Service Manual

Canon NEW F-1 Service manual
Page 22
8. Sprocket
Lozoid: Loroid 72090
Assembly and adjustment notes
1. Lubricate the upper and lower
sprocket bushings with PL-015.
2. Adjust thrust play to 0.1 to
0.2mmm with washer (8).
3. Align the toothless section of the
main gear with the stopper notch
in the sprocket shaft (3)
4. Adjust thrust play of the main gear
to 0.03 to 0.15mm by-
washer (4).
5. Align the main gear (2) and idler
gear (12) as shown below and
mesh them.
The protuding striker section should be as
shown ±2 teeth.