Operation Manual
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
7-5
USING TAM MODE (FAX-B840 only)
7
Setting TOLL SAVER ___________________________
Setting TOLL SAVER allows you to check whether you have any new messages when you call
from a remote location.
1
Press [Function].
Press [Start/Copy].
2
Use [ ] or [ ] to select TAM SETTINGS.
Press [Start/Copy].
3
Use [ ] or [ ] to select TOLL SAVER.
Press [Start/Copy].
4
Use [ ] or [ ] to select ON.
• When TOLL SAVER is set to ON and there are telephone messages, the fax will ring twice before
answering the call.
• When TOLL SAVER is set to ON and there are no telephone messages, the fax will ring five times
before answering the call.
Press [Start/Copy].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
USER SETTINGS
MESSAGE LENGTH
ON