importantUsage instructions WARNING! TO REDUCETHE RISKOF FiREOR ELECTRICSHOCK,O0 NOTEXPOSETHiS PRODUCT TO RAiN ORMOISTURE, WARNING! TO REDUCETHE RiSKOF ELECTRICSHOOKANDTO REDUCEANNOYING iNTERFERENCE, USETHERECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright oweers and be contrary to copyright laws. HD Camcorder, VIXIA HF $10 A / VIXBAHF $100 A systems This device complies with Part 15 of the FCC Rules.
CAUTION: ®Danger ofexplosUee ifthe wrong type ofbattery pack isattached. Use orfly thesame type ofbattery pack, ®De notexpose battery pack to excessive heat such as the iesUdeof a car under direct sunlight, fur& etc, mmportant Warning CAUT_ON: TO REDUCE THE RiSK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSJDEo REFER SERVICmNG [TO QUAL F ED SERV CE PERSONNEL.
In these safety instructions the word "product" refers to the CanonHDCamcorder VIXIAHF$10 A / VIXlAHF $100 A and all its accessories. 1 Read these instructions. 2 Keepthese instructions. 3 4 Heed all warnings. Follow all instructions. 5 Do not usethis apparatus near water. 6 Cleanonly with dry cloth. 7 Do not install near any heat sourcessuch as radiators, heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.
21 Placing orMoving --Do not place onanunstable cad, stand, tripod, bracket ortable. The product may fall, causing serious injury toachild or adult, and serious damage tothe product. Aproduct and cart combination should bemoved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination tooverturn.
30Damage Requiring Service --Disconnect this product from the wal! outlet and allpower sources including battery, and refer servicing toqualified service personnel under the following conditions: a.When the power-supply cord orplug isdamaged. b. Ifany liquid has been spilled onto, orobjects have fallen into, the product. c. Ifthe product has been exposed torain orwater. d. Ifthe product does not operate normally even ifyou follow the operating instructions.
Online product registration for U.S.A. Customers Register your product online at _istercanon.com only. ,/Protect your product We will keep the model number and date of purchase of your new Canon product on file to help you refer to this information in the event of an insurance claim such as loss or theft. v_Receive information on new products and promotions Upon your request, we will send you information on Canon new products and promotions.
Enjoying High-DefinitionVideowith your Camcerder Preserve your most treasured memories, be it unforgettable scenery or cherished moments spent with family and friends, with high-definition video recordings of a quality second only to actually being there.
What are the advantages of flash memory? Your videos and photos are recorded in the built-in memory' (_ only) or on commercially available SDiSDHC memory cards 2 using AVCHD specifications 3. Recording on flash memory means that there are no moving parts in the recorder unit of the camcorder, To you, it means a camcorder that is smaller, lighter and faster, in fact, using the Quick Start function ([ZJ 48) you can open the LCD panel and start recording within approximately one second.
Can Jplay back my high-definiti0n video on other devices? Needless to say, you can connect your camcorder to an HDTV to enjoy your recordings with family and friends (l_J 124), You aBso have the foJJowing options: You can easily play back video recorded on the memory card by inserting the memory card directly into AVCHD-compatibie TV sets and HDD or DVD recorders that feature an SD/SDHC memory card slot 4. For details, video recorder.
Tableef centents m mntroduction 8 16 18 18 20 23 Enjoying High-Definition About this Manual Video with your Camcorder Getting to Know the Camcorder Supplied Accessories and CD-ROMs Names of Parts Screen Displays m Preparations 12_ 27 27 29 3! Getting Started Charging the Battery Pack Preparing the Wireless Controller and Accessories Adjusting the Position and Brightness of the LCD Screen 33 33 35 35 Basic Operation of the Camcorder Operating Modes Joystick and Joystick Guide Using the Menus 38 38
m Video 44 44 45 47 48 Basic Recording Shooting Video Selecting the Video Quality (Recording Zooming Quick Start Function 49 49 51 52 54 57 58 Basic Playback Playing Back the Video Selecting what Recordings to Play Back Searching for Scenes Selecting the Playback Starting Point Pre-selecting Recordings from the Index Screen Deleting Scenes 60 Advanced 60 62 64 Mode) Functions 7! 72 74 Special Scene Recording Programs Changing the Shutter Speed and Aperture Cinema Mode: Giving a Cinematic Look to y
86 86 87 91 Playiist and Scene Operations Dividing Scenes Editing the Playiist: Adding, Deleting, Moving and Playing Back _ Copying Scenes m Photos 93 93 94 95 Basic Recording Taking Photos Selecting Photo Size and Quality Deleting a Photo Right After Recording 96 96 97 99 Basic Playback Viewing Photos Deleting Photos Magnifying Photos during Playback 100 100 Additional Flash 102 Functions 104 104 Drive Mode: Continuous Shooting and Exposure Bracketing Taking Photos while Recording Movies (Simult
m E×temaUConnections 120 ! 2! ! 24 Terminals on the Camcorder Connection Diagrams Playback on a TV Screen 125 ! 25 !26 Saving Your Recordings Saving Your Recordings on a Computer Authoring High-Definition (AVCHD) Discs and Photo DVDs ! 30 Copying your Recordings to an External Video Recorder !3! ! 35 Transferring Photos to a Computer Transfer Orders (Direct Transfer) m AdditionaU mnformation 137 137 140 Appendix: Menu FUNC.
About this Manuam Thank you for purchasing the Canon VIXIA HF $10/VIXIA HF $100. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (Et_ 152). CenventionsUsedin this r_anual * @ iMPORTANT: Precautions related to the camcorder's operation. * (_ NOTES: Additional topics that complement the basic operating procedures.
Advanced Fmlctions SpecialScerleRecording Programs Recordinginavery brightski resortor capturingthe full colorsof a sunsetor a fireworksdisplaybecomesaseasyas selectingaSpecial Scenerecordingprogram,Fordet_i]sabouttheavailableoptions,refer to page62. 34) Brackets [ ] are used to menu options to refer +_ as they are , displayed on screen. _+l _(_ r_(_) ©,[P __ I Press I I] _ pow_it],o to display the Special Scene SON U¢ ......
Supplied Accessories and CD°ROMs The following accessories are supplied with the camcorder: pact PowerAdapter (_eo_ power cord/ BP-807 Battery Pack,_ _WL-D88 Wireless Controller (ind, CR2025 lithium button battery) i 18 * i i b'odtct_,_ STV-250NStereoVideo Cable,_4 Yellow _ Red _ White plugs "_
Thefollowing CD-ROMs andsoftware aresupplied withthecamcorder: HXELA Application _Disc1CD-ROM* and'PIXELA ImageMixer 3SE' Installation Guide - ImageMixer 3SETransfer Utility - Software forsaving andtransferring movies. - Music Transfer Utility - Software fortransferring tothecamcorder music dataforvideo snapshot playback. HXELA Application _Disc2CD-ROM* - ImageMixer 3SEVideo Tools - Software formanaging, editing, and playing back movies.
Names of Parts Left side view _ Stereo microphone (L) (C[_ 80) Speaker (_ 49) _} VIDEO SNAP (video snapshot) button (q:365)/ N (print!shard} button (EZ3 112, 134) {4} DISE (on-screen display) button (L'-_ 54, 78)/ BAT-]-.
Back view DC IN terminal (1_ 27) Camera mode dial ([Z] 33) @ @ @ @ AV OUT terminal ([Z] 120, 122)/ (} (headphones) terminal (l_ 81) _} START/STOP button (iZ3 44) ___Battery attachment unit (_ 27) ® RESET button (IZ] 155) _:_ Remote sensor (_ 29) @ LCD screen ([Z[] 31) (2_Joystick (E]Z} 35) ® FUNO.
@ Seria_ number The serial number label is located on @ the top surface of the battery attachment unit. Remove the battery pack to find it. @ Tripod socket (_ 167) WirelessControllerWL=D88 START/STOP button (L_ 44) (2_ FUNC= button (_ 36, 137) @ MENU button ([._ 36, 140) @ PEAYLIST button (EZ3 87) (5_ Navigation @ "qll buttons ( A/_'/_/I_ (frame reverse) button ) ([_ 50) 441 (fast reverse) button (E_ 50) {8} _ (play) button ([Z3 49) @ || (pause) button [] _ ([.
@@@ @®@®@@® (0 Operating Recording _ mode (83 33) program (83:[:3 60, 62, 64) _3}White balance ([L_ 74) _4_Dmage effect (83[376) 24F progressive (83 26, 64) Digital effect (Q3 77) _6}Recording mode (C:[3 45) @ Face detection _¢}Photo quality/size (simultaneous recording) ([::]3 103) _8_Remote sensor off (83[:3148) (_ AGC (automatic gain) limit (83 _ Microphone attenuator 1_ Pre_recording (83 26) {_ _.
® @ _0bZoom (_ Exposure 47), e_|_o @ ®® _ Oamcorder (_ 70) shake warning @ Light metering mode ([£.Q 104) _ Focus and exposure _2}Drive mode (C[] 102) _ Flash (C_ 100) 62 Photo quality/size (_ lock (_ 94) @ Self timer (CCI 69) _ Number of available photos @ On the memory card _.
ViewingPhotos ®@ @ Histogram @ Manual focus (_ (CC] 105) 71) @ Current photo / Total number of photos d_ File size @9Photo number (_ _1_Photo size ([_ 94) (5_Aperture value (12_ 62) @ Protected 149) photo mark ([_ @ Date and time of recording 107) _0_Manual exposure _3_Shutter speed ([_ (L_ 70) 62) todct * 25
@ Memory operation 0 Record. 0 || Record pause. I_, Playback, || Playback,pause, _ Fastreverse playback, I_ Slow playbacK. 41 I1_ Frame advance. _ll Frame reverse Fast playbacK, S!ow reverse playbacK, @ Remaining battery time o The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the battery pack. The remaining recording/playback time d the battery pack is displayed, unminutes, next to the icon.
Preparations This chapter describes basic operations, such as navigating the menus, and first time settings to help you learn more about your camcorder. Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. For approximate charging times and recording/playback times with a fully charged battery pack, refer to the tables on pages 176-177.
If the indicator flashes quickly, refer to Troubleshooting (CZ3152). To remove the battery pack 1 Slide in the direction of the arrow and hold it pressed down. 2 Slide the battery pack down and then pull it out. ® BATTERY RELEASE switch @ _'_fPOR-IXNT Turn off the camcorder before connecting or disconnecting the compact power adapter. After pressing _ to turn off the camcorder, important data is updated in the memory. Be sure to wait until the green ON/OFF (CHG) indicator goes out.
We recommend that you prepare batter,/packs to last 2 to 3 times longer than you think you might need. USAand Canada enly: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this batter,/. Preparing the Wireless Controller and Accessories First, insert the supplied CR2025 lithium button battery into the wire= less controller. 1 Press the tab in the direction of the arrow and pull out the battery holder.
If the wireless controller does not work, check that _[_/ © [Wirebss Remote Control] is not set to [_ Off _l_] (C_3148). Otherwise, replace the batter,/. Accessories Fasten the grip be_t. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the _} button with your thumb. To attach a shoulder strap Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap.
Adjusting the Position and Brightness of the LCD Screen Rotating the LCD Pand Open the LCD panel 90 degrees, You can rotate the panel 90 degrees downward. You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases: - To include yourself in the picture when recording with the self timer. - To allow the camcorder to be operated with the wireless controller from the front.
Repeat this action to turn the LCD backlight on (bright) or off (normal). If [__ O [LCD Screen Dimmer] is set to [_ On] (83 147), pressing for more than 2 seconds will turn off the screen dimmer and return the LCD screen to its previous brightness setting. The LCD backlight does not affect the brightness of the recordings. Using the bright setting will shorten the effective usage time of the batten/pack.
Basic Operation of the Camcorder Operating Modes Recording When recording video or photos, the camcorder's operating mode is determined by the position of the camera mode dial, Duam Shot Recordvideoandtake photoseasily,lettingthe camcordertakecareof all the ::settings- Greatfor beginnersor if youjust prefernotto botherwith detaibdcamcorder settings:................................... _,_ Easyrecordingd moviesand photos(C;3 44, 93).
In mode menus cannot be accessed, but the following settings can be changed in advance, before setting the camera mode dial to - Recording mode of movies Size/qua/ty of photos _ Your selection of recording media for movies/photos Auto slow shutter - Image stabilizer - Back/ght correction - All settings under the setup menu's [-fv3,[_ and _1 tabs. Even in one of the flexible recording modes ( or ), the camcorder can help you with the settings.
Joystick and Joystick Guide Use the joystick to operate the camcorder's Push the ioystick up, down, left or right (AV, 4_ ) to select an item or change settings_ menus, Press the }oystiek itself (0) to save the settings or confirm an action. On menuscreens, thisisindicated bythe icon!_ If the joystick guide does not appear on the screen, press O or push the joystick (A_', 4_ ) to display it. The functions that appear depend on the operating mode.
Sdecting an Option from the FUNC. Menu Following is an example of selecting a FUNC. menu option in mode (the operation is similar in mode). In playback modes, the operation varies depending on the function selected so refer to the relevant chapter as necessary. 1 Press [_. 2 SeBect (AV) the icon of the function you want to change side coBumn. from the bft @. Menu items not available will appear grayed out. 3 SeBect (_] the desired bottom bar.
Move (AT) the orange selection bar to the tabs at the top of the screen to select a different menu (step 3). 5 Sebct (AV) the desired option and press @ to save the setting. Some options, like brightness and volume settings, need to be adjusted by pushing the joystick (4I_). 6 Press _. You can press [Fu_] to close the menu at any time. A small font size is used in menu screens so you can see all options and current settings in one screen.
First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder's clock is not set. When the [Date/Time] screen appears, the year will be selected. 1 Change (a,_') the year and move (_) to the month. 2 Change the rest of the fieBds (month, day, hour and minutes) in the same way. 3 SeBect (1_) [OK] and press O setup screen.
Changing the Language The default language of the camcorder is English. You can set it to one of 22 other languages. {F-O-N-e:] @ [_h Menu] © _] © [Language (_,_}]© Desired language O [¢uRc. The displays and 0@ that appear in some menu screens refer to the name of buttons on the camcorder and will not change, regardless of the language selected. Changing the Time Zone Change the time zone to match your location. The default setting is New York.
Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use commercially available _ SDHC (SD high capacity) memory cards and .._ SD memory cards with this camcorder. However, depending on its Speed Class, you mat' not be able to record movies on the memory card. Refer to the table below. As of December 2008, the movie recording function has been tested using SD/SDHC memory cards made by Panasonic, Toshiba and SanDisk. We recommend using memory cards with a Speed Class 4 or higher.
Insed:ing and Removing a Memory Card Make sure to initialize all memory cards before using them with this camcorder (C3 42). 1 Turn off the camcorder, Make sure the ON/OFF (CHG) indicator is off. 2 Open the memory card sBot cover, 3 Insert the memory card straight, with the _abe_facing up, aH the way into the memory card sBot untiB it cBicks, 4 CBose the memory card s_ot cover, Do not force the cover closed if the memor inserted.
Selecting theMemory fortheRecordings You can select to record your movies and photos in the builtqn memory or on a memory card. The builtqn memory is the default memory for recording both.
_F@q-d:]© [_ Menu] © [_ © [Initialze _]] © Initialization method © [Yes]* O [OK] © [_UNd:] * Press _ to cancel the complete initia/zation whle it is in progress, All recordings will be erased and the memory can be used without any problem. @ IIdIPORYAIT Initia/zing the memory wil permanently erase al recordings, Lost original recordings cannot be recovered. Make sure you save important recordings in advance using an external device (I::13125).
Video This chapter covers functions related to shooting movies, including recording, playback, advanced functions and playiist and scene operations. Basic Recording Shooting Video 1 Set the camera mode dial to _w or 2 Turn on the camcordero By default, movies are recorded in the built-in memory. You can set the memory card as the recording media for movies ([1;342), 3 Press [:SYA_TOP] to begin recording. Press ISTART/STOP' again to pause the recording. You can also press on the LCD panel.
- Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. Be sure to save your recordings regularly (el3 125), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.
×P+iiiiiiii!iiii!iii3!iiiiliiiiiiiiiiii!!iSP_! ii_ 32GB Builtoin memory 2h_ 55 rain. 4nr. 10 ram, 5hr, 45 n[n, 4 G8 20 rain. 30 ram. 40 rain. 40 rain. - hr. Memory card 16GB Memory card 32 GB Memory card 12hr. 15 mir _ hr. I hr. 10 rain. 30 rain. " nr, 2 hr, 3 hr. 25 mm. 20 rain. Memory card 8 GB 9hr, 35 rnin, - nr, 2hr. 2hr, 25 rain. 5 ram, 50 rain. 4hr, 45 rain, 6hr. 5 rain 2 hr, 4 hr. 5 hr. 9 hr. 12hr. 55 rain, 10 mm. 45 ram. 35 rnin, 15 rain.
Zooming ! (IZ[333) mode: In addition to the optical zoom, digital zoom is also avail= able (EZ] 142). 10x 0pticai Zoom angle) to zoom out. Move it toward T Move the zoom (telephoto) to zoom lever in. toward W (wide [f By default, the zoom lever operates at a variable speed - press gently for a slow zoom; press harder for faster zooms. Keep at least 1 m (3.3 ft.) away from the subject. At full wide angle, you can focus on a subject as close as 1 cm (0.39 in.).
Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second*, allowing you to record the subject right away. * The actual time requiredvariesdepending on the shooting conditions.
Basic Playback Playing Back the Video i:i:ii,i!ii _¸:¸_¸_¸¸¸ _d ii¸¸¸¸¸¸ ,i_iii!!!!iii .....! ii i_iii_i!i!iii!_!_!,iii ii_ %_ 1 Set the camera mode diaB to %mor 2 Press "E_-_l-_q Even if the camcorder is off, pressing Lm._%_ will turn on the camcorder in playback mode. The index screen appears after a few seconds. 3 Move (AT', _111_)the selection frame to the scene you want to play back.
- Donotopen thememory cardslotcover. - Donotdisconnect thepower source orturnoffthecamcorder. - Donotchange thecamcorder's operating mode. You maynotbeable toplay back withthiscamcorder movies recorded onamemory card using another device. Depending ontherecording conditions, youmaynotice brief stops in video orsound playback between scenes. Special playback modes Toenter thespecial playback modes, usethewireless controller ([:Z] 22)orthejoystick guide (8335).There isnosound during thespecialplayback modes.
Skipping scenes Camcerder: Open (_)thejoystick guide O Select (AV)thebottom rowO Push the joystick (4_)toward _ *toskiptothe beginning ofthecurrent scene orl_ toskiptothenextscene. Wireless centreller: Press <_1" toskiptothebeginning ofthecurrent scene or_ toskiptothenextscene. • Push thejoysticWpress thebutton twice toskip tothebeginning oftheprevious scene, Ending special playback modes During anyspecial playback mode, press _ onthecamcorder or onthewireless controller.
1 in the index screen, move (AT) the orange seBection frame to the tabs on the top of the screen. 2 SeBect (4_) pBay back. the tab corresponding to the recordings you want to 3 Return (AT) to the index screen to seBect a scene or photo. By default, the index screen will show up to 6 items (scenes or photos). Move the zoom lever toward W to show up to 15 items per screen. Move it toward 1"to return to the default index screen display.
When youmove thecursor toadatedisplayed inwhite, athumbnail showing astillimage fromthefirstscene recorded onthatdate will bedisplayed next tothecalendar. Below itwillappear thenumber of scenes recorded (_) andthetotalrecording timeforthesame day. You canselect (AV)theyear ormonth field andchange (_) the year ormonth tomove faster between calendar months. 4 Press O toreturn totheindex screen. Theorange selection frame willappear onthefirstscene recorded on theselected date.
Sdecting 0nly Scenes that Contain PeopWs Faces If you recorded movies with the Face Detection function (C[3 72) activated, the camcorder can narrow down the scenes shown in the index screen, leaving only those scenes where a face was detected. 1 Open the movie index screen. You can select the original movies in the built-in memory or on the memory card (q3 51). 2 Narrow down the scenes displayed in the index screen.
MovieTimeline 1 Open the original movies index screen. You can select the original movies in the built-in memory or on the memory card (L_ 51). 2 Select (_.T, 4_) the scene you want to view and press _. The [Timeline] screen appears. The large thumbnail will show the first frame of the scene. Below it, the timeline ruler shows frames taken from the scene at fixed intervals. Press [Sl_P:_again to return to the index screen. ....
Changes intheScene's Main Subject 1 Open the[Scenes withFaces] index screen. Refer toSelecting Only" Scenes that ContaLr} People's Faces (q3 54). _ You can select the original movies in the built-in memory or on the memory card (r_ 51). 2 SeBect (AV, _II_) the scene you want to view and press _. The [Timeline by Faces] screen appears. The large thumbnail shows the point at which a face was first detected.
Pre-selecting Recordings fromthemndex Screen Youcanselect inadvance anumber oforiginal movies orphotos from theindex screen inorder toperform certain actions onthem collectively, allatonce. mode: Delete ([Z_ 58),copy* ([Y_ 91)oraddtheselected scenes totheplayiist (EZ] 87). mode: Delete (L]398),copy* (EZ_ 109) orprotect ([_108) the selected photos ormark allofthemwithprintorders (rzZ] 117) ortransferorders (L_135). *_ only. 1 Open themovie orphoto index screen.
To cancel all the selections O [[_ Select] O [Remove All Selections] L_u_c: O [Yes] O [OK] O The pre-selection of scenes/photos will be canceled if you turn off the camcorder or change the operating mode. Scenes in the playlist cannot be included in the pre-selection. Deleting Scenes You can delete those scenes that you are not interested in keeping. Deleting scenes allows you also to free up space on the memory. Options [A_ Scenes] Deletes all the scenes.
3 Delete thescene(s). _-F__I} O [_ Delete] O Desired option (i})[Yes]* O [OK]O * ifyou selected any option other than [This Scene], you can press O tointerrupt theoperation while itisinprogress, Some scenes willbedeleted neverthe less, 0 I[_IPOR'fAIIT Be careful when deleting original recordings.
Advanced Functions Special Scene Recording Programs Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. For details about the available options, refer to page 61. 0 [P Programmed AE] 0 [_'lbPortrait] 0 Press _ to display the Special Scene (SCN) recording programs 0 Desired recording program 0 [.) Night]: - Moving subjects may leave a trailing afterimage.
Options [_ (_ Default value) Pe_rait] ÷ The camcorder uses a large aperture, to achieve a sharp focus on the subject while blurring the background. To record sports scenes such as tennis or golL [ _ Night] To record in low-light situations. [_¢ $_÷+PJ] To record in bright ski resorts without the subject being underexposed. [_ Beach] To record on a sunny beach without the subject being underexposed. [--J_$+anset] colors. To record sunsets in vibrant To record spotlit scenes.
Changing theShutter Speed and Aperture Select the [ P Programmed AE] recording program to use functions like the white balance or image effects. Select one of the other automatic exposure recording programs to control the shutter speed or aperture. Options (* Default value) [P Pregrammed AE] _ The camcorder automatically adjusts the aperture and shutter speed to obtain the optimal exposure for the subject, [Tv ShuAeropHe_ity AE] Set the shutter speed value.
Shutter speed guidelines Note thatonscreen only thedenominator isdisplayed - [Tv250]indicates ashutter speed of1/250 second, etc. [1/21% [1/41% [l/SL[l/15]_ [1]30]Torecord inlow-light situations. [1/¢e] [l/lee] To record under most ordinary conditions. To record indoor sports scenes. [1/25e], [1_0e]_ [1/leee] _ To record from within a moving car or train or to shoot fast-moving subjects such as roller coasters. [1/aeee]** * To record outdoor sports scenes on sunny days. mode only. ** mode only.
Cinema Mode: Giving aCinematic Look toyourRecordings Give yourrecordings acinematic lookbyusing _ ..... the CineM ode] recording program. Combine_,._...o_ this[l_ recording program withthe 24fpsprogressive _,_, frame rate[_ PF24] togettheenhanced effect ofthe24pCinema Mode.
Using anExternal Video Light Youcanusetheoptional VL-5 Video Light orVFL=2 Video Flash Light when youneed avideo lightthatisstronger thanthebuiltqn minivideo light. Attach theoptionaB videoBight totheminiadvanced shoe, Refer toUsing the MLni Advanced Shoe (CT383). .._" appears when you turn on the optional video light (ON or AUTO). For details about using the optional video light, refer to the instruction manual of the accesser!/used.
CombiningVideoSnapshotSceneswith Music 1 Open the original movies index screen and press _/. The button's blue light will turn on and only video snapshot scenes will appear in the index screen. _ You can select the original movies in the built-in memory or on the memory card (_ 51). To play back the video snapshot scenes in the playlist, press 2 Open the Hat of background rFUN0.! O [jl music tracks. Select Music] 3 SeBect (_V) a music track and press _ twice.
@ _dfpoR_HT Music filestransferred tothecamcorder withthesupplied software Music Transfer Utilities maynotbeused without permission fromthe copyright holder, except forcases permitted under applicable laws, such asforpersonal use.Make sure tofollow applicable laws when using music files. You canalso addtotheplaylist (Cl3 87)justthevideo snapshot scenes youwant towatch andarrange theirplayback order. When thememory isinitialized, music files willbeerased aswell.
Pre-recording Function The camcorder will start recording 3 seconds before you press S_RT/STOy, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. 1 Open (A) the joystick guide, Pte REC 2 SeBect (AV) [q_ Pre REO] and press O° @ appears. Press O again to turn pre-recording off. 3 Press [START/STOP/. The scene recorded in the memory will start 3 seconds before _'sTS_} was pressed.
SelfTimer _i ¸¸_iiiiii!!ii!i_i_!!!iTJi i i}!!:!!!!!!!!_i!i_! ii!i _,i,i,_iii_ii_,i!!!i_i i _ %_ FU[LUN_.} © [_ Menu] © [i_l or _q © [Self Timer] © [On @] © @ appears, mode: mnrecord pause mode, press i_£Ri%i:_#}. The camcorder starts recording after a 1O-second countdown*. countdown appears on the screen. The mode: Press [PHOTO}, first haBfway to activate the autofocus and then fully. The camcorder will record the photo after a 10-second countdown*. countdown appears on the screen.
Manual ExposureAdjustment and AutomatBcBackHghtCorrection At times, backlit subjects may appear too dark (underexposed) or subects under very strong lights may appear too bright or glaring (overexposed). To correct this, you can manually adjust the exposure or use the automatic backiight correction. _ P0_HTSTOCHECK Select a recording program other than [._[4. Fireworks]. ManualExposureAdjustment 1 Open (A) the joystick 2 Select (AV) [[] guide. Exposure] and press @.
AutomaticBacHightCorrection When shooting subjects with a strong light source behind them, you can have the camcorder automatically correct for the backiight. 1 Open (,&) the joystick guide. BLO 2 Select (AV) [;_& BLC] and press _. _2+appears. Press _ again to turn off the back_ght correction. Manual Focus Adjustment Autofocus may not work well on the following subjects. focus manually.
4 Adjust (4_,)thefocusasrequired, thenhide(y)thejoystick. Theselected focus willbelocked. During focus lock,press O twice toreturn thecamcorder to autofocus. This function canalso beassigned tothecustom key/dial (C_85). Infinity Focus Usethisfunction when youwishtofocus onfaraway subjects suchas mountains orfireworks. Instep4intheprevious procedure: Push thejoystick (i_)toward _ andhoBd itpressed downuntiB "MF" changes to00.
3 If there is more than one person in the picture, main subject. Move the white detection frame to the person for whom you want to optimize the camcorder's settings. Main subiect setect (4t_) the ..... The camcorder may mistakenly detect the faces of non-human subjects. In such case, turn face detection off. In certain cases, faces may not be detected correctly. Typical examples include: - Faces that appear at the edges of the picture.
White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions so that white objects will always look truly white in your recordings. j _ PONTSTOCHECK Select a recording program other than the Special Scene recording programs. Options (_ Default value) [AW[} Autematie] ÷ The camcorder automatically sets the white balance for natural looking colors. [_1_Daylight] [_ Shade] [& C_eedy] [;_ To record outdoors on a bright day.
To set the custom white balance 1 Point the camcorder at a white object, zoom in until it fills the whole screen and press _ET). When the adjustment is completed, _ stops flashing and stays on. The camcorder retains the custom setting even if you turn off the camcorder. 2 Press _ to save the setting and close the menu. When you select the custom white balance: - Set the custom white balance in a sufficiently illuminated place. - Turn off the digital zoom (IZI3142).
Image Effects Youcanusetheimage effects tochange thecolor saturation andcontrasttorecord movies andphotos withspecial coloreffects, _ PO _tTS TO CHECK +Select arecording program other than theSpecial Scene recording programs. Options(+Default value) [_F Image E_e_ _f]+ [_v Vivid] [_'N Neutral] [_s Records with no image enhancing effects. Emphasizes the contrast and color saturation. Tones down the contrast and color saturation. Lew Sharpening] Records subjects with softened outlines.
Digital Effects ¸¸iiiiiiiiiii!!!!! ¸iii Opt[el'Is [_ (_ Default J value) Digita_ Effect 0f_] _ Select this setting when you do not intend to use the digital effects. [l_J Fade T_igger], [_ Wipe] Select one of the faders to begin or end a scene with a fade from or to a black screen. [_ B_ack & White]* white. [_ Sepia]* Records movies and photos in sepia tones for an "old" look. [_1_] A_] Records movies and photos in black and Select this effect to add "flavor" to your recordings.
To activate an effect mode: Activate the selected effect while recording or in record pause mode. mode: Activate the selected effect and then press record the photo. to When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally, The camcorder retains the last setting used even if you deactivate the selected digital effect or change the recording program.
* Pressing [13iSP.I will turn off most of the icons and displays that appear automati-cally but will not remove onscreen displays that were turned on manually (for example, onscreen markers, the audio level meter or the joystick guide). **Only displayed in record pause mode, not while recording.
While the digital tele-converter is activated, photos cannot be recorded simultaneously at [LW3264x1840] size. Audio Recording Level You can adjust the audio recording level of the builtqn or an external microphone. You can display the audio level indicator while recording. ManualAdjustmentof the AudioRecordingLevel 1 Open (A) the joystick guide. M_c.Level 2 SeBect (AV) [_ Mic.
When theaudio level meter reaches theredpoint (0dBmark), the sound maybedistorted. Iftheaudio level istoohigh andthesound getsdistorted, activate the microphone attenuator ([:_3 143). Werecommend using headphones (LTj 81)tocheck thesound level while adjusting theaudio recording level orwhen themicrophone attenuator isactivated. This function canalso beassigned tothecustom key/dial (CZ] 85).In thatcase, theaudio level adjustment barappears inwhite.
Toadjust the volume of the headphones In mode, adjust (_) the volume of the headphones O [Headphone Volume] setting (CO 146). In mode, and in mode during slideshow playback, adjust the headphones volume the same way you adjust the speaker's volume (CO 49). @ with the _IPORTANT When using headphones, make sure to lower the volume to an appropriate level. Do not connect the headphones to the AV OUT/f) terminal if the O icon does not appear on the screen.
_,_ ............ _÷_.i s _i_,_._ ,_ Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to System Diagram (83 174) and OptionalAccessories (CO 175). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used.
Using an External Microphone When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder's internal machinery. In such case, we recommend using an external microphone. Usingthe DM-IO0 Directi0nalStereoMicrophone iii! ! il ,!!ii!!!!!i i_i ¸ iiiiiiiiiii_i,iii ¸¸i _ %_ Attach the optional DM-1 O0 DirectionaB Stereo Microphone mini advanced shoe. to the Refer to Using the Mini Advanced Shoe (_ 83). •.5" appears.
Using theCustom KeyandDial You can assign to the [CUSTOM button and dial one of five frequently used functions. You can then adjust the selected function using the [CUSTOM!button and dial, without having to access any menus. Options (_ Default value) [Expe_ute] Manual exposure adjustment (C_/70). Press cus_i to turn the manual exposure on/off and turn the dial to compensate the exposure. [Fecus] _ Manual focus (C]3 71). Press _ to turn the manual focus on/off and turn the dial to adjust the focus.
PmayHst and Scene Operations Dividing Scenes You can divide scenes (original scenes only) in order to leave out the best parts and later cut out the rest. 1 Open the originaB movies index screen. You can select the original movies in the built-in memory or on the memory card (CZ351). 2 SeBect (AV, _) the scene you want to divide, 3 Press [¢urqd.i, seBect [_ Divide] and press O, The scene selected will start playing back. Pause the playback at the point where you want to divide the scene.
- Scenes thatwere notrecorded withthiscamcorder. Scenes cannot bedivided within 0.5seconds from thebeginning orthe endofthescene. During theplayback ofascene thatwasdivided, youmaynotice some anomalies inthepicture/sound atthepoint where thescene wascut. Editing thePlaylist: Adding, Deleting, Moving andPlaying Back Create aplaylist toplaybackonly thescenes youprefer andinthe order ofyourchoice.
Press _ST] onthecamcorder oronthewireless controller to switch between theoriginal movies index screen andtheplaylist, Playfist Deleting ormoving scenes intheplaylist willnotaffect theoriginal recordings, _ You cancopy scenes fromthebuilt-in memory tothememory card(8391)toinclude inthememory card's playlist also scenes that were originally recorded inthebuilt-in memory, You maynotbeabletoaddtotheplaylist scenes thatwere recorded or edited using another device orscenes thatwere edited using thesoftware onth
Deleting Scenes from the Playlist Deleting scenes from the piayiist will not affect your original recordings. Options [Am_Seene$] Deletes all the scenes from the playlist. Fhis Sere] Deletes from the playlist only the scene marked with the orange selection frame. 1 Open the playlist index screen. Open the original movies index screen and press iPLAYLIST).
4 Move (&T,411_) theorange marker tothedesired position ofthe scene and press 0" The original position of the scene and the current position of the marker are displayed at the bottom of the screen. 5 SeBect (_) [Yes] and press 0 to move the scene. You may not be able to move scenes in the playlist if there is not enough space available in the memory. Haying Back Scenes in the Piayiist with Music You can play back the scenes in the playiist set to background 1 Open the playHst index screen. music.
Copying Scenes You cancopy original movies ortheentire playlist only from thebuilt-in memory tothecorresponding location onthememory card. ....! Copying Original Movies Options (A_ Seethes( Copies all the scenes to the memory card. (Am_Seethes (this date}] Copies to the memory card all the scenes that were recorded on the same day as the selected scene. Fhis $c_e] Copies to the memory card only the scene marked with the orange selection frame.
Copying the Entire Haylist 1 Open the index screen of the builtdn memory"s playlist. In the original movies index screen, select the [_} tab under the _m, icon (CO 51), and press _ST}. You can press [V_D_OSNAP] to open the playlist for video snapshot scenes (_ 65). 2 Copythe playlist° rFUNC.}O [i Copy (@*_d)] O [Yes]* O [OK] O !FONO.] * Press _) to interruptthe operation while it is in progress. @ NPOB]XNT . Observe flashing.
Refer tothischapter fordetails onshooting photos - taking photos andplaying themback, capturing photos fromvideo andprinting photos. Basic Recording Taking Photos ! 1 Set the camera mode diaB to Oor 2 Turn on the camcordero By default, photos are recorded in the built-in memory. You can set the memory card as the recording media for photos (83 42). 3 Press haffwayo Once the focus is automatically adiusted, _ will turn green and one or more AF frames will appear. 4 Press _ fully.
If the subject is not suitable for autofocus, (_ turns yellow, Adjust the focus manually (q3 71), When the subject is too bright, [Overexp.] will flash on the screen. In such case, use the optional 58 mm ND4L filter, Selecting Photo Size and Quality Photos are recorded as JPG files. As a general rule, select a larger photo size for higher quality. Select the [L_ 3264x1840] size for photos with an aspect ratio of 16:9.
O [_L 3264x2456] O Desired photo size* O Desired photo quality* 0 [_0iq_} * Press (SET) to move back and forth betweensizeand quality selection.The number displayedon the rightcorner indicatesthe approximatenumber of photos that can be recorded with the current quality/sizesetting. The actual number of photos that can be recorded will vary depending on the subject and shooting conditions. The camcorder retains the last setting used even if you set the camcorder to mode.
Basic Pmayback Viewing Photos To start directly in single photo view 1 Set the camera mode dial to _. 2 Press bS_F¢l The last photo recorded will be displayed in single photo view. 3 Push the joystick between photos. (4_)to move Push the joystick (4_) and hold it down to run quickly through the photos. To get to single photo view from the index screen Pressing _m,_%_ when recording with the camera mode dial set to _ or ,_ will open the movie index screen. 1 Open the photo index screen (1:_!51).
You canalso move thezoom lever toward Wtoopen thephoto index screen, Photo Jump Function When youhave recorded alarge number ofphotos, youcanjump10or 1O0photos atatime. 1 Open (A)thejoystick guide, 2 Select (AV)the_ iconandpress O" 3 Select (A_')[_ Jump 10photos] or[:1_00 Jump 100photos]. 4 Jump (4_)thenumber ofphotos sebcted andpress O. @ _dIp0[¢'_XHT Observe thefollowing precautions while theACCESS indicator isonor flashing. Failing todosomayresult inpermanent dataloss.
Using the FUNC. Menu 1 In single photo view, open the photo seBection screen. [¢uNc} O [_ Delete] [ Delete] appears on the screen. 2 SeBect (_) 3 SeBect (_} the photo you want to deBete and press O" [Yes] and press O to deBete the photo, 4 Repeat steps 2_3 to deBete additionaB photos or press _] to cBose the menu, twice DeletingPhotosfrom the index Screen Options [Am_Phetes] Deletes all the photos. Fhis Phete] Deletes only the photo marked with the orange selection frame.
Magnifying Photos during Playback In single photo view, photos can be magnified up to 5 times. _ appear for photos that cannot be enlarged. will 1 Move the zoom _ever toward T. The photo is magnified by 2 times and a frame appears indicating the position of the magnified area. To further enlarge the photo, move the zoom lever toward T, To reduce the magnification times, move it toward W, 2 Move (A_', 4_) the frame to the part of the photo you want to see enBarged.
Additional Functions Flash You can use the flash to take photos in dark places, (_ 33) Options (* Defaultvalue) _A(auto}, The flash fires automatically of the subject. according to the brightness @ (ted-eye reductieo, acre} The flash fires automatically according to the brightness of the subject. The assist lamp lights up to reduce the red-eye effect. {flash on} The flash always fires. @ (flash off} The flash does not fire. 1 Open (_) the joystick 2 Select (&V) guide.
Refer toUsing the Mini Advanced Shoe (8}3 83). ,,_°_ appears when you turn on the video flash light (O ON). For details about using the video flash light, refer to the instruction manual of the VFL-2. (_ NOTES • The flash will not fire in the following cases: - When you manually adjust the exposure in _A(auto) or @ (red-eye reduction) mode. - During auto exposure bracketing. - In the [_÷ Fireworks] recording program. - When using an optional video light.
Drive Mode: ContinuousShooting and ExposureBracketing Take a series of 3hotos of a moving subject or record the same picture in 3 levels of exposure in order to choose later the photo you like the best. _ ?0_HTSTOCHECK Select a recording program other than [q_.Fireworks]. Options (_ Default [[3$ing_e] [_ ÷ value) Records a single photo. Centinueus Sheeting], [ L_ Hi-Speed Ce_tinueu$ Sheeting] Captures a series of up to 60 photos as long as you hold {_6_6[ pressed down.
Taking Photos while Recording Movies (Simultaneous Recording) You can record photos even while the camcorder is set to mode. Moreover, you can capture the photo at the same time you are recording video. Photos recorded with simultaneous recording will have the same aspect ratio of movies (16:9).
Light Metering Mode The camcorder measures the light reflected from the subject in order to calculate the optimal exposure settings. Depending on the subject, you may want to change the way the light is measured and evaluated. j Options [m (* Default value) Eva_eative]* Appropriate for standard shooting conditions, including backlit scenes, The camcorder divides the picture into several areas and the light is measured in all of them to achieve the optimal exposure for the subject.
5 Press _ topBay back thesBideshow settothebackground music sebcted. Press Ira] tostoptheslideshow andreturn tothephoto index screen, During theplayback oftheslideshow, push thejoystick (_) to adiust thevolume ofthebackground music. _ Atthetimeofpurchase, music filesarestored inthebuilt-in memory. Transfer themusic files tothesame memory thatcontains the photos youwant toplay back asaslideshow.
The area to the right of the histogram represents highlights and the left side represents shadows. A photo whose histogram skews to the right is reintively bright; while one whose histogram peaks to the left, is relatively dark. o -6 _. Shadows_,..> Highlights Capturing Photos from the Playback Scene You can capture a single photo or a series of photos from a previously recorded scene. The size of the captured photo(s) will be [MW 1920x1080] and it cannot be changed, but you can select the photo quality.
Photos captured from a scene with a lot of fast movement may be blurred. _ Photos will be recorded on the memory selected for recording photos (C_342). [D_ Photo Sequence]: - Up to 100 photos can be captured at a time. - The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). - Photos will be captured at intervab of 1/30 second (I/24 second, if the scene was recorded at a frame rate of [_ PF24]).
ProtectingPhotosfrom the IndexScreen Options [mndividual Phetes] Opens the same screen described in ProtectLogSingle Photos ([_.3 107). Continue from step 3 of that procedure to protect the photo. [Selected Phetes] Protects all the photos selected in advance (marked with a ,/checkmark). Refer to Pre-setectLr W RecordLrWs from the Index Screen (83 57). [Reme_÷ Am_] Removes the protection from all photos. 1 Open the photo index screen.
[-¢BXBT}© [@ Copy (@,_ fssl)] [ r_J Copy (@,_1_)] appears on the screen. 3 SeBect (_1_} the photo you want to copy and press _). 4 Sebct (_) [Yes] and press 0 to copy the photo. 5 Repeat steps 3-4 to copy additionaB photos or press _) to cBose the menu. twice CopyingPhotosfrom the index Screen Options [am_Phetes] Copies allthe photos. Fhis Phete] Copies only the photo marked with the orange sebction frame. [Selected Phetes] Copies all the photos selected in advance (marked with a ,/checkmark).
If there is not enough space on the memory card, as many photos as possible will be copied before stopping the operation. If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy photos to the memory card. You may not be able to copy photos that were not recorded with this camcorder. You can also use the following functions...
Printing Photos Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order (83 117). PictBridge Canen printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PbtBridge logo. Connecting the Camcorder to the Printer 1 Set the camcorder to mode, singBe photo view.
During the following operations, even if you connect a printer to the camcorder it will not be recognized. - Deleting all photos - Removing all transfer orders - Removing all print orders _ will appear for photos that cannot be printed. We recommend powering the camcorder using the compact power adapter. Refer also to the printer's instruction manual.
Selecting the Print Settings You can select the number of copies and other settings for printing. Setting options vary depending on your printer model. Options [ _ Paper Size]* Availabb paper sizes van/depending printer model. [ _ Paper Type]* on the Select [Photo], [Fast Photo], [Plain] or [Default]. [@ Page Layeut]* Select [Default], [Bordered] or one of the following page layouts. [Borderbss]: The photo is enlarged and may be slightly cropped at the edges to fit the paper.
[× photos/sheet]: Printing multiple photos On the same sheet VVhen us!ng CanOn pdnters Y0u Can piint the Same phot 0 multiple times en the same sheet o_ paper. Use the £ollowing table as a guideline PIXMA/ SELPHY DS SELPHY 6P/ES 2, 4 or 82 2or4 2or4 With the [8 photos!sheet] setting, you can also use the specia! sticker sheets.
6 Sebct (AT, 4_) [Print] and press 0" Printing starts. The print settings menu disappears when the print job is completed. To continue printing, select (4_) another photo. To cancel a print job 1 Press 0 ([Stop]) while printing. 2 Select (4) [OK] and press 0" When you have finished printing Disconnect the USB cable from the camcorder and printer and turn off the camcorder. Print errors If an error occurs while printing, an error message (for example, [No paper]) will appear on the camcorder's screen.
Trimming Settings Set the paper size and page layout before changing the trimming tings. Trimming settings apply to one photo only. 1 Open the print settings set+ menu. Refer to steps 1-2 in Printing after Changing the Print Settings (qj 114). 2 SeKect (A_', _) [Trimming] and press @. The trimming frame appears. 3 Change the size of the trimming frame. + Move the zoom lever toward 1"to shrink the frame, and move it toward W to enlarge it.
Print Orders You can mark in advance the photos you want to print and set the desired number of copies as a print order. Later, you can easily print out the print orders by connecting the camcorder to a PictBridge-compatible printer (83 111). You can set print orders for up to 998 photos. _ ?O_HTSTOCHECK Set the print orders before connecting the supplied USB cable to the camcorder, Marking Single Photos with Print Orders 1 in single photo view, open the photo sebction _dl} [_ 2 Sebct screen.
Setting Print Orders fromtheindex Screen Options [mndividua_ Phete$] Opens the same screen described in MarkLog SLogle/Rhotos wit,e Print Orders (8/_3117). Continue from step 3 of that procedure to set the print order. [Selected Phetes (1 eepy each}] Sets a print order of I copy of each of the photos selected in advance (marked with a 7 checkmark). Refer to Pre-setectLeg RecordLrWs from the Index Screen (CS 57). [Remev÷Am_] Removes allthe print orders.
Cancelinga printjeb: Refer to page 115. Restarting printing:Open the print menu as explained in step 2. In the print settings menu, select [Print]* or [Resume] and press 0' The remaining photos will be printed. Printing cannot be restarted when the print order settings have been changed or if you deleted a photo with print order settings. * In case the print orderwas interruptedafter the first photo.
External Connections This chapter external explains device such how to connect as a T_; VCR, your camcorder to an or computer. Terminamson the Camcorder (4} COM PON ENT OUT Terminal* COMPONENT OUT Access: Open the side terminal cover. The component video terminal is for video only. When you use connection [3_, do not forget the audio connections using the AV OUT/O terminal. @}USB TerminaB USB Access: Open the side terminal cover.
ConnectionDiagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. HD_OUT HTC-!O0 HDMI Cable HDMI mini omtona stanaara HDM coRnecTo[ About the c0rH]ect0_- HDMI TM connection The HDM_ (High-Definition convenient all-digital Multimedia connection using Interface) a single connection cable ([]) for both is a video and audio.
CTC-IO0/S Component Cable _ (supplied) '_ @'}'r@ 0 @ 6"_bb STV-250NStereoVideoCable (supplied) 122 _ Ext_ a C,orr _cto s _ Blue _ Green ,,,,,,
USB (supplied) Ext_a C,orr _cto s_123
Pmaybackon a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition connections will ensure the best playback quality. 1 Turn off the camcorder and the TV. 2 Connect the camcorder to the TV. Refer to Connection Diagrams (CJ3121) and select the most appropriate connection for your TV. 3 Turn on the connected TV. On the TV, select as the video input the same terminal to which you connected the camcorder.
Saving Your Recordings Saving Your Recordings on a Computer Movies recorded with this camcorder are saved in the builtqn memory (_ only) or on the memory card. Because space is limited, make sure to save your recordings on a computer on a regular basis. PIXELA ImageMixer 3 SE With the software supplied on the Transfer Utilities CD-ROM you can select scenes and save them on your computer's hard disk. If necessary, video files previously saved on a computer can be restored back to the camcorder.
Authoring High-Definition (AVCHD) Discs and Photo DVDs You can connect the camcorder to the optional DW_100 DVD Burner to create high-definition DVD discs (AVOHD specifications). This way, you can save your video recordings in the highest video quality available. You can also create Photo DVDs from your photos that you can play back with most standard DVD players. Refer to this section along with the relevant sections in the instruction manual of the DW_100.
2 SeBect the scenes or photos you want to add to the disc. O [_ Menu] O _ or [_10 Desired option © i_J_i_} [Add Recordings to Disc] O Connecting to the DW-100 DVD Burner and Creating a Disc 1 Turn on the DVD Burner. Refer to CreatLrW DVDs. 2 Connect the camcorder USB cableo to the DVD Burner using the suppBied Connection 4_J.Refer to Connection Diagrams (83 123) and Connections. If the device type selection screen appears, select [DVD Burner] and press @.
To create an additional copy of the same disc After the operation is finished, insert a brand new disc, close the disc tray and repeat the operation. @ _dIPOR°_XbaT AVCHD discs containing scenes recorded in MXP mode cannot be created with the optional DW-100 DVD burner. Use the software on the supplied Video TooBs CD-ROM to save such scenes. While the camcorder is connected to the DVD Burner, do not open the memory card slot cover and do not remove the memory card.
Discs containing only scenes recorded in :FXP/XP+/SP/LP mode Canbeplayedback Cannotbeplayedback* the disc, Haying Back AVCHDDiscs Using the DW-IO0 DVD Burner You can use the optional DW-1 O0 DVD Burner and the camcorder also to play back high-definition (AVCHD) discs on a TV. This is very convenient, for example to play back your discs even in a location where an AVCHDcompatible DVD player is not available. 1 Connect the camcorder to the TVo Refer to Connection Diagrams (833 121).
After the disc is recognized, the disc's content will be displayed in an index screen. 6 SeBect (AT, _) the scene you want to play back and press O to begin the playback. @ IIIIPORIXIT While the camcorder is connected to the DVD Burner, do not open the memory card slot cover and do not remove the memory card. Only AVCHD discs created with the DW-100 DVD Burner can be played back using the DVD Burner. The camcorder's menus cannot be accessed while the camcorder is connected to the DVD Burner.
Connecting Connect the camcorder to the VCR using Connection [_. Refer to Connection Diagrams (C._ 122). Recording 1 External device: Load a blank cassette or disc and set the device to record pause mode. 2 Turn on the camcorder Verify that r-_-,10 and set it to [AV/Headphones] mode (G3 49}. is set to [_2_ A_vl, 3 Camcorder: Locate the scene you wish to copy and pause playback shortly before the scene. 4 Camcorder: Resume playback.
Preparations Install the software before you connect the camcorder to the computer for the first time. (Windows users only: you also need to select CameraWindow's autoqaunch setting.) After that, just connect the camcorder to the computer (steps 2 and 3) and proceed directly to transfer the photos (_ 134). 1 Install the software Disk CD-ROM. on the suppBied DiGiTAL VIDEO Solution Refer to the installation guide (separate leaflet included with the CD-ROM).
Operation may not work correctly depending on the software and the specifications/settings of your computer. If you wish to use the image files on your computer, make copies of them first. Use the copied flies, retaining the originals. During the following operations, even if you connect the camcorder to the computer it will not be recognized. - Deleting all photos - Removing all transfer orders - Removing all print orders We recommend powering the camcorder using the compact power adapter.
TransferringPhotos j Automatic Transfer Options All the relevant photos will be transferred to the computer in one batch and their thumbnails will be displayed on the computer. [_'B_A_ Phetes] Transfers all photos. [[_¢¢_a÷wPhetes] Transfers only those photos that have not yet been transferred to the computer. leo Phetes wi'_h T_ansfe_ 0_derg] transfer orders (_ 135). Manual Transfer Transfers photos marked with Options You can select the photo(s) to transfer.
2 Select (_1_) the photo you wish to transfer and press {_J. [E_ Select and Transfer]: Repeat this step to select other photos to transfer. The a, _ button will flash while the photos are being transferred. 3 Press to return to the transfer menu. When the camcorder is connected to the computer and the photo selection screen is displayed, press _ to return to the transfer menu. Transfer Orders You can mark in advance the photos you want to transfer to the computer as transfer orders.
Setting Transfer Orders from theindex Screen Options [mndi_idua_ Phetes] Opens the same screen described in MarkLog SLogle Photos with Transfer Orders (83 135). Continue from step 3 of that procedure to set the transfer order. [Selected Ph÷te$] Marks all the photos selected in advance (marked with a v_ checkmark) with a transfer order. Refer to Preselecting RecordLrWs from the index Screen (83 57). [Reme_÷ Am_] Removes all the transfer orders. 1 Open the photo index screen.
Additional contains nformation troubleshooting advice, This chapter sages, handling and maintenance tips, screen and other rues= information. Appendix: Menu Options Lists Menu items not availabb appear grayed select an item, refer to Using the Menus function, see the reference page. Menu page are explained default values. after the tables. out. For details about how to (722 35). For details about each options without a reference Menu options in boldface indicate FUNC.Menu FUNC.
Recording mode E_ DigitamEffect Off], [[_] Black& White], [_ Sepia] - o [_XP High Quality 24 Mbps], 0 m [FXP High Quality' 17 Mbps], lAP÷ High Quality' 12 Mbps], E_P Standard Play 7 Mbps], [LP Long Hay 5 Mbps] 138*Ad:t< a _fo/_Yato_ 45
FUNC. Menu - P_ayback Modes (movb playback), _ (playback of video snapshot scenes): _ - avaibble only in the original index screen; @ -- availabb only in the playlist index screen; e - availabb in both; ------- not availabb in either. (photo playback): _ -- availabb only in single photo view; @ - available only in the photo index screen; • -.available in both; -- - not availabb in either.
TransferOrders] .... ¢ individu;iPh;i;sil is;J; i;d Phoi;sil : : ; - ¢ 135 [RemoveAll] [AllScenes],[ThisScene] [AllPhotos],[ThisPhoto], SelectedPhotos] - CalendarScreen],[DateSelection] ¢ ¢ - Sceneswith Faces] e - - [Buimt-inMere.I, [Mem=Card] o o 42 [FrameRate] [_ [_ 60i (Standard)], [[_ PF24] ® - - [x.v.
[_ PF24]: 24 frames per second, progressive. Using this frame rate will give your recordings a cinematic look. When combined with the [t_ Cine Mode] recording program (q3 64), the cinematic look will be enhanced. [xowCele_]: Uses a color space with an extended gamut to achieve deeper colors, closer to real life. Use this function to record video only when you intend to play back your recordings on an HDTM compatible with x.v.Color, connected to the camcorder using an HDMI cable. If recordings made with x.v.
[Microphone [_ On _], [Digita_ Zeem]_ Determines the operation of the digital zoom, The color of the indicator indicates the zoom, When activated, the camcorder will switch automatically to digital zoom when you zoom in beyond the optical zoom range.
[mmag÷Stabi_i£e_]s The image stabilizer compensates for camcorder shake even at full telephoto. The image stabilizer is designed to compensate for a normal degree of camcorder shake. We recommend setting the image stabilizer to [_ OfT 7 when using a tripod. [AGC Limit]_ Sets a maximum value for the automatic gain control. When recording in dark places, the lower the maximum AGC limit, the darker the scene will be recorded. The highest gain levels will be available when set to [_ Automatic].
Ii_ / r-_ Camera Setup 3 [SelfTimer] [_ OnQ], [_ FocusAssist Functions] [_ On], [_ AssistFunctions] [_ [_ Off], [_ Zebra(70%)], Zebra(100%)],[_ Peaking], [_ ]PeakingColor] .......
* This function can also be assigned to the custom key/dial ([Z3 85). [Peaking CeJer]: Select the color of the emphasized outlines when [Assist Functions] is set to [_ Peaking] or [_ B&W and Peaking]. [Onscreen Markers]: You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally). * Using the onscreen markers will not affect the recordings.
[U$I Cenneetiel Tyle],',' Select the connection protocol to use when connecting the camcorder to an external device using the supplied USB cable. [_ DVD Burner]: To connect exclusively to the optional DW-IO0 DVD Burner. [_ Computer/Printer]: To connect to a computer, printer or similar USB peripheral. [_<,_Connect and Set]: To make the selection from a screen that appears at the time of the connection to the external device.
_Ou'_putOnscreen Displays] When set to [_ On], the camcorder's on-screen displays will appear also on the screen of a TV or monitor connected to the camcorder. [LC# Brightness]: Adiusts the brightness of the LCD screen. Changing the brightness of the LCD screen does not affect the brightness of your recordings or the brightness of the playback image on a TV. [LCD Seree_ Dimmer]: When set to [_ On], the LCD screen is dimmed.
To cancel the demo mode once it has started, press any button or turn off the camcorder. [_1 System Setup 2 [Custom Key/Dial] [_ Off], [H [H Focus], Exposure], [B [B Assist Functions], Mic. LeveB], [_ AGO Limit] [_ Off], [_ e Exposure], ......
[Power SaviHg Mode_: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes.
[l_ Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card. We recommend using the [_ Continuous] setting. The photo number indicates the name and location of the file on the memory card. For example, the file name of a photo numbered 101 01 07 is "IMG 0107.
I_l mnfermatien [BatteryInfo] [HDM!Status] Screens - • o • • - o • o o - I[_eme_'y _nfe]/[Meme_ Card mnfe]_Displays a screen where you can verify how much of the built-in memory (_[_ only) or the memory card is currently in use (_ total recording time and _ total number of photos) and how much space remains available for recording.
Troubleshooting If you have a problem times what you think with your camcorder, is a malfunction refer to this section. of the camcorder Some- may have the simplest of solutions - please read the "CHECK THiS FIRST" before going on to the more detailed problems and solutions. your dealer or a Canon Service Center if the problem persists.
After using the camcorder foralong time, itbecomes hot. - The camcerder may become hot after using it contieuoustyfor long periodsof time; this is not a malfunction. If the camcerder becomes unusually hot or it becomes hot after using it only for a short while, it may indicatea problem with the camcorder. Consult a CanoeService Center. The battery pack is exhausted extremety quickty even at normal temperatures. - The battery may have reachedthe end of its battery life. Buy a new battery pack.
Playback Cannot add scenes to the playlist. - The playlist can contain a maximum of g99 scenes.If the playlist includes scenes recordedin MXP or FXPmode, the maximum number of scenes in the pBylist may be lessthan g9g. - Youmay not be able to add scenesto the playlist if they were recordedor edited using another device. - Youmay not be able to add to the playlist scones that were edited using the software on the supplied Video Tools CD-ROMand were then written back to the camcorder. Cannot delete a scene.
The red ON/OFF (CHG) ffldicator flashes rapidly (_i one flash atO.5=second intervals). -Charging has stopped because the compact power adapter orthe battery pack isfaulty. Consult aCanon Service Center. The red ON/OFF (CHG) indicator flashes very slowly (I_< -:_] one flash at2= second intervaB). - The temperature of the battery pack is outside the charging range.
A rattling can be heard from the camcorder. - The internal lens fixture can movewhen the camcorder is turned off. This is not a malfunction. Memery Card and Accessories Cannot insert the memory card. - The memory cardwas not facing the correct direction. Turn the memory card over and insert it (E_ 41). Cannot record on the memory card. - The memory card is full Delete some recordings (l_[_ 58, 97) to free some spaceor replace the memory card.
The camcorder isconnected using the optional HTCot O0 HDMI CaNe, but there is no picture or sound from the HDTV. - Disconnectthe BTC-tO0HDMI BaNe and then restore the connection or turn the camcorder off and then on again. The camcorder is connected using the optional HTCqO0 HDMICable, but HDfv]FCECdoes not work (cannot play back using the TV's remote control). - Disconnectthe BTC-IO0HDMI cane and turn off the camcorder and the TV.
Accessing the memory card. Donot remove the memory card. - Youopenedthe memory card s!otcover whib the camcorder was accessingthe memorycard or the camcorder started accessingthe memory card as you openedthe memory card slot cover. Do not removethe memory card until this message disappears. Sack up recordings regularly - This message may appear when youturn on the camcorder, in the event of a malfunction, recordings may be lost so back upyour recordingsregularly. Buffer overflow. Recording was stopped.
Cannot play tbe movies inthebuiINn memory, Initialize only using the camcorde -The camcorder's built-in memory was initialized using acomputer. Initialize the built-in memory with this camcorder ([_42). Cannot play themovies onthis memory card -Movies cannot beplayed back from a64MB orsmaller memory card. Cannot play themovies onthis memory, card initialize only using the camcorder -The memory card inthe camcorder was initialized using acomputer. Initialize the memory card with this camcorder ([_42).
-Ifafter themessage disappears, _ appears inred, perform the following: Turn offthe camcorder and remove and reinsert the memory card. if@turns back togreen you can resume recording/playback. -initialize the memory card (_ 42). (Doing sowillerase allthe recordings onthe memory card.) Connect thecompact power adapter -When the camcorder isin mode and isconnected toacomputer, this message wiil appear ifthecamcorder isbeing powered bythe battery pack. Connect the compact power adapter tothe camcorder.
May not be possibb to record movies on this memory card - Youmay net be able to record movies on a memory card without a Speed Class rating. Replacethe memorycard with one rated Speed Class 2 or higher. Mere. Card Number of scenes already at maximum - The memory card alreadycontains the maximum number of scenes (3,999 scenes); nofurther scenes can be copied ontothe memory card. Delete some scenes (_ 58) to free some space. Mere.
Operation canceled -The operation was canceled following user intervention. Playlist isfull.Cannot divide thescene. -Scenes cannot bedivided when the playlist already contains ggg scenes. Delete some scenes from the playlist (_ 89). Print order error Youattempted to set more than 998 photos in the print order. Reading the built-in memory Reading data from the built-in memory. Reading the memory card Reading data from the memory card. Scene recorded using another device. Cannot divide the scene.
This scene was recorded using another device and cannot becopied. - Scones that were not recordedwith this camcorder cannot be copiedto the memory card. Toe many photos. Disconnect the USe cable. - Disconnectthe USBcable. Try using a memory card reader or decreasethe number of photos on the memory card to fewer than 2,500 photos. - if a dialog box appeared on the computer screen, close it. Disconnectthe USBcable, and restore the connection after a short while.
- Check that the USBcane was not accidentally disconnected. No disc - Insert a disc intothe DVDBurner. - This message can appearalso if condensationhas formed (_ burner dries completely before resuming use. 172). Wait until the DVD No photos - There are no photosto add to the disc. No scenes - There are no scenesto add to the disc. No scenes left to add - There are no scenesthat have not already been added to discs created previously.
File error -You attempted toprint aphoto that was recorded with another camcorder, has adifferent compression, orwas edited onacomputer. Hardware error -Cancel printing. Turn offthe printer and turn itback on. -Check the printer status. -Ink tank errors have occurred. Replace the ink tank. Incompatible paper size -The paper settings ofthe camcorder conflict with the printer's settings. Ink absorber full -Select [Continue] toresume printing.
& Print order error - Youattempted to set more than 998 photos inthe print order. Printer cover open - Close the printer cover securely. Printer error - A malfunction hasoccurred that may require repairs. (CanonPIXMAprinters: the printer's green power lamp and orange error lamp flash alternately.) - Disconnectthe USB cable and turn off the printer. Unplugthe printer's power cord from the power outlet and contact the appropriate customer support center or service center.
Handling Precautions Camcorder Be sure to observe the following formance. precautions to ensure maximum per- Save your recordings periodica[[yo Make sure to transfer your recordings to an external device such as a computer or digital video recorder (1:2] 125) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. Do not carry the camcorder by the LCD panel.
When recording movies, try to get a calm, stable picture. Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness. If you experience such a reaction, immediately stop the playback and take a rest break as necessary.
Remaining battery time If the remaining battery time displayed is not correct, charge the battery pack fully, Still, the correct time may not be displayed if a fully charged battery pack is used continuously in high temperatures or it is left unused for long periods of time, Also, the correct remaining time may not be displayed, depending on the battery life, Use the time shown on the screen as an approximation, Regarding the use of non-Canon battery packs For your safeb/, battery packs that are not genuine
SD/SDHC memor`/cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card's content. To write-protect the memory card set the switch to the LOCK position. Built-in Rechargeabb LOCKswitch Lithium Battery The camcorder has a builtqn rechargeable lithium battery to keep the date/time and other settings.
Wipe the batter,/with a clean dry cloth to ensure proper contact, Fer CaJifemia,USAenly: The lithium batter,/included contains Perchlorate Material - special handling may apply. See www,dtsc,ca,gov/hazardouswaste/perchlorate for details, Disposal When you delete movies or initialize the built-in memory (_ only) or memory card, only the file allocation table is altered and stored data is not physically erased.
Maintenance/Others Charting Camcorder Body Use a soft, dr`/cloth to clean the camcorder body, Never use chemically treated cloths or volatile solvents such as paint thinner, Lens and instant AF Sensor if the lens surface or instant AF sensor is dirty, autofocus may not work properly.
When condensation is detected The camcorder automatically shuts off. The precise time required for water droplets to evaporate will vary depending on the location and weather conditions. As a general rule, wait for 2 hours before resuming use of the camcorder. Usingthe CamcorderAbroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz.
_yst_m umdyrdm (Availabili_ Optional accessories the following pages. differs from area to area) not listed below, are described in more detail in VCR/DVD recorder * Accessoriesthat are;compatibb with the Advanced Accessory Shoecannot be atLachedto this camcorder.Look for the Mini ADVANCED SHOE logo to ensure compatibilitywith the mini advancedshoe. _} SSoB00iSSo650ShoulderStrap @ WSo30Wrist Strap (_ WLoD88WirelessController @ CAo570Compact PowerAdapter _7)DWol00 DVDBurner @ IFCo400PCU USBCable 174.
OptionamAccessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Charging Times The charging times given in the following table are approximate and van/ according to charging conditions and initial charge of the battery pack. Usingthe camcorder Usingthe CG-800BatteryCharger Recording and Playback 155rain. 275rain. 395rain. 105min. 190min. 260min. : Times Recording and playback times given in the following tables are approximate and van/according to recording mode and charging, recording or playback conditions.
Usinga memory card Maximum recording time BP-807 BP-808 min. min.tOOmin, tOOmin. OOmi Typicalrecording time* 60 min= 60min= 65 min= 65min= 65min= Playback time 150min. 155min. 155min= 160min. 160min. 190 min. 190min. 200min. 200min. 200 min. Typicalrecording time* 125min. 130min. 130min. 130rain. 130min. Playback time 300min. 305min. 315rain. 315rain. 315min. 290 min. 295min. 305min. 305min. 305 min. Typicalrecording time* t9Omin, t9Omin. 200min. 200min. 200min.
(9) WD-H58 Wide-converter This Wide-converter lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. When the Wide-converter is attached, a shadow may appear in the picture when you use the flash. @} Protect 58 mm Filter 58 ram, ND4L Filter Neutral density and MC protector filters help you to control difficult lighting conditions. {_ SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories.
,_ VFL-2 Video Flash Light This video flash light allows you to record photos and movies even at night or in dark places, it attaches to the camcorder's mini advanced shoe for cablefree operation. (_ HTO-100 HDMI Oab_e Use this cable to connect the camcorder to an external device using an all-digital connection, allowing you to enjoy playback at the highest quality. This cable sends both video and audio signals. This mark identifies genuine Canon video accessories.
Product Codes Provided Accessories CA-570 Compact Power Adapter BP-807 Battery Pack WL-D88 Wireless Controller STV-250N Stereo Video Cable IFC-400PCU USB Cable Optional 3067A002AA 9370A001AA Accessories BP-819 Battery Pack BP-827 Battery Pack CG-800 Battery Charger TL-H58 Tele-converter WD-H58 Wide-converter Protect Filter 58 mm ND4L Filter 58 mm VL-5 Video Light VFL-2 Video Flash Light DM-100 Directional Stereo Microphone HTC-100 HDMI Cable CTC-100 Component Cable SS-650 Shoulder Strap SS-600 Shoulder
Specifications WX_AHFSIOH_X_AHF$100 System Recording System Movies: AVCHD Photos: Video compression: MPEG-4 AVC/H264; Audio compression: Delby Digital 2ch DCF (Design rule for camera system), compatible with Exif* Ver. 2.2 and with DPOF Image compression: JPEG (Super Fine, Fine, Normal) * This camcorder supports Exif 2.2 (alsocalled "Exif Print"). Exif Print is a standard for enhancing the communication be'_¢_eee camcorders and printers.
,, Lens Configuration: 11 elementsin 9 groups(2 asphericelements) ,, AF System Autofocus(TTL+ externaldistancesensorwhen set to [InstantAF])or Manualfocus ,, Filter Diameter: 58 mm ,, Minimum Focusing Distance 1 m (3.3 ft.); 1 cm (0.39in.) at full wide angle ,, White Balance Auto white balance,customwhitebalanceandpresetwhitebalancesettings: Daylight,Shade,Cloudy,Tungsten,Fluorescent,FluorescentH ,, Minimum Hiuroination 0.
+Power consumptUoe: &6W(SP mode, AF on, LCD normal brightness) + Operating temperatt_ra:0 - 40 _C(32 - 104°El + DUmeesUouls [W x H x D] (exciudUegthe grip belt): 70x 69x 136 mm (2.8x 2.7 x 5+4in+) +WeUght(camcorder body only): 450 g (15.9oz.
About the music files The specifications are as follows. of the music flies compatible with the camcorder Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum bngth: 1 second FHe extension: WAV The music data is saved in the memory under the following folder structure. In the builtqn memory: On the memory card: CANON ..... __........
index 24F progressive frame rate 24p Cinema Mode ............. . . 26, 140 64 A Abroad, using the camcorder .... AF-assist lamp .............. AGC (automatic gain) limit ...... Aperture (f number) ............ Aspect ratio of a connected TV (TV type) .................. Assist functions .............. 173 101 143 62 Audio recording level ........... Auto exposure bracketing ...... Auto slow shutter ............ Autofocus (AF) AF frame (9-point AiAF/Center point) Instant AF/Normal AF ......
FUNC. menu ............. 36,137 P H HDMI OUT terminal ........... HDMI-CEC ................. Headphones ................. Histogram .................. 121 149 81 105 1 Image effects ................ Image stabilizer .............. Index screen .............. Initialization (built-in memory*/memory 76 143 49, 51 card)..42 J Joystick Joystick .................... guide ................ 35 35 L Language ................... LCD screen .................. LCD screen dimmer ........... Light metering mode .
Self timer................... 69 Troubleshooting ............. Serial number ................ 22 Tv (recording program) ......... Setup menus ............. 36,140 U Shutter speed ................ 62 120, Simultaneous recording ........ 103 USB terminal ........... Slideshow .................. 104V Snow (recording program) ....... 61 Video snapshot ............... Special Scene 49, 81, (recording programs) .......... 60 Volume .............. Sports (recording program) ......
I USA d CANON CONSUMER DiGiTAL VIDEO EQUIPMENT WARRANTY FOR THE UNITED STATES LIMITED The Hmitadwarranty set forth be_ow[sgiven by Canon U.S.A. lee. ("Canon USA")with respect to CanonConsumer Digital VMeo Equipment _lhe "Equipment") purchased in the United States TMs limited warranty [s oMy effective upon presentation of your Bill of Sale or other proof of purcbose.
LOSSORCORRUPTION OF DATA,iNCLUDiNGWITHOUTLIMIEAT_ON, LOSS ORCORRUPTION OF DATASTOREDON THEEQUIPMENT'SHARDDR_VE,ORANY OTHERSPECAL, iNCIDENTALORCONSEQUENTALDAMAGESCAUSEDBY THEUSE,MISUSEOR_NABIUTYTO USETHE EQUIPMENT, REGARDLESSOFTHELEGALTHEORYONWHICHTHE CLAIM ISBASED,AND EVENIF CANONUSA HAS BEENADVISEDOFTHE POSSIB_LITY OF SUCHDAMAGES.NOR SHALLRECOVERY OFANY KINDAGAINSTCANONUSABE GREATER THANTHE PURCHASE PRICEOFTHE EQUIPMENTSOLDBYCANONUSA ANDCAUSINGTHEALLEGEDDAMAGE.
[ CANADA 1 CANON CONSUMER WARRANTY DIGITAL VIDEO EQUIPMENT LiMiTED The limited warranty seL forth below is given by Canon Canada Inc, ('Canon Canada') with respect to Canon Consumer Digital Video Equipment (the 'Equipment") purchased in Canada, This limited warranty is only effective upon presentation a bill of sale or o_her proof of purchase for this Equipment to a Canon Service Facility when repairs are required, The Equipment is warranLed under normal, non-eommercMI, follows: personal use, againsl d
