User`s guide

Chapter 2 Setting Up 2-15

Setting Up

Follow this procedure to load a stack (maximum 10 mm stack height) of A4-size plain

paper in the multi-purpose tray:

1 Remove the multi-purpose tray cover

from the FAX.

2 Prepare a stack of paper by tapping

it on a flat surface to even its edges.

3 Open the paper guides to the

approximate width of the stack.

4 Insert the stack into the multi-purpose

tray q (print side facing you and top

edge first), then adjust the paper

guides to the width of the paper w.

• Make sure there are no gaps between

the paper guides and the paper stack.