2> and you hold down the button for 2 seconds or longer, the power will turn <1> and the playback screen will appear. an image. 2 Select When you press the button, Y P O the last image captured will be displayed first.
x Image Playback the image playback. 3 ExitPress the button to exit the image playback and return to the Live View screen.
C Y P O
Once you become more used to taking pictures, try shooting subjects from different angles, or slightly from above or below. Different facial expressions or unusual perspectives can create truly interesting photos. Trying different things before you shoot can also result in a great shot. Creative Shooting Y P O With Scene Intelligent Auto and Basic Zone modes, you can easily take pictures, but cannot change the function settings.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. 1 In the Creative Zone, select (p.74). the subject. 2 Focus Aim the AF point over the subject. Then press the shutter button halfway. X The AF point achieving focus will turn green (with One-Shot AF). X The shutter speed and aperture will be set automatically and displayed. C Y P O the display.
d: Program AE Shooting Tips Change the ISO speed. Use Speedlite 90EX. To match the subject and ambient lighting level, you can change the ISO speed (p.109) or use Speedlite 90EX (p.138). In the mode, the Speedlite 90EX does not fire automatically. In low-light conditions, turn the Speedlite 90EX and set [A1: External Speedlite control]’s [Flash firing] to [Enable]. The program can be shifted.
d: Program AE Quick Control In Creative Zone modes, you can set the AF method, AF operation, Drive mode, Image quality, White balance, Creative filters, Picture Style, Auto Lighting Optimizer, Metering mode, etc. C Y P O For details on metering modes, see page 151.
3 Setting the Image-Recording Quality You can select the pixel count and the image quality. Ten imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1+73, 1. 1 Pixels recorded (pixel count) Possible shots Select [Image quality]. Under the [A1] tab, select [Image quality], then press . the image-recording 2 Select quality. The respective quality’s pixel count and number of possible shots will be displayed to help you select the desired quality. Then press .
3 Setting the Image-Recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2 (59.4x42 cm/23.4x16.5 in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, 83 A3(42x29.7 cm/ 83, 1+73, or 1 is recommended. 16.5x11.7 in.) 1+73 1 b is suitable for playing the images on a 74 84 7a digital photo frame.
3 Setting the Image-Recording Quality About 1 1 is the raw image data before it is made into 73 or other images. Although 1 images require software such as Digital Photo Professional (provided, p.340) so that they can be displayed on the computer, they also offer flexibility for image adjustments possible only with 1. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. About 1+73 1+73 records both a 1 and 73 image with a single shot.
3 Setting the Image-Recording Quality Aspect ratio The image’s aspect ratio can be set to [3:2], [4:3], [16:9], or [1:1]. The area surrounding the image on the LCD monitor is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio. RAW images will always be saved with the [3:2] aspect ratio.
3 i: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.112). You can set the ISO speed with the following: 1. ISO display on the Live View screen, 2. button assigned with the menu’s Custom Function, 3. Menu screen, and 4. B Quick Control screen. Using the Live View screen’s ISO Display 1 Select the ISO speed. Tap the ISO display on the LCD monitor’s lower right.
3 i: Changing the ISO SpeedN Using the Menu Screen 1 Select [ISO speed]. Under the [A3] tab, select [ISO speed], then press . the ISO speed. 2 SetPress the / button to select the desired ISO speed, then press . With [AUTO] selected, the ISO speed will be set automatically (p.112). Y P O Using the B Quick Control Screen C 1 Select the ISO speed. On the B Quick Control screen, select the ISO display on the LCD monitor’s upper right. 2 SetTapthetheISOISOspeed.
3 i: Changing the ISO SpeedN ISO Speed Guide ISO Speed 100 - 400 400 - 1600 1600 - 12800, H Shooting Situation (No flash) Flash Range Sunny outdoors The higher the ISO speed, Overcast skies or evening time the farther the flash range will extend (p.139). Dark indoors or night * High ISO speeds will result in grainier images. Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to [1: On], “H” (equivalent to ISO 25600) can also be set (p.284).
3 i: Changing the ISO SpeedN ISO [AUTO] If the ISO speed is set to [AUTO] and you press the shutter button halfway, the current ISO speed will be displayed. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode A/C/2/3/4/5/6/G F d/s/f/a*1 With flash ISO Speed Setting Automatically set within ISO 100 - 6400 Automatically set within ISO 100 - 12800 Automatically set within ISO 100 - 6400*2 ISO 400*3*4*5 *1: Fixed at ISO 400 for bulb exposures.
3 i: Changing the ISO SpeedN 3 Setting the Maximum ISO Speed for [ISO Auto]N For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - 6400. Under the [A3] tab, select [ISO Auto], then press . Select the ISO speed, then press .
A Selecting the Best Picture Style for the SubjectN Six Picture Styles are provided to suit your photographic expression or subject. Each one can be fine-tuned. 1 Display the Quick Control screen. X With the Q Quick Control screen, you can check the effect while setting the Picture Style. 2 Tap [D]. Y P O Picture Style to select it. 3 TapToafine-tune the Picture Style, press the button. C Available Picture Styles D Auto The color tone will be adjusted automatically to suit the scene.
A Selecting the Best Picture Style for the SubjectN Q Portrait For nice skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone] (p.168), you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. S Neutral This Picture Style is for users who prefer to process images with their computer. Natural color tones and a subdued look.
Changing the Focusing Method Scene Intelligent Auto (AF only) Basic Zone modes, Creative Zone modes Focus mode* Menu AF method Menu, u+Tracking, FlexiZone - Multi, FlexiZone Quick Control Single Continuous AF Menu AF, MF, AF+MF Enable / Disable * “Focus mode” will be displayed when an EF-M lens has been attached. 1 Select the AF method. Under the [A2] tab, select [Focus mode], [AF method], or [Continuous AF]. Select the item to be set, then press .
Changing the Focusing Method With an EF-M lens (operated with a menu): the lens focus mode to [AF]. 2 SetUnder the [A2] tab, select [Focus mode]. Select [AF]. X For [Focus mode], if you select [AF+MF], you can hold the shutter button pressed halfway after the AF operation and focus manually (MF) with the focusing ring. With an EF or EF-S lens (operated with a switch): Set the lens focus mode switch to .
Changing the Focusing Method u(face)+Tracking: c Human faces are detected and focused. If a face moves, the AF point
also moves to track the face. 1 Check the AF point. 2 Focus the subject. When a face is detected, the
AF point will appear over the face to be focused. You can also tap the screen to select the face or subject. If the subject is not a face, < > will be displayed.
Changing the Focusing Method If the focus is far off, face detection will not be possible. If you set [Continuous AF] to [Enable], you can prevent the image from becoming greatly out of focus. An object other than a human face may be detected as a face. Face detection will not work if the face is very small or large in the picture, too bright or too dark, or partially hidden. The
may cover only part of the face. When you press the button, the < > AF point will appear at the center of the screen.
Changing the Focusing Method FlexiZone - Multi: o Up to 31 AF points (automatically selected) covering a wide area can be used to focus. This wide area can also be divided into 9 zones for focusing (zone selection). 1 Select the AF zone. N 2 Focus the subject. Pressing the button will toggle between automatic selection and zone selection. In Basic Zone modes, automatic selection will be set. To select a zone, tap it on the screen. To return to the center zone, press the button.
Changing the Focusing Method When the camera does not focus the desired target subject with automatic AF point selection, switch the AF method to zone selection or [FlexiZone - Single], and refocus. Depending on the aspect ratio setting, the number of AF points will differ. At [3:2], there will be 31 AF points. At [1:1] and [4:3], there will be 25 AF points. And at [16:9], 21 AF points. Also, at [16:9], there will be only three zones.
Changing the Focusing Method Notes About [u+Tracking], [FlexiZone - Multi], and [FlexiZone - Single] AF Operation Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. If the light source changes during autofocusing, the screen may flicker and focusing may be difficult. If this happens, autofocus under the light to be used for shooting.
Changing the Focusing Method Shooting conditions that make focusing difficult Low-contrast subjects such as the blue sky, solid-color flat surfaces or when highlights or shadow details are lost. Extremely bright or dark subjects. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Changing the Focusing Method Using Continuous AF The default setting is [Enable]. Since the focus is constantly close to the subject, when you press the shutter button, the camera quickly focuses the subject. If [Enable] is set, the lens will operate frequently and consume more battery power. This will reduce the number of possible shots (battery life). When an EF or EF-S lens is used, during Continuous AF, turn off the power before setting the lens’s focus mode switch to .
x Shooting with the Touch Shutter You can focus and take the picture automatically just by tapping the LCD monitor screen. This works in all shooting modes. 1 Enable the touch shutter. Tap [y] on the screen’s bottom left. Each time you tap the icon, it will toggle between [y] and [x]. When [x] is set, you can tap to focus and shoot. When [y] is set, you can tap to select the point to focus. Then, press the shutter button completely to shoot. to shoot. 2 TapTapthethescreen face or subject on the screen.
MF: Focus Manually You can magnify the image and focus precisely with manual focus. With an EF-M lens (operated with a menu): 1 Set the lens focus mode to [MF]. Under the [A2] tab, select [Focus mode]. Select [MF]. With an EF or EF-S lens (operated with a switch): Y P O Set the lens focus mode switch to . C the magnifying frame. 2 Display Tap the [ ] icon. X The magnifying frame will appear. Drag the magnifying frame over the screen to select the approximate area to magnify.
MF: Focus Manually the image. 4 Magnify Each time you tap on [ ] on the screen, the magnified area will change as follows: 1x a 5x a 10x a Magnification canceled manually. 5 Focus While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, tap [ ] on the screen to return to the normal view. AE lock Magnified area position Magnification the picture. 6 TakePress the shutter button completely Y P O (p.67).
When shooting, note the following: Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If you shoot continuously for a long period, the camera’s internal temperature may rise, and image quality may deteriorate. When you are not shooting, turn off the camera. If you shoot a long exposure while the camera’s internal temperature is high, image quality may deteriorate.
When shooting, note the following: Image on the LCD monitor Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. If the light source within the image changes, the screen may flicker. If this happens, stop shooting and resume shooting under the actual light source. If you point the camera in a different direction, the image brightness may change greatly momentarily. Wait until the brightness level stabilizes before shooting.
f: Changing the Autofocus OperationN In the , , , and shooting modes, you can select the AF (Autofocus) operation to suit the shooting condition or subject. In Basic Zone modes, the optimum AF operation is set for the respective shooting mode. the menu or focus mode 1 Use switch to set the focus to . the Quick Control screen, tap 2 On the AF operation button. Y P O 3 Tap the AF operation. C the subject. 4 Focus Aim the AF point over the subject and press the shutter button halfway.
f: Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. With evaluative metering (p.151), the exposure setting will be set at the same time focus is achieved. While you hold down the shutter button halfway, the focus will be locked. You can then recompose the shot if desired.
f: Changing the Autofocus OperationN Depending on the lens used, the distance to the subject and the subject’s speed, the camera may not be able to achieve correct focus. During continuous shooting, the image displayed on the LCD monitor may seem out of focus. If you operate the zoom during continuous shooting, the focus may be lost. Use continuous shooting after using the zoom to obtain the desired composition. With Servo AF, the beeper will not sound even when focus is achieved.
i Continuous Shooting You can shoot up to approx. 4.3 shots per second (p.134). This is effective for shooting a child walking toward you or capturing different facial expressions. 1 Press the button. You can also select the shooting mode on the B Quick Control screen. 2 TapBy[i]. tapping [2], you can return to the previous screen. 3 Take the picture. C Y P O The camera shoots continuously while you hold down the shutter button completely.
i Continuous Shooting Shooting Tips Also set the AF operation (p.130) matching the subject. • For a moving subject When an EF-M lens is being used and [Servo AF] and [AF method] are both set, focusing on a moving subject will be continuous during continuous shooting. • For still subjects When One-Shot AF is set, the camera will focus only once during continuous shooting. The continuous shooting speed (maximum number of frames per second) depends on the AF operation settings and the lens used.
i Continuous Shooting Flash can also be used (with Speedlite 90EX attached). Since the flash will require recycling time, the continuous shooting speed will be slower. When the battery level is low, the continuous shooting speed will become slightly slower. The continuous shooting speed may become slower depending on the lens type, shutter speed, aperture, subject conditions, brightness, flash use, etc.
j Using the Self-timer 1 Press the button. You can also select the shooting mode on the B Quick Control screen. self-timer. 2 TapBythetapping [2], you can return to the previous screen. Q: 10-sec. self-timer The remote controller can also be used (p.291). l: 2-sec. self-timer q: 10-sec. self-timer plus continuous shots Tap [W]/[X] to set the number of multiple shots (2 to 10) to be taken with the self-timer. C Y P O the picture. 3 TakeFocus the subject, then press the shutter button completely.
j Using the Self-timer With , the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the imagerecording quality or flash. When you use a Creative Filter and shoot, even if you set the drive mode to (Self-timer: Continuous), single shooting will take effect. After taking self-timer shots, playing back the image (p.98) to check focus and exposure is recommended. When using the self-timer to shoot only yourself, use focus lock (p.
D Using a Flash In indoors, low light, or backlit conditions in daylight, you can attach a flash unit and just press the shutter button to take nice pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to obtain correct exposure of the subject. In this section, the use of flash functions is explained using a Speedlite 90EX. For details about using other EOS-dedicated, EX-series Speedlite flashes, see page 292.
D Using a Flash 1 Attach a Speedlite and turn on the Speedlite. X The Speedlite’s power lamp will light and recharging will start. that the lamp lights. 2 Check When it lights, you can shoot. In Basic Zone modes (p.26), you will not be able to release the shutter until the lamp lights. the shutter button halfway. 3 Press On the bottom left of the LCD monitor, check that the icon is displayed. 4 Y P O Take the picture.
D Using a Flash Camera-Linked Flash Power Off Function When you turn the camera <2> after having shot with a Speedlite 90EX attached to the camera, the Speedlite’s power will also be turned <2>. However, depending on the operation, the Speedlite’s power off may not be correctly linked to the camera’s power off. Shooting Tips If the resulting picture is too dark. In Creative Zone modes: a, f, s or d, get closer to the subject or increase the ISO speed.
When you have an idea for an image, you can change the lens and set image effects to match what you want. This is the advantage of interchangeable-lens digital cameras. Having a mini tripod is also convenient for self-timer shots and to prevent camera shake. Advanced Shooting Y P O This chapter builds on Chapter 3 and introduces more ways to shoot creatively. The first half of this chapter explains how to use the , , and modes.
s: Convey the Subject’s Movement You can either freeze the action or create motion blur with the (Shutter-priority AE) mode. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen action (Fast shutter speed: 1/2000 sec.) Tap the shooting mode icon on the screen’s upper left corner. Y P O The shooting mode selection screen will appear. C 2 Tap [s] on the screen. the desired shutter speed. 3 SetSee “Shooting Tips” for advice on setting the shutter speed.
s: Convey the Subject’s Movement Shooting Tips To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec. to 1/30 sec. While following the moving subject, press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake. To blur a flowing river or fountain Use a slow shutter speed of 1/30 sec.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, use (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value, which is the size of the diaphragm hole inside the lens. Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Y P O Tap the shooting mode icon on the screen’s upper left corner.
f: Changing the Depth of Field Aperture Display The higher the f/number, the smaller the aperture opening will be. The apertures displayed will differ depending on the lens. If no lens is attached to the camera, “00” will be displayed for the aperture. Shooting Tips When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec.
f: Changing the Depth of Field If the picture will be too dark, the “30"” (30 sec.) shutter speed display will blink. If this happens, tap to display the setting screen and then tap [Y] (or turn the <5> dial to the left) to set a lower aperture f/number or increase the ISO speed. If the picture will be too bright, the “4000” (1/4000 sec.) shutter speed display will blink.
f: Changing the Depth of Field Depth of Field PreviewN The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene on the LCD monitor, the depth of field will look narrow. You can check the depth of field with the procedure below. 1 Enable depth-of-field preview. Under [54: Custom Function (C.Fn)], set [6: XL button function] to [1: Depth-of-field preview] (p.287).
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. Set the exposure while referring to the exposure level scale. This method is called manual exposure. * stands for Manual. 1 Tap the shooting mode icon on the screen’s upper left corner. The shooting mode selection screen will appear. <5> + <5> 2 Tap [a] on the screen. the shutter speed and 3 Set aperture.
a: Manual Exposure the exposure and take the 5 Set picture. Check the exposure level and set the desired shutter speed and aperture. If the exposure level exceeds ±3 stops, the will light up at <-3> or <+3> on the exposure level scale. C Y P O In [A3: Auto Lighting Optimizer], if the checkmark for [Disable during man expo] is removed, it can be set in the mode (p.159). When ISO Auto is set, you can press the button to lock the ISO speed.
a: Manual Exposure Using Speedlite 90EX To obtain a correct flash exposure for the main subject, the flash output will be set automatically to match the set aperture (autoflash exposure). You can set the shutter speed from 1/200 sec. to 30 sec. or bulb. BULB: Bulb Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to photograph fireworks and other subjects requiring long exposures.
3 q Changing the Metering ModeN Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. 1 Select [Metering mode]. Under the [A3] tab, select [Metering mode], then press . the metering mode. 2 SetSelect the metering mode, then press . Y P O q Evaluative metering C This is a general-purpose metering mode suited even for backlit subjects.
3 q Changing the Metering ModeN e Center-weighted average metering The brightness is metered at the image center and then averaged for the entire scene. This metering mode is for advanced users. C Y P O When One-Shot AF is set: With q, the exposure setting will be locked when you press the shutter button halfway and focus is achieved. With w, r, and e, the exposure setting is set at the moment of exposure. (The exposure setting is not locked when you press the shutter button halfway.
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±3 stops in 1/3-stop increments. You can set exposure compensation on the Live View screen or B Quick Control screen. On the Live View screen, you can adjust the exposure compensation while checking the effect on the screen.
Setting Exposure CompensationN y Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the exposure compensation up to ±2 stops in 1/3-stop increments. 1 Display the B Quick Control screen. [y]. 2 Select Press the // / button to select [y*]. X [Flash exposure comp.] will be Y P O displayed at the bottom. exposure compensation amount.
Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Display the B Quick Control screen. C2 Y P O Select exposure compensation. the AEB range.
Auto Exposure BracketingN the picture. 4 TakePress the shutter button completely. The three bracketed shots will be taken in this sequence: standard exposure, decreased exposure, and increased exposure. AEB can also be set with the [A3] tab’s [Expo.comp./AEB]. Canceling AEB Follow steps 1 to 3 to turn off the AEB level display. The AEB setting will also be canceled automatically if the power is set to <2>, flash recycling is completed, etc.
A Locking the Exposure (AE Lock)N You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button.
A Locking the Exposure (AE Lock)N AE Lock Effects Metering Mode (p.151) q* wre AF Point Selection Method (p.118-121) Automatic Selection Manual Selection AE lock is applied at the AF AE lock is applied at the point that achieved focus. selected AF point. AE lock is applied at the center AF point. * During manual focus, AE lock is applied at the center AF point.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.340). In Basic Zone modes, [Standard] is set. 1 Select [Auto Lighting Optimizer].
3 Noise Reduction SettingsN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the darker parts of the image (shadow areas) is further reduced. Change the setting to suit the noise level. 1 Select [High ISO speed NR]. Under the [A4] tab, select [High ISO speed NR], then press . Y P O the setting.
3 Noise Reduction SettingsN About [Multi Shot Noise Reduction] The following functions cannot be set: AEB, WB bracketing, [A4: Long exp. noise reduction], 1+73/1. If any of these has already been set, [Multi Shot Noise Reduction] cannot be set. Flash shooting is not possible. You cannot set [Multi Shot Noise Reduction] for bulb exposures. If you turn off the power or change the shooting mode to a Basic Zone mode, movie shooting, or bulb, the setting will change to [Standard].
3 Noise Reduction SettingsN the setting. 2 SetSelect the desired setting, then press . X The setting screen closes and the menu will reappear. [Auto] For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. [Enable] Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may be able to reduce noise that otherwise cannot be detected with the [Auto] setting.
3 Lens Peripheral Illumination / Chromatic Aberration Correction Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the lens characteristics. Color fringing along subject outlines is another chromatic aberration. Both lens aberrations can be corrected. RAW images can be corrected with Digital Photo Professional (provided software, p.340). Peripheral Illumination Correction 1 Select [Lens aberration correction].
3 Lens Peripheral Illumination / Chromatic Aberration Correction Chromatic Aberration Correction 1 Select the setting. Check that [Correction data available] is displayed for the attached lens. Select [Chromatic aberration], then press . Select [Enable], then press . If [Correction data not available] is displayed, see “About the Lens Correction Data” on the next page. picture. 2 TakeThetheimage will be recorded with the Y P O chromatic aberration corrected.
3 Lens Peripheral Illumination / Chromatic Aberration Correction About the Lens Correction Data The camera already contains lens peripheral illumination correction data and chromatic aberration correction data for approx. 25 lenses. If you select [Enable], the peripheral illumination correction and chromatic aberration correction will be applied automatically for any lens whose correction data is registered in the camera.
Q A Adjusting the Picture StyleN You can customize a Picture Style by adjusting individual parameters such as [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 169. 1 Display the Quick Control screen. 2 Tap [D]. a Picture Style to select it. 3 TapAfter selecting a Picture Style, press the button. X The Detail setting screen will appear. Y P O a parameter. 4 Select Tap the parameter to be set.
Q A Adjusting the Picture StyleN parameter. 5 SetTapthe[Y]/[Z] to set the parameter, then tap [2]. C Y P O By selecting [zDefault set.] in step 5, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 3 on page 114 to select the modified Picture Style and then shoot.
Q A Adjusting the Picture StyleN Parameter Settings and Effects Sharpness You can adjust the sharpness of the subject. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the image will look. Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end. The closer it is to G, the more muted the image will look.
Q A Adjusting the Picture StyleN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects Y P O N : None Normal black-and-white image with no filter effects. Ye: Yellow The blue sky will look more natural, and the white clouds will look crisper.
Q A Registering Customized Picture StylesN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create multiple Picture Styles whose parameter settings such as sharpness and contrast are different. You can also adjust the parameters of a Picture Style that has been registered to the camera with EOS Utility (provided software, p.340). 1 Display the Quick Control screen. 2 Tap [D].
Q A Registering Customized Picture StylesN a parameter. 5 Select Tap the parameter to be set. parameter. 6 SetTapthe[Y]/[Z] to set the parameter, then tap [2]. For details, see “Adjusting the Picture Style” on pages 166-169. Y P O X The base Picture Style will be indicated under [User Def.*]. C If a Picture Style has already been registered under [User Def.*], changing the base Picture Style in step 4 will nullify the parameter settings of the registered Picture Style.
Q B: Matching the Light SourceN The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with , you can select the white balance that matches the light source or set it manually by shooting a sheet of white paper, etc. 1 Display the Quick Control screen. 2 Tap a white balance to select it.
Q B: Matching the Light SourceN [Custom White Balance]. 2 Select Under the [A4] tab, select [Custom White Balance], then press . X The custom white balance selection screen will appear. the white balance data. 3 Import Select the image that was captured in step 1, then press . X On the dialog screen that appears, select [OK] and the data will be imported. When the menu reappears, press the button to exit the menu. Y P O . 4 Press X Display the Quick Control screen.
3 u Adjusting the Color Tone for the Light SourceN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB Shift/Bkt.].
3 u Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called the color space. With this camera, the color space for captured images can be set to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set. 1 Select [Color space]. Under the [A4] tab, select [Color space], then press . the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press . About Adobe RGB Y P O This is mainly for industrial use (printing machines, etc.
Movies shot with interchangeable-lens digital cameras have a unique look, different from video shot with camcorders. You can manipulate how light enters the camera, shoot wide angle, and enjoy many other video features. Shooting Movies Y P O Set the Mode Dial to to shoot movies. The movie recording format will be MOV. C Cards that can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher.
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot (p.247, 251). Autoexposure Shooting When you select the Movie shooting mode [k], autoexposure is set to adjust the brightness automatically. 1 Set the Mode Dial to . Select [k] (Movie auto 2 exposure) for the shooting mode. the subject. 3 Focus Before shooting a movie, focus with Y P O AF or manual focus (p.116-126). By default, [Movie Servo AF: Enable] (p.199) is set for continuous focusing.
k Shooting Movies While shooting a movie, be careful not to cover the microphone with your finger. With certain lenses, focus cannot be achieved with AF. Focus manually instead (p.126). If [Movie Servo AF: Disable] is set, you can focus by pressing the shutter button halfway. The ISO speed (100-6400), shutter speed, and aperture are set automatically. Press the button to lock the current exposure setting (AE lock) (p.157). To release the AE lock, press the button again.
k Shooting Movies Manual Exposure Shooting In the [M] shooting mode (Movie manual exposure), you can freely set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to . [M] (Movie manual 2 Select exposure) for the shooting mode. the shutter speed and aperture. 3 SetWhen you tap the shutter speed and <5> + <5> aperture, the setting screen will appear.
k Shooting Movies and shoot the movie. 5 Focus The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.178). ISO speed during manual-exposure shooting With [Auto], the ISO speed will be set automatically within ISO 100 - 6400. You can set the ISO speed manually within ISO 100 - 6400 in wholestop increments. Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to [1: On], the manual setting range will expand so you can also select “H” (equivalent to ISO 12800).
k Shooting Movies Movie Shooting Screen Each time you press the button, the information display will change.
k Shooting Movies During movie shooting, note the following: If is set and the ISO speed or aperture changes during movie shooting, the white balance may also change. If you shoot a movie under fluorescent or LED lighting, the movie may flicker. Zooming the lens during movie shooting is not recommended. Zooming the lens can cause changes in the exposure regardless of whether the lens’ maximum aperture changes or not. Exposure changes may be recorded as a result.
k Shooting Movies Final Image Simulation The final image simulation is a function that allows you to see the effects of the Picture Style, white balance, etc., on the image. During movie shooting, the image displayed will automatically reflect the effects of the settings listed below. Final image simulation for movie shooting Picture Style * All settings such as sharpness, contrast, color saturation, and color tone will be reflected.
k Shooting Movies The movie and still photo will be recorded as separate files on the card. Functions particular to still photo shooting are shown below. Other functions will be the same as for movie shooting. Function Settings ImageRecording Quality As set in [z1: Image quality]. When the movie recording size is [1920x1080] or [1280x720], the aspect ratio will be 16:9. When the size is [640x480], the aspect ratio will be 4:3.
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control The following can be set: AF method, image-recording quality (still photos), movie-recording size, video snapshots, white balance, Picture Style, and Auto Lighting Optimizer. The operation procedure is the same as with still photos (p.50).
3 Setting the Movie-recording Size The menu option [Z1: Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [52: Video system] setting. Image size A [1920x1080] : Full High-Definition (Full HD) recording quality. The aspect ratio will be 16:9. B [1280x720] : High-Definition (HD) recording quality. The aspect ratio will be 16:9. C [640x480] : Standard-definition recording quality.
3 Setting the Movie-recording Size Total Movie Recording Time and File Size Per Minute Movie-Recording Size Total Recording Time (approx.) 4 GB Card 8 GB Card 16 GB Card File Size (approx.) 11 min. 22 min. 44 min. 330 MB/min. 11 min. 22 min. 44 min. 330 MB/min. 46 min. 1 hr. 32 min. 3 hr. 4 min. 82.5 MB/min. 6 [1920x1080] 5 4 [1280x720] [640x480] 8 7 6 5 About Movie Files Exceeding 4 GB Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption.
3 Shooting Video Snapshots You can easily create a short movie with the video snapshot function. A video snapshot is a short movie clip lasting approx. 2 sec., 4 sec., or 8 sec. A collection of video snapshots is called a video snapshot album and can be saved to the card as a single movie file. By changing the scene or angle in each video snapshot, you can create dynamic short movies. A video snapshot album can also be played together with background music (p.194, 240).
3 Shooting Video Snapshots [Album settings]. 3 Select Select [Album settings], then press . If you want to continue shooting for an existing album, go to “Adding to Existing Album” (p.193). [Create a new album]. 4 Select Select [Create a new album], then press . the Snapshot length. 5 Select Press and use the / button to select the snapshot’s length, then press . C [OK]. 6 Select Select [OK], then press .
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 7 Shoot Press the (Movie start/stop) button to shoot a movie. X The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. X After the LCD monitor turns off and the Power/access lamp blinks, the confirmation screen will appear (p.192). as a video snapshot album.
3 Shooting Video Snapshots Options in Steps 8 and 9 Function Description The movie clip will be saved as the video J Save as album (Step 8) snapshot album’s first video snapshot. The video snapshot just recorded will be added J Add to album (Step 9) to the album recorded immediately before. A new video snapshot album is created and the movie clip is saved as the first video W Save as a new album (Step 9) snapshot. The new album will be a different file from the previously recorded album.
3 Shooting Video Snapshots Adding to Existing Album 1 Select [Add to existing album]. Follow step 4 on page 190 to select [Add to existing album], then press . an existing album. 2 Select Press the / button to C select an album, then press . Select [OK] on the dialog screen, then press . X Certain video snapshot settings will change to match the existing album’s settings. Press the button to exit the menu and return to the movie shooting screen. Y P O the video snapshot.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size] (p.187). • Changing the [Sound rec.] setting from [Auto/Manual] to [Disable] or from [Disable] to [Auto/Manual] (p.197). • Updating the firmware.
3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. 1 On the playback panel, select [X] (Edit). X The editing screen will be displayed. an editing operation. 2 Select Tap the icon of the editing operation or press the / button to select an editing operation, then press .
3 Shooting Video Snapshots the edited album. 3 Save Press the button to return to the Editing panel at the screen’s bottom. Tap the [W] (Save) icon or press the / button to select [W] (Save), then press . X The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press . C Y P O Background Music Music recorded on the memory card must be used only for private enjoyment.
3 Movie Menu Function Settings When you set the Mode Dial to , the [Z1] tab will show functions dedicated to movie shooting. The menu options are as follows. [Z1] menu Movie recording size You can set the image size and frame rate. For details, see pages 187-188. Sound recording C Level meter Y P O Normally, the built-in microphone will record stereo sound. If a commerciallyavailable microphone equipped with a mini plug (3.
3 Movie Menu Function Settings [Manual] : For advanced users. You can adjust the recording level manually. Select [Rec. level] and while looking at the level meter, press the / button to adjust. The loudest sound will be displayed for approx. 3 sec. Adjust so that the level meter on the right of “12” lights up occasionally. If the level meter lights up near “0”, the sound may be distorted. [Disable] : Sound is not recorded.
3 Movie Menu Function Settings Movie Servo AF The default setting is [Enable]. You can focus by pressing the shutter button halfway regardless of the setting. • When [Enable] is set: • You can shoot a movie while focusing a moving subject continuously. Note that the camera may record the lens operation noise. To reduce the recording of the lens operation noise, use a commercially-available external microphone. Using the EF-S18135mm f/3.5-5.6 IS STM or EF-M18-55mm f/3.5-5.
3 Movie Menu Function Settings AF with shutter button during k (movie recording) When you press the shutter button while shooting a movie, you can shoot a still photo. The default setting is [ONE SHOT]. • When [ONE SHOT] is set: • You can refocus and shoot a still photo by pressing the shutter button halfway while shooting a movie. • When shooting a static subject (not moving), you can take a picture with precise focus.
Movie Shooting Cautions Internal Temperature Warning (in white) or (in red) After prolonged shooting or when shooting under a high ambient temperature, the camera’s internal temperature will increase and the white icon or red icon will appear in white or red on the screen. The white icon indicates degraded still photo quality. It is recommended to temporarily stop shooting still photos until the camera’s internal temperature decreases.
Movie Shooting Cautions Still Photo Shooting During Movie Shooting Regarding the image quality of still photos, see “Image Quality” on page 128. If the shutter button is pressed halfway to focus while shooting movies, you may experience the following irregularities. • The image may go temporarily out of focus. • A sudden change of brightness may be recorded in the movie. • A momentary stop may be recorded in the movie. • The operation sound of the lens may be picked up and recorded.
When you get good at using the camera, you can get a feel for setting the shutter speed and aperture. Taking pictures will then become more fun. Even mundane, everyday scenes can become interesting snapshots. Feel free to experiment and use the camera to its fullest. Handy Features Y P O Disabling the Beeper (p.204) Card Reminder (p.204) Setting the Image Review Time (p.205) Displaying the Grid (p.205) Setting Power-saving Features (LCD auto off, Camera auto off) (p.
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer operation, and during touch screen operations. Under the [53] tab, select [Beep], then press . Select [Disable], then press . To silence the beeper only during touch screen operations, select [Touch to ]. 3 Card Reminder This setting prevents shooting if there is no card in the camera. Y P O Under the [A1] tab, select [Release shutter without card], then press .
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after capture. If [Off] is set, the image will not be displayed immediately after image capture. If [Hold] is set, the image review will be displayed up until the [LCD auto off] time. During image review, if you operate anything such as pressing the shutter button halfway, the image review will end. Under the [A1] tab, select [Image review], then press .
Handy Features 3 Setting Power-saving Features (LCD auto off, Camera auto off) If you do not operate the camera for a while, the LCD monitor will turn off automatically to save power. If you further leave the camera alone, the camera’s power will turn off automatically. You can set the time until when the LCD monitor turns off and when the camera’s power turns off automatically. If the LCD monitor has turned off to save power, pressing any camera button or tapping the LCD monitor will turn it on again.
Handy Features 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. You can either use the menu to set the brightness level or set the Custom Function to make it brighter temporarily. Adjusting the brightness with the menu Under the [52] tab, select [LCD brightness], then press . On the adjustment screen, tap [Y]/[Z] or press the / button to adjust the brightness. Then press .
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press . Y P O [Create folder]. 2 Select Select [Create folder], then press . C 3 Create a new folder. Select [OK], then press .
Handy Features Selecting a Folder With the folder selection screen displayed, select a folder and press . Subsequent captured images will be recorded into the selected folder. Lowest file number Number of images in folder Folder name Highest file number About Folders C Y P O As with “100CANON” for example, the folder name starts with three digits (folder number) followed by five alphanumeric characters. A folder can contain up to 9999 images (file number 0001 - 9999).
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. Under the [51] tab, select [File numbering], then press . The available settings are described below. Select one, then press .
Handy Features [Auto reset]: The file numbering restarts from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is convenient if you want to organize images by cards or folders.
Handy Features 3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [54] tab, select [Copyright information], then press . the option to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press . X The text entry screen will appear. Select [Display copyright info.] to check the copyright information currently set.
Handy Features Text Entry Procedure Changing the entry area: Press the button to toggle between the top and bottom entry areas. Moving the cursor: Either tap [ ]/[ ] or press the / button to move the cursor. Entering text: In the bottom area, type directly with the keyboard or turn the <5> dial to select a character, then press to enter it. Y P O Changing the entry mode: Tap [ ] at the bottom right of the bottom entry area.
Handy Features 3 Auto Rotation of Vertical Images When you shoot a vertical image and view it with the camera or personal computer, it will be rotated automatically to the vertical orientation. You can change this setting. Under the [51] tab, select [Auto rotate], then press . The available settings are described below. Select one, then press . [OnzD] : The vertical image is automatically rotated during playback on both the camera’s LCD monitor and on the computer.
Handy Features 3 Checking Camera Settings With the [54] tab’s [Displays camera settings], you can check the major camera settings. Settings display Card remaining capacity Color space (p.176) WB correction (p.174)/ WB bracketing (p.175) Touch control (p.63) Auto rotate display (p.214) Y P O Date/Time (p.40) Daylight saving time (p.42) Beeper (p.204) C Sensor cleaning (p.225) Camera auto off (p.206) LCD auto off (p.
Handy Features 3 Reverting the Camera to the Default SettingsN In movie shooting mode or in one of the Creative Zone still photo shooting modes, the camera’s shooting settings and menu settings can be reverted to their defaults. With this procedure, all settings in all shooting modes, including Scene Intelligent Auto, will revert to their default values. 1 Select [Clear settings]. Under the [54] tab, select [Clear settings], then press . [Clear all camera settings].
Handy Features Still Photo Shooting Settings Image-recording Settings C (Creative Auto) Image quality Picture Style 73 Auto AF operation One-Shot AF Auto Lighting Optimizer Standard Drive mode u (Single shooting) Metering mode q (Evaluative metering) Peripheral illumination correction Enable/ Correction data retained ISO speed ISO Auto AUTO (Auto) Maximum 6400 Exposure compensation Canceled Chromatic aberration correction Disable/ Correction data retained AEB Canceled Color space Whi
Handy Features Camera Settings Movie Shooting Settings Camera auto off Beep 1 min. Enable Shooting mode Movie auto exposure Release shutter without card Enable AF method FlexiZone Single Image review 2 sec. Movie Servo AF Enable Disable AF with shutter button during k Grid display Metering timer Movie recording Sound recording Video snapshot Off 16 sec.
Handy Features 3 Changing the Shooting Settings (B Quick Control) Screen Color You can change the background color of the shooting settings screen. Under the [53] tab, select [Screen color], then press . Select the desired color, then press .
3 Setting Speedlite FunctionsN You can set Speedlite functions with the menu. Applicable only to a compatible EX-series Speedlite when attached to the camera. The setting procedure is the same as that for setting a camera menu function. Select [External Speedlite control]. Under the [A1] tab, select [External Speedlite control], then press . X The external Speedlite control screen will appear. [Flash firing] Normally, set this to [Enable]. If [Disable] is set, the external Speedlite will not fire.
3 Setting Speedlite FunctionsN [Flash sync. speed in Av mode] You can set the flash-sync speed for flash photography in the aperture-priority AE (f) mode. : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible. : 1/200-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions. It is effective for preventing subject blur and camera shake.
3 Setting Speedlite FunctionsN [Flash function settings] You can set the functions in the table below. Note that the functions displayed will vary depending on the Speedlite model. Select [Flash function settings]. X The flash functions will be displayed.
3 Setting Speedlite FunctionsN Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will fire right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night.
3 Setting Speedlite FunctionsN Setting the Speedlite Custom Functions The Custom Functions displayed under [Flash C.Fn settings] will vary depending on the Speedlite model. 1 Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [Flash C.Fn settings], then press . the Custom Function. 2 SetEither tap [Y]/[Z] or press the / button to select the number and set the function. The procedure is the same as setting the camera’s Custom Functions (p.282).
f Automatic Sensor Cleaning When you switch the power to <1> or <2> (or Camera auto off), the Self Cleaning Sensor Unit will operate automatically to remove dust on the image sensor. Normally, you need not pay attention to this operation. You can also activate or stop the Self Cleaning Sensor Unit when necessary. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [53] tab, select [Sensor cleaning], then press . Y P O [Clean nowf]. 2 Select Select [Clean nowf], then press C .
f Automatic Sensor Cleaning Disabling Automatic Sensor Cleaning In step 2, select [Auto cleaningf] and set it to [Disable]. Manual Sensor Cleaning Dust that could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. Before cleaning the sensor, detach the lens from the camera. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Set the power to <2>.
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (provided software, p.340) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the LCD monitor with a patternless, solid-white object and take a picture. X The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start collecting the Dust Delete Data.
Viewing images on a large TV screen is a very different experience from seeing them on a computer screen. Seeing photos on a large screen is another way to enjoy them. Image Playback Y P O This chapter explains functions related to viewing photos and movies, in more detail than in Chapter 2 “Scene Intelligent Auto + Basic Zone Modes and Image Playback”. Here you will find explanations of how to play back and erase photos and movies with the camera and view them on a TV set.
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for playback operations. Press the button to play back images. (The last shot will appear first.) If the power is off, you can hold down the button for 2 sec. or longer to turn on the camera and display the playback screen. Browse Images Swipe with one finger. With the single-image display, use one finger to swipe the image to the left or right to see another image.
d Playing Back with the Touch Screen Reduce Images (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the screen changes from a single-image display to a 4-image index display and 9-image index display. The selected image on the index display is indicated in an orange frame. Movie images on the index display will have a vertical perforation. Magnify Images C Y P O Spread two fingers apart.
I Jumping through Images (Jump Display) With the single-image display, you can turn the <5> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump with 5]. Under the [x2] tab, select [Image jump with 5], then press . the jump method. 2 Select Press the // / button to select the desired jump method, then press .
b Rotating the Image You can rotate the image for viewing. 1 Select [Rotate image]. Under the [x1] tab, select [Rotate image], then press . an image. 2 Select Press the / button to select the image to be rotated. You can also select an image on the index display (p.231). Y P O the image. 3 Rotate Each time you press , the C image will rotate clockwise as follows: 90° a 270° a 0°. To rotate another image, repeat steps 2 and 3. To exit and return to the menu, press the button.
3 Setting Ratings You can rate images and movies with one of five rating marks: l/m/ n/o/p. This function is called rating. 1 Select [Rating]. Under the [x2] tab, select [Rating], then press . an image. 2 Select Press the / button to select an image or movie to be rated. By touching the LCD monitor with two fingers spread apart and then pinching the fingers, a three-image display will appear. You can then select images.
3 Setting Ratings The total number of images with a given rating that can be displayed is 999. If there are more than 999 images with a given rating, [###] will be displayed for that rating. Taking Advantage of Ratings With [x2: Image jump with 5], you can display only images and movies with a specific rating. With [x2: Slide show], you can play back only images and movies with a specific rating. With Digital Photo Professional (provided software, p.
Q Quick Control During Playback During playback, you can press to set any of the following: [ : Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], and [e: Image jump with 5]. For movies, only the functions in bold above can be set. During playback, the Quick Control screen can be displayed only with Q Quick Control, and not with the B button. The procedure is the same as that for using the Quick Control screen in shooting mode.
k Enjoying Movies Playback on a TV set (p.247, 251) Use the AV cable AVC-DC400ST or HDMI cable HTC-100 (both sold separately) to connect the camera to a TV set. Then you can play captured movies and still photos on the TV. If you have a High-Definition TV set and connect your camera with an HDMI cable, you can watch Full High-Definition (Full HD: 1920x1080) and HighDefinition (HD: 1280x720) movies with higher image quality.
k Enjoying Movies Playback and Editing with a Personal Computer (p.340) The movie files recorded on the card can be transferred to a personal computer and played or edited with ImageBrowser EX (provided software). To have the movie play back smoothly on a personal computer, use a high-performance personal computer. Regarding the computer hardware requirements for ImageBrowser EX, refer to the PDF file ImageBrowser EX User Guide.
k Playing Movies the image. 1 PlayPressback the button to display images. a movie. 2 Select Press the / button to C3 select a movie. On the single-image display, the < 1> icon displayed on the upper left indicates a movie. If the movie is a video snapshot, < > will be displayed. You can press the button to switch to the shooting information display (p.257). In the index display, perforations at the left edge of a thumbnail indicate a movie.
k Playing Movies Movie Playback Panel Operation Playback Description 7 Play Pressing toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the / button. The slow-motion speed is indicated at the upper right of the screen. 5 First frame 3 Previous frame Displays the movie’s first frame. Each time you press , the previous frame is displayed. If you hold down , it will rewind the movie.
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments (except for video snapshots). 1 On the movie playback screen, select [X]. X The editing screen will be displayed. the part to be edited out. 2 Specify Select either [U] (Cut beginning) or C [V] (Cut end), then press . Tap [3]/[6] to see the previous or next frame. Tap and hold down [3]/ [6] to fast forward the frames. After deciding which part to edit out, press .
X Editing a Movie’s First and Last Scenes the edited movie. 4 Save Select [W], then press . X The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press . On the confirmation dialog, select [OK], then press to save the edited movie and return to the movie playback screen. C Y P O When the battery level is low, editing the movie is not possible. Use a fully-charged battery.
3 Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. 1 Number of images to be played Select [Slide show]. Under the [x2] tab, select [Slide show], then press . the images to be played 2 Select from one of the following: [iAll images], [kMovies], [zStills], [iDate], [nFolder], or [9Rating]. Set the option that appears as [All images] and is circled in the illustration. There are two ways to do so.
3 Slide Show (Auto Playback) [iDate], [nFolder], or [9Rating] Select the date, folder, or rating of the images to be played. When is highlighted, press the button. Select the desired option, then press . [Date] Item [Folder] [Rating] Y P O Playback Description jAll images All the still photos and movies on the card will be played back. C iDate Still photos and movies taken on the selected shooting date will be played back.
3 Slide Show (Auto Playback) [Display time] [Repeat] [Transition effect] [Background music] Y P O the slide show. 4 StartSelect [Start], then press . C5 X After [Loading image...] is displayed, the slide show will start. Quit the slide show. To quit the slide show and return to the setting screen, press the button. To pause the slide show, press . During pause, [G] will be displayed on the upper left of the image. Press again to resume the slide show.
3 Slide Show (Auto Playback) Selecting the Background Music 1 Select [Background music]. Set [Background music] to [On], then press . the background music. 2 Select Press the / button to select the background music, then press . You can also select multiple background music tracks. Y P O background music. 3 PlayTo the listen to a sample of the background music, press the button. Press the / button to play another background music track.
Viewing the Images on TV You can view the still photos and movies on a TV set. Adjust the movie’s sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and TV set. Depending on the TV set, part of the image displayed may be cut off. Connecting an HDMI Cable and Viewing on a TV HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera.
Viewing the Images on TV the button. 5 Press X The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.) The images will automatically be displayed at the TV’s optimum resolution. By pressing the button, you can change the display format. To play back movies, see page 239. The images cannot be output at the same time from both the and terminals. Y P O Do not connect any other device’s output to the camera’s terminal.
Viewing the Images on TV Using HDMI CEC TV Sets If the TV set connected to the camera with an HDMI cable is compatible with HDMI CEC*, you can use the TV set’s remote control for playback operations. * An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit. 1 Set [Ctrl over HDMI] to [Enable]. Under the [x2] tab, select [Ctrl over HDMI], then press . Select [Enable], then press . Y P O the camera to a TV set.
Viewing the Images on TV Still photo playback menu Movie playback menu : Return : 9-image index : Play movie : Slide show : Disp. shooting info : Rotate the remote control’s Enter 5 Press button. X The menu appears and you can perform the playback operations shown on the left. Press the / button to select the desired option, then press the Enter button. For a slide show, press the remote control’s / button to select an option, then press the Enter button.
Viewing the Images on TV Connecting an AV Cable and Viewing on a TV If you use an AV cable to connect the camera to a TV, the playback will be in standard definition. 1 Connect the AV cable AVCDC400ST (sold separately) to the camera. With the plug’s logo facing the back of the camera, insert it into the terminal. the AV cable to the TV 2 Connect set. (Red) (White) AUDIO Connect the AV cable to the TV’s video IN terminal and audio IN terminal.
K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image 1 Select [Protect images]. Under the [x1] tab, select [Protect images], then press . [Select images]. 2 Select Select [Select images], then press . Image protect icon Y P O the image. 3 Protect Use the / button to C select an image to be protected, then press . X When an image is protected, the icon will appear on the top of the screen.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at one time. When you select [All images in folder] or [All images on card] in [x1: Protect images], all the images in the folder or on the card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. C Y P O If you format the card (p.57), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.252) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press . X The images will be displayed. By touching the LCD monitor with two fingers spread apart and then pinching the fingers, a three-image display will appear. You can then select images. To return to the single screen, touch the LCD monitor with two pinched fingers, then spread the fingers. the images to be erased.
B: Shooting Information Display Sample Image Taken in a Creative Zone Mode Protect images Exposure compensation amount Rating Flash exposure compensation amount Aperture Folder number File number Histogram (Brightness/RGB) Shutter speed Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Image-recording quality Playback number/ Total images recorded Eye-Fi transfer Y P O Color space Shooting date and time White balance correction C File size * Wi
B: Shooting Information Display Sample Image Taken in a Basic Zone Mode Ambience and ambience effects Shooting mode Lighting or scene * With images taken in the Scene Intelligent Auto or a Basic Zone mode, the information displayed will differ depending on the shooting mode. * Photos taken in the mode will show [Background blur].
B: Shooting Information Display About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [x2: xHistogram disp].
Even without a personal computer, you can easily do some image adjustments with the camera. Another fun thing about digital cameras. Post-Processing Images During Playback Y P O After shooting, you can apply Creative filters or resize the images (downsize the pixel count). C The camera may not be able to process images taken with another camera. Post-processing images as described in this chapter cannot be performed while the camera is connected to a personal computer via the terminal.
U Creative Filters You can apply Creative filters even during image playback. An image applied with a Creative filter during playback can be saved as a new image, leaving the original image intact. You can use the same Creative filters that are available during shooting (p.94). You can also apply Creative filters with the Q Quick Control screen. 1 Select [Creative filters]. Under the [x1] tab, select [Creative filters], then press . X The images will be displayed. an image.
U Creative Filters the filter effect. 4 Adjust Press the / button to adjust the filter effect, then press . For the Miniature effect, press the / button and select the image area (within the white frame) where you want the image to look sharp. Then press . By pressing the button, you can switch the white frame’s orientation between vertical and horizontal. Y P O the image. 5 Save Select [OK] to save the image.
S Resize You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. You can also resize with the Q Quick Control screen. 1 Select [Resize]. Under the [x1] tab, select [Resize], then press . X The images will be displayed. an image. 2 Select Select the image you want to resize. You can also select an image on the index display.
S Resize the image. 4 Save Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4. Press the button to return to the menu.
S Resize About Image Sizes The image size displayed in step 3 on page 262, such as [***M ****x****], has a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below. The asterisked image-recording quality figures do not exactly match the aspect ratio. The image will be cropped slightly. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 4 3456x2304 3072x2304 3456x1944 2304x2304 (8.0 megapixels) (7.0 megapixels) (6.7 megapixels) (5.
You can print your photos on various types of papers. Why not try a luxurious finish like that of a coffee table photobook? High-quality prints can offer another way to enjoy your photos in addition to viewing them on a screen. Printing Images Y P O Printing (p.266) You can connect the camera directly to a printer and print out the images on the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. C Digital Print Order Format (DPOF) (p.
Preparing to Print The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. Y P O the camera to the 3 Connect printer. Use the interface cable provided with the camera. Connect the cable to the camera’s terminal with the cable plug’s icon facing the front of the camera.
Preparing to Print wPictBridge back the image. 6 PlayPress the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. C Y P O Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer.
wPrinting The screen display and setting options will differ depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Press the / button to select the image to be printed. . 2 Press X The print setting screen will appear. Print setting screen Sets the printing effects (p.270).
wPrinting Q Setting the Paper Size Select the size of the paper loaded in the printer, then press . X The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in the printer, then press . X The page layout screen will appear. U Setting the Page Layout C Y P O Select the page layout, then press . X The print settings screen will reappear. Bordered The print will have white borders along the edges. Borderless The print will have no borders.
wPrinting printing effects. 4 SetSetthethem if necessary. If you do not need to set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option, then press . Select the desired printing effect, then press . If the icon is displayed brightly, you can also adjust the printing effect (p.272). Printing Effect Y P O Description EOn The image will be printed using the printer’s standard colors.
wPrinting the date and file number 5 Set imprinting. Set it if necessary. Select , then press . Set as desired, then press . of copies. 6 SetSettheit ifnumber necessary. Select , then press . Set the number of copies, then press . Y P O printing. 7 StartSelect [Print], then press . C The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer.
wPrinting e Adjustment of Printing Effects In step 4 on page 270, select the printing effect. When the icon is displayed brightly, you can press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Set the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again before printing. 1 On the print settings screen, select [Trimming]. 2 Set the trimming frame size, position, and aspect ratio. The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area may not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look in the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame may not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [x1] tab, select [Print order], then press . [Set up]. 2 Select Select [Set up], then press . C3 Set the option as desired. [Print type] Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Print type Date File number K L K L Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file number on the print. 4 Exit the setting. Press the <7> button. X The print order screen will reappear. Next, select [Sel.Image], [Byn], or [All image] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. By touching the LCD monitor with two fingers spread apart and then pinching the fingers, a three-image display will appear. You can then select images. To return to the single screen, touch the LCD monitor with two pinched fingers, then spread the fingers. Press the button to save the print order to the card.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 266. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [x1] tab, select [Print order]. 3 Select [Print]. Y P O [Print] will be displayed only if the camera is connected to a printer and printing is possible. 4 Set the [Paper settings] (p.268). C Set the printing effects (p.270) if necessary. 5 Select [OK].
p Specifying Images for a Photobook When you select images to use in photobooks (up to 998 images) and use EOS Utility (provided software) to transfer them to a computer, the selected images will be copied into a dedicated folder. This function is useful for ordering photobooks online and for printing photobooks on a printer. Specify One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press . [Select images].
p Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at one time. When [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or card will be specified. To cancel the image specification, select [Clear all in folder] or [Clear all on card].
After you learn how to use the camera, customizing its functions makes it easier to use. Customizing and becoming expert at your camera expands the joy of shooting. Customizing the Camera Y P O You can customize various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function number Select [Custom Functions (C.Fn)]. Under the [54] tab, select [Custom Functions (C.Fn)], then press . the Custom Function 2 Select number. Press the / button to select the Custom Function number, then press . Y P O the setting as desired. 3 Change Press the / button to select the setting (number), then press . Repeat steps 2 and 3 if you want to set another Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure 1 Exposure level increments 2 ISO expansion Still Photo Shooting Movie Shooting 2 2 2 2 p.285 2 2 p.286 2 - p.284 C.Fn II: Image 3 Highlight tone priority C.Fn III: Autofocus 4 AF-assist beam (LED) firing Y P O * If you use an EX-series Speedlite (sold separately) equipped with an LED light, the LED light will turn on for AF-assist even in the c, o, and d modes. C C.
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 0: 1: Exposure level increments 1/3-stop 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function SettingsN C.Fn II: Image C.Fn-3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Optimizer (p.159) is automatically set to [Disable] and the setting cannot be changed. With setting 1, noise (grainy image, banding, etc.) may become slightly more pronounced than with setting 0.
3 Custom Function SettingsN C.Fn III: Autofocus C.Fn-4 AF-assist beam (LED) firing You can enable or disable the AF-assist beam. 0: 1: Enable When necessary, the self-timer/AF-assist beam will emit the AF-assist beam. This setting is applicable also for LED-compatible external flashes. Disable The AF-assist beam is not emitted. C.Fn IV: Operation/Others C.Fn-5 0: 1: 2: 3: Shutter/AE lock button Y P O AF/AE lock AE lock/AF This is convenient when you want to focus and meter separately.
3 Custom Function SettingsN C.Fn-6 XL button function You can assign a frequently-used function to the button. While the camera is ready to shoot, press . 0: Normal (set center AF point) 1: Depth-of-field preview The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene on the LCD monitor, the depth of field will look narrow.
3 Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press . [Register to My Menu]. 2 Select Select [Register to My Menu], then press . the desired items. 3 Register Select an item to register, then press . On the confirmation dialog, select [OK] and press to register the item. You can register up to six items.
Reference Y P O This chapter provides reference information for camera features, system accessories, etc. C Certification Logo Under the [54] tab, if you select [Certification Logo Display] and press , some of the logos of the camera’s certifications will appear. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Using a Household Power Outlet With AC Adapter Kit ACK-E12 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. 1 Insert the DC Coupler. Open the cover and insert the DC Coupler until it locks in place. the DC Coupler. 2 Connect 1. Open the cover, 2. Insert the adapter’s plug into the coupler firmly. Y P O the power cord. 3 Connect Connect the power cord as shown in C the illustration.
Remote Control Shooting Remote Controller RC-6 (Sold Separately) This Remote Controller enables you to take pictures wirelessly up to approx. 5 meters/16.4 feet from the front of the camera. You can either shoot immediately or use a 2-sec. delay. Remote control sensor Set the self-timer to (p.136). Point the Remote Controller toward the camera’s remote control sensor and press the transmit button. X The camera will autofocus.
External Speedlites EOS-dedicated, EX-series Speedlites The basic operation is simple. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the automatic flash control is done by the camera. In other words, it is almost the same as using a built-in flash. For detailed instructions, refer to the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites.
External Speedlites FE Lock may not be correctly applied if the button is not held pressed for at least 1 second with the flash unit attached. When a flash unit is attached, the shutter will not be released if you press the shutter button completely at once. The shutter will only be released if you press and hold the shutter button for at least 1 second. With an EX-series Speedlite not compatible with flash function settings (p.
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card’s manufacturer.
Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button three times to exit the menu. the picture. 6 Take X The picture is transferred and the icon switches from gray (not connected) to one of the icons below. For transferred images, O is displayed in the shooting information display (p.256).
Function Availability Table According to Shooting Mode o: Set automatically k: User selectable Shooting Mode A : Not selectable/Disabled Basic Zone Creative Zone k C 2 3 4 5 6 F G d sfa k M All image quality settings k k k k k k k k k k k k k k k selectable Automatically set/ o o o o o o o o o k k k k o k Auto ISO ISO k k k k k speed Manual k k k k k k k k Picture Automatic selection o o o o o o o o o Style Manual selection k Ambience-based shots k k k k k k k Light/scene-based shots k k k k Auto o
Function Availability Table According to Shooting Mode Shooting Mode Continuous AF A Basic Zone Creative Zone k k k k k k k k k k k k k Movie Servo AF AF-assist beam Evaluative Metering metering mode Metering mode selection Program shift Exposure compensation Exposure AEB Drive k C 2 3 4 5 6 F G d sfa k M k k o o o o o o o o o k k k k o o o o o o o o o k k k k k k k k k k k k k k k k k k k AE lock Depth-of-field preview Single shooting Continuous shooting Q (10 sec.
System Map ST-E2** ST-E3-RT 90EX 270EX II 320EX 430EX II 600EX-RT/ Macro Ring Lite Macro Twin Lite 600EX MR-14EX MT-24EX Bundled Accessories Neck Strap EM-100DB Neck Strap EM-E1 C Y P O AC Adapter Kit ACK-E12 Wrist Strap ER-E1 Battery Pack LP-E12 Battery Charger LC-E12 or LC-E12E DC Coupler DR-E12 Body Jacket EH23-CJ Compact Power Adapter CA-PS700 * Confirm that all the bundled accessories are included in the camera’s package.
System Map GPS Receiver GP-E2* Remote Controller RC-6 EF-M lenses EF lenses EF-S lenses Mount Adapter EF-EOS M External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) C Y P O EOS DIGITAL Instruction Software Solution Disk Manual Instruction Manual TV/Video PictBridge-compatible printer Interface Cable (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.
3 Menu Settings Still Photo Shooting 1 (Red) Page Image quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 105 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 108 Grid display Off / Grid 1l / Grid 2m 205 z Histogram display Disable / Brightness / RGB - Release shutter without card Enable / Disable 204 Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 205 External Speedlite control Flash firing / E-TTL II metering / Flash sync. speed in Av mode / Flash function settings / Flash C.
3 Menu Settings Shooting 2 (Red) Page AF operation One-Shot AF / Servo AF 130 AF method u+Tracking / FlexiZone - Multi / FlexiZone Single 116 Continuous AF Enable / Disable 124 Focus mode AF / MF / AF+MF 116 Image Stabilizer Enable / Disable 46 Lens aberration correction Peripheral illumination: Enable / Disable Chromatic aberration: Enable / Disable 163 Shooting 3 (Red) Exposure compensation/AEB 1/3-stop or 1/2-stop increments, ±5 stops (AEB: ±2 stops) 155 ISO speed AUTO / 100 / 20
3 Menu Settings Shooting 4 (Red) Page Custom White Balance Manual setting of white balance 172 White balance shift/ bracketing WB correction: White balance correction BKT setting: White balance bracketing 174 175 Color space sRGB / Adobe RGB 176 Picture Style DAuto / PStandard / QPortrait / RLandscape / SNeutral / UFaithful / VMonochrome / WUser Def.
3 Menu Settings Playback 1 (Blue) Page Protect images Select images / All images in folder / Unprotect all images in folder / All images on card / Unprotect all images on card 252 Rotate image Rotate vertical images 233 Erase images Select and erase images / All images in folder / All images on card 254 Print order Specify images to be printed (DPOF) 275 Photobook Set-up Select images / All images in folder / Clear all in folder / All images on card / Clear all on card 279 Creative filters
3 Menu Settings Set-up 1 (Yellow) Page Select folder Create and select a folder 208 File numbering Continuous / Auto reset / Manual reset 210 Auto rotate OnzD / OnD / Off 214 Format card Initialize and erase data on the card 57 Eye-Fi settings Displayed when a commercially-available EyeFi card is used. 294 LCD auto off: 15 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min. 206 Camera auto off: 0 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min.
3 Menu Settings Set-up 3 (Yellow) Page Beep Enable / Touch to Screen color Select the shooting settings screen color 219 Feature guide Enable / Disable 60 Touch control Standard / Sensitive 63 Sensor cleaning / Disable Auto cleaning: Enable / Disable Clean now 204 225 Set when GPS device attached - Displays camera settings Display major camera settings 215 Certification Logo Display Display some of the logos of the camera’s certifications 289 Custom Functions (C.
3 Menu Settings Movies Shooting 1 (Red) Page Image quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 105 Grid display Off / Grid 1l / Grid 2m 205 z Histogram display Disable / Brightness / RGB 181 Release shutter without card Enable / Disable 204 Image review Off / 2 sec. / 4 sec. / 8 sec.
3 Menu Settings Shooting 3 (Red) Page Exposure compensation 1/3-stop or 1/2-stop increments, ±5 stops 155 ISO speed AUTO / 100 / 200 / 400 / 800 / 1600 / 3200 / 6400 / H 110 Auto Lighting Optimizer Metering timer Disable / Low / Standard / High Disable during manual exposure 4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3 Menu Settings Movie 1 (Red) Movie recording size Page 1920x1080 (6 / 5 / 4) / 1280x720 (8/7) / 640x480 (6/5) 187 Sound recording: Auto / Manual / Disable Sound recording Recording level 197 Wind filter/Attenuator: Disable / Enable Video snapshot: Enable / Disable Video snapshot Movie Servo AF Album settings: Create a new album / Add to existing album Snapshot length: 2 sec. movie / 4 sec. movie / 8 sec.
3 Menu Settings Playback 2 (Blue) Page x Histogram display Brightness / RGB 258 Image jump with 5 1 image / 10 images / 100 images / Date / Folder / Movies / Stills / Rating 232 Slide show Images (content) to play back / Display time / Repeat / Transition effect / Background music 243 Rating [OFF] / l / m / n / o / p 234 Control over HDMI Disable / Enable 249 Select folder Create and select a folder 208 File numbering Continuous / Auto reset / Manual reset 210 Auto rotate OnzD / OnD
3 Menu Settings Set-up 3 (Yellow) Page Beep Enable / Touch to Screen color Select the shooting settings screen color 219 Feature guide Enable / Disable 60 Touch control Standard / Sensitive 63 Sensor cleaning / Disable Auto cleaning: Enable / Disable Clean now 204 225 Set when GPS device attached - Displays camera settings Display major camera settings 215 Custom Functions (C.
Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery pack does not recharge. Check that the battery pack is properly attached to the battery charger. Check that the battery charger is properly connected to the power outlet. Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E12.
Troubleshooting Guide The battery becomes exhausted quickly. Use a fully-charged battery pack (p.32). The rechargeable battery pack performance will degrade over repeated use. Purchase a new one. The number of possible shots will decrease with any of the following operations: • Pressing the shutter button halfway for a prolonged period. (Often activating only the AF without taking a picture.) • Using the lens’ Image Stabilizer. • You shoot movies for prolonged periods.
Troubleshooting Guide Shooting-Related Problems No images can be shot or recorded. Make sure the card is properly inserted (p.34). Slide the card’s write-protect switch to the Write/Erase position (p.34). If the card is full, replace the card or delete unnecessary images to make room (p.34, 254). The card cannot be used. If a card error message is displayed, see page 36 or 323. The image is out of focus. Y P O Set the focus mode to (p.116).
Troubleshooting Guide When [FlexiZone - Multi] is set, it takes longer for the camera to focus automatically. Depending on the shooting conditions, it may take longer to focus the subject. Use [FlexiZone - Single] or focus manually. The continuous shooting speed is slow. Depending on the lens type, shutter speed, aperture, subject conditions, brightness, etc., the continuous shooting speed may become slower. During continuous shooting, the image on the LCD monitor seems to be out of focus.
Troubleshooting Guide The maximum burst during continuous shooting is lower. With (Handheld Night Scene) or (HDR Backlight Control) shooting mode, the maximum burst for continuous shooting will greatly decrease (p.87). With ISO 12800 or “H” (equivalent to ISO 25600), the maximum burst for continuous shooting will greatly decrease (p.111). With [Chromatic aberration: Enable], the maximum burst for continuous shooting will greatly decrease (p.164).
Troubleshooting Guide Even though I set a decreased exposure compensation, the image comes out bright. Set [A3: Auto Lighting Optimizer] to [Disable]. When [Standard/ Low/High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright (p.159). When I use the mode with flash, the shutter speed becomes slow.
Troubleshooting Guide High-speed sync cannot be set in the mode. Under [A1: External Speedlite control], set [Flash sync. speed in Av mode] to [Auto] (p.221). During shooting, the white icon or red icon is displayed. This icon indicates that the camera’s internal temperature is too high. The white icon indicates degraded still photo quality. The red icon indicates that the power will soon turn off automatically (p.128, 201). Movie shooting stops by itself.
Troubleshooting Guide The subject looks distorted during movie shooting. If you move the camera to the left or right quickly (high-speed panning) or shoot a moving subject, the image may look distorted. The image flickers or horizontal stripes appear during movie shooting. Flickering, horizontal stripes (noise), or irregular exposures can be caused by fluorescent light, LED bulbs, or other light sources during movie shooting. Also, changes in the exposure (brightness) or color tone may also be recorded.
Troubleshooting Guide Display Problems The menu screen shows few tabs and options. With Scene Intelligent Auto, Basic Zone modes, and the movie shooting mode, certain tabs and menu options are not displayed. Set the shooting mode to a Creative Zone mode (p.54). The file name’s first character is an underscore (“_”). Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.176). The file name starts with “MVI_”. It is a movie file (p.211).
Troubleshooting Guide The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or may look black. It will return to normal at room temperature. [Eye-Fi settings] does not appear. [Eye-Fi settings] will appear only when an Eye-Fi card is inserted in the camera.
Troubleshooting Guide When the movie is played back, camera operation noise can be heard. If you operate the camera’s dials or lens during movie shooting, the operation noise will also be recorded. Using an external microphone (commercially available) is recommended (p.197). The movie has still moments. During autoexposure movie shooting, if there is a drastic change in the exposure level, the recording will stop momentarily until the brightness stabilizes.
Troubleshooting Guide Sensor Cleaning Problems The shutter makes a noise during sensor cleaning. If you selected [Clean nowf], the shutter will make a noise, but no picture is taken (p.225). Automatic sensor cleaning does not work. If you repeatedly switch the power to <1>/<2> at a short interval, the icon may not appear (p.37). Printing-Related Problems Y P O There are fewer printing effects than listed in the instruction manual. What is displayed on the screen differs depending on the printer.
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Î Clean the electrical contacts on the camera and lens or use a Canon lens (p.19, 22). Y P O Card cannot be accessed. Reinsert/change card or format card with camera. Î Remove and insert the card again, replace the card, or format the card (p.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital single-lens non-reflex AF/AE camera SD memory card, SDHC memory card, SDXC memory card * Compatible with UHS-I Approx. 22.3 x 14.9 mm Canon EF-M, EF*, and EF-S* lenses * Mount Adapter EF-EOS M required. (35 mm-equivalent focal length is approx. 1.6 times the lens focal length) Canon EF-M mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 18.
Specifications Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens optical correction: Applicable to long exposures and high ISO speed shots Auto Lighting Optimizer Provided Peripheral illumination correction, Chromatic aberration correction • Autofocus Type: Hybrid CMOS AF System AF points: 31 points (Max.
Specifications • Shutter Type: Shutter speeds: Electronically-controlled, focal-plane shutter 1/4000 sec. to 1/60 sec. (Scene Intelligent Auto mode), X-sync at 1/200 sec. 1/4000 sec. to 30 sec., Bulb (Total shutter speed range. Available range varies by shooting mode.
Specifications • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: MOV Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 30p/25p * 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.976 fps, 60p: 59.94 fps, 50p: 50.00 fps File size: 1920x1080 (30p/25p/24p): Approx. 330 MB/min. 1280x720 (60p/50p) : Approx. 330 MB/min. 640x480 (30p/25p) : Approx. 82.5 MB/min.
Specifications • LCD Monitor Type: Monitor size and dots: Brightness adjustment: Interface languages: Feature guide: TFT color liquid-crystal monitor Wide, 7.7 cm (3.0-in.) (3:2) with approx. 1.04 million dots Manual (7 levels) 25 Displayable • Playback Image display formats: Single-image display, Single-image + Info display (Basic info, shooting info, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.
Specifications • Interface Audio/video OUT/ Digital terminal: Analog video (compatible with NTSC/PAL)/stereo audio output Personal computer communication and direct printing (Hi-Speed USB equivalent), GPS receiver GP-E2 connection HDMI mini OUT terminal: Type C (auto switching of resolution), CEC-compatible External microphone IN terminal: 3.
Specifications • Battery Charger LC-E12 Compatible battery: Recharging time: Rated input: Rated output: Working temperature range: Working humidity: Dimensions (W x H x D): Weight: Battery Pack LP-E12 Approx. 2 hours (at 23°C/73°F) 100 - 240 V AC (50/60 Hz) 8.4 V DC / 540 mA 5°C - 40°C / 41°F - 104°F 85% or less Approx. 65 x 25.5 x 90 mm / 2.6 x 1.0 x 3.5 in. Approx. 81 g / 2.9 oz.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of nongenuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
Digital Camera Model DS126391 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E12 & LC-E12E. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E12. Other types of batteries may burst, causing personal injury and other damage. 4.
Your digital images are very precious. Be sure to save them to your personal computer regularly. Downloading Images to a Personal Computer and Index Y P O This chapter explains how to download images from the camera to your personal computer, gives an overview of the software in the EOS DIGITAL Solution Disk (CDROM) provided with the camera, and explains how to install the software on your personal computer.
Downloading Images to a Personal Computer You can use the provided software to download the images in the camera to your personal computer. There are two ways to do this. Download by Connecting the Camera to the Personal Computer 1 Install the software (p.341). the provided interface cable 2 Use to connect the camera to your personal computer. Y P O Use the interface cable provided with the camera.
Downloading Images to a Personal Computer Downloading Images with a Card Reader If you have a commercially-available card reader, you can use it to download images to your personal computer. 1 Install the software (p.341). the card into the card 2 Insert reader. Y P O Canon software to download 3 Use the images/movies. C X Use Digital Photo Professional. X Use ImageBrowser EX. For details, refer to the Software Instruction Manual on the CD-ROM.
About the Software EOS DIGITAL Solution Disk This disk contains various software applications for EOS DIGITAL cameras. EOS Utility With the camera connected to a personal computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use EOS Utility to set various camera settings. Also, you can copy background music tracks, such as EOS Sample Music*, to the card. * Five original background music tracks are provided by Canon.
Installing the Software Do not connect the camera to your computer before you install the software. Otherwise, the software will not be installed properly. Even if your personal computer already has ImageBrowser EX installed, install ImageBrowser EX included on the CD-ROM that came with your new camera. It is the latest version with features optimized for your camera. You can also use the auto update feature to add the latest functions.
Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] folder to your computer. Y P O Instruction Manual PDFs with the names below are copied.
Index Numerics BGM ............................................. 246 10-sec. or 2-sec. delay..................136 Black-and-white image ... 89, 115, 169 1280x720 ......................................187 Bracketing ............................ 155, 175 1920x1080 ....................................187 Brightness (exposure) .................. 153 Auto exposure bracketing (AEB) ............................... 155, 284 Autoexposure lock (AE lock).... 157 Exposure compensation ..........
Index Color tone .....................................168 Continuous....................................210 Continuous shooting .....................133 Contrast ........................................168 Copyright information....................212 Creative Auto ..................................75 Creative filters.........................94, 260 M icon..............................................4 Creative Zone modes .....................25 Custom Functions.........................282 Custom WB........
Index Manual focusing .......................126 Out of focus ..................46, 48, 123 Recompose ................................71 Folder Create/Select .....................208 Format (card initialization)...............57 Frame rate ....................................187 Full Auto (Scene Intelligent Auto) ...66 Full High-Definition (Full HD)................................187, 237 G Grainy B/W......................................96 Grid display ...................................
Index Shooting settings display............24 Lens ..........................................27, 44 Chromatic aberration correction..................................164 Image Stabilizer..........................46 Lock release ...............................45 Peripheral illumination correction..................................163 Light/scene-based shots.................92 Live View shooting Aspect ratio ..............................108 Continuous AF..................116, 124 Face+Tracking................
Index Night Portrait ...................................83 Pressing halfway ............................ 49 Night scene ...............................83, 85 Printing ......................................... 265 Layout ...................................... 269 Paper settings .......................... 268 Photobook Set-up .................... 279 Print Order (DPOF) .................. 275 Printing effects ......................... 270 Tilt correction............................ 273 Trimming ...........
Index Sepia (Monochrome) ..............89, 169 Servo AF.......................................131 Sharpness.....................................168 Shooting information display.........256 Shooting mode................................25 Av (Aperture-priority AE) ..........144 M (Manual exposure) ...............148 P (Program AE) ........................102 Tv (Shutter-priority AE).............142 A (Scene Intelligent Auto) .......66 C (Creative Auto) .....................75 2 (Portrait) ...................
MEMO C Y P O 349
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
