Operation Manual

The Printing Position Is Skewed
A Portion of the Page Is Not Printed
Data Is Reduced and Printed
The Next Page Is Printed from Halfway across the Previous Page
Others
Blank Paper Is Output (Nothing Is Printed on the Paper)
The Overall Surface of the Paper Is Printed in a Particular Color
The Printout Is Different from What Is Displayed on Screen
The Flap of the Printed Envelope Sticks
Multiple Sheets of Paper Are Fed at a Time
Printed Transparencies or Coated Paper Are Stuck Each Other or Printed Images Are Peeled Off
Poor Print Quality Is Always Occurs at a Particular Position (the Same Position) on Paper
NOTE
Contacting your local authorized Canon dealer
If a problem that is not indicated in the e-Manual occurs, if none of the suggested measures solve the problem, or if you
cannot determine the problem, contact your local authorized Canon dealer.
When using the printer in a certain environment
If you use the printer in a certain environment or print certain paper, the data may not be printed properly or result in
deterioration in print quality.
To solve such problems, a service engineer may specify the print settings according to the operating environment or the
paper.
The settings specified by the service engineer are registered in [Service Settings] in [Special Print Mode] in the printer
driver. Print with [Service Settings] specified, following the instructions of the service engineer.
㻞㻥㻟㻌㻛㻌㻟㻠㻟