U.M. 3

4
When the back cover is half-closed, the
QL cover presses down on the film . Check
through the sprocket window whether the film
has been engaged correctly onto the gear.
26
5
Close the back cover.
Press down to prevent the cover from rising,
then turn the back cover lock clockwise to close.
Fold
down the rewinding crank .
•
If the film is sagging , the cartridge will rise
and the back cover will not close.
6
Make three blank shots.
Leave the lens cap on and advance the film
three times, each time releasing the shutter.
The film counter will advance from the "S"
mark to "0 ". With one more advance, the
camera will be ready for the first shot .
Setting the Film Speed
When loading the film, be sure to set the film
speed in the window of the shutter speed dial.
Refer to page 16 for settin g the fi Im speed.
Checking Correct Film Loading
The film is properly loaded and transported if
the rewind knob rotates when the film advance
lever is wound . If the rewind knob does not
rotate , it means the film was not loaded pro-
perly . If such is · the case, take out the film,
as illustrated on the followin g page, and reload
the film .
27