Operation Manual

2-76
FAX-L1000 Chapter 2: Operating Instructions
3.4.7 Faculty tests
The faculty tests are selected by pressing the numeric key 6 from the test mode menu. These
tests test the following faculties of this fax.
Test type Overview
Sensor tests Test whether the sensors are operating correctly.
Operation panel test Tests whether the key switches on the control panel are
operating correctly.
Stamp test Tests whether the stamp function is operating correctly.
a) Sensor tests
The sensor test is selected by pressing the numeric key 3 from the faculty test menu. In this
test, you can check the status of each sensor of this fax in items 1 to 3 on the display.
You can also check if sensors that use actuators and microswitches are operating correctly
by moving the actuator or microswitch.
Items 4 and 5 are not used in the field.