Operation Manual

41Using TAM Mode (FAX-JX500/JX300 only)
Deleting Messages
1
Press [Menu].
2 Use [{] or [}] to select <MSG REGISTRATION>, then press [Start/Copy].
3 Use [{] or [}] to select the type of message you want to delete, then press [Start/
Copy]. The LCD displays <PLAY>.
4 Use [{] or [}] to select <DELETE>, then press [Start/Copy].
5 Press [Stop].
The fax returns to standby mode.
Playing Telephone Messages
Telephone messages will be played back in order from the oldest message recorded. If a voice
memo has been recorded, it will be played back first.
1 Press [Play].
The day and time when the telephone message was recorded, the number of telephone
messages and the number of the message being played (ICM No.) are displayed whenever a
message is played.
Follow the procedures below to delete all messages.
1 Press [Delete]. The LCD displays <YES=( ) NO=(#)>.
2 Press [ ] to delete all messages.
z A voice memo is not deleted (see page 41).
z If you decide not to delete all messages, press [#].
Note
You cannot delete the <OUTGOING MESSAGE>. The old outgoing message will be automatically
deleted when you record your new message.
Note
z Press [ ] to listen to the message again. (Repeat)
z Press [ ] to play the next message. (Skip)
z Press [ ] twice to play the previous message.
z Press [Stop] to stop playback.
z Press [Delete] during playback to delete a message.
z Use [{] or [}] to change the volume.
SUN 17:15 02/05