GP-E2 INSTRUCTION MANUAL

When the receiver is attached or connected to a camera that displays the

[

GPS device settings

] menu item, images are geotagged as you shoot.

On cameras other than the EOS 7D

and EOS REBEL T5/EOS 1200D,

simply shoot with the receiver

attached to your camera. Images can

also be tagged with the shooting

direction.

EOS 7D or EOS REBEL T5/EOS 1200D Users

Plug the end of the cable labeled

WFT GPS

> into the receiver’s

<C> terminal. Plug the other

end of the terminal, labeled

CAMERA

>, into the camera’s

<C> terminal.

Do not plug the end of the cable

labeled <

WFT GPS

> into the

camera’s <C> terminal,

which may damage it.

Images cannot be tagged with the

shooting direction.

Geotagging Images as You Shoot

WFT GPS

CAMERA

Geotagging Information

Direction

Latitude

Longitude

Elevation

UTC

For movies, the GPS information acquired when movie shooting starts is

recorded (except with the EOS 7D or EOS REBEL T5/EOS 1200D).

Note that signal reception conditions are not recorded.

When using the receiver at the same time as an external or built-in flash,

attach the receiver to the Accessory Bracket AB-E1 (sold separately, p.28).

COPY