Operation Manual

1-3
Unpacking
1
SETTING UP
Removing the shipping materials ______________
Remove the shipping materials as shown below.
1
Remove the shipping tapes from the top
of the fax.
2
Remove the protective piece from the
multi-purpose tray.
3
Open the operation panel partially by
gently pulling it towards you (it only
opens slightly).
4
Remove the protective sheet from the
Automatic Document Feeder (ADF).
Close the operation panel by pressing it
down from the centre until it locks into
place.
5
Open the printer cover using the printer
cover tab. (see p. 2-2)
6
Remove the shipping tape from the side
of the fax.
Close the printer cover.
The actual shipping materials may differ in shape, quantity, and position from the ones shown above.
Downloaded from www.Manualslib.com manuals search engine