Operation Manual

28 Receiving Faxes
Setting the Receive Mode
Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive
Mode/Resolution].
1 Press [Receive Mode/Resolution].
Every time you press [Receive Mode/Resolution], the mode changes cyclically.
 Receiving Faxes
 Receiving Both Documents and Telephone Calls Automatically: Fax/Tel
Mode
If you set Fax/Tel mode, you can control precisely how the fax handles incoming calls by
adjusting the following settings:
z Adjust the time the fax takes to check whether a call is from a fax machine or a telephone
(<RING START TIME> setting).
z Adjust the length of time the fax rings when the call is a voice call (<TEL RING TIME>
setting).
z Set whether the fax switches to receive mode after the ring time set in <TEL RING TIME> has
elapsed (<DEFAULT ACTION> setting).
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4 Use [{] or [}] to select <FAX/TEL AUTO SW>, then press [Start/Copy]. The LCD
displays <RING START TIME>.
5 Press [Start/Copy].
6 Use the numeric buttons, or [{] or [}] to enter the time the fax waits before ringing
when it receives a call, then press [Start/Copy] twice.
7 Use the numeric buttons, or [{] or [}] to enter the time the fax rings while waiting
for someone to pick up the Handset, then press [Start/Copy] twice. The LCD
displays <RECEIVE>.
Note
z If paper jams, see “Troubleshooting” on page 65.
z If the Ink Lamp lights up faxes will be received to memory.
8SEC.
22SEC.