Scanner - Digital Scanner User Manual

CANON Digital Galvano Scanner System
KP-1SM Series + GC-251
Users Manual 1.00
16
2.7.1 RS-232C command input
RS-232C command input allows the following:
• Operation setting
• Parameter setting
• Error processing
• Status check
(For details, see 7, “Commands.”)
If position data send by high-speed serial communication is disabled, RS-232C command input is
enough for the following:
• Step movement
• Raster scan (Continuous oscillation of a certain angle at a fixed frequency)
(Communication specifications)
Wiring Cross wiring
Communication rate 38400 bps
Data length 8 bits
Stop bit 1
Parity None
Data format ASCII code
Delimiter code LF (0x0a) or CR (0x0d)