Operation Manual

14 Before Using Your Machine

Document Requirements

 Types of Document You Can Scan

 Problem Documents

z To prevent document jams in the Document Tray, do not attempt to load the following types of

documents into the fax:

z Remove all staples, paper clips, etc. before loading the document into the Document Tray.

z Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the

document into the Document Tray.

z Make a photocopy of any document that will not feed into the fax so that you can then load the

copy into the Document Tray.

z Scanned Area

The actual area scanned by the fax is

shown below.

z Size

You can load documents larger than 105

mm wide and 105 mm long.

The maximum size of document that can be

loaded is 216 mm wide by 400 mm long.

Note

If you use documents smaller than A4 size, align the document with the left Document Guide.

- Wrinkled or creased paper

- Torn paper

- Coated paper or glossy paper

- Thick paper

- Curled or rolled paper

- Carbon paper or carbon-backed paper

- Onion skin or thin paper

- Envelopes

3.0 ±3.0 mm

292 mm

2.0 ±2.0 mm

208 mm

1.0 ±3.5 mm 1.0 ±3.5 mm

Min.

105 mm

Min.

105 mm

Max.

400 mm

Max. 216 mm