Projector User Manual

Setting an IP Address (SX80)
122
4 Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
[IP address]: IP address of projector
[Subnet mask]: Subnet mask of projector
[Default gateway]: Default gateway of network
5 Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
[To:]: E-mail address to which error notification message is sent.
(Within 63 alphanumeric characters)
[Cc:]: Second E-mail address to which error notification mes-
sage is sent (Within 63 alphanumeric characters, can be
omitted).
[From:]: Sender of E-mail (projector)
[SMTP server IP address]: IP address of available SMTP server
[SNTP server IP address]: IP address of available SNTP server (can be omitted)
[Time zone]: Time zone of installation site
[Mail resend interval]: E-mail resend interval if the transmission has failed
Setting range: 0 – 59 seconds (factory default: 10 sec-
onds)
[Mail resend times]: Number of resend times if the E-mail transmission has
failed
Setting range: 0 – 255 times (factory default: 3 times)
[Error report]: ON/OFF of error message sending function. Select [ON].
[OFF] is the factory default.