Service Manual

Canon NEW F-1 Service manual
Page 68
18. Water resistant treatment
1. Inject silicone in the space between
the front panel and the lower body
"obi" (band).
2. Put the rubber seal in the groove and
apply silicone (KE-347B) on it.
3. Apply grease (GE-C9) between the
shutter button'assembly and the
release lock ring.
4. Use the teflon washer in the release
lock lever.
5. Place the teflon washer in the shutter
dial seat under the shutter dial.
6. Put two types of teflon washers in the
ASA dial.