MP330.
MP330.book Page ii Tuesday, October 22, 2002 3:21 PM Copyright © 2002 by Canon, Inc. All rights reserved. This manual may not be reproduced in any form, in whole or part, without the prior written consent of Canon, Inc. Trademark Acknowledgments Canon is a registered trademark of Canon, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. All other trademarks identified herein are the property of their respective owners.
MP330.book Page iii Tuesday, October 22, 2002 3:21 PM Contents Chapter 1 Introduction.....................................................................................................1-1 Printer Driver: an Overview ..........................................................................1-2 System Requirements .....................................................................................1-2 About This Guide.........................................................................................
MP330.book Page iv Tuesday, October 22, 2002 3:21 PM Chapter 4 Frequently Asked Questions........................................................................4-1 Printer Cannot Be Initialized. ........................................................................4-2 Installation Is Displaying Unexpected Behavior. .......................................4-2 Documents Are Not Printing Correctly........................................................4-4 Paper Is Not Loading Correctly.....................
Chapter 1 1Introduction Welcome and congratulations on your purchase of the Canon FAXPHONE L75 (also referred to in this guide as the printer) and its accompanying printer driver software. Contents of this chapter: ❏ Printer Driver: an Overview ..................................................................1-2 ❏ System Requirements .............................................................................1-2 ❏ About This Guide ...........................................................................
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM Printer Driver: an Overview 1 The printer driver is software that enables the printer to communicate with your computer. You can use the printer as the default printer in any Windows application that supports printing.
❏ Memory • Windows 98/Me: 32 megabytes (MB) of RAM. 64 MB of RAM or more is recommended. • Windows 2000/XP: 64 MB of RAM. 128 MB of RAM or more is recommended. ❏ Hard Disk Space 15 MB of available hard disk space ❏ Disk Drive CD-ROM drive, or access to one over a network connection ❏ Monitor 256-color SVGA monitor or greater ❏ Printer Cable A USB cable 5 meters (16.4 feet) in length or shorter.
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM About This Guide 1 This guide assumes you have a basic understanding of Windows. This includes how to start your system and navigate within the Windows environment. You should be familiar with common Windows terms such as window, dialog box, button, icon, menu, application, select, open, close, click, double-click, drag, and list box. For assistance in familiarizing yourself with Windows, refer to your Microsoft Windows user documentation.
Monospaced text Used for commands you might type when installing the software, or system messages that may display on your screen. For example: A:\SETUP Capitalization Used for all the key words in the name or title of an option on the screen. For example: In the dialog box, click Image Type to set.... Other User Assistance 1 In addition to this guide, the following online information and instructions are available.
MP330.
MP330.book Page 1 Tuesday, October 22, 2002 3:21 PM Contents of this chapter: ❏ ❏ ❏ ❏ Before You Begin the Installation: a Checklist ....................................2-2 Installing the Software............................................................................2-3 Setting the Default Printer......................................................................2-6 Sharing the Printer Installation .............................................................
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM Before You Begin the Installation: a Checklist 2 To ensure a smooth and successful installation, take some time before you begin to plan and prepare for the installation process. ❏ Do not connect. Do not connect the printer cable to the port on your computer at this time. When you begin the installation of the software, the installation program will prompt you when it is appropriate to connect the printer to your computer.
If your current printer purchase is replacing a MultiPASS printer, you must remove the MultiPASS software installed on your system before installing the new printer. For instructions on removing the MultiPASS software, see the software user’s guide that came with your MultiPASS software. Installing the Software 2 You are ready to install the software once you have prepared your system, as described in the “Before You Begin the Installation: a Checklist” section.
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM If installation does not start automatically: • On the Windows desktop, click Start, and then click Run. • In the Run dialog box, type the following command and click OK (where D: is your disk drive containing the installation disk). D:\SETUP.EXE 4. Follow the on-screen instructions to complete the installation process. During installation, follow these guidelines: 5. • Click Next to move from one dialog box to the next.
MP330.book Page 5 Tuesday, October 22, 2002 3:21 PM The system displays messages indicating that the driver for your printer is being installed. For Windows 98/Me: Wait for the system to complete the installation of the printer driver. For Windows 2000/XP: See Step 7. 7. For Windows 2000/XP: When the Found New Hardware Wizard appears during the setup, and prompts you for additional information, conduct the following: For Windows 2000 Chapter 2 • Search for a suitable driver for the printer.
MP330.book Page 6 Tuesday, October 22, 2002 3:21 PM For Windows XP • 8. Select Install the software automatically (Recommended). When the setup is finished, if prompted, restart Windows. The installation program determines whether Windows needs to be restarted on your system. Setting the Default Printer 2 When you install the printer driver software, the system automatically sets the printer as the default printer. If necessary, however, follow these instructions to set the default printer.
MP330.book Page 7 Tuesday, October 22, 2002 3:21 PM To use your printer, the client systems must have the printer driver software installed on them. The software can be installed on the client systems directly from your system.
MP330.book Page 8 Tuesday, October 22, 2002 3:21 PM 5. In the Share Name box (Windows 98/Me/XP) or Shared As box (Windows 2000), type a name you want to assign to the shared printer. If available, you may also want to assign a password, which would then be required by the client system when using the printer. 6. If your situation matches the following, set up an alternate driver: • Windows 2000/XP server system sharing with Windows 98/Me client systems.
MP330.book Page 9 Tuesday, October 22, 2002 3:21 PM Removing the Printer Driver 2 To remove the printer driver: 1. On the Windows desktop, click Start, point to Settings, and then click Control Panel (in Windows XP, click Start, and then click Control Panel). 2. In Control Panel, double-click Add/Remove Programs (in Windows XP, double-click Add or Remove Programs). 3.
MP330.
MP330.book Page 1 Tuesday, October 22, 2002 3:21 PM Chapter 3 3Printing ❏ Printing a Document...............................................................................3-2 ❏ Defining Print Settings: an Overview...................................................3-2 • Viewing a Summary of Print Settings ...........................................3-5 ❏ Defining Page Settings............................................................................3-6 • Defining a Custom Paper Size......................
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM Printing a Document 3 Once you have installed the software, you are ready to print a document, from any Windows application that supports printing, such as Word for Windows. Predefined printer settings are initially installed, enabling you to print immediately. These settings determine what your documents look like when printed. For example, they define such settings as the paper size and page orientation.
MP330.book Page 3 Tuesday, October 22, 2002 3:21 PM You can change a number of print settings, such as the paper size, page layout, resolution, and halftoning method. If you use certain print settings often, you can save the settings as a print profile and reuse the profile as needed. The following instructions summarize the general procedures for changing printer settings, based on your version of Windows.
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM 4. To accept the changes and close the dialog box, click OK. To accept the changes and leave the dialog box open, click Apply. To cancel the changes and return to the default settings, click Restore Defaults. To close the dialog box without accepting any changes, click Cancel. To define print settings (Windows 2000/XP): 1.
MP330.book Page 5 Tuesday, October 22, 2002 3:21 PM 4. To accept the changes, close the dialog box, and print the document, click OK. If available, to accept the changes and leave the dialog box open, click Apply. To cancel the changes and return to the default settings, click Restore Defaults. Viewing a Summary of Print Settings 3 As you work with the individual print settings on the different tabs, you can view a summary of the current settings at any time.
MP330.book Page 6 Tuesday, October 22, 2002 3:21 PM Defining Page Settings 3 Page settings determine the following print results, as defined on the Page Setup tab in the Properties dialog box (Windows 98/Me) or Printing Preferences dialog box (Windows 2000/XP). ❏ Page Size Click the size of the page you want to use for your printed document. Usually, the page size specified here is the page size you specified when you created your document in the Windows application.
MP330.book Page 7 Tuesday, October 22, 2002 3:21 PM ❏ Orientation Click Portrait or Landscape to determine how your document is oriented on the page when printed. Portrait prints the content of your document across the narrower dimension of a rectangular sheet of paper. Landscape prints the content of your document across the wider dimension of a rectangular sheet of paper.
MP330.book Page 8 Tuesday, October 22, 2002 3:21 PM 2. In the Custom Paper Size Setting dialog box, under Custom Paper List, click an existing form name. 3. If you want to assign a new name to the custom-sized form you are defining, type a name in the Name box. 4. Click the unit of measure by which you want to define the size of your paper. 5. In the Paper Size boxes, type or click the width and height of the custom size. You must set the height greater than the width. 6.
MP330.book Page 9 Tuesday, October 22, 2002 3:21 PM Meeting Size Requirements When defining the custom form, the size and printer area margins you set must meet certain requirements. When setting the custom size: The width and height must meet the following minimum and maximum measurements: ❏ Width: 3.00 inches (7.62 cm) to 8.50 inches (21.59 cm) ❏ Height: 5.00 inches (12.70 cm) to 14.00 inches (35.56 cm).
MP330.book Page 10 Tuesday, October 22, 2002 3:21 PM Defining and Assigning the Custom Form First, you need to define the custom-sized form to make it available on your system. Next, you assign the newly defined form as an available setting in your printer driver. To define a custom form on your system: 1. On the Windows desktop, click Start, point to Settings, and then click Printers (in Windows XP, click Start, and then click Printers and Faxes). 2.
MP330.book Page 11 Tuesday, October 22, 2002 3:21 PM 6. In the Paper Size boxes, type the width and height of your form. 7. In the Printer Area Margins boxes, type the appropriate margins for your form. 8. Click Save Form, and then click Close to close the dialog box. To assign the custom form in your printer driver: 1. In the Printers window (in Windows XP, Printers and Faxes window), right-click the printer icon. On the displayed menu, click Properties. 3.
MP330.book Page 12 Tuesday, October 22, 2002 3:21 PM 6. In the Change Forms dialog box, in the Available Forms list, click the custom-sized form to want to assign. You can click the preferred unit of measure for reviewing the size of the selected form. 7. 3-12 Printing Click OK.
Printing MP330.book Page 13 Tuesday, October 22, 2002 3:21 PM The custom-sized form becomes available in your printer driver and can be selected in the Page Size and Output Size boxes on the Page Setup tab. Defining a Print Overlay 3 You can print your document with an image in the foreground or background. For example, you may want to print your company’s logo on letters. Once you select the image you want to use, you can set the placement, position, and size of the overlay.
MP330.book Page 14 Tuesday, October 22, 2002 3:21 PM 2. In the Overlay dialog box, do one of the following: • In the File Name list, click an existing overlay image. • To select a new overlay image file, click Browse. In the Select File dialog box, type or click the path and file name for the image that you want to use, and then click OK (in Windows XP, click Open). 3. Under Overlay Placement, click whether you want the image in the foreground or background of your printed document. 4.
MP330.book Page 15 Tuesday, October 22, 2002 3:21 PM When you type, rather than click, the actual values, the preview illustration of the overlay image does not automatically reflect the changes. 8. To save your overlay settings, click OK. To return the position and size settings to their original values, click Restore Defaults. To cancel your changed settings, click Cancel. 3 Quality print settings determine the following print results, as defined on the Quality tab.
MP330.book Page 16 Tuesday, October 22, 2002 3:21 PM ❏ Resolution Click the resolution, in dots per inch (dpi) for your printed document. Usually, the higher the resolution, the sharper the appearance of the document. However, print speed may be slower. ❏ Halftoning Click the desired halftoning method, that determines the dark and light shadings in your grayscale images: • Pattern 1 Click for standard halftoning. • Pattern 2 Click for halftoning that uses a different pattern than Pattern 1.
2. In the More Options dialog box, click Toner Saver. 3. To save your setting, click OK. Printing MP330.book Page 17 Tuesday, October 22, 2002 3:21 PM To return the setting to its default value, click Restore Defaults. To cancel your changed setting, click Cancel. Adding a Print Profile 3 After you define the settings on the Page Setup and Quality tabs, you can save the settings as a print profile for future use.
MP330.book Page 18 Tuesday, October 22, 2002 3:21 PM 2. In the Add Profile dialog box, enter a name for the new print profile in the Name box. 3. In the Icon box, click an icon to associate your new print profile. 4. In the Comment box, type an internal description of the print profile. 5. To review the print settings that will be saved as a print profile, click View Settings. 6. To save the profile, click OK. To cancel your settings, click Cancel.
MP330.book Page 19 Tuesday, October 22, 2002 3:21 PM Editing a Print Profile 3 After adding print profiles, you can edit a print profile to accomplish one of the following: ❏ Change information about a print profile (name, icon, or comments) ❏ Adjust the display order of the existing profiles ❏ Export a print profile to a file Printing ❏ Import a print profile from a file ❏ Delete a print profile. To edit a print profile: On the Page Setup or Quality tab, click Edit.
MP330.book Page 20 Tuesday, October 22, 2002 3:21 PM Changing Information About a Print Profile 3 For easier reference, you may want to assign a different name or icon to a print profile, or record additional comments about the intended use of the print profile. To change information about a print profile: 1. In the Edit Profile dialog box, in the Profile List box, click the print profile that you want to edit. 2. Enter your changes for the name, icon, and comments. 3. To save the profile, click OK.
MP330.book Page 21 Tuesday, October 22, 2002 3:21 PM Exporting a Print Profile 3 To keep the number of print profiles to a minimum, you can export a print profile as a file (with the file name extension .cfg). Once a print profile is exported, you can delete the print profile from the list. Anytime you need the print profile, you can import the file, to use the print profile again. Printing To export a print profile as a file: 1.
MP330.book Page 22 Tuesday, October 22, 2002 3:21 PM Importing a Print Profile 3 If you have a print profile that you exported to a file and then deleted, you can import the file to use the print profile again. To retrieve a print profile from a file: 1. In the Edit Profile dialog box, click Import. This is the Windows 98/Me dialog box screen. This is the Windows 2000/XP dialog box screen. 2. In the Open dialog box, type or click the path and file name for the print profile. 3.
MP330.book Page 23 Tuesday, October 22, 2002 3:21 PM Deleting a Print Profile 3 When you decide that you no longer need a print profile, you can delete it (for example, after exporting the print profile). To delete a print profile: 1. In the Edit Profile dialog box, in the Profile List box, click the print profile that you want to delete. Click Delete. Displaying Printer Driver Information 3 You can display information about your printer driver, such as the version and copyright.
MP330.book Page 24 Tuesday, October 22, 2002 3:21 PM 4. 3-24 Printing In the Properties dialog box (Windows 98/Me), Printing Preferences dialog box (Windows 2000), Properties dialog box or Printing Preferences dialog box (Windows XP), on the Page Setup and Quality tabs, specify your changes and click OK.
MP330.book Page 1 Tuesday, October 22, 2002 3:21 PM Chapter 4 4Frequently Asked Questions Contents of this chapter: Printer Cannot Be Initialized. ................................................................4-2 Installation Is Displaying Unexpected Behavior. ...............................4-2 Documents Are Not Printing Correctly. ..............................................4-4 Paper Is Not Loading Correctly. ...........................................................
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM Printer Cannot Be Initialized. ❏ 4 Is the operation panel blank? You might have a power problem. Check that the power cord is plugged securely into the printer, and that your electrical source is OK. You should have the printer connected directly to its own AC outlet and not connected to a power strip to which your computer is connected.
MP330.book Page 3 Tuesday, October 22, 2002 3:21 PM To remove the device: Click Start, point to Settings and then click Control Panel (in Windows XP, click Start, and then click Control Panel). In the Control Panel window, double-click System, click Hardware tab, and then click Device Manager (in Windows XP, click Performance and Maintenance, click System, and then on the Hardware tab, click Device Manager). Under Universal Serial Bus Controllers or Other Devices, click the device and press the Delete key.
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM 3. Disconnect your printer cable from the port. 4. Start the installation process again. For instructions, see Chapter 2, “Installing the Printer Driver.” Documents Are Not Printing Correctly. ❏ 4 Is the operation panel blank? You might have a power problem. Check that the power cord is plugged securely into the printer, and that your electrical source is OK. ❏ Is the printer warm to the touch? The printer might have overheated and shut down.
MP330.book Page 5 Tuesday, October 22, 2002 3:21 PM ❏ Is the document printing with undesirable results? You may experience undesirable results when printing a document if you have the Windows Printing System (or other bi-directional device, such as a later model laser printer) installed on your computer and you are attempting to use the same port on which you also have the printer connected. Be sure that the printer is the only device configured to a particular port.
MP330.book Page 6 Tuesday, October 22, 2002 3:21 PM ❏ Are you unable to print to a shared printer? If you are using a client system that is set up to use a shared printer, yet you are unable to print to the shared printer, check the following: ❏ That the server system, to which the printer is connected, is turned on ❏ That the server system has set the printer to be shared ❏ That the server system is set to allow your system access to the shared printer. Paper Is Not Loading Correctly.
MP330.book Page 7 Tuesday, October 22, 2002 3:21 PM ❏ Does some of the document content not fit on the page? Make sure paper is aligned correctly in the multi-purpose tray. Check that margins and paper size are set correctly in your printing application. Also, check that the scaling is set appropriately in the printer driver settings. The scaling may be set to enlarge the document page to a size that is too large for the paper. ❏ Is printing not clear? Check the print resolution.
MP330.
MP330.book Page 1 Tuesday, October 22, 2002 3:21 PM Appendix A ASharing Your Printer Cross-Platform in Windows 2000/XP If your system (server) is Windows 2000/XP sharing with Windows 98/ Me client systems, you may need to set up an alternate driver. During the setup, have the printer driver installation disk available. Appendix A 2. In the Printers window (in Windows XP, the Printers and Faxes window), click the printer icon. 3. On the File menu, click Sharing. 4.
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM • When prompted for an .
MP330.book Page 1 Tuesday, October 22, 2002 3:21 PM Appendix B BInstalling from a Local or Network Drive If the printer driver software has been placed on a local or network drive, you can install the software on your system from that drive, rather than using the printer driver installation disk. Installing the Software 4 You are ready to install the software once you have prepared your system, as described in the “Before You Begin the Installation: a Checklist” section in Chapter 2.
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM 4. Follow the on-screen instructions to complete the installation process. During installation, follow these guidelines: • Click Next to move from one dialog box to the next. • Make sure you click Next or OK on the current dialog box. • Be sure to wait for Windows to complete each setup step. If you hear the computer working, wait until it is done. 5. When prompted, connect your printer cable to the port on your computer. 6.
appendixB.fm Page 3 Monday, October 28, 2002 10:57 AM For Windows 2000/XP: See Step 7. 7. For Windows 2000/XP: When the Found New Hardware Wizard appears during the setup, and prompts you for additional information, conduct the following: For Windows 2000 • Search for a suitable driver for the printer. (Do not display a list of drivers.) • Specify a location. For Windows XP Select Install the software automatically (Recommended).
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM 8. When the setup is finished, if prompted, restart Windows. The installation program determines whether Windows needs to be restarted on your system. If you want to remove the printer driver software from your system, see the “Removing the Printer Driver” section in Chapter 2.
GGlossary A application Software prepared for a specific function or set of functions. Examples of an application program include word processing programs. Developers who make application programs include drivers that support different types of printers. automatic feed Method by which paper can be fed into the printer when the built-in multi-purpose tray is used. B brightness The relative proportion of light and dark areas. Decreasing brightness darkens the overall image.
MP330.book Page 2 Tuesday, October 22, 2002 3:21 PM F form A custom paper size, with width and height dimensions defined by the user. G graphic A written, printed, or electronically displayed symbol or drawing. Also, characters or text that have been generated by a computer graphics application program. grayscale A color in black and white as a result of different intensities of black.
Glossary MP330.book Page 3 Tuesday, October 22, 2002 3:21 PM N network A group of computers connected by cables or other means and using software that enables them to share equipment (such as printers) and exchange information. O orientation The print orientation in which a document is printed either across the narrower or wider dimension of a sheet of paper (portrait orientation or landscape orientation, respectively).
MP330.book Page 4 Tuesday, October 22, 2002 3:21 PM S scaling Enlarging or reducing the printed image. U USB Universal Serial Bus. A connectivity specification for attaching peripherals to computers. It eliminates the need to install cards into dedicated computer slots and reconfigure the system.
MP330.
MP330.
MP330.
MP330.
