Operation Manual

5-213
FAX-L1000 Chapter 5: Appendix
b-11)
Tighten the screw at the top of the memory slot cover to secure it
in position.
b-12)
Performing a Cold Reset. Please refer to 3.10.2 Service Opera-
tions: c) Cold Rest when performing a Cold Reset.
NOTE
• Replace the side cover after you have finished adding the DIMM boards.
• Plug in the power cord and any interface cables you removed from the
rear of the printer.
• Reconnect the telephone line to the fax jack marked
.
• Reconnect the end of the handset connector cord to the extension phone
jack marked and place the handset on the handset cradle.