Operation Manual

4-37
FAX-L1000 Chapter 4: Maintenance and Service
(7) Make several test prints again, and perform step (5). Check that the leading edge
margin is 2.0mm.
If the value is incorrect, repeat steps (4) to (7).
Figure 4-44 Leading Edge Margin Adjustment
Leading edge of paper
Leading edge margin
Clockwise
Turning one scale increases the leading edge
margin approx. 0.02" (0.6 mm).
Counterclockwise
Turning one scale decreases the leading edge
margin approx 0.02" (0.6 mm).
Clockwise
Counterclockwise
SW501
VR501