Specifications

87
Troubleshooting
Resolve a Displayed Message
This section describes some of messages related to the toner, memory, and paper.
For more details about other messages, see [Troubleshooting] 
[Onscreen Messages] in the e-Manual.
Message Action
<Prepare toner
car
tridge.>
• The toner cartridge needs to be replaced soon. Prepare the
replacement toner cartridge (→p.76).
<Toner is nearly
out.
>
• When the toner is evenly distributed inside the cartridge, it can be
used for some time. If this message does not disappear, replace
the toner cartridge (→p.76).
If this message is displayed while receiving a fax, the incoming fax
will be stored in the memory without being printed.
Reports may not be printed, even if they are set to be printed
automatically.
<Memory is full.>
• If there are any jobs waiting to be sent or printed, wait until the
jobs are complete.
• Split the job into smaller subsets or reduce the scanning resolution
and try to send them again (→p.51).
<Memory is full.
Scanning c
anceled.
Print?>
• Print pages successfully scanned or cancel the job.
• Split the job into smaller subsets or change the <Original Type>.
Change the document type in <Photo -> ... -> Tex t> order.
<Cart. parts life
end. R
eplcmnt.
recommended.>
The toner cartridge needs to be replaced soon. Prepare the
re
placement toner cartridge. If Canon genuine toner cartridge is not
used, this message can appear.
We recommend Canon genuine toner cartridges as replacement
toner cartridges.
<Incorrect Size/
Sett
ing>
• Change the <Paper Settings> to the size of the loaded paper
(→p.26).
• When printing with the printer driver, verify that the paper size
setting on the computer is correct.
<No Paper: Drawer
1>
Load paper same as the paper type displayed on the screen (
→p.22).