Operation Manual

2-57
FAX-L1000 Chapter 2: Operating Instructions
#7 PRINTER
Service soft switch settings
SW04 (switch 04: reduction/cassette selection settings)
Bit Function 1 0
0 (New) When LTR/LGL specification No Yes
is received by DCS, the
cassette is selected according
to the specification.
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit 0]
Selects whether or not the recording paper is selected according to the DCS specification
when the other fax machine specifies LTR or LGL in DCS signal during reception. If it is
0, the specified recording paper is used regardless of the paper length. If it is 1, the
receiving station selects the recording paper. This switch is valid when #1 SSSW, SW05
bit 5 is 0.