U.M. 2

Battery Check
Check the mercury battery after loading it.
Especially when loading a new battery, be sure
to check the voltage .
1 Set the film speed scale at ASA lOO / DIN 21
and
the shutter speed di al at " X ". For
the film speed setting , lift up the outer ring of
the shutter speed dial and turn . See page 16.
• An accurate check cannot be made if set·
tings other than those ment ioned above are
used.
Sufficient Power
Meter Needle _O. ______ t .. ____ _
t
Insufficient Power
( Must be replaced )
Turn the battery check lever on the outer
side of the film rewind crank to "C" index .
If the meter needle inside the viewfinder
2
3
swings up to or over the " 0" index, the
battery has sufficient power. If the needle stays
below the edge of the "0" index, voltage is
insufficient and the battery must be replaced.
• Life of the battery in normal use is appro xi·
mately one year .
• The battery releases current only when the
meter circuit switch is pressed.
9