Operation Manual

2-49
FAX-L1000 Chapter 2: Operating Instructions
3.3.5 Explanation of SSSW (Service Soft Switch Settings)
The items registered and set by each of these switches comprise 8-bit switches. The figure
below shows which numbers are assigned to which bits. Each bit has a value of either 0 or 1.
Figure 2-42 Bit Switch Display
See the chart in the service menu shown in Section 3.3.4 Service data flowchart to see
effective bits and their default values. The meanings (functions) of the bits are not described
in this manual except the new switches added to this model. See
G3 Facsimile SERVICE
DATA HANDBOOK (Rev. 0) (supplied separately)
for details of the switches.
Below are examples showing how to read bit switch tables.
Figure 2-43 How to Read Bit Switch Tables
Do not change the settings of switches listed as “Not used”.
SW01
00000000
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3
Bit 2
Bit 1
Bit
0
Service error code
Error dump list
Receive image transfer
Not used
Not used
Not used
Not used
Not used
Output
Output
Yes
Function
0
1
2
3
4
5
6
7
Bit 1 0
Indicates that the
setting is "1".
Figures in boldface
are default settings.
Indicates that the
setting is "0".
Not Output
Not Output
No