FS40 FS400
Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder FS40 A/ FS400 A systems This device complies with Part 15 of the FCC Rules.
WARNING: To reduce the risk of electric shock, do not expose this product to dripping or splashing. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. CAUTION: • Danger of explosion if the wrong type of batteries are attached. Use only the same type of batteries. • Do not expose batteries or product to excessive heat such as the inside of a car under direct sunlight, fire, etc.
In these safety instructions the word "product" refers to the Canon Digital Video Camcorder FS40 A / FS400 A and all its accessories. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
21 Placing or Moving - Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 22 Power Sources - The CA-570 Compact Power Adapter should be 23 24 25 operated only from the type of power source indicated on the marking label.
30 Damage Requiring Service - Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally even if you follow the operating instructions.
Trademark Acknowledgements • SO, SDHC and SDXC Logos are trademarks of SD-3C, LLC. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • Manufactured under license from Dolby Laboratories. DOLBV "Dolby" and the double-D symbol are trademarks of Dolby DIGITAL Laboratories.
Package contents • CA-570 Compact Power Adapter [CD] • BP-808 Battery Pack [0] • STV-250N Stereo Video Cable (yellow, red, white plugs) [@] • IFC-300PCU/S USB Cable [(~)] • 3 Software CD-ROMs - PIXELA's VideoBrowser SO CD-ROM* - PIXELA's Transfer Utility SO CD-ROM* - ~ Instruction Manual/Music Data CD-ROM Contains the full-version Instruction Manual of the camcorder (PDF file). See the explanation on the next page. * The CD-ROM includes the instruction manual of the software (PDF file).
Table of Contents 08 Package Contents 10 Names of Parts and Icons 17 Charging the Battery Pack 21 Operating Modes of the Camcorder 25 Getting Ready to Start Recording 28 Basic Recording: Shooting Video and Taking Photos 35 Basic Playback: Playing Back Movies and Viewing Photos 38 Saving and Sharing Your Recordings 39 Playback on a TV Screen 41 Abridged Specifications About the Camcorder's PDF Instruction Manual This guide will get you started and show you how to use the most basic functi
ames of Parts and Icons CD left side view CD 0 ® Right side view CD@ ~~. ,=--_-_-_-_-_-_~!i~!i _-_-_-_-_-_-_-; ® @ Front view 10 RESET button (~ PDF> 106) button: Activate {AUTol mode to let the camcorder select the best settings for your subject. (OJ 21)1 WEB button: Convert your movies into MPEG files you can easily upload to the Web. C~POF) 86) Q) DISP. (on-screen display) button: Display a scene's timeline screen C~.P.JlF_) 62) and change the camcorder's onscreen displays. (~PPf_) 66)/BATI.
Names of Parts and Icons Top view LCD panel ® @ @ Zoom lever (1Il 29) C@ PHOTO button (OJ 28) @ POWER button ® Joystick (OJ 22) 1=J!!lI!~t"" @ LCD screen (OJ 27) @ FUNC. button: Press to access the FUNC. menu and setup menus. (When recording, the menus are accessible only in [-leU mode.) (Q)PDF) 28, 90) @ ~ III (play/pause) button (OJ 35)1 STARTISTOP button (CD 28) @) • (stop) button (OJ 35)/PLAYLIST button: Press to switch to the playlist.
Names of Parts and Icons Bottom view 12 @ Battery release latch @ Tripod socket: Mount the camcorder on a tripod for steadier shots. (~PDF) 114) ® Memory card slot (OJ 25) @ Battery compartment (~]l Battery compartment cover/Memory card slot cover (:30) Serial number The serial number label is located on the battery compartment cover.
· roduction nscreen Displays and Icons Recording movies (j}) "." tf0\ \!.9 .""m_.@ _TQ9 ~_~ ~@ l_@ CD Operating mode (QJ 21), Zoom m-O--D (QJ 29), Manual exposure 0-1-0 (~_PDF.,) 57) ® Recording program: Recording programs allow you to change various picture-related settings to your preference, or to use a Special Scene recording program to apply the camcorder settings most appropriate for a variety of situations.
Onscreen Displays and Icons @ Remaining battery time - CZI in red: Battery pack is almost empty. Replace with a fully charged battery pack.
Onscreen Displays and Icons Recording photos @ AF frame: (OJ 28) @ Self timer (~PDF) 61) ~) Number of available photos ©J In the built-in memory (ntD only) - Od in red: Cannot record any more photos. - ~ in red: No memory card in the camcorder. @ Camcorder shake warning: When this icon appears on-screen, you may need to stabilize the camcorder using a tripod. @ Focus and exposure lock (lIJ 28) (.
Onscreen Displays and Icons Playing movies (during playback) @ @ i @ @ Data code: In addition to the date and time of recording, you can choose to display information related to the camcorder settings like the shutter speed or aperture value used. (~PDF) 66) @ Eye-Fi wireless communication: Using an Eye-Fi card, you can upload your recordings wirelessly. Important restrictions apply so be sure to refer to Using an Eye-F!' card (~ PDF) 88).
.' tting started harging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. When you use the compact power adapter, the power of the battery pack will not be consumed. Charge the battery pack before use. Insert the battery pack. CD Open the battery compartment cover. (g)'lnsert softly into the compartment and press gently until it clicks. @ Close the battery compartment cover.
Charging the Battery Pack ON/OFF (CHG) (charge) indicator -----..--..... Connect the compact power adapter. CD Connect to the adapter. CD Plug into a power outlet. Connect the camcorder. Plug into the DC IN terminal. Charging will start when the camcorder is turned off. Lamp off (camcorder turned off) Red lamp flashes (charging) Lamp off (battery pack fully charged) .. :. ... D ..- : -.. , .
Charging the Battery Pack I Charging times Charging the supplied BP-808 Battery Pack will take approximately 2 hours 20 minutes. A fully charged battery pack will allow for the following operations (movies in XP mode): All given times are approximate and vary according to recording mode and charging, recording or playback conditions. See Charging, Recording and Playback Times o (~~J1E) 122) for details. IMPORTANT • Turn off the camcorder before disconnecting the compact power adapter.
Charging the Battery Pack • The battery pack will be charged only when the camcorder is off. • When the camcorder charges an exhausted battery pack for the first 20 minutes, it can be used for 3 times longer than it was charged. In other words, you can record with the camcorder for 60 minutes after a 20-minute charge. • If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.
,sic operation perating Modes of the Camcorder rmm button m!mJ Press to switch between the following modes: ~ WEB [AUTOI Mode o Take it easy and leave all the settings to the camcorder. PHOTO I-it] Mode Id Use ~ mode to access the menus and advanced functions and to change various settings up to your preferences. Start/Stop button In either mode, press [Start/Stop] to shoot movies or press IT>HOTO] to take photos. i See Advanced Funct/ons(~PDF) 51) for details.
Operating Modes of the Camcorder jOYsti~~~~~~:~tbt~~ktaUbse ~ the '> " . " " . -0, ... " '(. corresponding to the type of recoding you want to play back (movies or photos) and the memory where they were recorded (built-in memory or memory card; ImiJ only). The joystick serves also to navigate the menus and ""c, change settings. :v~. .~ o Q ~ .~ o Original movies Photos Built-in memory Memory card Original movies Photos Selecting what recordings to play back CD Select (lJ... .
i~t time settings ,/ / etting the Date/Time and Language When you turn on the camcorder for the first time, you will need to set the date and time before using the camcorder. You can also change the date format and time zone. (For your convenience, you can do so after changing the language to your preference.) See Changing the Time Zone (~PDF) 31) for details. o Press [POWER]. .When the internal clock is not set, the [DatelTime] screen will appear. Use the joystick to change the date/time.
Setting the DatelTime and Language Select the language used for menus and on-screen displays. You can select one of 27 languages to display the camcorder's menus and on-screen displays. Select the language of your preference using the fC':-@:J] menu. See Using the Menus (~ PDF) 27) for details. (FUNC.\.) [r§] Menu] .) ~ .) [Language @] ..) Desired language ~) [FUNC.] Ce$KY Melayu Pyt:U.ll~ D,mst:. Nederlands Y~palHcblCa Deutsch Norst Polski ii,;;J••H Fortugues n"::.
tting ready to start recording sing a Memory Card Use commercially available S;, SO memory cards, ~ SOHC (SO High Capacity) memory cards or ~,. SOXC (SO eXtended Capacity) memory cards to record movies and photos. While you can record photos on almost all types of memory cards, depending on the memory card, you may not be able to record movies. See Memory Cards Compatible for Use with the Camcorder (~ PDF) 32) for details. Before using an Eye-Fi card, be sure to refer to Using an EyeFi card (~ PDF) 88).
Using a Memory Card I Recording in the built-in memory or on the memory card (1m) only) You can select to record your movies and photos in the built-in memory or on the memory card. The built-in memory is the default memory for recording both, but you can select the recording memory independently for movies and for photos. See Selecting the Memory for the Recordings (~ PDF) 35) for details. Before using an Eye-Fi card, be sure to refer to Using an Eye-Fi card (~PDF) 88).
tting ready to start recording itting the Camcorder to You Adjust the grip belt and other accessories beforehand for a comfortable and secure grip while using the camcorder. Familiarize yourself with the different positions of the LCD panel to find the best angle for any recording situation. You can also turn on the LCD screen's backlight or adjust its brightness. See Preparing the Accessories C~ PDF} 22), Adjusting the Position and Brightness of the LCD screen (~ PDF) 23) and [LCD Brightness] (~P.Jl..f..
. sic recording hooting Video and Taking Photos In AUTO mode you can easily record movies and photos. You do not need to worry about any settings or menu options - the camcorder will select the most appropriate settings automatically. Set the camcorder to IAUTOl mode. CD Press [~c5~~BJ· (g) Press rJ!m). Start recording movies. Press to start recording. Press again to pause the recording and record the video on the memory as one scene. o . @mm!J PHOTO () CD,• .... -. I ~ :CD =-_ _ Q'AccEss ...
Shooting Video and Taking Photos I Use the zoom to frame the subject Use the zoom lever to zoom out and in. To zoom out, zoom toward the W (wide angle) end. To zoom in, zoom toward the T (telephoto) end. IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder.
Shooting Video and Taking Photos • About the zoom: The camcorder features three types of zoom (optical, advanced and digital) when recording movies. See [Zooming: Optical, Advancedand Digital ZoomJ(~PDF) 40) for details. • About the zoom speed: The zoom lever is set to a variable speed. That is, the zoom speed depends on how you press the lever: press gently for slower zooms; press harder for faster zooms. You can also change the zoom speed to one of three constant speeds.
Shooting Video and Taking Photos I When you have finished recording Confirm that the indicator goes out Make sure the camcorder has finished writing the scenes or photos on the memory before turning it off. CD • ACCESS CD Check that the indicator is off. o Press [fOWER). @ Close the LCD panel.
sic recording uick Start Function While recording, instead of leaving the camcorder in record pause mode, you can simply close the LCD panel to set the camcorder in standby mode. In standby mode the camcorder cons~mes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second*, allowing you to start recording right away.
Quick Start Function o IMPORTANT • Do not disconnect the power source during standby mode (while the ONI OFF (CHG) indicator is lit in orange). CD NOTES • If you close the LCD panel under some circumstances (for example while the memory card slot cover is open or when the battery charge is too low), the camcorder may not enter the standby mode. Check that the indicator changes to orange. • The camcorder will power off automatically if left in standby mode for 10 minutes.
sic recording electing the Quality of Video The camcorder offers 3 recording modes (or levels of video quality). Changing the recording mode will change the recording time available on the memory. Select XP mode for better movie quality or LP mode for longer recording times. See Selecting the Video Quality (Recording Mode) approximate recording times. (~epf.) 39) for You need to access the FUNC.
•r sic playback laying Back Movies and iewing Photos The basic playback screen is the index screen. Using the tabs at the top of the index screen you can select what recordings to playback (movies or photos) and what memory to play back (built-in memory or memory card, mI!J only). See Playing Back Video details. (~ PDF> 43), Viewing Photos (~ PDF) 74) for Press [."~[B 1to set the camcorder to playback mode. O r:I Select the tab of the recordings [:J you wish to play back. eD Select (..
Playing Back Movies and Viewing Photos Press @ to play back. Movies: The selected scene is played back. Playback continues until the end of the last scene recorded. Select (i..~) the •• »)) (volume) icon to adjust (..... ~ ) the volume as necessary. - Select (i..~) the II (pause) icon and press @ to pause the playback. Press again to resume. - Select (i..~) the. (stop) icon and press @ to stop the playback and return to the index screen. - Photos: The selected photo is displayed. - Move (.....
Playing Back Movies and Viewing Photos • You may not be able to play back with this camcorder movies recorded using another device. • When viewing photos, the following images may not be displayed correctly. - Images that were not recorded with this camcorder. - Images edited on or uploaded from a computer. - Images whose file names have been changed. CD NOTES • When playing back movies, depending on the recording conditions, you may notice brief stops in video or sound playback between scenes.
~ ernal connections aving and Sharing Your Recordings It is recommended that you periodically save your recordings on a computer. Movies: Use the supplied PIXELA's software to save and manage your movies. - Refer to the Installation Guide (supplied leaflet) and Software Guide (PDF file) of the supplied PIXELA's software for details about installing and using the software. - Using the camcorder, you can convert your movies into MPEG files you can easily upload to your favorite video sharing Web site.
sic playback layback on a lV Screen Connect your camcorder to a TV to enjoy your recordings with family and friends. o Turn off the camcorder and the TV. Connect the camcorder to the TV. Turn on the camcorder. Press ['''~[BJ to turn on the carllcorder directly in playback mode. Play back your movies or photos as described in the previous pages. ([) NOTES • The illustration is for reference only. The layout of terminals on your TV may be different.
Playback on a TV Screen • Adjust the volume using the TV. • When you play back 16:9 movies on standard TV sets with a 4:3 aspect ratio, the TV set will switch automatically to widescreen mode if it is compatible with the Video 10-1 system. Otherwise, change the aspect ratio of the TV manually. See (TV TypejC~PDFJ 94) for details.
ecifications bridged Specifications The specifications given here are an abridged version of the full specifications of the camcorder. Be sure to read the full version of the instruction manual for the complete information. See Specifications (~fD~) 124) for details. Recording media - IDI!J Built-in memory: 8 GB - SO, SOHC (SO High Capacity) or SOXC (SO eXtended Capacity) memory card (not included) Maximum recording time (approximate figures) - IDI!J 8 GB built-in memory: XP mode: 1 hr. 50 min.
Abridged Specifications I Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60°C (140 oF). Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. I Optional Accessories Canon offers a variety of optional accessories for your camcorder. See Optional Accessories (~PDF> 121) for details.
[USA I CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to Canon Consumer Digital Video Equipment (the "Equipment") purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT'S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
@ANADAI CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. ("Canon Canada") with respect to Canon Consumer Digital Video Equipment (the "EqUipment") purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
cauou CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd" Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway, Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA USA o o o ,.... .:. If you have any questions, call the Canon U.S.A ()\ Information Center toll-free at 1-800-828-4040 (USA only). o E CANADA CANON CANADA INC.
PUB.
Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
WARNING: To reduce the risk of electric shock, do not expose this product to dripping or splashing. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. CAUTION: • Danger of explosion if the wrong type of batteries are attached. Use only the same type of batteries. • Do not expose batteries or product to excessive heat such as the inside of a car under direct sunlight, fire, etc.
IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder FS40 A / FS400 A and all its accessories. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
21 22 23 24 25 26 27 28 29 Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
30 Damage Requiring Service — Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally even if you follow the operating instructions.
Trademark Acknowledgements • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Exciting Features Whether you are using a camcorder for the first time or are very experienced, this camcorder offers many easy-to-use functions. The following are just but a few examples of the many functions that can enrich your shooting experience. Pre-recording Dual Flash Memory You can record in the built-in memory or on commercially available memory cards ( 35). 54) When pre-recording is activated, the camcorder starts recording video continuously into a temporary 3-second memory.
Table of contents Introduction 8 12 14 14 16 Exciting Features About this Manual Getting to Know the Camcorder Supplied Accessories and CD-ROMs Names of Parts Preparations 19 19 22 23 25 25 27 27 30 30 31 31 32 32 34 35 35 Getting Started Charging the Battery Pack Preparing the Accessories Adjusting the Position and Brightness of the LCD Screen Basic Operation of the Camcorder Operating Modes Joystick and Joystick Guide Using the Menus First Time Settings Setting the Date and Time Changing the
Video 38 38 39 40 41 43 43 45 46 48 49 51 51 53 54 54 55 56 57 58 59 60 61 61 62 63 66 67 67 69 70 Basic Recording Shooting Video Selecting the Video Quality (Recording Mode) Zooming: Optical, Advanced and Digital Zoom Quick Start Function Basic Playback Playing Back Video Selecting what Recordings to Play Back Searching for Scenes Pre-selecting Recordings from the Index Screen Deleting Scenes Advanced Functions Automatic Exposure and Special Scene Recording Programs Automatic Backlight Correction A
Photos 73 74 76 76 78 Taking Photos Viewing Photos Slideshow Deleting Photos Copying Photos to a Memory Card External Connections 80 80 82 83 83 85 86 Terminals on the Camcorder Connection Diagrams Playback on a TV Screen Saving and Sharing Your Recordings Saving Recordings on a Computer Copying Movies to an External Video Recorder Preparing Movies for the Web Additional Information 90 90 92 98 Appendix: Menu Options Lists FUNC.
About this Manual Thank you for purchasing the Canon FS40 / FS400. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting ( 102). Conventions Used in this Manual • • • • • • • IMPORTANT: Precautions related to the camcorder’s operation. NOTES: Additional topics that complement the basic operating procedures. POINTS TO CHECK: Restrictions or requirements regarding the function described.
Brackets [ ] are used to refer to menu options as they are displayed on screen. The names of most buttons and switches are indicated within a “button” frame. For example FUNC. . The arrow is used to abbreviate menu selections. For a detailed explanation on how to use the menus, refer to Using the Menus ( 27). For a concise summary of all available menu options and settings, refer to the appendix Menu Options Lists ( 90).
Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder: XCA-570 Compact Power Adapter (incl.
The following CD-ROMs and software are supplied with the camcorder: • PIXELA’s Transfer Utility CD-ROM* - Use Transfer Utility for saving and transferring movies and music files you can use as background music. • PIXELA’s VideoBrowser CD-ROM* - In addition to all the functionality of Transfer Utility, you can use VideoBrowser for managing, editing, and playing back movies.
Names of Parts Left side view Right side view Front view 16 Introduction 1 RESET button ( 106) 2 button ( 25)/ WEB button ( 86) 3 DISP. (on-screen display) button ( 62, 66)/BATT.
Top view A d f A g A h A j A k A l A q S a S S s d S LCD panel f S Zoom lever ( 40) PHOTO button ( 73) POWER button Joystick ( 27) LCD screen ( 23) FUNC.
Bottom view 18 Introduction Battery release latch Tripod socket ( 114) Memory card slot ( 34) Battery compartment ( 19) Battery compartment cover/Memory card slot cover q Serial number D The serial number label is located on the battery compartment cover.
Preparations This chapter describes basic operations, such as navigating the menus, and first time settings to help you learn more about your camcorder. Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is completely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately.
3 Close the cover and slide it toward the lens until you hear a click. 3 4 Connect the power cord to the compact power adapter. 5 Plug the compact power adapter into a power outlet. 6 Connect the compact power adapter to the camcorder’s DC IN terminal. 7 Charging will start when the camcorder is turned off. • If the camcorder was on, the green ON/OFF (CHG) indicator will go out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging).
To remove the battery pack 1 Slide the battery compartment cover away from the lens and open it. 2 Press the battery release latch and pull out the battery pack. 3 Close the cover and slide it toward the lens until you hear a click. Battery release latch IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter. After pressing POWER to turn off the camcorder, important data is updated in the memory. Be sure to wait until the green ON/OFF (CHG) indicator goes out.
• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need. • USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. Preparing the Accessories Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Start/Stop button with your thumb.
To attach an optional wrist strap Pass the attaching end of the wrist strap through the rear bracket on the camcorder, thread the wrist strap through the loop and fasten. Adjusting the Position and Brightness of the LCD Screen Rotating the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens.
LCD Backlight When recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight to make it brighter. With the camcorder on, hold DISP. pressed down for more than 2 seconds. Repeat this action to switch the LCD backlight between off (normal) and on (bright). NOTES • The LCD backlight does not affect the brightness of the recordings. • Using the bright setting will shorten the effective usage time of the battery pack.
Basic Operation of the Camcorder Operating Modes Recording The camcorder offers two basic modes for recording video and photos: mode, for beginners or if you just prefer not to bother with detailed camcorder settings, and flexible recording ( ) mode, which lets you change the camcorder’s settings to your preference. Press the button to switch the camcorder to mode and press the button again to switch back to mode.
- menu: [Rec Media for Movies]*, [Rec Media for Photos]*, [Widescreen], [Video Snapshot Length]. menu: [Image Stabilizer]**, [Auto Slow Shutter]. , and menus: All settings. * ** The [ only. Standard] setting will be used in mode. mode if set to [ Off] in • Even in mode, the camcorder can help you with the settings. For example, you can use the Special Scene recording programs ( 51) to set at once all the optimal settings to match special recording conditions.
Joystick and Joystick Guide Use the joystick to operate the camcorder’s menus. Push the joystick up, down, left or right ( , ) to select an item or change settings. Press the joystick itself ( ) to save the settings or confirm an action. On menu screens, this is indicated by the icon . The functions that appear in the joystick guide depend on the operating mode. By default, the joystick guide is minimized. Push the joystick ( ) to display it.
Selecting an Option from the FUNC. Menu The following is an example of selecting a FUNC. menu option in mode. In playback modes, the operation varies depending on the function selected so refer to the relevant chapter as necessary. 1 Press FUNC. . 2 Select ( ) the icon of the function you want to change from the left side column. Menu items not available will appear grayed out. 3 Select ( ) the desired setting from the available options at the bottom bar. • The selected option will be highlighted in orange.
6 Press FUNC. . You can press FUNC. to close the menu at any time.
First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. When the [Date/Time] screen appears, the year will be selected. 1 Change ( ) the year and move ( ) to the month. 2 Change the rest of the fields (month, day, hour and minutes) in the same way. 3 Select ( ) [OK] and press setup screen.
Changing the Language The default language of the camcorder is English. You can set it to one of 26 other languages. Operating modes: FUNC. [ Menu] Desired language [Language ] FUNC. NOTES • The displays and that appear in some menu screens refer to the name of buttons on the camcorder and will not change, regardless of the language selected. Changing the Time Zone Change the time zone to match your location. The default setting is New York. Operating modes: To set the home time zone FUNC.
Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use commercially available Secure Digital (SD) cards with this camcorder. However, depending on the memory card, you may not be able to record movies. Refer to the table below. As of May 2010, the movie recording function has been tested using SD/SDHC memory cards made by Panasonic, Toshiba and SanDisk, and SDXC memory cards made by Panasonic and Toshiba.
SDXC Memory Cards As of May 2010, SDXC memory cards have been tested to work under Windows 7. For details on whether your computer's operating system is SDXC-compatible, check with your computer's manufacturer. IMPORTANT • If you use an SDXC memory card with a computer OS that is not SDXC-compatible, you may be prompted to format the memory card. In such case, cancel the operation to prevent data loss.
Inserting and Removing a Memory Card Make sure to initialize ( 35) all memory cards before using them with this camcorder. 1 Turn off the camcorder. Make sure the ON/OFF (CHG) 2 indicator is off. 2 Slide the memory card slot cover away from the lens and open it. 3 Insert the memory card straight, with the label facing away from the lens, all the way into the memory card slot until it clicks. 4 Close the cover and slide it toward the lens until you hear a click.
Selecting the Memory for the Recordings You can select to record your movies and photos in the built-in memory or on a memory card. The built-in memory is the default memory for recording both. Operating modes: POINTS TO CHECK • Be sure you understand the information provided in Eye-Fi cards ( 33) before using an Eye-Fi card. FUNC. [ Menu] [Rec Media for Movies] or [Rec Media for Photos] [Built-in Mem.] (built-in FUNC. memory) or [Mem.
FUNC. [ Menu] [Initialize / ] [Built-in Mem.] or [Mem. Card] Initialization FUNC. method [Yes]* [OK] FUNC. [ Menu] [Initialize ] Initialization method [Yes]* [OK] FUNC. * If you selected the [Complete Initialization] option, you can press to cancel the initialization while it is in progress. All recordings will be erased and the memory can be used without any problem. Options [Quick Initialization] Clears the file allocation table but does not physically erase the stored data.
• At the time of purchase, Eye-Fi cards contain the necessary network configuration software. Be sure to install the software and complete the required configuration setup before you initialize the Eye-Fi card prior to using it with this camcorder.
Video This chapter covers functions related to shooting movies, including recording, playback, advanced functions and playlist and scene operations. Basic Recording Shooting Video Operating modes: 1 Turn on the camcorder. By default, movies are recorded in the built-in memory. You can select the memory that will be used to record movies ( 35). 2 Press Start/Stop to begin recording. Press Start/Stop again to pause the recording.
• Be sure to save your recordings regularly ( 83), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. NOTES • About the Power Save mode: If [Power Saving Mode] is set to [ On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without any operation for 5 minutes. Press POWER to turn on the camcorder. • When recording in bright places, it may be difficult to use the LCD screen.
Approximate recording times Recording mode → Default value XP SP LP 55 min. 1 hr. 20 min. 2 hr. 35 min. Built-in memory/ 8 GB memory card 1 hr. 50 min. 2 hr. 45 min. 5 hr. 10 min. 16 GB memory card 3 hr. 40 min. 5 hr. 30 min. 10 hr. 25 min. 32 GB memory card 7 hr. 25 min. 11 hr. 20 hr. 50 min. Memory ↓ 4 GB memory card • When a recording exceeds 2 GB or 12 continuous hours, it will be divided and saved as scenes smaller than 2 GB.
Move the zoom lever toward W (wide angle) to zoom out. Move it toward T (telephoto) to zoom in. By default, the zoom lever operates at a variable speed – press gently for a slow zoom; press harder for faster zooms. NOTES • Keep at least 1 m (3.3 ft.) away from the subject. At full wide angle, you can focus on a subject as close as 1 cm (0.39 in.). W Zoom out T Zoom in • While the advanced zoom is activated, the field of view will be wider at full wide-angle.
2 When you wish to resume recording, open the LCD panel. The ON/OFF (CHG) indicator turns back green and the camcorder is ready to record. IMPORTANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange). NOTES • The camcorder will not enter standby mode if the LCD panel is closed while the ACCESS indicator is on or flashing, while a menu is being displayed, or while the PHOTO button is pressed down halfway.
Basic Playback Playing Back Video Operating modes: 1 Press to open the [Movies] index screen. 2 Move ( , ) the selection frame to the scene you want to play back. When you have recorded a large number of scenes, you can display ( ) a slidebar below the scene thumbnails and browse ( ) through index pages; then, return ( to select the desired scene. ) 3 Press to begin the playback. Playback will start from the scene selected and continue until the end of the last scene recorded.
IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. • You may not be able to play back with this camcorder movies recorded on a memory card using another device.
toward * to skip to the beginning of the current scene or to the next scene. to skip * Push twice to skip to the beginning of the previous scene. Ending special playback modes During any special playback mode, press . The camcorder will return to its initial mode (playback or playback pause). NOTES • During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture. • The speed indicated on the screen is approximate.
1 In the index screen, move ( ) the orange selection frame to the tabs on the top of the screen. 2 Select ( ) the tab corresponding to the recordings you want to play back. 3 Return ( ) to the index screen to select a scene or photo. To open the [Video Snapshot] index screen You can open an index screen that contains only your video snapshot scenes ( 55). In the original [Movies] index screen, press VIDEO SNAP .
2 Open the calendar screen. FUNC. [ Scene Search] [Calendar Screen] • The calendar screen appears. • Dates that contain scenes (that is, movies were recorded on that date) appear in white. Dates without recordings appear in black. 3 Move ( , ) the cursor to the desired date. • When you move the cursor to a date displayed in white, a thumbnail showing a still image from the first scene recorded on that date will be displayed next to the calendar.
3 Select ( ) the date, month or year and move ( recording dates. ) between 4 After selecting the desired date, press . The index screen will appear with the selection frame on the first scene recorded on the selected date. NOTES • You can press FUNC. to return to the index screen at any time. Pre-selecting Recordings from the Index Screen You can select in advance a number of original movies or photos from the index screen in order to perform certain actions on them collectively, all at once.
Total number of scenes selected Selected scenes 4 Press FUNC. twice to close the menu. To cancel all the selections FUNC. [ [OK] Select] [Remove All Selections] [Yes] FUNC. NOTES • The pre-selection of scenes/photos will be canceled if you turn off the camcorder or change the operating mode. • Scenes in the playlist cannot be included in the pre-selection. Deleting Scenes You can delete those scenes that you are not interested in keeping.
3 Delete the scenes. FUNC. [ Delete] Desired option [Yes]* [OK] FUNC. * If you selected any option other than [This Scene], you can press to interrupt the operation while it is in progress. Some scenes will be deleted nevertheless. Options [All Scenes] Deletes all the scenes. [All Scenes (this date)] Deletes all the scenes recorded on the same day as the selected scene. [This Scene] Deletes only the scene marked with the orange selection frame.
Advanced Functions Automatic Exposure and Special Scene Recording Programs The recording program determines how much control you have over the camcorder’s recording-related settings. Select the [ Programmed AE] recording program to give you full control over functions like the white balance or image effects. Alternatively, give the camcorder more control by selecting a Special Scene recording program.
[ Sports] To record sports scenes such as tennis or golf. [ Snow] To record in bright ski resorts without the subject being underexposed. [ Beach] To record on a sunny beach without the subject being underexposed. [ Sunset] To record sunsets in vibrant col- ors. [ Night Scene] To record nightscapes with lower noise. [ Low Light] To record in low-light situations. [ Spotlight] To record spotlit scenes. [ Fireworks] 52 Video To record fireworks.
NOTES • [ Portrait]/[ Sports]/[ Snow]/[ Beach]: The picture may not appear smooth during playback. • [ Portrait]: The blur effect of the background increases the more you zoom in (T). • [ Snow]/[ Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [ Low Light]: - Moving subjects may leave a trailing afterimage. - Picture quality may not be as good as in other modes. - White points may appear on the screen.
Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating modes: FUNC. [ Menu] Desired IS mode Options [Image Stabilizer] FUNC. ( Default value) [ Dynamic] Compensates for a higher degree of camcorder shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle.
Operating modes: 1 Open ( ) the joystick guide. 2 Select ( ) [ Pre REC] and press . • appears. • Press again to turn pre-recording off. Pre REC 3 Press Start/Stop . The scene recorded in the memory will start 3 seconds before Start/Stop was pressed. NOTES • While pre-recording is activated, the camcorder will not emit any notification sounds.
• The camcorder records for about 4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode. • You can change the length of video snapshot scenes to 2 or 8 seconds with the [Video Snapshot Length] setting. • When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released. • In index screens, video snapshot scenes are indicated with the mark.
Applying the Selected Digital Effect 1 Open ( ) the joystick guide. 2 Select ( )[ Digital Effects] and press . • The icon of the selected digital effect turns green. • Press again to deactivate the digital effect (its icon will turn white again). Digital Effects To fade in/out Activate the selected fader in record pause mode ( ), then press Start/Stop to start recording with a fade in. Activate the selected fader while recording ( ), then press Start/Stop to fade out and pause the recording.
POINTS TO CHECK • Select a recording program other than [ 1 Open ( ) the joystick guide. Fireworks]. Exposure 2 Select ( )[ Exposure] and press . • The current exposure is locked. • The exposure adjustment indicator and the neutral value “±0” appear on the screen. • The adjustment range and the length of the exposure adjustment indicator will vary depending on the initial brightness of the picture. • If you operate the zoom, the brightness of the image may change.
POINTS TO CHECK • Adjust the zoom before you start the procedure. 1 Open ( ) the joystick guide. 2 Select ( )[ Focus] and press The current focus is locked and [MF] appears. . Focus 3 Adjust ( ) the focus as required. • If you wish to focus on faraway subjects such as mountains or fireworks, push the joystick ( ) toward and hold it pressed down until [MF] changes to . 4 Push the joystick ( ) to hide the joystick guide. • The selected focus will be locked.
When the adjustment is completed, stops flashing and stays on. The camcorder retains the custom setting even if you turn off the camcorder. 2 Press FUNC. to save the setting and close the menu. Options ( Default value) [ Automatic] [ [ Daylight] To record outdoors on a bright day. Tungsten] To record under tungsten and tungsten-type The camcorder automatically sets the white balance for natural looking colors. (3-wavelength) fluorescent lighting.
FUNC. [ FUNC. Desired option ( Default value) Options [ [ [ [ Image Effect Off] Image Effect Off] Records with no image enhancing effects. Vivid] Emphasizes the contrast and color saturation. Neutral] Tones down the contrast and color saturation. Soft Skin Detail] Softens the details in the skin tone area for a more complimentary appearance. To obtain the best effect, use this setting when recording a person in close-up. Note that areas similar to the skin color may lack in detail.
For movies: Press Start/Stop . The camcorder starts recording after a 10-second countdown. The countdown appears on the screen. For photos: Press PHOTO , first halfway to activate the autofocus and then fully. The camcorder will record the photo after a 10-second countdown. The countdown appears on the screen. NOTES • Once the countdown has begun, any of the following actions will cancel the self timer. - Pressing Start/Stop (when recording movies) or PHOTO fully (when recording photos).
• Press DISP. again to return to the index screen. Current scene / Total number of scenes Scene length Recording date and time Interval between frames Timeline ruler Page slidebar Frame selected for start of playback 3 Select ( 4 Press ) the playback starting point from the timeline ruler. to begin the playback. To select another scene Move ( ) the orange selection frame to the large thumbnail and select ( ) another scene.
POINTS TO CHECK To play back scenes or a slideshow of photos recorded on the memory card, you will need to transfer the music tracks to the memory card in advance. Windows users: Use the supplied PIXELA’s software. For details, refer to the Software Guide (PDF file) of the supplied PIXELA’s software. Mac OS users: Use Finder to transfer music files from the [MUSIC] folder on the supplied Camcorder Supplemental Disc. Refer to About the music files ( 127) for the folder structure on the memory card.
IMPORTANT • If you use copyrighted songs and music tracks in your video creations, remember that music under copyright may not be used without permission from the copyright holder, except for cases permitted under applicable laws, such as for personal use. Make sure to follow applicable laws when using music files. NOTES • You can also add to the playlist just the video snapshot scenes you want to watch and arrange their playback order.
On-Screen Displays and Data Code You can turn most on-screen displays on or off. Operating modes: Repeatedly press DISP. to turn the on-screen displays on/off in the following sequence: , mode: • All displays on • Most displays off* mode: • All displays on • Data code only • All displays off * Pressing DISP. will turn off most of the icons and displays that appears automatically but will not remove onscreen displays that were turned on manually (for example, onscreen markers or the joystick guide).
Playlist and Scene Operations Editing the Playlist: Adding, Deleting and Moving Scenes Create a playlist to play back only the scenes you prefer and in the order of your choice. You can play back the scenes in the playlist using your favorite song as background music ( 63). Operating modes: Adding Scenes to the Playlist 1 Open the [Movies] or [Video Snapshot] index screen. You can select the original movies in the built-in memory or on the memory card.
NOTES • Deleting or moving scenes in the playlist will not affect the original recordings. • You can copy scenes from the built-in memory to the memory card ( 70) to include in the memory card’s playlist also scenes that were originally recorded in the built-in memory. Deleting Scenes from the Playlist Deleting scenes from the playlist will not affect your original recordings. 1 Open the [Playlist] or [Playlist: Video Snapshot] index screen.
2 Select ( , ) the scene you want to move. 3 Press FUNC. , select [ Move] and press . 4 Move ( , ) the orange marker to the desired position of the scene and press . The original position of the scene and the current position of the marker are displayed at the bottom of the screen. 5 Select ( ) [Yes] and press to move the scene. Dividing Scenes You can divide scenes (original scenes only) in order to leave out the best parts and later cut out the rest.
The video from the division point to the end of the scene will appear as a new scene in the index screen. NOTES • When advancing/reversing frames while dividing the scenes, the interval will be 0.5 second. • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene. • During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.
FUNC. * Press [ [OK] Copy ( )] Desired option [Yes]* FUNC. to interrupt the operation while it is in progress. Options [All Scenes] Copies all the scenes to the memory card. [All Scenes (this date)] Copies to the memory card all the scenes that were recorded on the same day as the selected scene. [This Scene] Copies to the memory card only the scene marked with the orange selection frame. [Selected Scenes] Copies to the memory card all the scenes selected in advance (marked with a checkmark).
NOTES • In the following cases, you will not be able to copy recordings to the memory card: - If the memory card slot is open. - If the LOCK switch on the memory card is set to prevent writing. - If there is no memory card in the memory card slot.
Photos Refer to this chapter for details on taking photos and playing them back. Taking Photos Operating modes: POINTS TO CHECK • Please read the IMPORTANT section before using an Eye-Fi card. 1 Turn on the camcorder. By default, photos are recorded in the built-in memory. You can select the memory that will be used to record photos ( 35). 2 Press PHOTO halfway. Once the focus is automatically adjusted, the onscreen icon will turn green and one or more AF frames will appear. 3 Press PHOTO fully.
- Photos recorded on an Eye-Fi card will be uploaded automatically after setting the camcorder to playback mode if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card ( 88). NOTES • Photos are recorded as JPG files. The photo size (1024x768) and quality cannot be changed. As a general guideline, you can use photos recorded with this camcorder to print photos up to L size (10 x 14.8 cm, 4 x 6 in.).
To return to the index screen from single photo view 1 Open ( ) the joystick guide. 2 Select ( ) the icon and press . You can also move the zoom lever toward W to return to the index screen. Photo Jump Function When you have recorded a large number of photos, you can jump 10 or 100 photos at a time. 1 In single photo view, open ( ) the joystick guide. 2 Select ( ) the 3 Select ( )[ 4 Jump ( icon and press Jump 10 photos] or [ . Jump 100 photos]. ) the number of photos selected and press .
Slideshow You can play a slideshow of all the photos and even set it to music. Operating modes: 1 Open the [Photos] index screen. 2 Select the background music to use when playing back the photo slideshow ( 63, steps 1-3). 3 Back in the index screen, select ( slideshow. , ) the first photo of the 4 Press / to begin the slideshow playback set to the selected music track. • You can adjust ( ) the volume during the slideshow playback. Hide ( ) the joystick guide if necessary. • Press to stop the slideshow.
2 Select ( ) the photo you want to delete and press 3 Select ( ) [Yes] and press . to delete the photo. 4 Repeat steps 2-3 to delete additional photos or press twice to close the menu. FUNC. Deleting Photos from the Index Screen 1 Open the [Photos] index screen. You can select the photos in the built-in memory or on the memory card. 2 Select ( , ) the photo you want to delete. This step is not necessary to delete all photos or previously selected photos. 3 Delete the photos. FUNC.
Copying Photos to a Memory Card You can copy photos only from the built-in memory to the memory card. POINTS TO CHECK • Please read the IMPORTANT section ( card. 79) before using an Eye-Fi Operating modes: Copying a Single Photo 1 Select to view the photos recorded in the built-in memory. In the index screen, select the tab under the icon and move the zoom lever toward T to return to single photo view. 2 Open the photo selection screen. FUNC. [ Copy ( [ Copy ( )] )] appears on the screen.
3 Copy the photos. FUNC. [ Copy ( FUNC. [OK] )] Desired option * If you selected an option other than [This Photo], you can press the operation while it is in progress. [Yes]* to interrupt Options [All Photos] Copies all the photos. [This Photo] Copies only the photo marked with the orange selection frame. [Selected Photos] Copies all the photos selected in advance (marked with a checkmark). Refer to Pre-selecting Recordings from the Index Screen ( 48).
External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. Terminals on the Camcorder 1 USB Terminal Access: Open the LCD panel. 2 AV OUT Terminal Access: Open the LCD panel. Sound from the built-in speaker will be muted while the STV-250N Stereo Video Cable is connected to the camcorder. Adjust the volume on the connected TV.
Connection 1 Composite Video Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals. Change the following settings on the camcorder: [TV Type] according to the TV set (widescreen or 4:3), if the TV cannot automatically detect and change the aspect ratio Yellow White STV-250N Stereo Video Cable (supplied) Connection 2 Red USB Type: Digital data connection Connect to a computer to save your recordings.
Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition connections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. 2 Connect the camcorder to the TV. Connection 1 ( 81). 3 Turn on the connected TV. On the TV, select as the video input the same terminal to which you connected the camcorder. Refer to the instruction manual of the connected TV.
Saving and Sharing Your Recordings Saving Recordings on a Computer Movies and photos recorded with this camcorder are saved in the built-in memory ( only) or on the memory card. Because space is limited, make sure to save your recordings on a computer on a regular basis. Installing the Supplied Software With the supplied software Transfer Utility you can save scenes to your computer.
mode: Transferring movies 3 Camcorder: When the connection is successfully established, [PC Connection] appears on the screen. 4 Computer: Depending on the software you chose to install, Transfer Utility SD or VideoBrowser SD will start up automatically. • Transfer Utility SD: Click [Video file import] to start transferring files. For details about using the software, click [Help] to open the Software Guide (PDF file). • VideoBrowser SD: Click in the menu panel to start transferring files.
• Operation may not work correctly depending on the software and the specifications/settings of your computer. • If you wish to use the image files on your computer, make copies of them first. Use the copied files, retaining the originals. • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the USB cable. - Do not turn off the camcorder or the computer.
2 Turn on the camcorder and set it to mode. 3 Camcorder: Locate the scene you wish to copy and pause the playback just before the desired scene. 4 Camcorder: Resume playback. • Push the joystick ( ) to hide the joystick guide. • By default, on-screen displays will be embedded in the output video signal. You can change the displays by repeatedly pressing DISP. ( 66). 5 External device: Start recording when the scene you wish to copy appears; stop recording when it ends. 6 Camcorder: Stop playback.
4 Play back the scene and pause the playback where you want the conversion to begin. 5 Press WEB . 6 Select ( ) [Yes] and press . • Press twice to interrupt the operation while it is in progress. • The video from the point where you pressed WEB until the end of the scene (or up to 10 minutes in case of longer scenes) will be copied as a Web-friendly MPEG file. 7 When the conversion is completed, a confirmation screen will appear.
• After you connect the camcorder to the computer, the supplied PIXELA’s software will copy the MPEG video files to the computer and upload them to the Web, leaving behind a copy of the video files in the memory card. Use the [Delete All Web Movies ] option to delete the MPEG files from the memory card after you confirm that the video files were correctly uploaded to the Web.
required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. • Do not use Eye-Fi cards on airplanes and in other places where wireless communication is forbidden. Remove the Eye-Fi card from the camcorder beforehand. NOTES • Depending on the amount of data to be transferred or wireless signal conditions, uploading may take a long time.
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus ( 27). For details about each function, see the reference page. Menu options without a reference page are explained after the tables. Menu options in boldface indicate default values. FUNC. Menu FUNC.
Mode : [Movies] index screen (original scenes) : [Playlist] and [Playlist: Video Snapshot] index screens : [Video Snapshot] index screen Menu item Setting options [Select Music] [Off], list of music tracks – z z 63 [Select] [Individual Scenes], [Remove All Selections] z – z 48 [All Scenes], [All Scenes (this date)], [This Scene], [Selected Scenes] z – z 70 [Playlist] – z – [Add to Playlist] [All Scenes (this date)], [This Scene], [Selected Scenes] z – z 67 [Divide] – z2 – –
Setup Menus Camera Setup 1 ( Mode) Menu item Setting options [Built-in Mem.], [Mem. Card] 35 [Rec Media for Movies] [Built-in Mem.], [Mem. Card] [Rec Media for Photos] [Widescreen] [ On], [ Off] – [Video Snapshot Length] [ 2 sec], [ [Self Timer] [ On [Onscreen Markers] [ [ Off], [ Level (White)], [ Level (Gray)], Grid (White)], [ Grid (Gray)] ], [ 4 sec], [ 8 sec] Off] – 61 – [Widescreen]: The camcorder uses the full width of the image sensor providing high-resolution 16:9 recordings.
Camera Setup 2 ( Mode) Menu item Setting options [Digital Zoom] [ On], [ Off] 40 [Zoom Speed] [ [ Variable], [ Speed 1] Speed 3], [ [Image Stabilizer] [ Dynamic], [ Standard], [ [Flicker Reduction] [ Off], [ 50 Hz], [ [Auto Slow Shutter] [ On], [ Off] [Wind Screen] [ Automatic], [ Speed 2], Off] 40 54 60 Hz] – – Off ] – [Flicker Reduction]: If the screen starts to flicker when recording movies under fluorescent lights, change the setting to reduce the effect.
[Data Code]: Displays the date and/or time when the scene was recorded. [ Camera Data]: Displays the aperture (f-stop) and shutter speed used when recording the scene.
System Setup 2 Menu item [Notification Sounds] Setting options [ [ High Volume], Low Volume], [ [ On], [ [Quick Start] [ [ Off], [ 10 min], 20 min], [ 30 min] [Initialize / ] ] z – Off] z z z – z – – – z z1 z 35 – z – 86 z z z – – – z – z z z 88 [Built-in Mem.], [Mem.
bers from 0101 to 9900, and stored in folders containing up to 100 photos. Folders are numbered from 101 to 998. [ Reset]: Photo numbers will restart from 101-0101 every time you insert a new memory card. [ Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. • If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card.
Menu item [Calendar Start Day] Setting options [Saturday], [Sunday], [Monday] – z – – [Date Format]: Select the date format to be used for most on-screen displays. [Calendar Start Day]: Select the day on which the week starts for the calendar screen ( 46).
Appendix: Onscreen Icons and Displays Recording Movies 1 Operating mode ( 2 3 4 5 6 7 8 9 q A a A 25), 40), Zoom ( Manual exposure ( 57) Recording program ( 51) White balance ( 59) Image effect ( 60) Digital effect ( 56) Recording mode ( 39) Manual focus ( 58) Automatic backlight correction ( 53) Pre-recording ( 54) Memory operation ( 101) Remaining battery time ( 101) 98 Additional Information s While recording/during playback: A d A A f g A h A j A k A l A Scene counter (hours : minutes : secon
Recording Photos S AF frame ( q 73) a Self timer ( S 61) s Number of available photos S ( S Camcorder shake warning ( d f Focus and exposure lock ( S 93) 73) On the memory card In the built-in memory only) Playing Movies (During Playback) S Data code ( g 66) h Eye-Fi wireless communication S ( j Scene number S 88) Additional Information 99
Viewing Photos k Protected photo mark (photos on S the memory card that were protected using another device) l Current photo / Total number of S photos 100 Additional Information D Photo number ( q 95) a Date and time of recording D
q Memory operation A Record, Record pause, Playback, Fast reverse playback, Slow playback, Playback pause, Fast playback, Slow reverse playback A Remaining battery time a • The icon shows a rough estimate 100% 75% 50% 25% 0% of the remaining charge as a percentage of the full charge of the battery pack. • When is displayed in red, replace the battery pack with a fully charged one. • When you attach an empty battery pack, the power may turn off without displaying .
Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
The battery pack is exhausted extremely quickly even at normal temperatures. - The battery may have reached the end of its battery life. Buy a new battery pack. Recording Pressing Start/Stop will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory is full or it already contains the maximum number of scenes (3,999 scenes).
- The memory is full. Delete some recordings ( to free some space. Cannot move scenes in the playlist. - The memory is full. Delete some recordings ( free some space. 49, 76) or initialize the memory ( 49, 76) or initialize the memory ( 35) 35) to Cannot delete a scene. - You may not be able to delete scenes recorded or edited using another device. Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual.
appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed. lights up in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings ( 49, 76) to free some space on the memory card.
Abnormal characters appear on the screen and the camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, remove the battery pack and disconnect all other power sources from the camcorder. Then, press the RESET button with a pointed object to reset all the camcorder’s settings to default values. Video noise appears on screen.
Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input.
Built-in memory is full - The built-in memory is full ([ End] appears on the screen). Delete some recordings ( 49, 76) to free some space or save your recordings ( 83) and initialize the built-in memory ( 35). Built-in memory writing error Attempt recovering the data? - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing in the built-in memory. Select [Recover] to try to recover the recordings.
Cannot play back Check the memory card - There is a problem with the memory card. Save your recordings ( 83) and initialize the memory card using the [Complete Initialization] option ( 35). If the problem persists, use a different memory card. Cannot play the movies in the built-in memory Initialize only using the camcorder - The camcorder’s built-in memory was initialized using a computer. Initialize the built-in memory with this camcorder ( 35).
- A memory card error occurred. The camcorder cannot record or display the image. Try removing and reinserting the memory card, or use a different memory card. - You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card ( 32). - If after the message disappears, appears in red, perform the following: Turn off the camcorder and remove and reinsert the memory card. If turns back to green you can resume recording/playback.
May not be possible to record movies on this memory card - You inserted a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 2, 4, 6 or 10. Mem. Card Number of scenes already at maximum - The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes ( 49) to free some space. Mem.
Not enough available space - The scene could not be divided because there was not enough available space in the memory. Delete some scenes ( 49). Number of scenes already at maximum - The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes ( 49) to free some space. Playlist is full. Cannot divide the scene. - Scenes cannot be divided when the playlist already contains 99 scenes. Delete some scenes from the playlist ( 68). Scene recorded using another device. Cannot divide the scene.
To use this function, switch out of mode - You pressed a button that cannot be used in to flexible recording mode. mode. Press to set the camcorder Too many photos. Disconnect the USB cable. - Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos (Windows) or 1,000 photos (Mac OS). Disconnect the USB cable, and restore the connection after a short while. - If a dialog box appeared on the computer screen, close it.
Do’s and Don’ts Handling Precautions Camcorder Be sure to observe the following precautions to ensure maximum performance. • Save your recordings periodically. Make sure to transfer your recordings to an external device such as a computer or digital video recorder ( 83) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel.
• When recording movies, try to get a calm, stable picture. Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness. If you experience such a reaction, immediately stop the playback and take a rest break as necessary.
played, depending on the battery life. Use the time shown on the screen as an approximation. Regarding the use of non-Canon battery packs • For your safety, battery packs that are not genuine Canon battery packs will not be charged even if you attach them to this camcorder or to the optional CG-800 Battery Charger. • We recommend using genuine Canon battery packs bearing the Intelligent System mark.
Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use the camcorder for about 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the camcorder off.
Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens • If the lens surface is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. • Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper. LCD Screen • Clean the LCD screen using a clean, soft lens-cleaning cloth.
When condensation is detected The camcorder automatically shuts off. The precise time required for water droplets to evaporate will vary depending on the location and weather conditions. As a general rule, wait for 2 hours before resuming use of the camcorder. Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz.
General Information Accessories (Availability differs from area to area) TV/HDTV VCR/DVD recorder Card reader/writer Computer Optional accessories not listed below are described in more detail in the following pages.
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Charging, Recording and Playback Times The charging times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. Charging conditions Charging time Using the camcorder 140 min.* Using the CG-800 Battery Charger 105 min. * When the camcorder charges an exhausted battery pack for the first 20 minutes, it can be used for 3 times longer than it was charged.
This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Specifications FS40 / FS400 — Values given are approximate figures.
• Lens Configuration: 10 elements in 8 groups (1 double-sided, aspheric element) • AF System TTL autofocus or Manual focus (for movies only) • Minimum Focusing Distance 1 m (3.3 ft.); 1 cm (0.39 in.) at full wide angle • White Balance Auto white balance, Custom white balance or Preset white balance settings: Daylight, Tungsten • Minimum Illumination 1.3 lx ([Low Light] recording program) 5.
BP-808 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System • Rated voltage: 7.4 V DC • Operating temperature: 0 – 40 °C (32 – 104 °F) • Battery capacity: 890 mAh (typical); 6.3 Wh / 850 mAh (minimum) • Dimensions: 30.7 x 23.3 x 40.2 mm (1.2 x 0.92 x 1.6 in.) • Weight: 46 g (1.6 oz) Weight and dimensions are approximate. Errors and omissions excepted. The information in this manual is verified as of December 2010. Subject to change without notice.
About the music files The specifications of the music files compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File extension: WAV The music data is saved in the memory under the following folder structure. In the built-in memory: CANON MY_MUSIC MUSIC_01.WAV to MUSIC_99.WAV On the memory card: CANON PRIVATE MY_MUSIC MUSIC_01.WAV to MUSIC_99.
Index A E Abroad, using the camcorder . . . 119 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . 94 AUTO mode . . . . . . . . . . . . . . . . . 25 Auto slow shutter . . . . . . . . . . . . . 93 Automatic backlight correction . . . 53 AV OUT terminal . . . . . . . . . . . 80, 81 Error messages . . . . . . . . . . . . . 107 Eye-Fi card . . . . . . . . . . . . . . . . . 88 B I Background music . . . . . . . . . . . . 63 Battery pack Battery infomation . . . . .
P P (recording program) . . . . . . . . . Photo numbers . . . . . . . . . . . . . . Playback Movies . . . . . . . . . . . . . . . . . Photos . . . . . . . . . . . . . . . . . Playing . . . . . . . . . . . . . . . . . . . . Portrait (recording program) . . . . . Power saving . . . . . . . . . . . . . . . Pre-recording . . . . . . . . . . . . . . . Pre-selecting recordings . . . . . . . 51 95 43 74 43 51 39 54 48 Q Quick Start . . . . . . . . . . . . . . . . . 41 R Recording Movies . . . . . . . . . . . .
USA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CANADA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
© 2011 CANON INC. PUB.
Windows users only: The supplied PIXELA's software offers many options for saving your movies to, and managing your video files on a computer. Two PIXELA CDROMs were supplied with your camcorder: Transfer Utility SD and VideoBrowser SD. Which software to install? VideoBrowser offers more advanced video editing options but requires a more powerful computer. On the other hand, Transfer Utility offers more basic options but can be used on a wider range of computer systems.
Your camcorder may not support all the options offered by the software. Save movies on the computer Upload movies to the Web Transfer music files (background music) to a memory card • • • • • • • • • Library: Organize your video files by date or event. Edit movies Create discs from your movies Convert movies to other formats, for example to take them with you on your portable media player * The icons on the left correspond to the buttons on VideoBrowser's menu panel.
11111111 1111111111111111 DIM 097 9 000 PUB. DIM-0979-000 PRINTED IN JAPAN 1210Ni6.0 • IMPRIME AU JAPaN © CANON INC.
~.! L0)7-::tJv~t:'7~1J)(?~J~~:J:/I~"T~1rI~, ~~M.o)CD-ROM1J\5 ~7 I''':r: 7~-'f/~ I'-JIILJ l:< rt ~\"o STOP! Be sure to install the,software from the enclosed CD-ROM before connecting the video camcorder to your computer with this cable. STOP! Veillez a installer Ie logiciel it partir du CD fourni avant de brancher Ie cable de connexion du camescope a I'ordinateur. iATENCION! Asegurese de haber instalado el software que contiene el CD-ROM antes de conectar la videocamera al ordenador con este cable.
« -z J: t) -oZ ~ w -aa..z: o N o N . t) -ZZ o z « t) @ ~ co LO I ~ o (0 ::> a..
canon FS40 FS400
-.-- ................ ,-., .........
Visit www.registercanon.com or call1-800-0K-Canon (1-800-652-2666) ENJOY THE BENEFITS OF REGISTERING • Exciting promotional offers on (anon products and accessories • (anon product news and information • Automatic notification of firmware and software updates • Protect your product NEED ACCESSORIES? For accessories and other supplies visit www.shop.usa.canon.com or an Authorized Canon Dealer.
Canadian Customers Only ~ Les Clients Canadiens Seulement Register Your Camcorder Now Enregistrez votre camescope maintenant .. Rendez-vous sur www.canon.ca/enregistrement ou composez Ie 1-800-0K-Canon (1-800-652-2666) Visit www.canon.
Canon Dealer Record of Canon Purchase , Fill in this information card at time of sale. D W I 002 1 000 Canon I I MODEL NO. I SERIAL NO. I FS400(BL) A KIT CANON LIMITED WARRANTY/GARANTIE L1MITEE THESE ARE NOT REGISTRATION CARDS - Retain for your records. II NE S'AGIT PAS DE CARTES D'EN~EGISTREMENT DE PRODUIT • Consenlez-Ies dans vos.dosslers. Conservez celte carte de garantie avec votre facture. La garantie s'applique dans Ie pays ou Ie produit a ete achele.
