Operation Manual

1Introduction
Introduction
Useful Information
z Replacing a FINE Cartridge
When the ink in the FINE Cartridge starts to run out, the machine will switch to memory reception
of faxes.
z One-touch and Coded Dial Numbers
You can register One-touch and Coded Dial numbers in your fax machine to make sending faxes
easier and faster.
z Different Ways to Receive Faxes
There are several different ways to receive faxes using this machine. Select the one that most
suits your needs.
z Deleting Faxes from the Memory
When the ink level is low faxes will be received into the memory. Once 30 transmissions have
been received reception will no longer be possible, so be sure to print out and delete
unnecessary faxes from the memory.
z Deleting Messages from the Memory
Answering machine messages are also stored in the machine's memory. Again delete
unnecessary messages to free up memory for new messages.
z Clearing Documents and Paper Jams
In the unlikely event that your machine jams you will need to remove the jammed paper.
See “Printing a Document in Memory” on page 35
See “Replacing a FINE Cartridge” on page 57
See “Aligning the FINE Cartridge” on page 60
See “Registering One-touch Speed Dialing Numbers and Names” on page 12
See “Registering Coded Speed Dialing Numbers and Names” on page 13
See “Setting the Receive Mode” on page 28
See “Printing All Unprinted Documents in Memory” on page 35
See "Deleting All Printed Documents from Memory" on page 36
See “Deleting Messages” on page 41
See “Paper Jams” on page 65