Operation Manual

5-50
FAX-L1000 Chapter 5: Appendix
• Two sheets of paper are fed to the duplexing unit when the duplex delivery
has been selected.
• The duplexing unit was eliminated from the delivery unit configuration
when the option delivery slot has been selected.
3. The cassette is not set in the printer when the paper feeder is selected as the
paper pick-up source.
4. The duplexing unit is not connected correctly.
5. The paper feeder is not connected correctly.
6. The envelope feeder is not connected correctly.
7. Monitored value set by VR501 on the engine controller. The value is
expressed by 8 bit data (256 steps).
The value of the data becomes +40 (-40) when the start position of the laser
is moved backward (forward) by 1 mm via VR501.