Operation Manual

5-127
FAX-L1000 Chapter 5: Appendix
ISDN G3 Bitswitch SW01
Bit Function 1 0
0 Enforced G3 calling Yes No
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
[Bit0]
For all outgoing calls, it is possible to set whether or not to enforce G3 calling. For example,
when enforced G3 calling is set to “Yes,” the call will be made with G3 even if 1-touch dial
or speed dial designated as communications mode G4 is used.
ISDN G3 Numeric parameter
No. Function Selecting range Default setting
01 Output time of DTMF 10-9999 90 (90msec.)
signal output
02 Minimum pause time of 10-9999 90 (90msec.)
DTMF signal output
[No.01]
It is possible to set the time of the DTMF signal transmission.
[No.02]
It is possible to set the minimum pause time of the DTMF signal transmission.