Operation Manual

5-193
FAX-L1000 Chapter 5: Appendix
• B-channel error codes
##1255 [RX] B-channel was disconnected without the document being started
Cause: After the negotiation procedure on the transmitting side, a
disconnection occurred without the document being transmitted.
Solutions: (1) Have the transmitted party set the document properly
(2) Output a communications analysis list, and analyze it.
##1309 [TX/RX] Abnormal post-reception checkpoint reference number
(page number)
Cause: The page is completed, and the checkpoint reference number which
is the parameter used during CDE, CDPB, RDEP or RDPBP is
abnormal (a series of long, non-numeric parameters, etc.)
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
##1321 [TX/RX] 1-page transmission time-out
Cause: Indicated above
Solutions: (1) Lower the document’s transmission resolution, then re-establish
communication.
(2) Output a communications analysis list, and analyze it
##1322 [RX] Other machine’s terminal properties abnormal (session
procedures)
Cause: As a result of negotiation, the attributes of the terminal which show
session user data are abnormal (abnormality in a non-G4 facsimile
parameter, etc.)
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
##1323 [TX] RSSN reception
Cause: Compared with CSS transmission, the receiving side transmitted
RSSN
Solutions: (1) Re-transmit
(2) Output a communications analysis list, and analyze it.
##1332 [TX/RX] Other terminal’s properties are abnormal (Document procedures)
Cause: As a result of negotiation, the attributes of the terminal which show
session user data are abnormal (abnormality in a non-G4 facsimile
parameter, etc.)
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.