Operation Manual

4-16
FAX-L1000 Chapter 4: Maintenance and Service
3.11 Transfer Charging Roller
a) Preparations for cleaning
(1) Disconnect the power cord of the fax from the power source.
(2) Lift the document feeder tray, the document output tray and the upper output tray.
(3) Open the printer cover and remove the toner cartridge.
Store the cartridge in its original protective bag to avoid exposure to light.
(4) Raise the left-most end of the transfer charging roller shaft clear of the transfer roller
mount (right side) using the precision slot head screwdriver.
(5) Remove the transfer charging roller.
Figure 4-11 Preparation for Cleaning
Hold the shaft.
Hold the shaft.
Transfer charging roller