Operation Manual

5-177
FAX-L1000 Chapter 5: Appendix
##1030 [TX/RX] Response to status enquiry.
Cause: Indicated above
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in D-channel connection
error
in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
##1031 [TX/RX] Normal, unspecified.
Cause: Indicated above
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in
D-channel connection
error in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
##1032 [TX/RX] Look of outgoing connection
Cause: Indicated above
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in
D-channel connection
error
in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
##1033 [TX/RX] Other party is busy
Cause: Indicated above
Solutions: (1) Re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in D-channel connection
error
in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.