38% ',0 +'9 &DPFRUGHU ,QVWUXFWLRQ 0DQXDO (QJOLVK &DPpVFRSH +'9 0DQXHO G¶LQVWUXFWLRQ )UDQoDLV &iPDUD +'9 0DQXDO GH ,QVWUXFFLRQHV (VSDxRO 0LQL 'LJLWDO 9LGHR &DVVHWWH 3OHDVH UHDG DOVR WKH IROORZLQJ LQVWUXFWLRQ PDQXDO HOHFWURQLF YHUVLRQ RQ 3') ILOH )RU IXUWKHU GHWDLOV UHIHU WR WKH LQVWDOODWLRQ JXLGH 9HXLOOH] OLUH DXVVL OH PDQXHO G¶LQVWUXFWLRQ VXLYDQW YHUVLRQ pOHFWURQLTXH VXU ILFKLHU 3') 3RXU G¶DXWUHV GpWDLOV UpIpUH] YRXV DX JXLGH G¶LQVWDOODWLRQ /HD WDPELpQ HO VLJXLHQWH PDQXDO GH LQVWUXFFLR
Important Usage Instructions Introduction WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HDV Camcorder, HV10 A systems This device complies with Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon HDV Camcorder HV10 A and all its accessories. 1 2 4 5 6 7 8 9 11 12 13 Power Sources — The CA-570 Compact Power Adapter should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
Fig. 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 18 Damage Requiring Service — Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product. c. If the product has been exposed to rain or water. d.
E Enjoying High-Definition Video Preserve your most treasured memories, be it unforgettable scenic beauty or cherished moments spent with family and friends, with high definition video recordings of a quality second only to actually being there. What is High-Definition Video? 1,080 lines How to play back your HDV recordings? On a high-definition TV (HDTV) ( 57) HDV recordings will be played back in their original high quality.
Table of contents Introduction Enjoying High-Definition Video ....................................................................... 5 About this Manual ........................................................................................... 9 Getting to Know the Camcorder Supplied Accessories.................................................................................... 11 Components Guide .......................................................................................
Editing Functions Still Image Options Erasing Still Images .......................................................................................55 Protecting Still Images ...................................................................................55 Initializing the Memory Card ..........................................................................56 External Connections Connecting to a TV or VCR Connection Diagrams ............................................................................
Additional Information Trouble? Troubleshooting ............................................................................................ 73 List of Messages ........................................................................................... 76 Do’s and Don’ts Handling Precautions.................................................................................... 79 Maintenance/Others......................................................................................
About this Manual E Thank you for purchasing the Canon HV10. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to the Troubleshooting table ( 73). Conventions Used in the Manual Brackets [ ] and capital letters are used to refer to menu options as they are displayed on screen. Menu options in boldface indicate the default setting (for example [ON], [OFF]).
About the Operating Modes The camcorder’s operating mode is determined by the positions of the power switch and the / switch. In the manual, indicates that a function is available in the operating mode shown and indicates that the function is not available. When no operating mode icons are given, the function is available in all operating modes.
Getting to Know the Camcorder 11 Getting to Know the Camcorder Supplied Accessories E BP-310 Battery Pack WL-D87 Wireless Controller Lithium Button Battery CR2025 for Wireless Controller CTC-100 Component Cable STV-250N Stereo Video Cable IFC-300PCU USB Cable DIGITAL VIDEO SOLUTION DISK Software CD-ROM* * Includes the electronic version of the Digital Video Software instruction manual on PDF file. The serial number of this product can be found at the battery attachment unit of the camcorder.
Getting to Know the Camcorder Components Guide Left side view Right Side View Front view REC PAUSE button ( 61, 62)/ Self timer button ( 52) BACKLIGHT button ( 22) D.EFFECTS button ( 53) (record review) button ( 25)/ (rewind) button ( 27)/ Card – button ( 29) (flash) button ( 51)/ / (play/pause) button ( 27) LIGHT button ( 52)/ (fast forward) button ( 27)/ Card + button ( 29) DISP. (display) button ( 50) DRIVE MODE button ( 49)/ (stop) button ( 27) RESET button ( 73) BATT.
Getting to Know the Camcorder Back view Bottom view LCD screen ( 21) Memory card slot ( 20) USB terminal ( 64) CHG (charge) indicator ( 18) DC IN terminal ( 18) FOCUS ASSIST button ( 45) CARD access indicator ( 26) Remote sensor ( 21) Dioptric adjustment lever ( 20) Viewfinder ( 20) MENU button ( 22, 31) Power indicator ( 10) SET dial ( 9) POWER switch ( 10) FUNC.
Getting to Know the Camcorder Wireless Controller WL-D87 START/ STOP PHOTO ZOOM CARD DATE SEARCH REW PLAY FF STOP PAUSE ZERO SET MEMORY SLOW DISP. TV SCREEN WIRELESS CONTROLLER WL-D87 START/STOP button ( 25) CARD –/+ buttons ( 29) DATE SEARCH / buttons ( 29) REW button ( 27) –/ button ( 27) PAUSE button ( 27) SLOW button ( 27) ZERO SET MEMORY button ( 28) DISP.
Getting to Know the Camcorder 15 Screen Displays E Recording Movies Introduction Recording Still Images Recording program ( 40) White balance ( 45) Image effect ( 46) Digital effects ( 53) Still image quality/size (simultaneous recording) ( 48) Self timer ( 52) Recording reminder Instant AF ( 31)/Manual focus ( 44) Recording standard (HDV or DV) ( 32) DV recording mode ( 32) Tape operation Time code (hours : minutes : seconds : frames) Remaining tape Remaining battery charge Image stabilizer ( 32) Wi
Getting to Know the Camcorder Recording reminder The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short.
Getting to Know the Camcorder 17 Playing Movies E Tape operation Time code (hours : minutes : seconds : frames) Remaining tape Data code ( 51) Search function display END SEARCH ( 28)/ DATE SEARCH ( 29) Quality/size for capturing still images ( 49) Image number ( 33) Current image / Total number of images Histogram ( 51) Image protection mark ( 55) Still image quality/size Date and time of recording Recording program ( 40) Manual focus ( 44) Light metering mode ( 43) Manual exposure ( 43) Image effect (
Getting Started Preparations • Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks. Getting Started Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. Remove the battery terminal cover before attaching the battery CHG (charge) indicator 3 Connect the power cord to the compact power adapter.
Getting Started • You can also use the compact power adapter without attaching a battery pack. • When the compact power adapter is connected, even if a battery is attached its power will not be consumed. ONCE THE BATTERY IS FULLY CHARGED 1 Disconnect the compact power adapter from the camcorder. 2 Unplug the power cord from the power outlet and the compact power adapter. Slide down BATT.RELEASE to release the battery pack, and pull out the battery pack holding it from the ridge on its bottom part.
Getting Started 1 Turn off the camcorder. 2 Open the memory card slot cover. 3 Insert the memory card straight all the way into the memory card slot. 4 Close the cover. Do not force the cover closed if the memory card is not correctly inserted. 3 Press the 4 mark on the cassette compartment until it clicks. Wait for the cassette compartment to retract automatically and close the cassette compartment cover.
Getting Started 2 Adjust the viewfinder. 3 21 3 Insert the battery holder. Keep the LCD panel closed to use the viewfinder and adjust the dioptric adjustment lever as necessary. Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/stop button with your thumb. I.AF sensor Using the Wireless Controller NOTES NOTES To make use of the full capabilities of the instant AF function ( 31), be careful not to obstruct the I.AF sensor.
Using the Menus degrees is also useful if you wish to include yourself when recording with the self timer. Using the Menus Using the Menus Many of the camcorder’s functions can be adjusted from the menus that open after pressing the MENU button ( MENU ) and the FUNC. button ( FUNC. ). For details about the available menu options and settings, refer to Menu Options Lists - MENU/FUNC. ( 31).
First Time Settings 4 Select ( 5 ) the desired option and press SET to save the setting. Press MENU . You can press MENU to close the menu at any time. 23 First Time Settings First Time Settings E Changing the Language Options Selecting a FUNC. Menu Option [DEUTSCH] [ [ENGLISH] [ [ESPAÑOL] [ [FRANÇAIS] [ [ITALIANO] [ [POLSKI] [ Default value ] ] ] ] ] ] LANGUAGE ENGLISH MENU ( 1 Press FUNC. .
First Time Settings Changing the Time Zone Setting the Date and Time Default value DATE/TIME SETUP DATE/TIME SETUP DATE/TIME JAN. 1, 2006 12:00 AM T.ZONE/DST NEW YORK MENU ( 22) 1 Press MENU . 2 Select ( ) [DATE/TIME SETUP] 3 4 and press SET . Select ( ) [T.ZONE/DST] and press SET . The time zone setting appears. The default setting is New York. Select ( ) your time zone and press SET . To adjust for daylight saving time, select the time zone with the mark next to the area.
Recording 25 Basic Functions Recording Recording Recording Movies Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads ( 82). ( 10) Press . The camcorder will play back a few seconds of the last recording made and return to record pause mode. If the currently selected recording standard is different from that of the last recording, the picture may not be played back correctly.
Recording When using a tripod: Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of the light by the lens). Do not use tripods with fastening screws longer than 5.5 mm (0.2 inch). Doing so may damage the camcorder. IMPORTANT Avoid the following actions while the card access display ( ) appears on screen and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.
Playback 10x Optical Zoom Move the zoom lever toward W to zoom out (wide-angle). Move it toward T to zoom in (telephoto). You can also change the zoom speed ( 31). You can select one of three fixed zoom speeds or a variable speed that depends on how you operate the zoom lever: Press gently for a slow zoom; press harder for faster zooms. 27 Playback Playback E Playing Back Movies Play back the tape on the LCD display or close the LCD panel to use the viewfinder.
Playback SPECIAL PLAYBACK MODES To operate the special playback modes use the buttons on the wireless controller. There is no sound during the special playback modes. To return to normal playback from the special playback modes, press / . Fast Playback: During normal playback press / . Keep the button pressed to rewind/fast forward the tape while continuing the playback. Reverse Playback: During normal playback press . Frame Reverse/Advance: During playback pause press / .
Playback POINTS TO CHECK 29 NOTES Stop the playback before using this function. E Recordings shorter than 1 minute per date/ time zone cannot be located with this function. Date search may not function if the date, time or data code are not correctly displayed. If there are sections recorded in different standards (HDV/DV) on the same tape, the date search may not work correctly. Viewing Still Images Press END SEARCH . • “END SEARCH” appears.
Playback IMPORTANT Magnifying the Playback Image Avoid the following actions while the card access display appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover and do not remove the memory card. - Do not disconnect the power source or turn off the camcorder. - Do not change the position of the / switch or the operating mode. The following may not be displayed correctly.
Menu Options Lists Advanced Functions Menu Options Lists Menu Options Lists Menu items not available appear in black on the screen. For details about how to select an item, refer to Using the Menus ( 22). MENU Options Camera Setup (Digital Zoom, Image Stabilizer, etc.) 31 With the digital zoom the image is digitally processed, so the image resolution will deteriorate the more you zoom in. The digital zoom indicator will appear in light blue from 10x up to 40x and dark blue from 40x up to 200x.
Menu Options Lists Recording/Video Input Setup (HD Standard, DV Recording Mode, etc.) AF AST LAMP ( 52) REC/IN SETUP HD STANDARD [ AUTO], [ OFF] FOCUS PRI. [ ON], [ OFF] The camcorder records the still image only after the focus has been adjusted. Set it to [ OFF] if you wish to record a still image as soon as you press PHOTO . When set to [ OFF], no focusing frame appears. Focus priority cannot be turned off when the mode switch is set to .
Menu Options Lists made in LP mode. We recommend using the SP mode for important recordings. If you make recordings in both SP and LP modes on the same tape, during playback you may notice some video problems in the picture at the point where the recording mode changes. When playing back in this camcorder tapes recorded in LP mode with other devices or vice versa, you may notice some problems in the playback picture or the sound may stop briefly.
Menu Options Lists We recommend using the [ CONTINUOUS] setting. Playback/Video Output Setup (Playback Standard, Component Video Out, DV Out etc.) PLAY/OUT SETUP PLAYBACK STD Card Operations (Initialization, Erase All Images, etc.) CARD OPERATIONS PRINT ORD.ALL ERASE ( 72) [NO], [YES] TRANS.ORD.ALL ERASE ( 68) ( 55) [NO], [YES] ERASE ALL IMAGES [NO], [YES] INITIALIZE ( 56) [NO], [YES] * The following options are available only when you press MENU in the index screen.
Menu Options Lists AUDIO OUT [ STEREO1], [ STEREO2], [ MIX/FIXED], [ MIX/VAR.] You can select the audio track to use during the playback of a tape with audio dubbed over the recording. [ STEREO1]: Original sound only. [ STEREO2]: Dubbed audio only. [ MIX/FIXED]: Mixed audio with the original sound and dubbed audio at the same level. [ MIX/VAR.]: Mixed audio where the balance between the original sound ( ) and the dubbed audio ( ) can be adjusted. COMP.
Menu Options Lists Display Setup (LCD Brightness, Language, etc.) DISPLAY SETUP BRIGHTNESS in order to allow you to focus manually more easily. Using the assist functions will not affect the recordings on the tape or memory card. TV SCREEN Adjust ( ) the brightness of the LCD display with the SET dial. Changing the brightness of the LCD display does not affect that of the viewfinder or the recordings.
Menu Options Lists DEMO MODE camcorder shuts off, the message “ AUTO POWER OFF” will appear. E HDV ILLUM. [ ON], [ OFF] The demonstration mode displays the camcorder’s main features. It starts automatically when the camcorder is powered with the power adapter if you leave it turned on without loading a recording media for more than 5 minutes. To cancel the demo mode once it started, press any button, turn off the camcorder or load a recording media.
Menu Options Lists Mode switch: [ PROGRAM AE], [ SHUTTER-PRIO. AE], [ APERTURE-PRIO. AE] Mode switch: [ PORTRAIT], [ SPORTS], [ NIGHT], [ SNOW], [ BEACH], [ SUNSET], [ SPOTLIGHT], [ FIREWORKS] Light metering mode ( 43) Mode switch: [ EVALUATIVE], [ CENT.WEIGHT.AVERAGE], [ SPOT] Mode switch: [ SINGLE], [ CONT.SHOOT.], [ HISPEED CONT.SHOOT.], [ AEB] Digital effects Mode switch: [ D.EFFECT OFF], [ [ EFFECT] Mode switch: [ D.
Menu Options Lists Still image capturing ( 49) Recordings made in [ HDV]: [ LW S.FINE/1920x1080], [ LW FINE/1920x1080], [ LW NORMAL/1920x1080] Recordings made in [ DV(WIDE)]: [ SW S.FINE/848x480], [ SW FINE/848x480], [ SW NORMAL/848x480] Recordings made in [ DV(NORMAL)]: [ S S.FINE/640x480], [ S FINE/640x480], [ S NORMAL/640x480] IMAGE ERASE ( 55) SLIDESHOW ( 30) ( 71) [CANCEL], [START] PRINT ORDER [ 0] - [ 99] COPIES Set a print order for a still image on the memory card. ( 67) E [ TRANS.
Recording Programs Recording Programs Using the Recording Programs Auto The camcorder adjusts the focus, exposure and other settings automatically, allowing you to just point and shoot. : Flexible Recording Programs ( [ PROGRAM AE] The camcorder sets the aperture and shutter speed. 41) [ SHUTTER-PRIO. AE] You select the shutter speed. : Special Scene Recording Programs ( [ APERTURE-PRIO. AE] You select the aperture value.
Recording Programs Flexible Recording: Changing the Aperture and Shutter Speed Use the automatic exposure (AE) program or give priority to the exposure value or the shutter speed. 41 FUNC. Icon of the currently selected Recording Program FUNC. Desired option E TO SET THE APERTURE VALUE OR SHUTTER SPEED 1 Press SET . 2 Select ( ) the desired value and POINTS TO CHECK ( 10) press SET .
Recording Programs [ SHUTTER-PRIO.AE] - When using a slow shutter speed in dark places, you can obtain a brighter image, but the image quality may be lower, and the autofocus may not work well. - The image may flicker when recording with high shutter speeds. - Recording movies under fluorescent lights: If the screen starts to flicker, select [ SHUTTERPRIO.AE] and set the shutter speed to 1/100. [ APERTURE-PRIO.
Adjusting the Picture: Exposure, Focus and Color 43 Adjusting the Picture: Exposure, Focus and Color Adjusting the Picture: Exposure, Focus and Color Light Metering Mode Manual Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). To correct this you can manually adjust the exposure.
Adjusting the Picture: Exposure, Focus and Color Automatic Focus Modes Manual Focus Adjustment You can change the AF (autofocus) frame selection mode. When the mode switch is set to , 9 point AiAF is automatically selected. Autofocus may not work well on the following subjects. In such case, focus manually.
Adjusting the Picture: Exposure, Focus and Color 45 2 Press Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. 3 FOCUS ASSIST . The center of the picture will be magnified and the silhouettes will be emphasized. Adjust ( ) the focus as required until the image appears focused. E NOTES 1 Adjust the zoom. 2 Keep FOCUS pressed down for more than 2 seconds. • appears. • Pressing FOCUS again will return the camcorder to autofocus.
[ Adjusting the Picture: Exposure, Focus and Color SHADE] For recording in shaded places. [ CLOUDY] For recording on a cloudy day. [ TUNGSTEN] For recording under tungsten and tungsten type (3-wavelength) fluorescent lighting. [ FLUORESCENT] For recording under warm white, cool white or warm white type (3-wavelength) fluorescent lighting. [ FLUORESCENT H] For recording under daylight or daylight type (3-wavelength) fluorescent lighting.
Still Image Recording Options Still Image Recording Options [ NEUTRAL] Tones down the contrast and color saturation. [ SOFT SKIN DETAIL] Softens the details in the skin tone area for a more complimentary appearance. [ E LOW SHARPENING] Records subjects with softened outlines. [ Still Image Recording Options CUSTOM] Allows you to adjust the brightness, contrast, sharpness, and color depth of the image. [BRIGHTN.
Still Image Recording Options Default value Capturing a Still Image while Recording Movies 2048x1536/FINE L FUNC. ( 23) FUNC. Icon of the currently selected Image Quality/Size While you are recording a movie on the tape you can simultaneously capture the same picture as a still image on the memory card without interrupting your recording to change modes. The size and quality of the still image can be selected. POINTS TO CHECK Desired image size* ( Press FUNC.
Still Image Recording Options NOTES The still image cannot be recorded on the memory card while using the digital zoom or while a digital effect is activated. To record still images we recommend using the mode, which offers the best quality for still images.
Other Functions CONTINUOUS SHOOTING/ HIGH-SPEED CONTINUOUS SHOOTING PHOTO fully and hold it pressed down. A series of still images will be recorded as long as you hold the button pressed down. Other Functions Other Functions 3 Press AUTO EXPOSURE BRACKETING PHOTO fully. Three still images in different exposures will be recorded on the memory card. 3 Press On-Screen Displays The camcorder keeps a data code containing the date and time and other camera data (shutter speed, exposure, etc.
Other Functions Pixel Count Selecting the Data Code You can select the data code to be displayed when playing back movies. Shadows Options [ DATE], [ TIME] DATE & TIME] Displays both the date and time of the recording. [ E Highlights Default value Displays the date or time when the scene or still image was recorded. [ 51 NOTES If you turn all displays on with DISP.
Other Functions Mini Video Light You can turn on the mini video light (assist lamp) at any time regardless of the recording program. ( 1 Press 2 (flash button). • Repeatedly pressing will cycle between the flash modes. • The icon of the selected flash mode will appear ( disappears after 4 seconds). Press PHOTO , first halfway to activate the autofocus and then fully to record the still image. NOTES The practical range of the flash is approx. 1 to 2 m (3.3 to 6.6 ft.).
Other Functions : 2 Press PHOTO , first halfway to activate the autofocus and then fully to record the still image. The camcorder will record the still image after a 10-second countdown (2 seconds when using the wireless controller). The countdown appears on the screen. NOTES ( 23) Setting Icon of the currently selected Digital Effect FUNC. FADER or EFFECT ** Desired fader/effect.* * You can preview the effect on the screen before pressing SET . ** The icon of the selected effect appears.
Other Functions TO FADE OUT Press D.EFFECTS ... : ...while recording, then press Start/Stop to fade out and pause the recording. : ...during playback, then press / to fade out and pause the playback. TO ACTIVATE AN EFFECT Press D.EFFECTS ... : ...while recording or in record pause mode. : ...during playback. : ...and then press PHOTO to record the still image in black and white. NOTES When you are not using the digital effect, select [ D.EFFECT OFF].
Still Image Options 55 Editing Functions Still Image Options Erasing All Images Still Image Options E ( Erasing Still Images 10) MENU IMPORTANT ( Be careful when erasing images. Erased images cannot be recovered. 22) MENU NOTES CARD OPERATIONS ERASE ALL IMAGES Protected images cannot be erased. MENU Erasing a Single Image ( 10) Protecting Still Images FUNC. ( You can protect still images from accidental erasure. 23) FUNC. YES IMAGE ERASE IMPORTANT FUNC.
Still Image Options Protecting a Single Image Just After Recording Initializing the Memory Card You can protect the last recorded still image while reviewing it within the time set for the [REVIEW] option (or immediately after recording it, if [REVIEW] is set to [ OFF]). IMPORTANT Initializing the memory card will erase all still images, even the protected ones. The original still images cannot be recovered. Initialize all memory cards before using them with this camcorder. FUNC.
Connecting to a TV or VCR External Connections 57 Connecting to a TV or VCR Connecting to a TV or VCR E Connection Diagrams Turn off all the devices when making the connections and refer also to the instruction manual of the connected device. AV IN/OUT Terminal COMPONENT OUT Terminal The component video terminal is for video only. When you use connection type 1 do not forget the audio connections using the AV IN/OUT terminal.
Connecting to a TV or VCR High Definition TV Sets (HDTV) Cont. Terminal on the Camcorder Connecting Cable 2 Output connection (Signal Flow Input connection (Signal Flow (IEEE1394) output. Terminal on the Connected Device ) to an HDTV with a DV (IEEE1394) terminal.
Connecting to a TV or VCR 59 Connecting Playback on a TV Screen The quality of the playback picture will vary depending on the connected TV and the type of connection used. ( 10) Change the following settings as necessary before making the connections. Refer to the corresponding explanation of each setting in the PLAY/OUT SETUP menu option list ( 34). - [PLAYBACK STD] to select the output video standard. - [TV TYPE] to match the output video to the aspect ratio of the connected TV. - [COMP.
Connecting to a TV or VCR Connecting Recording to a VCR or Digital Video Recorder You can copy your recordings by connecting the camcorder to a VCR or a digital video device. When recording to a digital video recorder using the HDV/DV terminal, you can copy recordings with virtually no generation loss in video and sound quality. Connect the camcorder to the external device following one of the connection diagrams shown in the previous section Connection Diagrams ( 57).
Connecting to a TV or VCR 6 This camcorder: Stop playback. 1 Load a blank tape in this camcorder. 2 Connected device: Load the E recorded cassette or disc. NOTES We recommend powering the camcorder using the compact power adapter. When recording to a VCR using an analog connection –connection type 3 ( 57)–, the quality of the edited tape will be lower than the original.
Connecting to a TV or VCR Digital Video Dubbing You can input video from other digital video devices and record the input video on the tape in the camcorder. Video input will be recorded on the tape in the same standard of the original (HDV or DV). 5 When the scene you wish to record POINTS TO CHECK ( 10) 6 Set [PLAYBACK STD] to [ AUTO] ( 34) before making the connections.
Connecting to a TV or VCR RESTRICTED” appears and you will not be able to record the contents of the tape. Analog/Digital Conversion Using the camcorder you can convert analog video signals (for example from a VCR) to digital signals (DV standard only) and output them to a digital recording device. Connecting Connect the camcorder to the video input source using an analog connection –connection type 3 ( 57)– shown in the previous section Connection Diagrams.
Connecting to a Computer Connecting to a Computer Connecting to a Computer PC Connection Diagrams USB Terminal Open the rear terminal cover to access. HDV/DV Terminal Check the type and orientation of the terminal and make sure you connect the DV cable properly. Terminal on the Camcorder 1 Output connection (Signal Flow Connecting Cable Terminal on the Connected Device ) to a PC or PictBridge compatible printer with an USB port.
Connecting to a Computer Transferring Video Recordings 3 Connect the camcorder to the You can transfer recordings to a computer using the HDV/DV terminal. Equipment and System Requirements A computer equipped with an IEEE1394 (DV) terminal or an IEEE1394 (DV) capturing board. A DV cable (commercially available). Video Editing Software.
Connecting to a Computer Transferring Still Images – Direct Transfer With the supplied USB cable and Digital Video Software, you can transfer still images to a computer simply by pressing (print/share). Preparations The first time you connect the camcorder to the computer, you need to install the software and set the auto-launch setting. From the second time on, you will only need to connect the camcorder to the computer to transfer images. 1 Install the supplied Digital Video Software.
Connecting to a Computer [ WALLPAPER...] Allows you to select the still image you want to transfer and set it as your computer’s desktop background. 67 NOTES E You can press SET to transfer the images, instead of . With [ ALL IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS], a confirmation message appears. Select [OK] and press SET . When the camcorder is connected to the computer and the image selection screen is displayed, press MENU to return to the transfer menu.
Connecting to a Printer Connecting to a Printer Connecting to a Printer MENU ( 22) MENU Printing Still Images – Direct Print CARD OPERATIONS TRANSFER ORDER MENU ** Bring ( ) the cursor to the image you want to transfer and press SET .* Repeat this step to set transfer orders for additional images. * appears on images marked with a transfer order. Press SET to cancel the transfer order. **After closing the menu the camcorder returns to the index screen.
Connecting to a Printer We recommend powering the camcorder using the compact power adapter. Refer also to the printer’s instruction manual. Printing with the Button (Print/Share) You can print a still image without changing the settings simply by pressing (print/share). - to select the image you wish to print. Press (print/share). • Printing starts. The button flashes and stays on when the printing is completed. • To continue printing, select another still image.
Connecting to a Printer print by selecting 2-, 4-, 9- or [16-UP]. You can also use this setting to print on the specially designed photo stickers sheets. - When the paper size is set to [A4] you can print 4 copies on the same sheet by selecting [4-UP]. Canon PIXMA/SELPHY CP Printers: - When the paper size is set to [CREDITCARD] you can print multiple small copies on a single print by selecting 2-, 4-, or [8-UP]. You can also use [8-UP] to print on the specially designed photo stickers sheets.
Connecting to a Printer The trimming frame appears. 2 Change the size of the trimming frame. • Move the zoom lever toward T to shrink the frame, and toward W to enlarge it. • To cancel the trimming settings, move the zoom lever toward W until the trimming frame disappears. 3 Adjust the trimming frame as NOTES About the color of the trimming frame: - White: No trimming settings. - Green: Recommended trimming size.
Connecting to a Printer Setting Print Orders from the Index Screen ( Printing PRINT 10) Move the zoom lever toward W to enter the still image index screen. MENU ( MENU ( 1 Connect the camcorder to the 22) MENU CARD OPERATIONS PRINT ORDER 2 Bring ( ) the cursor to the image you want to print and press SET . MENU ** Set ( ) the desired number of copies and press SET .* Repeat these steps to set print orders for additional images.
Trouble? 73 Additional Information Trouble? Troubleshooting E If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. • The camcorder switches off by itself. • The cassette compartment cover will not open. • The cassette compartment stopped half way while inserting/removing a tape. • The LCD/viewfinder switches on and off. Battery pack is exhausted.
Trouble? Problem Solution Video noise appears on screen. When using the camcorder in a room where a plasma TV is located, keep a distance between the camcorder and the plasma TV. – Video noise appears on the TV screen. When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. – The tape stops during record pause or playback pause.
Trouble? Problem 75 Solution No sound from the built-in speaker. Open the LCD panel. – Speaker volume is turned off. Adjust the volume with the SET dial. 27 When playing back a tape recorded in HDV standard the playback is jerky or the sound stutters on and off. Video heads are dirty. Clean the video heads. 82 Image will not appear on the TV screen. Set [AV 33 DV] to [OFF]. Check again that the camcorder is properly connected to the TV.
Trouble? Printing Problem Solution Disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection. The printer is not operating even though the camcorder and printer are correctly connected. – Editing Problem Solution Set [AV Cannot record with this camcorder video input from an external video device connected to the HDV/TV terminal using a DV cable. DV] to [OFF]. 33 Wrong signal standard.
Trouble? Message 77 Explanation/Solution You attempted to play back a tape recorded in a different television system (PAL or SECAM) or in a recording standard not supported by this camcorder. – INPUT SIGNAL NOT SUPPORTED The digital device connected with the DV cable is incompatible with the camcorder. – PLAYBACK STD LOCKED INCOMPATIBLE VIDEO INPUT Current camcorder settings do not match the HDV/DV standard of the video input signal.
Trouble? Direct Print Related Messages NOTES About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual. Message Explanation/Solution PAPER ERROR There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print. NO PAPER Paper is not correctly inserted or there is no paper.
Do’s and Don’ts 79 Do’s and Don’ts Handling Precautions Camcorder E DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop or knock it. • Do not get it wet. Charged battery packs continue to discharge naturally.
Do’s and Don’ts Replace the battery pack if the usable time after full charge diminishes substantially at normal temperatures. About the battery terminal cover The battery terminal cover has a [ ]shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs. Back side of the battery pack With cassettes equipped with a memory function, metal plated terminals may become dirty with use.
Do’s and Don’ts the slot if it is not correctly oriented may damage the memory card or the camcorder. Do not attach any labels or stickers on the memory card. When you erase image files or initialize the memory card, only the file allocation table is altered and the data itself is not actually deleted. Take the necessary precautions when you dispose of the memory card, for example by physically damaging it to prevent the leakage of private data.
Do’s and Don’ts Maintenance/Others Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper. Cleaning the Video Heads LCD Screen and I.AF sensor In the following cases the video heads are dirty and need to be cleaned. - The message “HEADS DIRTY, USE CLEANING CASSETTE” appears. - During playback you notice frequent video problems (blocky video artifacts, banding, etc.).
Do’s and Don’ts When the camcorder is moved from a cold place to a warm room 83 RESUMING USE The precise time required for water droplets to evaporate will vary depending on the location and weather conditions. After the condensation warning stops flashing, wait for 1 more hour before resuming use.
General Information General Information System Diagram (Availability differs from area to area) WS-20 Wrist Strap BP-310, BP-315 Battery Pack CG-300 Battery Charger SS600/SS650 Shoulder Strap BP-310, BP-315 Battery Pack MiniDV Video cassette CA-570 Compact Power Adapter WL-D87 Wireless Controller WD-H37C Wide Converter STV-250N Stereo Video Cable VCR DTC-100 D Terminal Cable TL-H37 Tele Converter TV/HDTV CTC-100 Component Cable DV Cable miniSD Card Adapter FS-H37U Filter Set miniSD Card Car
General Information 85 Optional Accessories E Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-8284040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
General Information WD-H37C Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. • When the Wide-converter is attached, a shadow may appear in the picture when you record with flash or assist lamp. FS-H37U Filter Set Neutral density and MC protector filters help you to control difficult lighting conditions. Shoulder Strap You can attach a shoulder strap for more security and portability.
General Information 87 E This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
General Information Specifications HV10 System Video Recording System Audio Recording System Television System Image Sensor Compatible Tapes Tape Speed Maximum Recording Time (60 min.
General Information 89 * This camcorder has been tested with miniSD cards up to 1 GB. Performance cannot be guaranteed for all miniSD cards. ** This camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the camcorder’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
General Information Index 16:9 aspect ratio . . . . . . . . . . . . . . . . . . 32 6-second auto date . . . . . . . . . . . . . . . . 36 9 Point AiAF . . . . . . . . . . . . . . . . . . . . . 44 Direct transfer . . . . . . . . . . . . . . . . . . . .66 Drive mode . . . . . . . . . . . . . . . . . . . . . .49 DV audio mode . . . . . . . . . . . . . . . . . . .33 DV recording mode . . . . . . . . . . . . . . . .32 E A Abroad, using the camcorder . . . . . . . . 83 AEB - Auto exposure bracketing . . . .
General Information Memory card . . . . . . . . . . . . . . . . . 20, 80 MENU . . . . . . . . . . . . . . . . . . . . . . . 22, 31 Mini video light . . . . . . . . . . . . . . . . . . . 52 miniSD card . . . . . . . . . . . . . . . . . . . . . 20 Mix balance . . . . . . . . . . . . . . . . . . . . . 35 Mode switch . . . . . . . . . . . . . . . . . . . . . 40 N ND filter . . . . . . . . . . . . . . . . . . . . . . . . 86 Night (SCN) . . . . . . . . . . . . . . . . . . . . . 40 Normal TV (4:3) . . . . . . .
U.S.A. CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment purchased in the United States. The limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
CANADA E CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
&$121 ,1& 8 6 $ &$121 8 6 $ ,1& 1(: -(56(< 2)),&( -DPHVEXUJ 5RDG -DPHVEXUJ 1- 86$ &$121 8 6 $ ,1& &+,&$*2 2)),&( 3DUN %OYG ,WDVFD ,/ 86$ &$121 8 6 $ ,1& /26 $1*(/(6 2)),&( $OWRQ 3DUNZD\ ,UYLQH &$ 86$ &$121 8 6 $ ,1& +212/8/8 2)),&( :DUG $YHQXH 6XLWH +RQROXOX +O 86$ Q ,I \RX KDYH DQ\ TXHVWLRQV FDOO WKH &DQRQ 8 6 $ ,QIRUPDWLRQ &HQWHU WROO IUHH DW 8 6 $ RQO\ &$1$'$ &$121 &$1$'$ ,1& 1$7,21$/ +($'48$57(56 'L[LH