Operation Manual

5-122
FAX-L1000 Chapter 5: Appendix
ISDN BASIC Numeric parameter
No. Function Selecting range Default setting
16 Fallback Wait Time 0-255 (×100msec.) 0 (0msec.)
18 progress description of 0-127 3
3.1kHz-audio call-time
19 progress description of 0-127 3
speech call-time
[No.16]
This parameter sets the time to wait between releasing the call and trying the call again
when automatic G4/G3 fallback and automatic 3.1kHz-audio/Speech are done.
[No.18]
The progress description of the Progress Indicator information element included in the
SETUP message can be set for outgoing 3.1kHz-audio calls. The values defined for the
progress description are only 1-5 and 8.
No. Progress Description
1 Calling is not end-to-end ISDN; further call progress information may be
available in-band
2 Destination address is non ISDN
3 Origination address is non ISDN
4 Call has returned to the ISDN
5 Interworking has occurred and has resulted in a telecommunication service
change
8 In-band information or an appropriate pattern is now available
This setting is available when ISDN BASIC Bitswitch SW01 bit5 under the #4C ISDN
BASIC menu is “1.”
[No.19]
The progress description of the Progress Indicator information element included in the
SETUP message can be set for outgoing speech calls. The values defined for the progress
description are only 1-5 and 8.
No. Progress Description
1 Calling is not end-to-end ISDN; further call progress information may be
available in-band
2 Destination address is non ISDN
3 Origination address is non ISDN
4 Call has returned to the ISDN
5 Interworking has occurred and has resulted in a telecommunication service
change
8 In-band information or an appropriate pattern is now available
This setting is available when #4C ISDN BASIC Bitswitch SW01 bit4 is “1.”