Operation Manual

4-35
FAX-L1000 Chapter 4: Maintenance and Service
4. ADJUSTMENT
4.1 Parts Replacement
Please refer to the separate PARTS CATALOG for disassembly / assembly procedures to
follow when replacing parts. The PARTS CATALOG shows illustrations which follow the
disassembly procedures. Additionally, there are enlarged and special-help illustrations for parts
which require caution during disassembly and assembly. Also, the notes of caution written in
the illustrations are items where special caution is necessary.
4.2 Points to Grease
There are parts which have grease applied to make their operation smooth and to increase
electrical conductivity. Apply grease when replacing parts where grease is applied or when
grease has come off.
Please refer to the separate
PARTS CATALOG regarding locations to apply grease.
4.3 Adjustment items
This fax requires the following adjustments.
Item When
Leading edge margin When the ECNT board or the laser/scanner unit is
replaced.