Operation Manual

40 Using TAM Mode (FAX-JX500/JX300 only)
4 Use [{] or [}] to select <TOLL SAVER>, then press [Start/Copy]. The LCD
displays <ON>.
5 Use [{] or [}] to select <ON>, then press [Start/Copy].
6 Press [Stop].
Setting ends and the fax returns to standby mode.
Recording Voice Memos
Use this feature when you are going out and want to leave a message for another member of the
family. Use the Handset on the fax to record your voice memo.
Only one voice memo, 60, 120, or 240 seconds*, can be recorded. If you record a new voice memo
when there is already a voice memo recorded, the old voice memo will be deleted.
1 Press [Menu].
2 Use [{] or [}] to select <MSG REGISTRATION>, then press [Start/Copy].
3 Use [{] or [}] to select <VOICE MEMO>, then press [Start/Copy].
4 Use [{] or [}] to select <RECORD>, then press [Start/Copy]. The LCD displays
<LIFT HANDSET>.
5 Pick up the Handset. Press [Start/Copy] and speak into the Handset to record your
voice memo.
The remaining recording seconds is displayed on the LCD.
6 Press [Stop] when recording is finished. The LCD displays <REPLACE
HANDSET>.
7 Hang up the Handset and press [Stop].
The fax returns to standby mode.
* The recording time for a voice memo can be set to the same settings as the recording time
for a telephone message. However, if you set 0 as the recording time for each telephone
message, voice memo recording time will be set to 60.
Note
To play a voice memo, carry out step 1 to 3, select <PLAY> and then press [Start/Copy].