㻝㻌㻛㻌㻟㻟㻤
Belangrijke veiligheidsinstructies Installatie Elektrische aansluiting Hantering Onderhoud en inspecties Verbruiksartikelen Basishandelingen Onderdelen en de bijbehorende functies Voorzijde Achterzijde Binnenzijde Sleuf voor handmatige invoer Papierlade Bedieningspaneel Display Het bedieningspaneel gebruiken Tekst invoeren Documenten plaatsen Papier plaatsen Papier in de papierlade plaatsen Papier laden in de sleuf voor handmatige invoer Enveloppen plaatsen Voorbedrukt papier plaatsen Het type en formaat pa
Meerdere pagina's op één vel afdrukken 79 Posters afdrukken 80 Randen afdrukken 81 Datums en paginanummers afdrukken 82 Afdrukken met watermerk 83 Documenttype selecteren 85 Toner besparen 86 Meerdere documenten combineren en afdrukken 87 De gewenste afdrukinstellingen configureren 90 Combinaties van veelgebruikte afdrukinstellingen opslaan 91 De standaardinstellingen wijzigen 93 AirPrint gebruiken (MF212w) 94 Afdrukgegevens voor Apple-apparaten coderen met TLS 99 Instellingen configureren voor sleutelparen
Een wachttijd instellen voor verbinding met een netwerk DNS configureren De machine bewaken en bedienen met SNMP Beveiliging De machine beschermen tegen ongeoorloofde toegang De pincode van de systeembeheerder instellen Communicatie beperken door firewalls in te stellen (MF212w) IP-adressen opgeven voor firewallregels MAC-adressen opgeven voor firewallregels Poortnummers wijzigen(MF212w) Een proxy instellen (MF212w) De functies van de machine beperken (MF212w) HTTP-communicatie uitschakelen De UI op afstand
Voordat u de tonercartridge vervangt Tonercartridges vervangen De machine verplaatsen Aantal afdrukken weergeven Instellingen terugzetten op de standaardwaarden Menu initialiseren Instellingen voor systeembeheer initialiseren Alle gegevens/instellingen initialiseren Bijlage Handige functies Milieubesparing levert geld op Efficiënter werken Digitaal is beter Ongekende mogelijkheden Technische specificaties Apparaatspecificaties Specificaties draadloos LAN (MF212w) Documenttype Scangebied Papier Specificaties
0R11-000 Belangrijke veiligheidsinstructies De informatie in dit hoofdstuk is bedoeld om beschadiging van eigendommen te voorkomen, evenals lichamelijk letsel van gebruikers van het apparaat en anderen in de buurt van het apparaat. Lees deze informatie zorgvuldig door voordat u het apparaat gaat gebruiken en volg de instructies om het apparaat op de juiste manier te gebruiken. U mag alleen handelingen uitvoeren die in deze handleiding worden beschreven.
0R11-001 Installatie U kunt dit apparaat alleen veilig en prettig gebruiken als u de volgende voorschriften volgt en het apparaat op een geschikte locatie installeert. (In deze handleiding worden de aanduidingen "apparaat" en "machine" door elkaar gebruikt om naar het product te verwijzen.
Voorkom slecht geventileerde locaties Dit apparaat genereert bij normaal gebruik een hele kleine hoeveelheid ozon, enzovoort. Hoewel de gevoeligheid voor ozon, enzovoort kan variëren, zijn deze hoeveelheden niet schadelijk. De aanwezigheid van ozon, enzovoort kan beter merkbaar zijn bij langer gebruik of tijdens lange productieruns, met name in slecht geventileerde ruimtes.
0R11-002 Elektrische aansluiting Dit apparaat kan worden gebruikt met een spanning tussen 220-240 V, en een elektrische frequentie van 50/60 Hz. Gebruik alleen een voeding die voldoet aan de aangegeven spanningsvereisten. Als u dat niet doet, kan dit brand of een elektrische schok tot gevolg hebben. Gebruik uitsluitend het netsnoer dat bij het apparaat is geleverd, om brand of een elektrische schok te voorkomen.
0R11-003 Hantering Haal direct de stekker uit het stopcontact en neem contact op met een erkend Canondealer als het apparaat vreemde geluiden maakt, rook of een vreemde geur verspreidt of extreem heet wordt. Als u het apparaat onder die omstandigheden blijft gebruiken, kan dit brand of een elektrische schok tot gevolg hebben. Het is niet toegestaan het apparaat te demonteren of aan te passen.
Informatie over de laserdiode golflengte: 785-800 nm maximaal vermogen: 6 mW Bij het transporteren van het apparaat Voer de volgende stappen uit om te voorkomen dat het apparaat tijdens het vervoer wordt beschadigd. Verwijder de tonercartridges. Gebruik de originele doos met verpakkingsmaterialen om het apparaat goed in te pakken. Overige voorzorgsmaatregelen Volg de instructies die staan vermeld op het waarschuwingsetiket dat op het apparaat is bevestigd.
0R11-004 Onderhoud en inspecties Reinig het apparaat regelmatig. Als er sprake is van stofvorming, werkt de machine mogelijk niet goed. Let op de volgende punten als u Problemen oplossen als er tijdens gebruik een probleem optreedt. Zie Wanneer een probleem de machine gaat reinigen. Zie niet kan worden opgelost als u het probleem niet kunt oplossen of wanneer u van mening bent dat de machine moet worden geïnspecteerd. Schakel het apparaat uit en haal de stekker uit het stopcontact voordat u gaat reinigen.
0R11-005 Verbruiksartikelen Gooi lege tonercartridges niet in open vuur. Bewaar tonercartridges of papier niet op een plek die wordt blootgesteld aan open vuur. Hierdoor kan de toner ontbranden, met brandwonden of brand als gevolg. Als u per ongeluk toner morst, veeg het tonerpoeder dan op met een zachte, vochtige doek zonder het in te ademen. Gebruik nooit een stofzuiger zonder bescherming tegen stofexplosies om de gemorste toner op te ruimen.
Verwijder de tonercartridge niet onnodig uit het apparaat of uit de verpakking. De tonercartridge is een magnetisch product. Houd de cartridge uit de buurt van floppy's, schijfstations en andere apparaten die kunnen worden aangetast door magnetische velden. Als u dat niet doet, bestaat de kans op gegevensverlies. Tonercartridge bewaren Bewaar tonercartridges onder de volgende omstandigheden om een veilige werking en een goed resultaat te garanderen.
0R11-006 Basishandelingen In dit hoofdstuk worden de basishandelingen beschreven, zoals het gebruiken van het bedieningspaneel of het plaatsen van het papier en de documenten. Het gaat hier om handelingen die vaak worden uitgevoerd om de functies van het apparaat te gebruiken. Onderdelen en de bijbehorende functies In dit gedeelte wordt aandacht besteed aan de externe en interne onderdelen van het apparaat en hun functie.
In dit gedeelte wordt beschreven hoe u de slaapstand instelt. De slaapstand instellen De automatische uitschakeltijd instellen In dit gedeelte wordt beschreven hoe u de instelling kunt inschakelen.
0R11-007 Onderdelen en de bijbehorende functies In dit gedeelte worden de onderdelen van de machine beschreven (buitenzijde, voorzijde, achterzijde en binnenzijde), evenals de functie die ze hebben. Naast de onderdelen van de machine die nodig zijn voor het uitvoeren van basishandelingen zoals het plaatsen van documenten, het laden van papier en het vervangen van tonercartridges, wordt hier ook aandacht besteed aan de toetsen op het bedieningspaneel en het display.
0R11-008 Voorzijde Deksel van glasplaat Open dit deksel om documenten op de glasplaat te plaatsen. Documenten plaatsen Bedieningspaneel Het bedieningspaneel bevat toetsen zoals de numerieke toetsen en de [Start]-toets, een display en statuslampjes. U kunt hier alle bewerkingen uitvoeren en instellingen opgeven. U kunt het omhoog of omlaag zetten, zodat het makkelijker te bedienen Bedieningspaneel Display is. Uitvoerlade Afdrukken worden uitgevoerd via de uitvoerlade.
0R11-009 Achterzijde Etiket stroomverbruik Dit etiket vermeldt onder andere het serienummer. Dit nummer hebt u nodig als u vragen of problemen hebt. probleem niet kan worden opgelost Wanneer een USB-poort Hier kunt u een USB-kabel aansluiten om de machine te verbinden met een computer. Raadpleeg "Aan de slag" voor verbindingsinstructies. Meegeleverde documentatie LAN-poort (MF212w) Hier kunt u een LAN-kabel aansluiten om de machine te verbinden met een bekabelde LAN-router, etc.
0R11-00A Binnenzijde Bedieningspaneel Open dit paneel wanneer u de tonercartridges vervangt of papierstoringen verhelpt. Papierstoringen verhelpen vervangen Tonercartridges Tonerklep Open deze klep wanneer u de tonercartridges vervangt of papierstoringen verhelpt. Papierstoringen verhelpen vervangen Papieruitvoergeleider Open deze klep als u papierstoringen wilt verhelpen.
0R11-00C Sleuf voor handmatige invoer Klep van sleuf voor handmatige invoer Open deze klep om papier in de sleuf voor handmatige invoer te plaatsen. Papiergeleiders Stel de papiergeleiders exact af op de breedte van het geladen papier, zodat het papier mooi recht in de machine wordt gevoerd.
0R11-00E Papierlade Stofklep Open deze klep om papier in de papierlade te plaatsen. Papiergeleiders Stel de papiergeleiders exact af op de grootte van het geladen papier, zodat het papier mooi recht in het apparaat wordt gevoerd.
0R11-00F Bedieningspaneel MF212w MF211 [Menu]-toets Druk hierop als u vele instellingen wilt gaan opgeven, zoals of . menuopties Overzicht van [COPY/SCAN]-toets Druk op deze toets om over te schakelen naar de modus voor kopiëren of scannen. [ID-kaart kopie]-toets Als u hierop drukt, wordt een modus geactiveerd waarin u de voor- en achterkant van een rijbewijs of andere identiteitskaart op ware grootte op dezelfde zijde van een vel papier kunt kopiëren.
Druk tijdens het opgeven van instellingen op deze toets om naar het volgende scherm te gaan. Druk tijdens het invoeren van tekst op deze toets om de cursor naar rechts te verplaatsen. Druk op de toets om de waarde voor een instelling te verhogen, zoals de dichtheid voor scannen, kopiëren, enzovoort. [ ]-toets Druk tijdens het opgeven van instellingen op deze toets om het item onder het geselecteerde item te kiezen.
[Menu]-toets Druk hierop als u vele instellingen wilt gaan opgeven, zoals of . menuopties Overzicht van [COPY/SCAN]-toets Druk op deze toets om over te schakelen naar de modus voor kopiëren of scannen. [ID-kaart kopie]-toets Als u hierop drukt, wordt een modus geactiveerd waarin u de voor- en achterkant van een rijbewijs of andere identiteitskaart op ware grootte op dezelfde zijde van een vel papier kunt kopiëren.
Druk op deze toets om terug te keren naar het vorige scherm. Als u deze toets bijvoorbeeld indrukt tijdens het opgeven van instellingen, worden de instellingen niet opgeslagen en keert u terug naar het vorige scherm. [OK]-toets Druk hierop om de gekozen instellingen of opgegeven gegevens te bevestigen. [Statusmonitor]-toets Druk op deze toets om de status van een afdruk- of kopieerbewerking te controleren, of om de gebruiksgeschiedenis te bekijken.
0R11-00H Display Op het display worden schermen weergegeven voor kopiëren, scannen en andere functies, plus de schermen voor het opgeven van instellingen voor deze functies. U kunt het display ook gebruiken om foutberichten en de communicatiestatus van het apparaat te bekijken. Hoofdscherm Wanneer u op (COPY/SCAN) drukt, verschijnt het hoofdscherm voor de geselecteerde functie. Hieronder ziet u bijvoorbeeld het hoofdscherm van de kopieerfunctie.
Hiermee kunt u gegevens bekijken van fouten die zijn opgetreden. Er wordt een foutbericht weergegeven Hiermee kunt u de status van de machine weergeven, zoals de resterende hoeveelheid papier of toner. Druk hierop om informatie weer te geven over de verschillende papierbronnen. Hiermee wordt de resterende hoeveelheid toner aangegeven.
Er treedt een fout op Als er een fout optreedt, worden er soms instructies weergegeven voor het oplossen van de fout. Volg in dat geval de aanwijzingen op het scherm om het probleem op te lossen. Hieronder ziet u bijvoorbeeld het scherm dat verschijnt als er papier is vastgelopen ( Er wordt een foutbericht weergegeven).
0R11-00J Het bedieningspaneel gebruiken Gebruik de onderstaande toetsen om instellingen op te geven en waarden aan te passen. De toetsen / Door het scherm bladeren Aan de rechterkant van het scherm ziet u een schuifbalk als niet alle informatie op één scherm past. Als de schuifbalk wordt / om omhoog en omlaag te bladeren. De tekst- en achtergrondkleuren van een item worden weergegeven, gebruikt u omgekeerd wanneer u deze toetsen selecteert.
gebruiken Druk op om een instelling toe te passen. Met behulp van de numerieke toetsen Gebruik de numerieke toetsen voor het invoeren van tekst en cijfers.
0R11-00K Tekst invoeren Gebruik de numerieke toetsen om tekst en waarden in te voeren. Een ander type tekst kiezen Druk op om te schakelen tussen het type tekst dat wordt ingevoerd. Het geselecteerde type tekst wordt aangegeven door "aA" of "12" bij . U kunt ook selecteren en op drukken om het type tekst te wijzigen. Typen tekst die u kunt invoeren In de onderstaande tabel ziet u welke tekst u kunt invoeren met de numerieke toetsen en Toets . aA 12 @.
Als u een scherm voor het selecteren van symbolen wilt weergeven wanneer de invoermodus aA actief is, drukt u op , of . Gebruik de toetsen / / / om het in te voeren symbool te selecteren en selecteert u en drukt u op . druk op Tekst wissen Telkens als u op drukt, wordt er één teken gewist. U kunt alle ingevoerde tekst wissen door langer ingedrukt te houden. De cursor verplaatsen (een spatie invoeren) Druk op of . drukt u op om de cursor te verplaatsen.
0R11-00L Documenten plaatsen Plaats documenten op de glasplaat. Raadpleeg Documenttype of Scangebied voor informatie over de soorten documenten die u op de glasplaat kunt plaatsen en voor informatie over het scanbare gebied van een document. Gebruik documenten die helemaal droog zijn Als u documenten gaat plaatsen, zorg er dan voor dat eventuele lijm, inkt of correctievloeistof op de documenten goed is opgedroogd. 1 Open de klep van de glasplaat.
0R11-00R Papier plaatsen U kunt het papier plaatsen in de papierlade of in de sleuf voor handmatige invoer. Gebruik de papierlade voor het laden van de papiersoort die u het meest gebruikt. De papierlade is handig wanneer u grote hoeveelheden papier gebruikt. Gebruik de sleuf voor handmatige invoer wanneer u tijdelijk een formaat of type papier wilt gebruiken dat niet in de papierlade is geplaatst. Raadpleeg Papier voor beschikbare papierformaten.
Bewaar het papier niet op een manier waardoor het kan krullen of vouwen. Bewaar het papier niet verticaal of plaatst niet te veel papier opeen. Bewaar het papier niet in direct zonlicht, op een plaats die onderhevig is aan hoge vochtigheid of droogte of op een plaats met grote verschillen in temperatuur of luchtvochtigheid.
0R11-00S Papier in de papierlade plaatsen Gebruik de papierlade voor het papier dat u het meest gebruikt. Wanneer u wilt afdrukken op papier dat niet beschikbaar is in de Papier laden in de sleuf voor handmatige invoer papierlade, legt u het papier in de sleuf voor handmatige invoer. Plaats het papier met de korte zijde naar voren U kunt papier niet laden met de lange zijde naar voren. Plaats het papier met de korte zijde naar voren. 1 Open de stofkap.
Zorg dat de stapel de markering voor het maximale aantal vellen niet overschrijdt bij het plaatsen van papier Zorg ervoor dat de papierstapel niet hoger is dan de markering voor het maximale aantal vellen ( kan dit papierstoringen veroorzaken. Zie 4 Enveloppen plaatsen of ). Als u te veel papier plaatst, Voorbedrukt papier plaatsen als u enveloppen gaat laden of papier met een logo. Schuif de papiergeleiders tegen de randen van het papier. Stel de papiergeleiders in op de breedte van het papier.
Afdrukken op de achterzijde van bedrukt papier (handmatig dubbelzijdig afdrukken) U kunt afdrukken op de achterzijde van bedrukt papier. Strijk het bedrukte papier glad en leg het in de sleuf voor handmatige invoer ( Papier laden in de sleuf voor handmatige invoer), met de bedrukte zijde naar beneden. Plaats één vel tegelijk per afdruk. U kunt alleen papier gebruiken dat met dit apparaat is bedrukt. U kunt niet afdrukken op de zijde die eerder is bedrukt.
0R11-00U Papier laden in de sleuf voor handmatige invoer Wanneer u wilt afdrukken op papier dat niet beschikbaar is in de papierlade, legt u het papier in de sleuf voor handmatige invoer. Papier in de papierlade plaatsen Gebruik de papierlade voor het papier dat u het meest gebruikt. Plaats het papier met de korte zijde naar voren U kunt papier niet laden met de lange zijde naar voren. Plaats het papier met de korte zijde naar voren. 1 Open de klep van de sleuf voor handmatige invoer.
Schuif de papiergeleiders stevig tegen de randen van het papier Als de papiergeleiders te los of te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan. 5 Trek de papierstop uit.
0R11-00W Enveloppen plaatsen Strijk de enveloppen glad voordat u ze gaat laden. Let ook op de invoerrichting van de enveloppen en welke kant naar boven wijst. Voordat u enveloppen gaat laden Plaatsingsrichting In dit gedeelte wordt uitgelegd hoe u enveloppen in de gewenste richting laadt. Daarnaast worden de stappen besproken die u Papier in de papierlade plaatsen of Papier laden in de sleuf moet uitvoeren voordat u enveloppen gaat laden.
Plaatsingsrichting Plaats de enveloppen met de korte zijde naar voren en met de kant zonder lijm (de voorzijde) naar boven. De richting waarin u enveloppen plaatst, is hetzelfde voor de papierlade en de sleuf voor handmatige invoer. Plaats de enveloppen met de sluitklep aan de linkerkant.
0R11-00X Voorbedrukt papier plaatsen Als u papier gebruikt waarop vooraf een logo is afgedrukt, let u bij het plaatsen op de invoerrichting van het papier. Zorg dat het papier goed is geplaatst zodat er op de juiste kant van het papier met een logo wordt afgedrukt.
0R11-00Y Het type en formaat papier opgeven U moet ervoor zorgen dat de instellingen voor het type en formaat papier overeenkomen met het papier dat is geladen. Vergeet dus niet de papierinstellingen aan te passen wanneer u papier gaat laden dat afwijkt van het eerder gebruikte papier. Als de instellingen onjuist zijn, kan het papier vastlopen of kan er een afdrukfout optreden. 1 2 3 Druk op Druk op (Papierinstellingen).
3 Selecteer of en druk op 4 Selecteer een veelgebruikt papierformaat en druk op schakelen. . om het corresponderende selectievakje in te Niet-ingeschakelde papierformaten worden weergeven op het scherm . 5 Selecteer en druk op .
0R11-010 Een aangepast papierformaat registreren Zowel voor de papierlade als voor de sleuf voor handmatige invoer kunt u één veelgebruikt aangepast papierformaat registreren. 1 2 Druk op Druk op (Papierinstellingen). / om of te selecteren en druk vervolgens op 3 Selecteer en druk op 4 Geef het papierformaat op. 1 . Geef de lengte van de zijde op (de korte zijde). Selecteer en druk op .
KOPPELINGEN Papier in de papierlade plaatsen Papier laden in de sleuf voor handmatige invoer 㻠㻤㻌㻛㻌㻟㻟㻤
0R11-011 De stille modus inschakelen In de stille modus maakt het apparaat tijdens gebruik minder geluid. Druk bijvoorbeeld op op het bedieningspaneel wanneer u het apparaat's nachts gebruikt. Dit is alles wat u hoeft te doen om het apparaat stiller te laten werken. U kunt ook de tijd opgeven waarop het apparaat automatisch in de stille modus moet worden gezet. In de stille modus Het lampje brandt groen als de stille modus actief is.
De stille modus uitschakelen Druk op om de stille modus uit te schakelen.
0R11-012 De slaapstand instellen In de slaapstand wordt het stroomverbruik verlaagd door de stroomtoevoer naar het bedieningspaneel te onderbreken. Als er gedurende op bepaalde tijd geen bewerkingen worden uitgevoerd op de machine, zoals tijdens de lunchpauze, kunt u energie besparen door op het bedieningspaneel te drukken. U kunt ook de instelling Automatische sluimertijd gebruiken om de machine automatisch in de slaapstand te zetten als deze gedurende de opgegeven tijd inactief is.
0R11-013 De automatische uitschakeltijd instellen Door deze instelling in te schakelen, kunt u de machine zodanig instellen dat deze automatisch wordt uitgezet. De machine wordt automatisch uitgeschakeld zodra de opgegeven periode van inactiviteit is verstreken sinds het activeren van de slaapstand. U kunt instellen dat de stroomtoevoer automatisch wordt uitgeschakeld als u vergeet het apparaat uit te schakelen, bijvoorbeeld's nachts of in vakanties.
0R11-014 Kopiëren In dit hoofdstuk wordt aandacht besteed aan basisbewerkingen voor kopiëren en worden verschillende andere handige functies beschreven, zoals het kopiëren van meerdere pagina's op één vel papier.
0R11-015 Basisbewerkingen voor kopiëren 1 Plaats één of meer documenten. 2 Druk op 3 Gebruik de numerieke toetsen om het gewenste aantal kopieën in te voeren. Documenten plaatsen (COPY/SCAN) om over te schakelen naar het scherm voor de kopieermodus. U kunt een waarde invoeren van 1 tot 99. Druk op 4 5 om het ingevoerde aantal te annuleren. Geef de gewenste kopieerinstellingen op. Gebruik / Druk op . om de instellingen te selecteren.
Wanneer het bericht wordt weergegeven. Er wordt een foutbericht weergegeven Als u documenten gaat kopiëren met tekst of afbeeldingen die doorlopen tot de randen van de pagina De kans bestaat dat de randen van het document niet worden gekopieerd. Zie scanmarges.
0R11-016 Kopiëren annuleren Als u de kopieerbewerking wilt annuleren direct nadat u op hebt gedrukt, selecteert u of drukt u op bedieningspaneel. U kunt het kopiëren ook annuleren nadat u de kopieerstatus hebt gecontroleerd. op het Annuleren op het scherm dat wordt weergegeven tijdens het kopiëren Druk op om te annuleren Als op het scherm een lijst met documenten verschijnt wanneer u op hebt gedrukt De documenten zijn gescand en wachten om te worden afgedrukt.
Hiermee annuleert u het kopiëren. Kopieerdetails Hier ziet u het aantal kopieën, de gekozen instellingen en andere details. Als u alleen de details wilt controleren zonder het kopiëren te annuleren, drukt u op om terug te gaan naar het hoofdscherm van de kopieerfunctie.
0R11-017 Verschillende kopieerinstellingen U kunt kiezen uit een groot aantal instellingen om zo op de gewenste manier kopieën te maken. Zo zijn er instellingen om papier te besparen maar ook om uw documenten beter leesbaar te maken.
0R11-018 Vergroten of verkleinen U kunt kopieën vergroten of verkleinen door een vooraf ingesteld zoompercentage te gebruiken zoals A4> of door in stappen van 1% een aangepast zoompercentage in te stellen. (COPY/SCAN) selecteer het zoompercentage Druk op / of de numerieke toetsen om het zoompercentage in te voeren en druk vervolgens op 1% een zoompercentage instellen tussen 25 en 400%. Vooraf ingesteld zoompercentage Selecteer een zoompercentage.
0R11-019 Documenttype selecteren U kunt de optische beeldkwaliteit voor de kopie selecteren op basis van het documenttype, zoals documenten met alleen tekst, documenten met grafieken en tabellen of documenten met tijdschriftfoto's. (COPY/SCAN) selecteer het documenttype Selecteer deze optie voor het kopiëren van documenten met alleen tekst. Selecteer deze optie als u documenten gaat kopiëren die tekst en foto's bevatten.
0R11-01A Dichtheid aanpassen U kunt de dichtheid van de kopie aanpassen als de tekst of afbeeldingen in een document te licht of te donker zijn. U kunt ook automatisch een optimale dichtheid voor een document laten instellen. (COPY/SCAN) wijzig de dichtheid Er wordt automatisch een optimale dichtheid voor het document ingesteld. wordt automatisch ingesteld op . ( Documenttype selecteren) Wijzig de dichtheid met / .
0R11-01C Scherpte aanpassen U kunt de scherpte van de gekopieerde afbeelding aanpassen. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren. (COPY/SCAN) pas de beeldscherpte aan <->: Druk op Hiermee verlaagt u de scherpte, waardoor het beeld minder hard is. Voorbeeld: Als u de weergave van foto's uit een tijdschrift wilt verbeteren <+>: Druk op Hiermee verhoogt u de scherpte van de afbeelding.
0R11-01E Meerdere documenten op één vel kopiëren (2 op 1/4 op 1) U kunt twee of vier documenten verkleind kopiëren op één vel papier. Hierdoor neemt het aantal pagina's af en kunt u eenvoudig papier besparen. Als u <2 op 1>/<4 op 1> gebruikt, wordt de kopieerverhouding automatisch verkleind (de kopieerverhouding wordt drukt, maar de weergegeven op het scherm).
0R11-01F De toets [Paper Save Copy] gebruiken Als u op de toets drukt, wordt de machine in de modus voor papierbesparing gezet. In deze modus worden meerdere documentpagina's op één vel gekopieerd, waardoor u papier bespaart. Als u gebruikt, wordt de kopieerverhouding automatisch verkleind (de kopieerverhouding wordt drukt, maar de weergegeven op het scherm).
0R11-01H Beide zijden van een identiteitsbewijs op één pagina kopiëren Gebruik om de voor- en achterzijde van een identiteitsbewijs op dezelfde zijde van een pagina te kopiëren. Deze functie is handig als u bijvoorbeeld een rijbewijs of paspoort gaat kopiëren. is beschikbaar met papier van het formaat A4/Letter of groter. wordt automatisch ingesteld op <100%>.
0R11-01J Kopieën sorteren per pagina Als u meerdere kopieën wilt gaan maken van documenten met meerdere pagina's, kunt u op zetten om de kopieën op volgorde te sorteren. Deze functie is handig bij het voorbereiden van hand-outs voor vergaderingen of presentaties. (COPY/SCAN) De kopieën worden per pagina gegroepeerd en worden niet gesorteerd.
0R11-01K De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft te configureren als u gaat kopiëren.
0R11-01L De machine als printer gebruiken Er zijn verschillende manieren om de machine als printer te gebruiken. U kunt documenten op uw computer afdrukken via het printerstuurprogramma, of afdrukken vanaf draagbare apparaten met AirPrint. Kies in elke situatie de afdrukfunctie die het best aansluit bij uw wensen. Afdrukken vanaf een computer Een document dat u op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma.
0R11-01R Afdrukken vanaf een computer Documenten die u met een programma op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Het printerstuurprogramma heeft een aantal handige instellingen, zoals vergroten/verkleinen, waarmee u uw documenten op verschillende manieren kunt afdrukken. U kunt de afdrukfunctie van de machine pas gebruiken nadat u enkele procedures hebt doorlopen, zoals het installeren van het printerstuurprogramma op uw computer.
0R11-01S Een document afdrukken In dit gedeelte wordt beschreven hoe u een document op uw computer afdrukt via het printerstuurprogramma. 1 Open een document in een programma en geef het afdrukvenster weer. De manier waarop u het afdrukvenster weergeeft, kan per programma verschillen. Raadpleeg voor meer informatie de Help van het programma dat u gebruikt. 2 Selecteer het printerstuurprogramma voor het apparaat en klik op [Preferences] (Voorkeuren) (of [Properties] (Eigenschappen)).
Klikbare UI Op de voorbeeldafbeelding kunt u gemakkelijk, op intuïtieve wijze, instellingen zoals de paginalay-out en inbindpositie opgeven. Klik voor meer informatie op [Help] in het printerstuurprogramma. 4 Klik op [Afdrukken] (of op [OK]). Het afdrukken wordt gestart. In sommige programma's verschijnt het onderstaande scherm. Als u het afdrukken wilt annuleren, klikt u op [Annuleren] als het bovenstaande scherm wordt weergegeven.
0R11-01U Afdrukken annuleren U kunt het afdrukken annuleren vanaf uw computer of vanaf het bedieningspaneel van de machine. Vanaf een computer Vanaf het bedieningspaneel Vanaf een computer U annuleert het afdrukken vanaf het pictogram van de printer dat wordt weergegeven in het systeemvak van het bureaublad. 1 Dubbelklik op het printerpictogram.
Vanaf het bedieningspaneel Annuleer het afdrukken met Druk op of . om te annuleren Als op het scherm een lijst met documenten verschijnt wanneer u op hebt gedrukt Selecteer het document dat u wilt annuleren. Selecteer de te annuleren taak Druk op om te annuleren selecteer het document op het scherm Het is mogelijk dat er nog enkele pagina's worden uitgevoerd nadat u het afdrukken hebt geannuleerd.
0R11-01W De afdrukstatus controleren U kunt de huidige afdrukstatussen controleren. Handig in de volgende situaties Als het erg lang duurt voordat uw documenten worden afgedrukt, kunt u de wachtrij bekijken met de documenten die nog niet zijn afgedrukt. Als u de afdrukken niet kunt vinden die nu toch echt klaar hadden moeten zijn, kunt u controleren of er een fout is opgetreden. 1 2 3 Druk op .
0R11-01X Verschillende afdrukinstellingen Er zijn verschillende afdrukinstellingen die u kunt kiezen, zoals vergroot/verkleind afdrukken.
0R11-01Y Vergroten of verkleinen U kunt afdrukken vergroten of verkleinen door een vooraf ingesteld zoompercentage voor afdrukken te selecteren, zoals A5 naar A4. U kunt ook zelf een aangepast zoompercentage kiezen, dat u kunt verhogen of verlagen in stappen van 1%.
De instellingen voor vergroten/verkleinen in bepaalde programma's hebben prioriteit boven de desbetreffende instellingen in het printerstuurprogramma.
0R11-020 Afdrukken sorteren per pagina Als u afdrukken wilt maken van documenten met meerdere pagina's, selecteert u [Sorteren] om complete sets op volgorde af te drukken. Deze functie is handig bij het voorbereiden van hand-outs voor vergaderingen of presentaties. tabblad [Algemene instellingen] selecteer [Sorteren] of [Groeperen] bij [Afwerking] [OK] [Afwerking] Geef de sorteermethode van de afdrukken op wanneer u documenten met meerdere pagina's afdrukt.
0R11-021 Meerdere pagina's op één vel afdrukken U kunt meerdere pagina's afdrukken op één vel papier. Zo kunt u vier of negen pagina's afdrukken op één vel door [4 op 1] of [9 op 1] te gebruiken. Gebruik deze functie als u papier wilt besparen of een document wilt bekijken als miniaturen.
0R11-022 Posters afdrukken U kunt één pagina van een document verspreid over meerdere pagina's afdrukken. Als u een document met één pagina van het formaat A4 bijvoorbeeld negen keer zo groot maakt, hebt u een poster van 3x3 vellen A4formaat nadat u het document hebt afgedrukt en de vellen aan elkaar hebt geplakt.
0R11-023 Randen afdrukken U kunt randen, zoals stippellijnen of dubbele ononderbroken lijnen, toevoegen aan de marges van afdrukken. tabblad [Pagina-instelling] klik op [Pagina opties] selecteer het type rand bij [Kader] [Kader] Selecteer hier het type rand. Voorbeeld Hier ziet u een voorbeeld met de geselecteerde rand.
0R11-024 Datums en paginanummers afdrukken U kunt de informatie zoals datums of paginanummers afdrukken. Daarnaast kunt u aangeven waar in het document u deze informatie wilt afdrukken (linksboven, rechtsonder, enzovoort). Tabblad [Pagina-instelling] het paginanummer [OK] klik op [Pagina opties] [OK] selecteer de afdrukpositie van de afdrukdatum, de gebruikersnaam of [Afdrukdatum] Geef de positie aan voor het afdrukken van de afdrukdatum.
0R11-025 Afdrukken met watermerk U kunt een watermerk zoals "KOPIE" of "VERTROUWELIJK" afdrukken over het document. U kunt nieuwe watermerken maken of vooraf geregistreerde watermerken gebruiken. Tabblad [Pagina-instelling] [OK] schakel het selectievakje [Watermerk] in selecteer een watermerk in [Watermerknaam] [Watermerk]/[Watermerknaam] Schakel het selectievakje [Watermerk] in om de beschikbare watermerken weer te geven in de vervolgkeuzelijst [Watermerknaam]. Selecteer een watermerk in de lijst.
Een document afdrukken Randen afdrukken Datums en paginanummers afdrukken 㻤㻠㻌㻛㻌㻟㻟㻤
0R11-026 Documenttype selecteren U kunt het type document opgeven om zo een optimale beeldkwaliteit te garanderen. Er zijn verschillende instellingen voor fotodocumenten, documenten met grafieken en tabellen, en documenten met CADtekeningen met zeer dunne lijntjes. tabblad [Kwaliteit] selecteer het type document bij [Doel] [OK] [Doel] Selecteer een optie die het best past bij het type document of het doel van de afdruk.
0R11-027 Toner besparen U kunt in het printerstuurprogramma instellen dat documenten met minder toner worden afgedrukt. Als de tonerspaarstand is ingeschakeld, bestaat de kans dat dunne lijnen en delen met een lichtere afdrukdichtheid vaag worden.
0R11-028 Meerdere documenten combineren en afdrukken Met behulp van Canon PageComposer kunt u meerdere documenten samenvoegen tot één afdruktaak en de taak afdrukken met de opgegeven afdrukinstellingen. Op deze manier kunt u bijvoorbeeld documenten combineren die met verschillende programma's zijn gemaakt en alle pagina's op hetzelfde papierformaat afdrukken. 1 Open een document in een programma en geef het afdrukvenster weer. De manier waarop u het afdrukvenster weergeeft, kan per programma verschillen.
5 Herhaal stappen 1 - 4 voor de documenten die u wilt combineren. De documenten worden toegevoegd aan Canon PageComposer. 6 Selecteer in de lijst [Document Name] (Documentnaam) de documenten die u wilt combineren en klik op . U selecteert meerdere documenten door op de documenten te klikken terwijl u de toets [Shift] of [Ctrl] ingedrukt houdt. 7 Wijzig de instellingen desgewenst en klik op [Combineren]. De documenten die zijn geselecteerd in stap 6 worden gecombineerd.
[Details] Hiermee geeft u het scherm met afdrukinstellingen van het printerstuurprogramma weer. Er zijn minder instellingen beschikbaar dan bij gewoon afdrukken. 8 Selecteer in de lijst [Document Name] (Documentnaam) de gecombineerde afdruktaak die u wilt afdrukken en klik op . Het afdrukken wordt gestart. Raadpleeg Afdrukken annuleren voor instructies voor het annuleren van het afdrukken.
0R11-029 De gewenste afdrukinstellingen configureren U kunt combinaties van instellingen opslaan als "profielen" om uw diverse afdrukdoelen te realiseren. U kunt de instellingen die u vaak gebruikt, ook opslaan als de standaardinstellingen. Wanneer de standaardinstellingen zijn opgeslagen, worden ze automatisch op het scherm van het printerstuurprogramma weergegeven, zodat u ze niet speciaal hoeft op te geven en meteen kunt beginnen met afdrukken.
0R11-02A Combinaties van veelgebruikte afdrukinstellingen opslaan Als u bij elke afdruktaak instellingen moet opgeven om bijvoorbeeld "af te drukken op A4-papier in de afdrukstand Liggend, met de tonerspaarstand ingeschakeld", wordt dit tijdrovend en vervelend. Als u uw veelgebruikte combinaties van afdrukinstellingen echter opslaat als een "profiel", kunt u de gewenste afdrukinstellingen eenvoudig opgeven door het bijbehorende profiel te selecteren.
De instellingen van het geselecteerde profiel wijzigen U kunt de instellingen van het geselecteerde profiel wijzigen. Desgewenst kunt u de gewijzigde instellingen opslaan als een ander profiel.
0R11-02C De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven als u het scherm met afdrukinstellingen van het printerstuurprogramma opent. U kunt deze instellingen wijzigen in de instellingen die u het meest gebruikt. Als u bijvoorbeeld altijd 2 documentpagina's per vel wilt afdrukken, geeft u [2 op 1] op als de standaardinstelling voor de paginalay-out.
0R11-02E AirPrint gebruiken U hebt niet altijd een computer nodig voor het afdrukken van foto's, e-mails, webpagina's en andere documenten. Met AirPrint kunt u draadloos afdrukken vanaf Apple-apparaten zoals een iPad, iPhone, iPod touch en Macintosh zonder dat u het printerstuurprogramma hoeft te gebruiken.
Aantal kopieën Tik op [+] of [-] rechts van [1 kopie] om het aantal kopieën in te stellen. [Range] (Bereik) Tik op [Range] (Bereik) en [All Pages] (Alle pagina's) of geef het bereik op van de pagina's die u wilt afdrukken als u een document met meerdere pagina's afdrukt. De beschikbare instellingen in [Printer Options] (Printeropties) verschillen afhankelijk van het programma dat u gebruikt. De beschikbare papierformaten verschillen afhankelijk van het programma dat u gebruikt. 6 Tik op [Print] (Druk af).
Annuleren vanaf een iPad, iPhone of iPod touch 1 2 3 Druk tweemaal op de knop [Home]. Tik op [Print Center] (Afdrukcentrum) om de lijst weer te geven met de documenten die moeten worden afgedrukt. Tik op het document dat u wilt annuleren en tik op [Cancel Printing] (Annuleer afdrukken). Annuleren vanaf een Mac 1 2 3 Klik op het printerpictogram dat wordt weergegeven in het Dock op het bureaublad. Klik op het document dat u wilt annuleren. Klik op de knop [Delete] (Verwijder).
4 Klik op [Bewerken...]. 5 Geef de vereiste instellingen op en klik op [OK]. [AirPrint gebruiken] Schakel dit selectievakje in om afdrukken via AirPrint mogelijk te maken. Schakel het selectievakje uit om AirPrint uit te schakelen. [Printernaam]/[Locatie]/[Breedtegraad]/[Lengtegraad] Voer de naam en de installatielocatie in om dit apparaat eenvoudig te herkennen vanaf uw Apple-apparaat. Deze informatie is handig als u meerdere AirPrint-printers gebruikt. [AirPrint-prior.
U kunt het scherm van AirPrint weergeven om toegang te krijgen tot de verschillende AirPrint-instellingen, maar ook om gegevens van verbruiksartikelen te bekijken, zoals papier en toner. 1 2 3 4 Klik op [System Preferences] (Systeemvoorkeuren) in het Dock op het bureaublad (Afdrukken en scannen). [Print & Scan] Selecteer uw printer en klik op [Options & Supplies] (Opties en toebehoren). Klik op [Show Printer Webpage] (Geef webpagina van printer weer).
0R11-02F Afdrukgegevens voor Apple-apparaten coderen met TLS Bevoegde gebruikers kunnen worden benadeeld door aanvallen van kwaadwillende personen, bijvoorbeeld door sniffing, spoofing en het manipuleren van gegevens die over een netwerk worden verzonden. Om uw belangrijke en kostbare gegevens te beschermen tegen deze aanvallen, kunt u AirPrint op deze machine gebruiken om de communicatie tussen de machine en een Apple-apparaat te coderen met TLS (Transport Layer Security).
Details van een certificaat weergeven U kunt de details van het certificaat controleren of het certificaat verifiëren door op de juiste tekstkoppeling onder [Sleutelnaam] Sleutelparen en digitale certificaten verifiëren te klikken of op het pictogram van het certificaat. 6 Schakel TLS in voor de UI op afstand. 1 Klik op [Netwerkinstellingen] 2 Klik op [Bewerken...]. 3 Schakel het selectievakje [Gebruik TLS] in, geef de vereiste instellingen op en klik op [OK]. [AirPrint-beveiligingsinstellingen].
KOPPELINGEN AirPrint gebruiken (MF212w) Sleutelparen genereren Door een CA uitgegeven sleutelparen en digitale certificaten gebruiken 㻝㻜㻝㻌㻛㻌㻟㻟㻤
0R11-02H Instellingen configureren voor sleutelparen en digitale certificaten Om de communicatie te coderen met een extern apparaat, moet vooraf een coderingssleutel worden verzonden en ontvangen via een onbeveiligd netwerk. Dit probleem wordt opgelost door cryptografie met openbare sleutels.
0R11-02J Sleutelparen genereren U kunt een sleutelpaar genereren met de machine als dit nodig is voor gecodeerde communicatie via TLS (Transport Layer Security). U kunt TLS gebruiken wanneer u de machine vanaf een Apple-apparaat oproept om AirPrint te gebruiken. U kunt maximaal drie Netwerkcommunicatiesleutel aanmaken Sleutel en certificaatondertekeningsverzoek sleutelparen opslaan op de machine.
6 Geef instellingen op voor de sleutel en het certificaat. [Sleutelinstellingen] [Sleutelnaam] Gebruik maximaal 24 alfanumerieke tekens voor de naam van het sleutelpaar. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] RSA wordt gebruikt om een sleutelpaar te genereren. Selecteer de sleutellengte in de vervolgkeuzelijst.
Sleutel en certificaatondertekeningsverzoek (CSR) aanmaken 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/registratie]. 3 Klik op [Beveiligingsinstellingen] 4 Klik op [Sleutel aanmaken...]. [Instellingen sleutel en certificaat]. Een sleutelpaar verwijderen Klik op [Verwijderen] bij het sleutelpaar dat u wilt verwijderen klik op [OK]. Bij een sleutelpaar dat op dat moment wordt gebruikt, wordt "TLS" weergegeven.
6 Geef instellingen op voor de sleutel en het certificaat. [Sleutelinstellingen] [Sleutelnaam] Gebruik maximaal 24 alfanumerieke tekens voor de naam van het sleutelpaar. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] RSA wordt gebruikt om een sleutelpaar te genereren. Selecteer de sleutellengte in de vervolgkeuzelijst.
Als er een bevestigingsvenster wordt weergegeven, klikt u op [Opslaan] om het bestand op te slaan. 9 10 Klik op [Certificaat registreren...]. Klik op [Bestand kiezen], geef het bestand voor het certificaatondertekeningsverzoek op en klik op [Registreren].
0R11-02K Door een CA uitgegeven sleutelparen en digitale certificaten gebruiken Sleutelparen en digitale certificaten voor gebruik met het apparaat zijn verkrijgbaar bij een certificeringsinstantie (CA). U kunt deze bestanden opslaan en vervolgens registreren via de UI op afstand. Zorg ervoor dat het sleutelpaar en het certificaat voldoen aan de vereisten van het apparaat ( Vereisten voor sleutels en certificaten). U kunt maximaal drie sleutelparen en drie CA-certificaten opslaan.
De vooraf geïnstalleerde CA-certificaten uit- of inschakelen Klik op [Uitschakelen] naast het vooraf geïnstalleerde CA-certificaat dat u wilt uitschakelen. Als u het certificaat weer wilt inschakelen, klikt u nogmaals op [Inschakelen] naast het certificaat. 5 Klik op [Installeren...]. Een sleutelpaar of CA-certificaat verwijderen Klik op [Verwijderen] naast het bestand dat u wilt verwijderen en klik vervolgens op [OK].
KOPPELINGEN Sleutelparen genereren Sleutelparen en digitale certificaten verifiëren Afdrukgegevens voor Apple-apparaten coderen met TLS 㻝㻝㻜㻌㻛㻌㻟㻟㻤
0R11-02L Sleutelparen en digitale certificaten verifiëren Als u sleutelparen en CA-certificaten hebt geregistreerd, kunt u de gegevens van deze onderdelen bekijken of hun geldigheid en handtekening controleren. 1 2 3 4 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/registratie]. Klik op [Beveiligingsinstellingen] [Instellingen sleutel en certificaat] (voor sleutelparen) of [Instellingen CA-certificaat] (voor CA-certificaten).
Het resultaat van het verifiëren van het certificaat wordt zoals hieronder weergegeven.
0R11-02R De machine als scanner gebruiken U kunt originele documenten scannen door het bedieningspaneel van het apparaat of een programma op een computer te gebruiken. Welke manier u ook gebruikt, de gescande documenten worden geconverteerd naar elektronische bestandsindelingen zoals PDFbestanden. Gebruik de scanfunctie om omvangrijke papieren documenten te converteren naar bestanden zodat u deze gemakkelijk kunt ordenen.
0R11-02S Het gebruik van het apparaat als een scanner voorbereiden Zorg ervoor dat het apparaat en uw computer met elkaar verbonden zijn en dat alle software is geïnstalleerd. Raadpleeg "Aan de slag" voor instructies ( Meegeleverde documentatie). Om verbinding te maken via een draadloze of bekabelde LAN, moet u dit apparaat registreren in MF Network Scan Utility (MF Netwerkscanprogramma). Registreer het apparaat volgens de onderstaande procedure.
0R11-02U Scannen vanaf het apparaat De volgorde van het scannen van een document en het opslaan op een computer kan alleen worden uitgevoerd wanneer vanaf het apparaat wordt gescand. Voer de scan uit terwijl u opgeeft op welke computer de documenten worden opgeslagen, geef op of de documenten in kleur of in zwart-wit worden gescand, of de documenten worden opgeslagen als PDF- of JPEG-bestanden en geef de overige instellingen op. 1 2 3 4 Plaats één of meer documenten.
Instellingen wijzigen U kunt instellingen wijzigen vanaf MF Toolbox. 6 Druk op Scaninstellingen configureren in MF Toolbox . Het scannen wordt gestart. Om te annuleren drukt u op . U kunt niet scannen als het instelscherm van MF Toolbox wordt weergegeven. Sluit het scherm voordat u gaat scannen. 7 Als u extra pagina's van het document wilt scannen, legt u de volgende pagina op de glasplaat en drukt u op . Herhaal deze stap totdat alle pagina's zijn gescand.
0R11-02W Scannen met de toets [Scan -> PC] Plaats een document op het apparaat en druk op of (bij gebruik van de MF211 drukt u op ). Het scannen wordt onmiddellijk gestart. Het type scan (kleur of zwart-wit), de doelmap voor de opslag van het document en andere instellingen kunnen in een knop worden opgeslagen en documenten kunnen worden gescand met deze instellingen. In dit gedeelte wordt beschreven hoe u instellingen kunt opslaan in een knop en hoe u met deze instellingen kunt scannen.
Selecteer deze instelling om opgeslagen instellingen te wissen. Selecteer deze instelling als het apparaat en de computer via USB verbonden zijn. (MF212w) Selecteer deze instelling als het apparaat en de computer via een netwerk verbonden zijn. 6 Selecteer de doelcomputer en druk op . Dit scherm wordt niet weergegeven als u selecteert in stap 5. 7 Selecteer het scantype en druk op Type scan .
De toets [Scan -> PC] gebruiken 1 Plaats één of meer documenten. 2 Druk op of Raadpleeg Documenten plaatsen (bij gebruik van de MF211 drukt u op ). De opgeslagen instellingen controleren om de instellingen die in de toets zijn opgeslagen, te controleren. Het scannen wordt gestart. Om te annuleren drukt u op . U kunt niet scannen als het instelscherm van MF Toolbox wordt weergegeven. Sluit het scherm voordat u gaat scannen.
0R11-02X Scannen vanaf een computer Er zijn twee manieren om te scannen vanaf een computer: met behulp van MF Toolbox en met behulp van een toepassing zoals een beeldbewerkings- of tekstverwerkingsprogramma. Scannen met MF Toolbox MF Toolbox is een programma dat bij het apparaat wordt geleverd en waarmee u documenten of afbeeldingen naar een computer kunt scannen. U kunt de gescande gegevens doorsturen naar een opgegeven programma of deze toevoegen aan een e-mailbericht.
0R11-02Y Scannen met MF Toolbox U kunt gescande documenten opslaan op een computer, ze doorsturen naar een opgegeven programma om ze te bewerken of ze toevoegen aan een e-mailbericht. MF Toolbox bevat voorinstellingen voor alle doeleinden, inclusief het converteren naar PDF en het scannen van kleurendocumenten. U kunt gemakkelijk scannen door een voorinstelling te selecteren. Als
Naar een andere scanner omschakelen Als er twee of meer apparaten geïnstalleerd zijn en u wilt overschakelen naar een ander apparaat, klikt u op [Instellingen] en selecteert u het apparaat. Instellingen voor MF Toolbox en de scanner configureren 4 Configureer de scaninstellingen. 5 Klik op [Starten]. Scaninstellingen configureren in MF Toolbox Het scannen wordt gestart. Klik op [Annuleren] om te annuleren.
Gescande afbeeldingen eerst bekijken en dan pas een bestandsindeling en opslagbestemming opgeven U kunt een voorbeeld van de gescande afbeeldingen weergeven voordat u de bestandsindeling en de opslagbestemming opgeeft. Deze procedure is niet beschikbaar wanneer [OCR] is geselecteerd in stap 5. Plaats het document, start MF Toolbox en ga verder met deze procedure. 1 Selecteer type Scan. Klik op een ander pictogram dan het pictogram [OCR].
[Opslaan als type] Selecteer hier een bestandsindeling, zoals PDF of JPEG. Het type scan dat u hebt geselecteerd in stap 1 bepaalt welke indelingen er beschikbaar zijn. Opmerkingen toevoegen aan een JPEG-bestand Als u de bestandsindeling [JPEG/Exif] selecteert, kunt u informatie zoals de datum of opmerkingen toevoegen aan JPEG-bestanden wanneer u deze gaat opslaan. Selecteer de gescande afbeelding, klik op [Exif-instellingen] en typ de opmerkingen in het weergegeven scherm.
Klik op [PDF-instellingen] en configureer de gewenste scaninstellingen. 3 Opslaginstellingen configureren Klik op [Bladeren] en selecteer het PDF-bestand waaraan u de pagina's wilt toevoegen. De zojuist gescande documentgegevens worden toegevoegd aan het PDF-bestand dat u selecteert. 4 Klik op [Starten]. Het scannen wordt gestart. Klik op [Annuleren] om te annuleren. Als u meerdere documenten scant Het onderstaande scherm wordt weergegeven.
[Scanner selecteren] Selecteer de scanner (apparaat) die u wilt gebruiken met MF Toolbox. [Computernaam] Als u scant met behulp van het bedieningspaneel van het apparaat, is er een procedure om een opslagbestemming voor het gescande document op te geven ( Scannen vanaf het apparaat). U kunt de computernaam bewerken die verschijnt op het display van het apparaat tijdens deze procedure. [Opmerking] U kunt een opmerking invoeren voor elk type scan. Bewerk de opmerking indien nodig.
0R11-030 Scaninstellingen configureren in MF Toolbox U kunt de voorinstellingen, zoals het type scan (kleur of zwart-wit), de bestandsindeling en de resolutie, wijzigen volgens het beoogde gebruik. U kunt ook een opslagbestemming voor het gescande document opgeven, een programma als doorstuurbestemming en andere instellingen opgeven. Niet alle Macintosh-gebruikers beschikken over dezelfde functies.
[Papierformaat] Selecteer het formaat van het document. Als u een optie selecteert voor een aangepast formaat, wordt het scherm [Instellingen van papierformaat] geopend. U kunt vervolgens een aangepast formaat invoeren. [Scanmodus] Selecteer het type afbeelding om documenten te scannen. De beschikbare items zijn afhankelijk van het type scan, zoals [E-mail] of [PDF]. [Zwart-wit] Het document wordt gescand als een zwart-wit afbeelding (alleen in zwart en wit, dus zonder tussenliggende grijstinten).
[Bestandsnaam] Voer hier een naam in voor het gescande afbeeldingsbestand. Als op de opslagbestemming al een bestand met dezelfde naam bestaat, wordt er een uniek getal van vier opeenvolgende cijfers (bijvoorbeeld "0001") toegevoegd aan de bestandsnaam. [Opslaan als type] Selecteer de bestandsindeling. [BMP] Het gescande document wordt geconverteerd naar een bitmapafbeelding. [JPEG/Exif] Het gescande document wordt geconverteerd naar een JPEG/Exif-afbeelding.
[Doorzoekbare PDF maken] Geef op of u het gescande document wilt converteren naar een doorzoekbare PDF. Tekens in het gescande document worden geconverteerd naar tekstgegevens en er kan naar de tekst worden gezocht met een computer. Tekst kan ook worden bewerkt met een tekstverwerkingsprogramma. Om een doorzoekbare PDF te maken, selecteert u [300 dpi] voor [Beeldkwaliteit] ( Scaninstellingen configureren). [Taal van tekst] Selecteer de taal die overeenkomt met het document.
Mozilla Thunderbird KOPPELINGEN Scannen met MF Toolbox 㻝㻟㻝㻌㻛㻌㻟㻟㻤
0R11-031 Scannen vanuit een programma Scan het document door een programma te gebruiken. U kunt Adobe Photoshop, Microsoft Office Word of andere beeldbewerkings- en tekstverwerkingsprogramma's gebruiken. De gescande afbeelding wordt rechtstreeks in het programma geladen waardoor u de afbeelding onmiddellijk kunt bewerken of verwerken. De volgende procedure verschilt afhankelijk van het programma. Het programma moet compatibel zijn met TWAIN of WIA * .
0R11-032 Scaninstellingen configureren in ScanGear MF ScanGear MF is een scannerstuurprogramma dat bij het apparaat wordt geleverd. U kunt ScanGear MF als volgt gebruiken. Starten vanuit MF Toolbox Als u scant vanuit MF Toolbox, kunt u ScanGear MF oproepen en geavanceerde scaninstellingen configureren. Schakel het Scannen selectievakje [Scannerstuurprogramma weergeven] in en klik op [Starten] in MF Toolbox om ScanGear MF te starten.
0R11-033 Scaninstellingen configureren in de eenvoudige modus Eenvoudige modus is een verzameling van basisscaninstellingen in ScanGear MF die zijn ontworpen voor een gemakkelijke bediening. Dit betekent dat Eenvoudige modus een gecomprimeerde versie is van ScanGear MF. Configureer instellingen in de volgorde die is tot en met op het scherm en klik op [Scannen]. Hierdoor kunt u de basisinstellingen configureren en het scannen opgegeven van starten.
[Afbeeldingsweergave (150 dpi)] Selecteer deze optie als u de gescande afbeelding wilt weergeven op een computer. [OCR (300 dpi)] Selecteer deze optie als u de gescande afbeelding gaat gebruiken met OCR-software (Optical Character Recognition). [Uitvoerformaat] Selecteer het formaat van de gescande afbeelding als deze wordt afgedrukt of wordt weergegeven op een computer.
0R11-034 Scaninstellingen configureren in de geavanceerde modus Als u op het tabblad [Geavanceerde modus] op het ScanGear MF-scherm klikt, kunt u meer geavanceerde aanpassingen in de beeldkwaliteit maken dan mogelijk is in de Eenvoudige modus. U kunt aangepaste instellingen ook opslaan als favoriete instellingen. Klik naast het onderwerp voor meer details.
op de vergrote afbeelding om uit te zoomen. Als u een gedeelte van de afbeelding wilt vergroten om details te bekijken, gebruikt u [Zoomen] ( ). (Naar links draaien)/ (Naar rechts draaien) Hiermee draait u de voorbeeldafbeelding 90 graden naar links of naar rechts. (Informatie) Hiermee geeft u de huidige instellingen van de gescande afbeelding weer, zoals de kleurenmodus en de grootte van het scangebied. (Automatisch bijsnijden) Stelt het bijsnijdkader dat op het gescande document past, automatisch in.
Resolutie en afbeeldingsformaat opgeven Geef de uitvoerresolutie en het uitvoerformaat op. [Uitvoerresolutie] Selecteer de resolutie van de gescande afbeelding die het best aansluit bij het beoogde gebruik. Informatie over de uitvoerresolutie Een resolutie van 75 dpi is een goede richtlijn voor het weergeven van de gescande afbeelding op een computer en 300 dpi voor het afdrukken of het maken van een doorzoekbare PDF.
[Automatisch kleur aanpassen] Met deze optie wordt automatisch de kleur van de afbeelding aangepast. [Stof en krassen reduceren] Zorgt ervoor dat stof of krassen op het document minder zichtbaar zijn. [Hoog] kan grote krassen en stof minder zichtbaar maken, maar kan ook de details op de afbeelding teniet doen. [Correctie van vervaging] De instelling is beschikbaar als u [Kleur] selecteert bij [Kleurenmodus].
[Kanaal] Als u [Kleur] selecteert bij [Kleurenmodus], kunt u de kleurkanalen [Rood], [Groen] en [Blauw] afzonderlijk aanpassen. Selecteer [Model] om alle drie de kleuren tegelijk aan te passen. De aanpassingen die u doorvoert in de modus [Model] kunt u combineren met de aanpassingen in de afzonderlijke kleurkanalen. Als u [Grijswaarden] hebt geselecteerd bij [Kleurenmodus], wordt alleen [Grijswaarden] weergegeven. [Helderheid] of voer een waarde in. Schuif met [Contrast] of voer een waarde in.
[Veel contrast] Benadrukt het verschil tussen de lichte en donkere delen van de afbeelding. [Negatief/positief beeld omkeren] Keert de lichte en donkere delen van de afbeelding om. (Laatste controle) De resultaten van alle aanpassingen aan de helderheid, het contrast ( ), het histogram ( ) en de tintcurve-instellingen ( ) worden in een tintcurve weergegeven als numerieke waarden. Voer een laatste controle van de kleurinstellingen uit.
[Voorbeeld bij starten van ScanGear] Selecteer de voorbeeldbewerking wanneer u ScanGear MF start. [Voorbeeld automatisch uitvoeren] Het scannen van de voorbeeldafbeelding wordt automatisch gestart bij het starten van ScanGear MF. [Opgeslagen voorbeeldafbeelding weergeven] De voorbeeldfunctie wordt niet automatisch gestart en de laatst opgeslagen voorbeeldafbeelding wordt weergegeven. [Geen] De voorbeeldfunctie wordt niet automatisch gestart en er wordt geen voorbeeldafbeelding weergegeven.
[Kleurcorrectie] Selecteer de kleurcorrectiemethode. [Aanbevolen] De kleuren worden helder gereproduceerd op een computerscherm. Deze instelling is geschikt voor de meeste kleurcorrecties. [Kleurafstemming] De kleur wordt aangepast zodat de kleurtint op het scherm dichter bij het afgedrukte resultaat ligt. Deze instelling is beschikbaar als u [Kleur] selecteert bij [Kleurenmodus] ( Instellingen opgeven voor documenten en kleurenmodus).
veelgebruikte instellingen opslaat als favoriete instellingen, kunt u de opgeslagen instellingen gemakkelijk oproepen wanneer u scant. De volgende instellingen kunt u niet opslaan in [Voorkeursinstellingen].
De helderheid of kleurinstelling opslaan Als u alleen de helderheid, het contrast, het histogram, de kleurtint of de drempelinstelling wilt opslaan, volgt u de onderstaande procedure. 1 2 Plaats één of meer documenten en klik op [Voorbeeld]. Pas de helderheid of de kleur aan. Helderheid en kleur aanpassen Selecteer indien nodig de instellingen die u wilt opslaan. 3 Selecteer [Toevoegen/verwijderen] in de vervolgkeuzelijst.
Scannen met MF Toolbox Scannen vanuit een programma 㻝㻠㻢㻌㻛㻌㻟㻟㻤
0R11-035 Netwerk De machine is ontworpen voor flexibel gebruik binnen verschillende omgevingen. Dit betekent dat de machine naast verschillende standaardfuncties voor netwerkgebruik, ook geavanceerde technologieën ondersteunt. Gelukkig hoeft u geen netwerkexpert te zijn om deze functies te kunnen gebruiken, bij het ontwerpen van de machine is immers ook rekening is gehouden met het gebruiksgemak.
0R11-036 Verbinding maken met een netwerk Als u het apparaat verbindt met een bekabeld of draadloos lokaal netwerk (LAN), moet u een IP-adres instellen dat uniek is voor het geselecteerde netwerk. Kies voor "bedraad" of "draadloos", afhankelijk van de communicatieomgeving en netwerkapparatuur. Raadpleeg "Aan de slag" ( Meegeleverde documentatie) voor stappen om het apparaat te verbinden en een IP-adres in te stellen.
Stel zo nodig het IP-adres in. Deze stap is vereist wanneer u een specifiek IP-adres wilt toewijzen aan het apparaat of niet de standaardinstelling DHCP wilt gebruiken voor het dynamisch toewijzen van IP-adressen.
0R11-037 Bekabeld LAN of Draadloos LAN selecteren Als u een beslissing hebt genomen ten aanzien van een bekabelde of draadloze verbinding tussen het apparaat en de computer, selecteert u Bedraad LAN of Draadloos LAN op het bedieningspaneel. Raadpleeg "Aan de slag" ( Meegeleverde documentatie) voor verbindingsinstructies en informatie over het opgeven van instellingen voor een bedraad/draadloos LAN.
0R11-038 Verbinding maken met een bekabeld LAN Sluit de machine via een router aan op een computer. Sluit de machine met een LAN-kabel aan op de router. 1 Sluit een LAN-kabel aan. Sluit de machine met een LAN-kabel aan op een router. U hoort een klik als de connector van de kabel op zijn plaats klikt. 2 Wacht ongeveer twee minuten. Dit is de tijd die nodig is om het IP-adres automatisch in te stellen. U kunt het IP-adres ook handmatig instellen.
0R11-039 Verbinding maken met een draadloos LAN Als u een draadloze router (of een toegangspunt) gebruikt, loopt de verbinding tussen de machine en een computer via radiogolven. Als uw draadloze router ondersteuning biedt voor Wi-Fi Protected Setup (WPS), kunt u het netwerk automatisch en dus eenvoudig configureren.
Als de draadloze router is ingesteld voor WEP-verificatie, kunt u mogelijk geen verbinding instellen via WPS. Verbinding handmatig instellen Als u handmatig een draadloze verbinding gaat instellen, kunt u een draadloze router selecteren of zelf de benodigde gegevens invoeren. Ongeacht de methode, moet u beschikken over de benodigde gegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren).
0R11-03A De verbinding instellen met behulp van de WPS Drukknop-modus Als uw draadloze router ondersteuning biedt voor de drukknop-modus van WPS, kunt u eenvoudig een verbinding configureren via de WPS-knop. De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op .
Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden. Wacht ongeveer 2 minuten totdat de instellingen voor het IP-adres van de machine zijn voltooid. Signaalsterkte Als voor een verbinding meerdere draadloze routers beschikbaar zijn, maakt de machine verbinding met het apparaat met het krachtigste signaal. De signaalsterkte wordt gemeten met behulp van RSSI (Received Signal Strength Indication).
0R11-03C De verbinding instellen met behulp van de WPS PIN-modus Als uw draadloze router ondersteuning biedt voor de WPS PIN-modus, genereert u een pincode met de machine en registreert u deze code op het netwerkapparaat. De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. Vanaf een computer 1 Ga in een browser naar de instellingen van de draadloze router en geef het scherm weer voor het invoeren van een WPS PIN-code.
9 Controleer of het Wi-Fi-lampje brandt op het bedieningspaneel. Het Wi-Fi-lampje brandt knippert als er een draadloze router is gedetecteerd. Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden. Wacht ongeveer 2 minuten totdat de instellingen voor het IP-adres van de machine zijn voltooid.
0R11-03E De verbinding instellen door een draadloze router te selecteren U kunt de beschikbare draadloze routers (of toegangspunten) zoeken en een keuze maken uit de display van het apparaat. Geef voor de netwerksleutel een WEP-sleutel op of TKIP. Controleer en noteer de benodigde configuratiegegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren) voordat u een draadloze router selecteert.
Voer de netwerksleutel in met de numerieke toetsen, selecteer en druk op Tekst invoeren WPA-PSK of WPA2-PSK WEP 9 . Selecteer en druk op . Als er een foutbericht verschijnt tijdens het instellen Druk op 10 , controleer of de netwerksleutel juist is en ga terug naar stap 5. Controleer of het Wi-Fi-lampje brandt op het bedieningspaneel. Het Wi-Fi-lampje brandt knippert als er een draadloze router is gedetecteerd.
0R11-03F De verbinding instellen door gedetailleerde instellingen op te geven Als u gedetailleerde beveiligingsinstellingen wilt opgeven of geen draadloze verbinding tot stand kunt brengen via de andere procedures, kunt u alle benodigde gegevens voor de draadloze verbinding ook zelf invoeren. Controleer en noteer de benodigde gegevens voordat u de instellingen gaat opgeven.
4 Selecteer de WEP-sleutel (1 tot 4) die u wilt wijzigen en druk op . U kunt maximaal vier WEP-sleutels opslaan. 5 Voer de netwerksleutel in die u hebt opgeschreven. Voer de netwerksleutel in met de numerieke toetsen, selecteer en druk op invoeren 6 Selecteer en druk op 7 Selecteer de WEP-sleutel die u hebt bewerkt en druk op . Tekst . . WPA-PSK of WPA2-PSK gebruiken 1 Selecteer en druk op 2 Selecteer de coderingsmethode en druk op . .
Als er een foutbericht verschijnt tijdens het instellen Druk op 9 , controleer of de opgegeven instellingen juist zijn en ga terug naar stap 5. Controleer of het Wi-Fi-lampje brandt op het bedieningspaneel. Het Wi-Fi-lampje brandt knippert als er een draadloze router is gedetecteerd. Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden.
0R11-03H De SSID en de netwerksleutel controleren Wanneer u handmatig een draadloze verbinding gaat instellen, moet u de SSID en netwerksleutel van de draadloze router opgeven. De SSID en de netwerksleutel worden mogelijk aangegeven op de router. Controleer het apparaat en noteer de benodigde gegevens voordat u de verbinding gaat instellen. Meer informatie over uw netwerkapparatuur kunt u lezen in de handleidingen of opvragen bij de fabrikant.
4 Lees de licentieovereenkomst en klik op [Yes] (Ja) om akkoord te gaan. 5 Controleer de gegevens die worden weergegeven voor de draadloze router. Noteer de benodigde gegevens. Als u niet weet welke gegevens u nodig hebt, noteert u alle weergegeven gegevens. Als er geen draadloze routers worden gevonden Klik op [Vernieuwen]. Als er niets gebeurt, controleert u of de instellingen goed zijn geconfigureerd op de computer en op de draadloze router.
0R11-03J IP-adressen instellen Als u de machine wilt gebruiken in een netwerk, hebt u een uniek IP-adres nodig. Er zijn twee versies van IP-adressen beschikbaar: IPv4 en IPv6. Configureer het IP-adres afhankelijk van de netwerkomgeving. Als u IPv6-adressen wilt gebruiken, moet u de IPv4adresinstellingen op de juiste manier configureren.
0R11-03K IPv4-adres instellen Het IPv4-adres van het apparaat kan automatisch worden toegewezen via een speciaal protocol zoals DHCP of het kan handmatig worden ingevoerd. Als u het apparaat verbindt met een bekabeld LAN, zorg er dan voor dat de stekker van de LAN-kabel stevig in de aansluiting zit ( Verbinding maken met een bekabeld LAN). U kunt de netwerkverbinding indien nodig testen. IPv4-adres instellen De netwerkverbinding testen IPv4-adres instellen 1 2 Druk op .
IP-adressen die worden toegewezen via DHCP/BOOTP/RARP vervangen het adres dat is verkregen via Auto IP. Handmatig een IP-adres invoeren 1 Controleer of is ingesteld op . Als wordt weergegeven, selecteert u en stelt u zowel als in op . 2 Selecteer en druk op 3 Geef het IP-adres, het subnetmasker en het gateway-adres (of de standaardgateway). .
0R11-03L IPv6-adres instellen De IPv6-adressen van het apparaat kunnen worden geconfigureerd via de UI op afstand. Controleer voordat u IPv6-adressen gaat instellen de instellingen van het IPv4-adres ( IPv4-instellingen weergeven). U moet de juiste IPv4-instellingen opgeven om te kunnen werken met IPv6-adressen. De scanfunctie die gebruikmaakt van het scannerstuurprogramma of MF Toolbox is niet beschikbaar in een IPv6-omgeving.
5 Schakel het selectievakje [Gebruik IPv6] in en configureer de vereiste instellingen. [Gebruik IPv6] Schakel dit selectievakje in om IPv6 te activeren op het apparaat. Als u IPv6 niet gebruikt, schakelt u het selectievakje uit. [Stateless adres] Schakel dit selectievakje in als u een stateless adres gebruikt. Als u geen stateless adres gebruikt, schakelt u het selectievakje uit.
Controleer of het scherm UI op afstand kan worden weergegeven op uw computer door het IPv6-adres van het apparaat te De UI op afstand starten gebruiken. Het bedieningspaneel gebruiken De IPv6-instellingen zijn ook bereikbaar via het scherm
0R11-03R Netwerkinstellingen weergeven IPv4-instellingen weergeven IPv6-instellingen weergeven Het MAC-adres weergeven Instellingen en informatie weergeven voor het draadloze LAN Het IP-adres is niet goed geconfigureerd als dit wordt weergegeven als "0.0.0.0". Als u het apparaat aansluit op een switching hub of bridge, kan er sprake zijn van een verbindingsfout, zelfs wanneer het IPadres goed is geconfigureerd.
Instellingen en informatie weergeven voor het draadloze LAN 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als u een scherm voor het invoeren van een pincode ziet, voert u de pincode in met de numerieke toetsen en drukt u op De pincode van de systeembeheerder instellen 3 Selecteer en druk op .
0R11-03S Het apparaat configureren voor afdrukken vanaf een computer Als u het apparaat gebruikt als een netwerkprinter, kunt u de protocollen en poorten configureren die u wilt gebruiken voor afdrukken en een printserver instellen voor het apparaat. Ga het apparaat pas configureren voor afdrukken vanaf een computer nadat u de basisprocedures hebt uitgevoerd, zoals het installeren van het printerstuurprogramma (MF Driver Installation Guide).
0R11-03U Afdrukprotocollen en WSD-functies configureren Configureer de protocollen die worden gebruikt voor het afdrukken van documenten vanaf een netwerkcomputer. De ondersteunde protocollen zijn LPD, RAW en WSD (Web Services on Devices). Om de poortnummers van protocollen te wijzigen, raadpleegt u 1 2 Poortnummers wijzigen(MF212w). Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/registratie].
[Gebruik LPD-afdrukken] Schakel dit selectievakje in om af te drukken via LPD. Als u niet afdrukt via LPD, schakelt u het selectievakje uit. [Gebruik RAW-afdrukken] Schakel dit selectievakje in om af te drukken via RAW. Als u RAW niet gebruikt om af te drukken, schakelt u het selectievakje uit. 3 Klik op [OK]. WSD configureren 1 Klik op [Bewerken...] in [WSD-instellingen]. 2 Configureer de instellingen. [Gebruik WSD-afdrukken] Schakel dit selectievakje in om af te drukken via WSD.
het netwerk. 3 5 Klik op [OK]. Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken De instellingen voor LPD, RAW en WSD zijn ook bereikbaar via het scherm
0R11-03W Printerpoorten configureren Er kunnen afdrukfouten optreden wanneer het IP-adres van de machine is gewijzigd of wanneer er een printer is toegevoegd via de printermap van Windows. Deze fouten zijn meestal het gevolg van onjuiste printerpoortinstellingen. Zo kan er een onjuist poortnummer of type poort zijn opgegeven. In dergelijke situaties mislukt het afdrukken omdat de documentgegevens niet aankomen op de machine.
3 Klik op [Auto Detect] (Autom. detectie), selecteer het apparaat als dit is gevonden en klik op [Next] (Volgende). Als het apparaat niet wordt gevonden Klik op [Refresh] (Vernieuwen). Als het probleem blijft optreden, klikt u op [IP address] (IP-adres) of [MAC address] (MAC-adres), voert u het IP-adres of MAC-adres van het apparaat Netwerkinstellingen weergeven in en klikt u op [Next] (Volgende). 4 Klik op [Add] (Toevoegen) 5 Klik op [Close] (Sluiten). [Finish] (Voltooien).
KOPPELINGEN Een printserver instellen 㻝㻣㻥㻌㻛㻌㻟㻟㻤
0R11-03X Een printserver instellen Het installeren van een printserver (afdrukserver) betekent dat u de computer kunt ontlasten die u gebruikt om af te drukken. Een ander voordeel is dat de computers de MF-stuurprogramma's via het netwerk kunnen installeren en dat u dit dus niet per computer hoeft te doen vanaf de dvd-rom. Als u een computer in het netwerk wilt instellen als een printserver, moet u de instellingen voor het delen van de printer configureren.
Klik op [Change sharing options] (Opties voor delen wijzigen). Als het dialoogvenster [User Account Control] (Gebruikersaccountbeheer) verschijnt, klikt u op [Yes] (Ja) of [Continue] (Doorgaan). 4 Installeer eventueel aanvullende stuurprogramma's. Deze bewerking is noodzakelijk als u via de printserver MF-stuurprogramma's wilt installeren op computers met een andere bitarchitectuur. 1 Klik op [Additional drivers] (Extra stuurprogramma's).
MF-stuurprogramma's via de printserver installeren op een computer 1 2 3 Zoek de gedeelde printer op de printserver. Printers weergeven die worden gedeeld op de printserver Dubbelklik op de gedeelde printer. Volg de instructies op het scherm om de stuurprogramma's te installeren.
0R11-03Y De machine configureren voor uw netwerkomgeving De configuratie van een netwerk varieert naargelang de functie van het netwerk. Geef de juiste instellingen voor uw netwerkomgeving op.
0R11-040 Ethernet-instellingen configureren Ethernet is een standaard voor het uitwisselen van gegevens in een lokaal netwerk (LAN). U kunt de communicatiemodus (Half duplex/Full duplex) en het type Ethernet (10BASE-T/100BASE-TX) instellen. Over het algemeen is het zo dat u het apparaat kunt gebruiken zonder dat u de standaardinstellingen hoeft te wijzigen ( Instellingen Ethernet-stuurprogramma), maar u kunt de instellingen wijzigen om deze beter af te stemmen op uw netwerkomgeving. 1 2 Druk op .
De maximale verzendeenheid wijzigen Een wachttijd instellen voor verbinding met een netwerk 㻝㻤㻡㻌㻛㻌㻟㻟㻤
0R11-041 De maximale verzendeenheid wijzigen In de meeste Ethernet-netwerken is 1500 bytes de maximale grootte van een gegevenspakket dat kan worden verzonden. Een pakket is het blok met gegevens waarin de oorspronkelijke gegevens worden opgedeeld voordat ze worden verzonden. De maximale verzendeenheid (MTU) kan per netwerk verschillen. Wijzig de instellingen van het apparaat indien nodig. Neem voor meer informatie contact op met de netwerkbeheerder. 1 2 Druk op .
0R11-042 Een wachttijd instellen voor verbinding met een netwerk Als in een netwerk redundante connectiviteit wordt aangeboden door de aanwezigheid van verschillende switching hubs of bridges, moet er een mechanisme zijn om te voorkomen dat pakketten in een oneindige lus terechtkomen. Een efficiënte oplossing is dus om voor elke switch-poort een bepaalde rol te definiëren.
0R11-043 DNS configureren DNS (Domain Name System) is een service voor naamomzetting waarmee de naam van een host (of domein) wordt gekoppeld aan een IP-adres. Configureer de benodigde instellingen voor DNS, mDNS of DHCP. De procedures voor het configureren van DNS zijn verschillend voor IPv4 en IPv6. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/registratie]. 3 Klik op [Netwerkinstellingen] 4 Configureer de DNS-instellingen. [TCP/IP-instellingen].
[DNS-instellingen] [Adres primaire DNS-server] Voer het IP-adres van een DNS-server in. [Adres secundaire DNS-server] Voer het IP-adres van een secundaire DNS-server in, indien beschikbaar. [Hostnaam] Typ hier maximaal 47 alfanumerieke tekens voor de hostnaam van het apparaat dat u wilt registreren op de DNSserver. [Domeinnaam] Typ hier maximaal 47 alfanumerieke tekens voor de naam van het domein waarvan het apparaat deel uitmaakt, zoals "voorbeeld.com".
2 Configureer de DNS-instellingen van IPv6. Het selectievakje [Gebruik IPv6] moet zijn ingeschakeld om de instellingen te configureren. IPv6-adres instellen [DNS-instellingen] [Adres primaire DNS-server] Voer het IP-adres van een DNS-server in. U kunt geen adressen invoeren die beginnen met "ff" (multicast-adressen). [Adres secundaire DNS-server] Voer het IP-adres van een secundaire DNS-server in, indien beschikbaar. U kunt geen adressen invoeren die beginnen met "ff" (multicast-adressen).
Het bedieningspaneel gebruiken De DNS-instellingen zijn ook bereikbaar via het scherm
0R11-044 De machine bewaken en bedienen met SNMP SNMP (Simple Network Management Protocol) is een protocol voor het bewaken en aansturen van communicatieapparaten in een netwerk dat werkt met MIB (Management Information Base). Het apparaat ondersteunt SNMPv1. U kunt de status van de machine controleren vanaf een computer wanneer u documenten afdrukt of de UI op afstand gebruikt. Het apparaat biedt geen ondersteuning voor de functie van SNMP voor het versturen van trap-meldingen.
5 Geef instellingen voor SNMPv1 op. [Gebruik SNMPv1] Schakel dit selectievakje in om SNMPv1 in te schakelen. De overige instellingen voor SNMPv1 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruik community-naam 1]/[Gebruik community-naam 2] Schakel het selectievakje in om een Community-naam op te geven. Als u geen Community-naam hoeft op te geven, schakelt u het selectievakje uit. [Community-naam] Gebruik maximaal 32 alfanumerieke tekens voor de naam van de community.
SNMPv1 uitschakelen Schakel het selectievakje [Gebruik SNMPv1] uit. 6 Geef instellingen op voor het verkrijgen van informatie voor het beheren van printers. Met SNMP kunt u gegevens voor het beheren van printers, zoals afdrukprotocollen en printerpoorten, controleren en periodiek opvragen bij een computer in het netwerk. [Printerbeheerinformatie verkrijgen van host] Schakel het selectievakje in om via SNMP de gegevens voor printerbeheer van het apparaat te bewaken.
0R11-045 Beveiliging De realiteit is dat overal en altijd vertrouwelijke gegevens worden verwerkt door informatieapparaten, waaronder computers en printers. Het vervelende is dat elk van deze apparaten het doelwit kan worden van kwaadwillende derden. Aanvallers kunnen ongeoorloofde toegang krijgen tot uw apparaten of indirect voordeel halen uit slordigheid. Hoe het ook zij, u kunt geconfronteerd worden met onverwachte verliezen als uw vertrouwelijke gegevens worden onderschept.
0R11-046 De machine beschermen tegen ongeoorloofde toegang Voorkom dat onbevoegden toegang krijgen tot de machine en deze kunnen gebruiken. U kunt verschillende beveiligingsmaatregelen treffen, zoals het instellen van firewalls en het aanpassen van poortnummers.
0R11-047 De pincode van de systeembeheerder instellen Stel een pincode in die uitsluitend voor systeembeheerders is bedoeld. U hebt alleen toegang tot , enzovoort u wanneer de pincode correct hebt ingevoerd. Alleen beheerders dienen op de hoogte te zijn van de pincode. 1 2 3 4 Druk op . Druk op / om te selecteren en druk vervolgens op Selecteer . .
0R11-048 Communicatie beperken door firewalls in te stellen Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten. Op deze manier wordt de communicatie beperkt tot apparaten met bepaalde IP-adressen of MAC-adressen.
0R11-049 IP-adressen opgeven voor firewallregels U kunt de communicatie beperken tot alleen apparaten met bepaalde IP-adressen of apparaten met specifieke IP-adressen blokkeren maar andere communicatie toestaan. U kunt een afzonderlijk IP-adres opgeven of een bereik van IP-adressen. U kunt maximaal 4 IP-adressen (of bereiken van IP-adressen) opgeven voor zowel IPv4 als IPv6. De hier beschreven pakketfilters besturen de communicatie over TCP, UDP en ICMP.
[IPv6-adres: Infilter] Selecteer deze optie om het ontvangen van gegevens van het apparaat naar een computer te beperken door IPv6-adressen op te geven. 5 Geef de instellingen voor pakketfiltering op. [Geblokkeerde adressen] Registreer te blokkeren adressen en controleer of verwijder geregistreerde geblokkeerde adressen. [Toegestane adressen] Registreer adressen die moeten worden toegestaan, en controleer of verwijder geregistreerde toegestane adressen. 1 Schakel het selectievakje [Gebruik filter] in.
IPv4: Een bereik van adressen opgeven 192.168.0.10192.168.0.20 Plaats een afbreekstreepje tussen de adressen. IPv6: fe80::10-fe80::20 Een bereik van adressen opgeven met een voorvoegsel (alleen IPv6) Typ het adres, gevolgd door een schuine streep en een getal dat de lengte van het voorvoegsel aangeeft. fe80::1234/64 Een IP-adres verwijderen uit de uitzonderingen Selecteer een IP-adres en klik op [Verwijderen]. 3 Klik op [OK].
0R11-04A MAC-adressen opgeven voor firewallregels U kunt de communicatie beperken tot alleen apparaten met bepaalde MAC-adressen of apparaten met specifieke MAC-adressen blokkeren maar andere communicatie toestaan. U kunt maximaal 10 MAC-adressen opgeven. Deze functie is niet beschikbaar wanneer het apparaat is verbonden met een draadloos LAN. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/registratie].
1 Schakel het selectievakje [Gebruik filter] in. Schakel het selectievakje in om de communicatie te beperken. Schakel het selectievakje uit om de beperking op te heffen. 2 Geef het adres op. Typ het MAC-adres in het vak [Te registreren adres] en klik op [Toevoegen]. Staat alleen communicatie (inkomend) toe met apparaten met een geregistreerd MAC-adres, en blokkeert de communicatie met apparaten met andere MACadressen. U hoeft geen afbreekstreepjes of dubbelepunten te gebruiken in het adres.
0R11-04C Poortnummers wijzigen Poorten vormen het eindpunt van het communicatietraject tussen apparaten. Belangrijke protocollen maken meestal gebruik van vaste poortnummers. Een nadeel hiervan is dat apparaten met deze poortnummers kwetsbaar zijn voor aanvallen, iedereen weet de poortnummers namelijk. De netwerkbeheerder kan de beveiliging verder verbeteren door andere poortnummers te gebruiken.
0R11-04E Een proxy instellen Een proxy (of HTTP-proxyserver) verwijst naar een computer of software die HTTP-communicatie uitvoert voor andere apparaten, met name bij communicatie met bronnen buiten het netwerk, zoals bij het browsen op websites. De clientapparaten maken via de proxyserver verbinding met het externe netwerk en communiceren niet rechtstreeks met de externe bronnen.
[Gebruik proxy] Schakel het selectievakje in om de opgegeven proxyserver te gebruiken voor communicatie met een HTTP-server. [Adres HTTP-proxyserver] Voer het adres van de proxyserver in. Geef het IP-adres op of de hostnaam, afhankelijk van de omgeving. [Poortnummer HTTP-proxyserver] Wijzig eventueel het poortnummer. Voer een nummer in tussen 1 en 65535. [Gebruik proxy binnen zelfde domein] Schakel dit selectievakje in om gebruik te maken van een proxyserver die in hetzelfde domein is opgegeven.
0R11-04F De functies van de machine beperken De kans bestaat dat sommige functies van de machine bijna nooit worden gebruikt of aanleiding geven voor misbruik. Uit veiligheidsoverwegingen kunt u de functionaliteit van de machine beperken door deze functies geheel of gedeeltelijk uit te schakelen.
0R11-04H HTTP-communicatie uitschakelen HTTP wordt gebruikt voor communicatie via het netwerk, bijvoorbeeld wanneer u het apparaat bedient via de UI op afstand. Als u een USB-verbinding gebruikt of HTTP om een andere reden niet nodig hebt, kunt u het protocol uitschakelen om aanvallen van kwaadwillende gebruikers via de ongebruikte HTTP-poort te voorkomen. Als u HTTP uitschakelt, zijn bepaalde netwerkfuncties niet meer beschikbaar, zoals de UI op afstand en afdrukken via WSD. 1 2 Druk op .
0R11-04J De UI op afstand uitschakelen De UI op afstand is handig omdat u dan instellingen voor de machine kunt opgeven via een webbrowser op een computer. U kunt de UI op afstand alleen gebruiken als de machine via het netwerk is verbonden met een computer. Als u de UI op afstand niet nodig hebt, kunt u de interface uitschakelen om het risico te verkleinen dat de machine door kwaadwillende gebruikers op afstand wordt bediend via het netwerk. 1 2 Druk op .
0R11-04K De UI op afstand gebruiken Als u een webbrowser gebruikt om het apparaat op afstand te bedienen, kunt u de documenten die wachten om te worden afgedrukt, of de status van het apparaat controleren. U kunt ook enkele instellingen opgeven, bijvoorbeeld voor beveiliging. U hoeft uw bureau dus niet te verlaten om systeembeheertaken uit te voeren.
0R11-04L De UI op afstand starten Om het apparaat op afstand te bedienen, moet u het IP-adres van het apparaat in een webbrowser invoeren en de UI op afstand opstarten. Controleer vooraf het IP-adres dat op het apparaat is ingesteld ( Netwerkinstellingen weergeven). Als u vragen hebt, neemt u contact op met de netwerkbeheerder. 1 2 Start de webbrowser. Typ "http://(het IP-adres van de machine)/" in het adresveld en druk op [Enter].
㻞㻝㻞㻌㻛㻌㻟㻟㻤
0R11-04R Schermen van de UI op afstand In dit gedeelte worden de belangrijkste schermen van de UI op afstand beschreven. Portaalpagina (hoofdpagina) Pagina [Statusmonitor/annuleren] Pagina [Instellingen/registratie] Portaalpagina (hoofdpagina) [Afmelden] Hiermee meldt u zich af bij de UI op afstand. UI staat trouwens voor User Interface, ofwel gebruikersinterface in het Nederlands. De aanmeldingspagina wordt vervolgens weergegeven.
[Naar portal] Keert terug naar de portaalpagina (hoofdpagina). Menu Klik op een item en de inhoud wordt weergegeven op de rechterpagina. controleren Documenten beheren en de status van de machine Navigatiepad De reeks van pagina's die u hebt geopend om bij de huidige pagina te komen. U kunt hier zien welke pagina wordt weergegeven. Pictogram Vernieuwen Hiermee vernieuwt u de weergegeven pagina.
0R11-04S Documenten beheren en de status van de machine controleren De huidige status van afdruktaken controleren Foutgegevens controleren Verbruiksartikelen controleren De maximale afdruksnelheid controleren Gegevens van systeembeheerder controleren Totaal aantal afdrukken controleren De bestandsnaam van het document geeft slechts 255 tekens weer. De afgedrukte toepassingsnaam kan aan de bestandsnaam worden toegevoegd.
Verbruiksartikelen controleren U kunt een scherm met het papierformaat en papiertype voor de papierbron, het serienummer van de tonercartridge, en andere informatie weergeven. Meld u aan bij de UI op afstand ( De UI op afstand starten) [Statusmonitor/annuleren] [Verbruiksartikelen] U kunt ook op [Details verbruiksartikelen controleren] op de portaalpagina (hoofdpagina) klikken om het scherm voor het controleren van verbruiksartikelen te openen.
U kunt informatie over het apparaat en de systeembeheerder weergeven. Deze informatie is ingesteld bij [Systeembeheer] op de pagina Instellingen Systeembeheer [Instellingen/registratie]. Meld u aan bij de UI op afstand ( De UI op afstand starten) [Statusmonitor/annuleren] [Apparaatinformatie] [Statusmonitor/annuleren] [Controleer tellerstand] Totaal aantal afdrukken controleren U kunt controleren hoeveel pagina's er in totaal zijn afgedrukt en gekopieerd.
0R11-04U Menuopties instellen via de UI op afstand U kunt verschillende instellingen van de machine wijzigen met de UI op afstand. De meeste instellingen kunnen ook via het bedieningspaneel van de machine worden gewijzigd, maar sommige instellingen kunt u alleen wijzigen via de UI op afstand. U kunt de instellingen alleen wijzigen als u zich aanmeldt in de systeembeheerdersmodus. 1 2 3 Start de UI op afstand. De UI op afstand starten Klik op [Instellingen/registratie].
Instellingsgegevens initialiseren Menu initialiseren KOPPELINGEN Schermen van de UI op afstand 㻞㻝㻥㻌㻛㻌㻟㻟㻤
0R11-04W Overzicht van menuopties Er zijn verschillende instellingen in dit apparaat. U kunt alle opties uitgebreid aanpassen. Druk op U kunt een lijst afdrukken met alle instellingen om de huidige instellingen te controleren: Uitvoerrapport 㻞㻞㻜㻌㻛㻌㻟㻟㻤 om toegang te krijgen tot de opties.
0R11-04X Netwerkinstellingen Alle instellingen voor het netwerk worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Als u een scherm voor het invoeren van een pincode ziet, voert u de pincode in met de numerieke toetsen en drukt u op De pincode van de systeembeheerder instellen .
Selecteer deze optie om een draadloze verbinding te configureren door handmatig een SSID in te voeren. Als u deze methode De verbinding instellen door gedetailleerde gebruikt, kunt u gedetailleerde instellingen opgeven voor verificatie en codering. instellingen op te geven Beveiligingsinstell.
Gateway-adres: 0.0.0.0 Controleer instellingen Automatisch verkrijgen IP-adres Subnetmasker Gateway-adres PING-opdracht Selecteer deze optie om te controleren of de machine via een netwerk is verbonden met een computer. testen De netwerkverbinding DNS-instellingen Kies deze optie om instellingen op te geven voor DNS (Domain Name System), een mechanisme voor het omzetten van DNS configureren hostnamen in IP-adressen. DNS-serverinstellingen Primaire DNS-server: 0.0.0.0 Secundaire DNS-server: 0.0.0.
Controleer instellingen Stateful adres Prefixlengte DNS-instellingen Kies deze optie om instellingen op te geven voor DNS (Domain Name System), een mechanisme voor het omzetten van DNS configureren hostnamen in IP-adressen. Instellingen DNS-hostnaam/domeinnaam Gebr.
Uit Aan Gebruik Multicast Discovery Uit Aan Gebruik HTTP Hiermee kunt u HTTP in- of uitschakelen. HTTP is een protocol dat vereist is voor communicatie met een computer, bijvoorbeeld HTTP-communicatie uitschakelen wanneer u de UI op afstand gaat gebruiken of gaat afdrukken via WSD. Uit Aan Instellingen poortnummer Kies deze optie om de standaardpoortnummers voor protocollen te wijzigen voor uw netwerkomgeving.
geselecteerd selecteer of geef instellingen op als is Printerbeheerinformatie verkrijgen van host Selecteer deze optie om het bewaken van printerbeheerinformatie vanaf een netwerkcomputer met SNMP-compatibele software in of uit te schakelen.
Communicatiemodus Half-duplex Full-duplex Type Ethernet 10BASE-T 100BASE-TX Aan MAC-adres Controleer het MAC-adres van het apparaat. Dit is een nummer dat uniek is voor elk communicatieapparaat. weergeven Het MAC-adres Initialiseer Netwerkinstellingen Selecteer deze optie om de standaardwaarden van de netwerkinstellingen te herstellen.
0R11-04Y Uitvoerrapport U kunt de lijst met instellingen en de inhoud die op het apparaat is opgeslagen, controleren door een lijst met gebruikersgegevens af te drukken. Rapporten of lijsten kunnen worden afgedrukt op papier van het formaat A4 of Letter.
0R11-050 Voorkeuren Alle instellingen voor het display worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Als een scherm voor het invoeren van een pincode wordt weergegeven Voer de pincode in met de numerieke toetsen en druk op . De pincode van de systeembeheerder instellen Sterretjes (*) Opties die met een sterretje (*) zijn gemarkeerd, hebben per land of regio afwijkende standaardinstellingen.
helderheid aan te passen druk op / om de Schermkleuren inverteren Selecteer om de schermkleuren om te wisselen. Selecteer als het scherm lastig te lezen is, zelfs nadat u de helderheid hebt aangepast met de optie . Uit Aan selecteer of Millimeter/inch invoerschak. Selecteer de maateenheid.
Snel snelheid selecteer de Cursorverplaatsing Met deze optie kunt u instellen hoe de cursor wordt verplaatst nadat u een teken hebt ingevoerd op het scherm. Selecteer als de cursor automatisch achter het ingevoerde teken moet worden geplaatst. Selecteer als u de cursor zelf achter het ingevoerde teken wilt plaatsen.
0R11-051 Tijdklokinstellingen Alle instellingen voor de timer worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKINGEN Sterretjes (* ) Opties gemarkeerd met "*1" zijn mogelijk niet beschikbaar of hebben per land of regio afwijkende standaardinstellingen. Opties gemarkeerd met "*2" gelden alleen voor de MF212w. Tijd stille modus Instellingen Datum en tijd Automat.
Tijdnotatie Selecteer de 12- of 24-uurs tijdnotatie. 12 uur (AM/PM) 24 uur weergave-instelling selecteer de Huidige datum/tijd instellen Hiermee stelt u de huidige datum en tijd in. Druk op geven of om te schakelen tussen /. stel de datum en tijd in / om de cursor te verplaatsen en op
Als het apparaat gedurende een bepaalde periode niet is gebruikt of geen gegevens heeft verwerkt, wordt de slaapstand (sluimerstand) geactiveerd om energie te besparen. Geef de periode op waarna de automatische sluimertijd ingaat. De automatische sluimerstand wordt niet geactiveerd als het instellingenmenu wordt weergegeven. Gebruik de standaardinstellingen om zo veel mogelijk stroom te besparen. De slaapstand instellen 5 t/m 30 (min.
0 (de machine blijft online) 1 t/m 5 t/m 60 (min.) stel de periode in Auto uitschakeltijd U kunt een timer instellen om de machine automatisch uit te schakelen zodra de opgegeven periode van inactiviteit is verstreken na activering van de slaapstand.
0R11-052 Kopieerinstellingen Alle instellingen voor het kopiëren worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Wijzig standaardinstellingen Densiteit corrigeren Wijzig standaardinstellingen U kunt de standaardinstellingen voor kopiëren wijzigen. De geselecteerde instellingen worden gebruikt als de standaardinstellingen voor de kopieerfunctie. De standaardinstellingen wijzigen Aantal kopieën 1 t/m 99 Densiteit -4 t/m 0 t/m +4 Auto densit.
0R11-053 Scaninstellingen Alle instellingen voor het scannen worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Sneltoetsinstellingen en (op de MF211 doet u dit voor de toets ). De instellingen bestaan uit de Sla de scaninstellingen op voor de toetsen computer waarop gescande afbeeldingen worden opgeslagen, het type scan (kleur of zwart-wit) en de bestandsindeling (PDF of JPEG).
0R11-054 Printerinstellingen Alle instellingen voor de printer worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Actie wanneer papierformaat niet overeenkomt Halftonen mobiel afdrukken * AirPrint-prioriteit snelheid/beeldkwaliteit * Sterretjes (* ) Opties gemarkeerd met een sterretje (* ) zijn alleen beschikbaar voor de MF212w.
U kunt opgeven of bij gebruik van AirPrint prioriteit moet worden gegeven aan de afdruksnelheid of de afdrukkwaliteit. Snelheidsprioriteit Prioriteit beeldkwaliteit
0R11-055 Aanpassing/onderhoud Alle instellingen voor de afstelling en het onderhoud van het apparaat worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Tonerbesparing Speciale verwerking Fixeereenheid reinigen Tonerbesparing Selecteer deze optie om tijdens het kopiëren de functie voor tonerbesparing in of uit te schakelen. Kopiëren Uit Aan Als is ingesteld.
luchtvochtigheid). Speciale modus V Wijzig deze instelling als gekrulde of gekreukelde afdrukken worden uitgevoerd. Uit Modus 1 Modus 2 Modus 3 selecteer de modus De instelling activeren Deze instelling wordt in de volgende omstandigheden geactiveerd. Het papierformaat is ingesteld op , , of . is ingesteld op , , , of .
Na het afdrukken vanaf een smartphone of tablet Als er strepen op afdrukken zichtbaar zijn, wijzigt u de instelling met . Speciale modus B Wijzig deze instelling als uw afdrukken strepen vertonen nadat u de tonercartridge hebt vervangen of wanneer u voor het eerst na lange tijd afdrukt. Uit Modus 1 Modus 2 Modus 3 selecteer de modus Nadat de instelling is geactiveerd De afdruksnelheid is lager.
selecteer of Nadat de instelling is geactiveerd Als is opgegeven, heeft deze instelling prioriteit ten opzichte van de instelling voor . Deze modus heeft een sterker effect dan , maar de afdruksnelheid is lager. Na het afdrukken vanaf een smartphone of tablet Als er strepen op afdrukken zichtbaar zijn, wijzigt u de instelling met .
Speciale modus K Als toner niet goed hecht en afdrukken flets zijn, selecteert u . Uit Aan Als is ingesteld De afdruksnelheid is lager. Fixeereenheid reinigen Reinig de fixeereenheid nadat een tonercartridge is vervangen of als afdrukken zwarte strepen bevatten.
0R11-056 Instellingen Systeembeheer Alle instellingen voor systeembeheerinstellingen worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKINGEN Sterretjes (* ) Opties gemarkeerd met "*1" gelden alleen voor de MF212w. Opties gemarkeerd met "*2" hebben per land of regio afwijkende standaardinstellingen.
of invoeren) selecteer voer een waarde in voor of ( Tekst Beveiligingsinstellingen *1 Selecteer deze optie om instellingen in of uit te schakelen voor het filteren van pakketten op IP- of MAC-adressen.
selecteer of Selecteer land/regio *2 Geef het land of de regio op waarin de machine wordt gebruikt. De standaardinstelling kan verschillen, aangezien deze wordt bepaald op het moment dat de machine de eerste keer wordt ingeschakeld.
Gebruik als USB-apparaat Hiermee kunt u de USB-poort in- of uitschakelen waarmee de machine kan worden verbonden met een computer. Uit Aan start het apparaat opnieuw op selecteer of Product Extended Survey Program inschak. Hiermee kunt u Product Extended Survey Program in- of uitschakelen (een programma voor het verzamelen van gebruiksgegevens van de machine).
PDL-selectie (Plug and Play) Selecteer een paginabeschrijvingstaal (PDL), zodat de machine wordt gedetecteerd als een printer die compatibel is met die taal wanneer de machine via Plug and Play wordt aangesloten op een computer. MF Driver Installation Guide Netwerk*1 Selecteer een paginabeschrijvingstaal (PDL), zodat de machine wordt gedetecteerd als een printer die compatibel is met die taal wanneer de machine wordt gedetecteerd via het netwerk.
Systeembeheerinstellingen initialiseren Selecteer deze optie om de standaardwaarden voor systeembeheer te herstellen. U kunt alle systeembeheerinstellingen in één keer Instellingen voor systeembeheer initialiseren herstellen. Netwerkinstellingen *1 Instellingen Systeembeheerderinformatie Instellingen Apparaatinformatie Beveiligingsinstellingen *1 Instellingen externe UI *1 Autom. online voor scannen op afstand Gebruik als USB-apparaat Product Extended Survey Program inschak. Info verbr.art.
0R11-057 Menu initialiseren Selecteer deze optie om voor de onderstaande instellingen de standaardwaarden te herstellen. U kunt Menu initialiseren alle instellingen in één keer herstellen of alleen bepaalde instellingen.
0R11-058 Problemen oplossen Als er een probleem optreedt, raadpleegt u dit hoofdstuk om oplossingen te zoeken voordat u contact opneemt met Canon. Papierstoringen Als een document of papier vastloopt, raadpleegt u Papierstoringen verhelpen om het vastgelopen papier te verwijderen. Er wordt een bericht weergegeven Als er een bericht op het scherm verschijnt, raadpleegt u het volgende gedeelte.
0R11-059 Papierstoringen verhelpen Als het papier is vastgelopen, wordt weergegeven op het scherm. Druk op om eenvoudige oplossingen weer te geven. Als u de procedures op het scherm niet goed begrijpt, raadpleegt u de volgende gedeeltes om storingen te verhelpen. Als u het vastgelopen papier gaat verwijderen, moet u het apparaat niet uitschakelen Als u dat doet, gaan de afdrukgegevens namelijk verloren.
2 Open de tonerklep met de handgreep aan de rechtervoorzijde van de klep. 3 Verwijder de tonercartridge. 2 Trek het document voorzichtig uit de invoer. 3 Controleer of er papier in de documentuitvoerklep vastzit. 4 1 Trek naar u toe terwijl u de knop ( 2 Trek het document voorzichtig uit de invoer. 3 Sluit de uitvoerklep. ) ingedrukt houdt om de uitvoerklep te openen. Controleer of er papier in het apparaat vastzit. 1 Als er papier tussen de fixeereenheid ( het papier ziet.
2 5 6 Zodra de rand van het papier zichtbaar is, trekt u het langzaam uit het apparaat. Controleer of er papier vastzit in de sleuf voor handmatige invoer of de papierlade. 1 Trek vastgelopen papier uit de sleuf voor handmatige invoer. 2 Open de papierklep en verwijder eventueel papier. 3 Trek het document voorzichtig uit de invoer. 4 Plaats papier en sluit de papierklep. Installeer de tonercartridge. Plaats de nokken aan de rechter- en linkerkant ( apparaat.
7 Sluit de tonerklep en laat het bedieningspaneel zakken. Als u de tonerklep niet kunt sluiten Controleer of de tonercartridge goed is ingebracht. Als u de klep forceert, kan deze beschadigd raken.
0R11-05A Er wordt een foutbericht weergegeven Als u geen verbinding met het netwerk kunt maken, het geheugen vol is of als er bedieningsproblemen zijn, verschijnt er een bericht op het scherm. In de volgende lijst worden deze foutberichten toegelicht. Auth. met gedeelde sleutel mislukt. Contr. WEP-instell. De netwerksleutel (de WEP-sleutel) van een draadloze router waarmee verbinding moet worden gemaakt, is niet goed ingesteld op de machine.
Er is geen papier geplaatst in de papierlade of in de sleuf voor handmatige invoer. Hier plaatst u het papier. Papier plaatsen Er is geen papier geladen waarop rapporten of lijsten kunnen worden afgedrukt. Rapporten of lijsten kunnen worden afgedrukt op papier van het formaat A4 of Letter. Laad papier van het formaat A4 of Letter en stel dit formaat in. Papier plaatsen Het type en formaat papier opgeven Geen respons van host. De machine is niet op de juiste manier verbonden met een netwerk.
Kan geen verbinding maken via draadloos LAN. De verbinding is mislukt vanwege een fout tijdens het instellen van de draadloze LAN-verbinding. Start de machine opnieuw op en geef de instellingen nogmaals op. Als het probleem ook blijft optreden nadat u het apparaat opnieuw hebt opgestart, controleert u of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk.
Papier vastgelopen. Er is papier vastgelopen. Verwijder het vastgelopen papier of document, en druk opnieuw af (mogelijk wordt het afdrukken automatisch verder uitgevoerd). Papierstoringen verhelpen Reinigen mislukt. Er is papier vastgelopen tijdens het reinigen. Verwijder het vastgelopen papier, plaats het papier op de juiste manier en voer de reinigingsprocedure nogmaals uit. Papierstoringen verhelpen Fixeereenheid Er is onvoldoende toner beschikbaar voor het reinigen van de fixeereenheid.
0R11-05C Veelvoorkomende problemen Als er problemen ontstaan tijdens het gebruiken van de machine, controleer dan de tips in dit gedeelte voordat u contact met ons opneemt. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
0R11-05E Problemen met installatie/instellingen Zie ook Veelvoorkomende problemen. Pictogrammen in de beschrijving Probleem met de draadloze LAN-verbinding Probleem met de bekabelde LAN-verbinding Probleem met de USB-verbinding De machine kan niet tegelijkertijd via een draadloos LAN, een bekabeld LAN en een USB-kabel met een computer worden verbonden. Het is niet mogelijk om de drie verschillende verbindingstypen tegelijkertijd te gebruiken.
doorgegeven. Als de inbelrouter broadcast-pakketten moet doorgeven, controleert u of de instellingen juist zijn. Als er een DNS-server is opgesteld in een extern netwerk, stelt u het IP-adres in voor de verbinding en niet de hostnaam, zelfs niet als er verbinding wordt gemaakt met de apparaten die deel uitmaken van het netwerk waarop het apparaat is aangesloten.
0R11-05F Problemen bij het kopiëren Zie ook Veelvoorkomende problemen. Het afdrukresultaat is niet goed. Het papier is gekreukeld of krult om.
0R11-05H Problemen bij het afdrukken Zie ook Veelvoorkomende problemen. Het afdrukresultaat is niet goed. Het papier is gekreukeld of krult om. Als u niet goed kunt afdrukken U kunt niet afdrukken.
0R11-05J Als u niet goed kunt afdrukken Probeer de volgende oplossingen als het afdrukresultaat te wensen overlaat, of als het papier gekreukeld is of omkrult. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
0R11-05K Het afdrukresultaat is niet goed Als het apparaat van binnen vies is, kan dit gevolgen hebben voor het afdrukresultaat. Reinig het apparaat zorgvuldig. Het apparaat reinigen Vlekken aan de rand van afdrukken Drukt u gegevens af zonder marges? Dit symptoom doet zich voor als een marge is ingesteld op Geen in het printerstuurprogramma. Marges van 5 mm of minder rond de rand van het papier of 10 mm of minder rond de rand van enveloppen vallen buiten het bedrukbare gebied van het apparaat.
Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges. Tonercartridges vervangen Vlekken en spetters Gebruikt u geschikt papier? Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Papier Papier plaatsen Controleer de instelling voor . Speciale verwerking Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges.
Afdrukken vertonen witte stippen Gebruikt u geschikt papier? Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Papier Papier plaatsen Is de drum in de tonercartridge niet meer goed? Vervang de tonercartridge door een nieuwe. Tonercartridges vervangen Drukt u een document hoog contrast af? Wijzig de instelling voor [Modus Speciaal afdrukken] in het printerstuurprogramma. [Speciale instellingen 2] geeft een lichtere afdrukdichtheid dan [Uit] of [Speciale instellingen 1].
De afdrukken zijn grijsachtig Is bij te donker ingesteld? Wijzig de instelling zodat de dichtheid lichter is. Overzicht van menuopties Staat de printer bloot aan direct zonlicht of een sterke lichtbron? Installeer de printer op een geschikte locatie. Installatie De machine verplaatsen Is de tonercartridge lange tijd blootgesteld aan direct zonlicht? Bewaar de tonercartridge twee à drie uur op een geschikte locatie en probeer opnieuw af te drukken.
0R11-05L Het papier krult om of is gekreukeld Gekreukeld papier Is het papier goed geladen? Als de stapel papier hoger is dan de markering voor het maximale aantal vellen of schuin in de lade ligt, kunnen er kreukels of vouwen ontstaan. Papier plaatsen Gebruikt u papier dat vochtig is geweest? Gebruik nieuw papier dat helemaal droog is. Papier plaatsen Gebruikt u geschikt papier? Controleer het papier dat u kunt gebruiken en druk af met geschikt papier.
0R11-05R Papier wordt niet goed ingevoerd Afdrukken zijn scheef Zijn de papiergeleiders afgesteld op de randen van het papier? Als de papiergeleiders te los of te strak zitten, zijn de afdrukken scheef. Papier plaatsen Wordt het papier ingevoerd via de sleuf voor handmatige invoer? Plaats het papier in de papierlade. Papier in de papierlade plaatsen Drukt u af op omgekrulde enveloppen? Strijk de enveloppen glad en druk opnieuw af.
0R11-05S Wanneer een probleem niet kan worden opgelost Als u door het raadplegen van de informatie in dit hoofdstuk een probleem nog steeds niet kunt oplossen, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. BELANGRIJK Het is niet toegestaan het apparaat te demonteren of te repareren. Als u dat wel doet, bestaat de kans dat de garantie vervalt.
0R11-05U Onderhoud In dit hoofdstuk wordt het onderhoud van de machine beschreven, inclusief het reinigen van de machine en het initialiseren van instellingen.
0R11-05W Het apparaat reinigen Maak de machine regelmatig schoon om te voorkomen dat de afdrukkwaliteit afneemt en om de machine veilig en prettig te kunnen Onderhoud en inspecties gebruiken. Lees eerst de veiligheidsinstructies door voordat u aan de slag gaat.
0R11-05X Behuizing Wrijf de behuizing van het apparaat regelmatig schoon om het apparaat in goede conditie te houden. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd. 2 Ga als volgt te werk om de behuizing van het apparaat te reinigen. Gebruik een zachte doek die heel iets is bevochtigd met water of een mild reinigingsmiddel dat is verdund met water.
0R11-05Y Glasplaat Verwijder regelmatig stof van de glasplaat en de onderzijde van de klep van de glasplaat om vlekken op documenten of afdrukken te voorkomen. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd. 2 Open de klep van de glasplaat. 3 Reinig de glasplaat en de onderzijde van de klep van de glasplaat.
0R11-060 Fixeereenheid Er kan zich vuil verzamelen op de fixeereenheid in het apparaat, met zwarte strepen op afdrukken als gevolg. Voer de onderstaande procedure uit om de fixeereenheid te reinigen. U kunt de fixeereenheid niet reinigen als de wachtrij van het apparaat documenten bevat die nog moeten worden afgedrukt. Voor het reinigen van de fixeereenheid hebt u papier nodig dat groter is dan normaal A4- of LetterPapier laden in formaat.
0R11-061 De binnenkant van het apparaat Reinig de binnenkant van het apparaat regelmatig, zodat zich geen tonerpoeder of papierstof in het apparaat ophoopt. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd. 2 Zet het bedieningspaneel omhoog. Als u het bedieningspaneel niet omhoog kunt zetten Zorg dat de klep van glasplaat volledig is gesloten.
7 Sluit de tonerklep en laat het bedieningspaneel zakken. Als u de tonerklep niet kunt sluiten Controleer of de tonercartridge goed is ingebracht. Als u de klep forceert, kan deze beschadigd raken. 8 Steek de stekker weer in het stopcontact en schakel het apparaat in.
0R11-062 Tonercartridges vervangen U ziet een bericht op het display van de machine als een tonercartridge bijna leeg is. De afdrukkwaliteit neemt flink af als u dan gewoon blijft afdrukken zonder actie te ondernemen. U kunt het resterende tonerniveau controleren op het display.
Tonerniveau Hiermee wordt de resterende hoeveelheid toner aangegeven. Afhankelijk van de omgeving waarin uw apparaat staat, moeten andere interne onderdelen mogelijk worden vervangen voordat de toner op is.
0R11-063 Voordat u de tonercartridge vervangt Voer de volgende procedure uit voordat u de tonercartridge vervangt. Misschien wordt het bericht hierna niet meer weergegeven of is de Onderhoud en afdrukkwaliteit beter. Lees vóór u begint de instructies en waarschuwingen voor het hanteren van de tonercartridge. Verbruiksartikelen inspecties 1 Zet het bedieningspaneel omhoog. Als u het bedieningspaneel niet omhoog kunt zetten Zorg dat de klep van glasplaat volledig is gesloten.
Plaats de nokken aan de rechter- en linkerkant ( apparaat. 6 ) in de geulen voor de tonercartridge, en duw de cartridge volledig in het Sluit de tonerklep en laat het bedieningspaneel zakken. Als u de tonerklep niet kunt sluiten Controleer of de tonercartridge goed is ingebracht. Als u de klep forceert, kan deze beschadigd raken.
0R11-064 Tonercartridges vervangen Lees de veiligheidsvoorschriften in 1 Onderhoud en inspecties en Verbruiksartikelen voordat u tonercartridges gaat vervangen. Zet het bedieningspaneel omhoog. Als u het bedieningspaneel niet omhoog kunt zetten Zorg dat de klep van glasplaat volledig is gesloten. Als er een dik origineel zoals een boek op de glasplaat ligt, verwijdert u dit. Als u het bedieningspaneel forceert, kan het beschadigd raken.
6 Trek de afdichtingstape recht uit de cartridge. De afdichtingstape is ongeveer 50 cm lang. Het uittrekken van de afdichtingstape Als er tape achterblijft in een tonercartridge, kan dit gevolgen hebben voor de kwaliteit van afdrukken. Trek de afdichtingstape niet schuin of onder een hoek uit de cartridge. Als de tape scheurt, kunt u misschien niet meer alle tape verwijderen. Als de tape vast komt te zitten tijdens het verwijderen, blijf dan trekken aan de tape tot deze volledig is verwijderd.
0R11-065 De machine verplaatsen Het apparaat is zwaar. Volg altijd de onderstaande procedures als u het apparaat gaat verplaatsen om lichamelijk letsel te voorkomen. Belangrijke veiligheidsinstructies Lees ook altijd de veiligheidsvoorschriften voordat u aan de slag gaat. 1 Schakel het apparaat en de computer uit. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd.
0R11-066 Aantal afdrukken weergeven U kunt nagaan hoeveel pagina's in totaal voor afdrukken zijn gebruikt. Het totaal omvat lijsten, plus kopieën en afdrukken van gegevens vanaf computers.
0R11-067 Instellingen terugzetten op de standaardwaarden U kunt de volgende instellingen herstellen (initialiseren): Menu initialiseren Instellingen voor systeembeheer initialiseren Alle gegevens/instellingen initialiseren 㻞㻤㻥㻌㻛㻌㻟㻟㻤
0R11-068 Menu initialiseren U kunt de instellingen van de machine ( Overzicht van menuopties) terugzetten op de standaardwaarden. Als u de instellingen in en wilt herstellen, raadpleegt u voor systeembeheer initialiseren.
0R11-069 Instellingen voor systeembeheer initialiseren U kunt de instellingen van de machine ( Overzicht van menuopties) terugzetten op de standaardwaarden. Bij bepaalde instellingen moet de machine opnieuw worden opgestart om de standaardwaarden te herstellen.
0R11-06A Alle gegevens/instellingen initialiseren Als u alle geregistreerde gegevens en instellingen in één keer wilt wijzigen, bijvoorbeeld wanneer u de installatielocatie van het apparaat verandert, kunt u geregistreerde gegevens verwijderen en alle instellingen ( Overzicht van menuopties) tegelijk initialiseren. Nadat u alle gegevens/instellingen hebt geïnitialiseerd, moet u het apparaat opnieuw opstarten.
0R11-06C Bijlage Dit hoofdstuk bevat de technische specificaties van dit apparaat, instructies voor het gebruik van de e-Handleiding, disclaimers, auteursrechtinformatie en andere belangrijke informatie voor klanten.
0R11-06E Handige functies Het is zeker de moeite waard om de functies uit te proberen die in dit hoofdstuk worden beschreven. De functies zijn onderverdeeld in vier categorieën: "Milieubesparing levert geld op", "Efficiënter werken", "Digitaal is beter" en "Ongekende mogelijkheden".
0R11-06F Milieubesparing levert geld op Meerdere pagina's op één vel papier afdrukken Als u pas echt papier wilt besparen, drukt u meerdere pagina's af op één vel. Zo kunt u 2 of 4 pagina's kopiëren op één vel papier en maximaal 16 pagina's als u afdruktaken verstuurt vanaf uw computer.
0R11-06H Efficiënter werken Sneltoetsen voor het scannen Maak gebruik van de sneltoetsen op het bedieningspaneel, zodat u niet steeds dezelfde instellingen hoeft te configureren. * om automatisch te scannen naar vooraf ingestelde bestemmingen, scantypen en / Gebruik de toetsen bestandsindelingen. Plaats het document en druk op een van deze sneltoetsen om te scannen. * Als u de MF211 gebruikt, de enige sneltoets die beschikbaar is, is Documenten eenvoudig scannen: .
Voor meer informatie Een document afdrukken 㻞㻥㻣㻌㻛㻌㻟㻟㻤
0R11-06J Digitaal is beter Selectief scannen Waarom zou je een hele pagina van een krant scannen als je eigenlijk alleen maar geïnteresseerd bent in een kop en de bijbehorende foto? In zo'n situatie is ScanGear MF de ideale oplossing. Hiermee kunt u in een voorbeeld aangeven wat u wilt scannen, waarna de scanner zijn werk doet. Dit is eenvoudiger dan met een speciaal programma alle overbodige informatie te verwijderen.
Tekst wordt standaard gescand als een afbeelding, maar u kunt deze afbeelding ook converteren naar tekst die vervolgens kan worden bewerkt. Selecteer hiervoor "OCR" als het scantype wanneer u gaat scannen met MF Toolbox. De software die bij deze machine wordt geleverd, kan alle tekst in de gescande afbeelding converteren naar tekstgegevens die u kunt bewerken met een teksteditor. Zie Scannen met MF Toolbox voor meer informatie over deze functie.
0R11-06K Ongekende mogelijkheden Een smartphone/tablet gebruiken (MF212w) Wanneer u op weg bent naar een vergadering en een tablet gebruikt, kunt u met deze functie een voorstel waaraan u hebt gewerkt, foto's die met een smartphone zijn gemaakt, of handouts van een vergadering afdrukken of scannen.
Zie Posters afdrukken voor meer informatie over deze functie.
0R11-06L Technische specificaties De technische specificaties van het apparaat kunnen bij verbeteringen van het apparaat zonder vooraankondiging worden gewijzigd.
0R11-06R Apparaatspecificaties Type Persoonlijke desktop Elektrische aansluiting *1 220 tot 240 V, 50/60 Hz (De netspanningsvereisten kunnen per land verschillen. Controleer de spanning van het land waar u het apparaat hebt gekocht.
0R11-06S Specificaties draadloos LAN Standaard IEEE 802.11g, IEEE 802.11b, IEEE 802.11n Frequentiebereik 2.412 t/m 2.472 MHz IEEE 802.11g 6/9/12/18/24/36/48/54 Mbps Snelheid gegevensverzending IEEE 802.11b 1/2/5,5/11 Mbps IEEE 802.11n SGI Invalidated 20 MHz: 6,5/13/19,5/26/39/52/58,5/65 Mbps SGI Validated 20 MHz: 7,2/14,4/21,7/28,9/43,3/57,8/72,2 Mbps Communicatiemodus Infrastructuurmodus Beveiliging WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), 802.
0R11-06U Documenttype Ondersteunde documentsoorten Type Normaal papier/Zwaar papier/Foto/Kleine documenten (zoals indexkaarten)/Speciale papiersoorten (zoals calqueerpapier, transparanten, etc.
0R11-06W Scangebied De grijze gebieden in de onderstaande tabel geven het scangedeelte van het document aan. Zorg ervoor dat de tekst en afbeeldingen in uw documenten binnen het grijze gebied passen. Het scangedeelte verschilt naargelang de gebruikte functie en de plaats van de documenten. Kopiëren Het scangebied voor kopiëren kan verschillen van het afdrukgebied.
0R11-06X Papier Ondersteunde papierformaten Hieronder ziet u een overzicht van de papierformaten die u in de papierlade en de sleuf voor handmatige invoer kunt plaatsen.
Dik papier 105 tot 163 g/m² 100 vellen 1 vel 60 tot 80 g/m² 250 vellen 1 vel 80 tot 90 g/m² 170 vellen 1 vel 60 tot 80 g/m² 250 vellen 1 vel 80 tot 90 g/m² 170 vellen 1 vel 60 tot 163 g/m² 100 vellen 1 vel 50 vellen 1 vel 100 vellen 1 vel 20 vellen 1 vel Gerecycled papier Gekleurd papier Bond-papier Transparanten*1 Etiket Envelop *1 Gebruik speciale transparanten voor laserprinters.
0R11-06Y Specificaties van de kopieerfunctie Tekst/Foto (Snel) 300 x 600 dpi Scanresolutie Tekst/Foto, Foto, Tekst 600 x 600 dpi Uitvoerresolutie 600 x 600 dpi Zoompercentage 100% 1:1, Max. 400%, 200%, 141% A5->A4, 70% A4->A5, 50%, Min. 25% Kopieersnelheid* (A4 Normaal 1:1) Capaciteit continu kopiëren Tijd voor eerste kopie 23 kpm Maximaal 99 exemplaren maximaal 9 seconden (A4) * De kopieersnelheid op enkelzijdig bedrukt normaal papier van het formaat A4 wordt gemeten tijdens continu kopiëren.
0R11-070 Specificaties van de scannerfunctie Type Kleurenscanner Maximaal scanformaat Maximaal 216 x 297 mm Optische resolutie Tot 600 x 600 dpi Scanresolutie Stuurprogramma Softwarematige resolutie 9.600 x 9.600 dpi TWAIN WIA 1.0 (Windows XP) WIA 2.
0R11-071 Specificaties van de afdrukfunctie Capaciteit opvangblad *1 (een stapel nieuw papier van A4formaat) Afdruksnelheid *2 (A4 Normaal 1:1) Tijd eerste afdruk *3 Ongeveer 100 vellen (68 g/m²) 23 ppm maximaal 6 seconden (A4) Afdrukresolutie 600 dpi x 600 dpi (equivalent aan 1.200 dpi x 1.200 dpi) Gradatie 256 gradaties Tonercartridges Verbruiksartikelen *1 Is afhankelijk van de installatieomgeving en de gebruikte papiersoort.
0R11-072 Verbruiksartikelen Hier volgt een richtsnoer voor de geschatte levensduur van de verbruiksartikelen die in dit apparaat worden gebruikt. Schaf verbruiksartikelen aan bij uw plaatselijke, erkende Canon-dealer. Neem voorzorgsmaatregelen voor gezondheid en veiligheid in acht wanneer u verbruiksartikelen opslaat en hanteert (Verbruiksartikelen). Afhankelijk van de installatieomgeving, het papierformaat of het documenttype moet u verbruiksartikelen misschien eerder dan aangegeven vervangen.
0R11-073 Meegeleverde documentatie Het apparaat wordt geleverd met de volgende handleidingen. Raadpleeg deze handleidingen als u iets niet weet. Aan de slag Lees deze handleiding eerst. Er worden enkele basisprocedures beschreven, van het verwijderen van het verpakkingsmateriaal tot het installeren van het apparaat. e-Handleiding (deze handleiding) In deze handleiding worden alle functies van het apparaat beschreven. U kunt de handleiding weergeven in een webbrowser.
0R11-074 De e-Handleiding gebruiken De e-Handleiding is een handleiding die u op uw computer kunt bekijken en die alle functies van het apparaat beschrijft. U kunt zoeken op basis van uw bedoeld gebruik of een trefwoord invoeren om snel de pagina te vinden die u zoekt. U kunt de e-Handleiding gebruiken De e-Handleiding door deze op uw computer te installeren of door de e-Handleiding rechtstreeks vanaf de dvd-rom te starten.
0R11-075 De e-Handleiding installeren Installeer de e-Handleiding op uw computer vanaf de dvd-rom die bij de machine is geleverd. 1 Plaats de User Software and Manuals DVD-ROM (Dvd met gebruikerssoftware en handleidingen) in het cdrom-station van uw computer. Selecteer een taal en klik op [OK] als dat wordt gevraagd. Als het scherm [Installatie van softwareprogramma's/handleidingen] niet verschijnt, haalt u de dvd uit het station en plaatst u deze opnieuw.
5 Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan. 6 Selecteer de map waarin u wilt installeren en klik op [Installeren]. De installatie wordt gestart. U moet nu even wachten. Deze bewerking kan enige tijd duren. 7 Klik op [Afsluiten].
8 Klik op [Volgende] [Afsluiten]. De e-Handleiding weergeven Dubbelklik op het snelkoppelingspictogram van de e-Handleiding op het bureaublad. Als er een beveiligingswaarschuwing wordt weergegeven Klik op [Inhoud weergeven]. De e-Handleiding rechtstreeks vanaf de dvd-rom openen 1 Plaats de User Software and Manuals DVD-ROM (Dvd met gebruikerssoftware en handleidingen) in het cd-rom-station van uw computer. Selecteer een taal en klik op [OK] als dat wordt gevraagd.
geval is, geef dan toestemming om de inhoud in de webbrowser weer te geven.
0R11-076 De e-Handleiding verwijderen U kunt de e-Handleiding desgewenst van de computer verwijderen. 1 Plaats de User Software and Manuals DVD-ROM (Dvd met gebruikerssoftware en handleidingen) in het cdrom-station van uw computer. Selecteer een taal en klik op [OK] als dat wordt gevraagd. 2 Klik op [Start programma's]. Als het bovenstaande scherm niet wordt weergegeven, raadpleegt u softwareprogramma's/handleidingen] weergeven. 3 Klik op [Starten] voor [Handleiding verwijderen].
6 Klik op [Terug] [Afsluiten].
0R11-077 Lay-out van de e-Handleiding De e-Handleiding is opgesplitst in verschillende schermen en de inhoud van elk scherm varieert. Bovenste pagina Deze pagina wordt weergegeven als u de e-Handleiding start. Canon Klik hierop om naar de beginpagina van de handleiding te gaan. Tabblad [Inhoudsopgave]/Tabblad [Zoeken] Klik hierop om te schakelen tussen de inhoudsopgave en de zoekfunctie. Inhoudsopgave De hoofdstuktitels worden weergegeven ( ).
informatie. [Afdrukken] Klik hierop om de weergegeven inhoud af te drukken. Handige functies Verschillende praktijkvoorbeelden om het apparaat zo efficiënt mogelijk te gebruiken. Klik op / / / om praktijkvoorbeelden op categorie weer te geven. Klik op het bewegende beeld voor meer informatie over elke categorie. U kunt Handige functies het beeld stoppen door de aanwijzer erop te zetten. [Beknopte Help] Klik hierop als er onverwachts problemen zijn met het apparaat of als u dit wilt reinigen.
[Inhoudsopgave] De hoofdstukpictogrammen en -titels worden weergegeven. / Het tabblad [Inhoudsopgave] kan breder of smaller worden gemaakt. [Alles uitvouwen]/[Alles samenvouwen] Klik op [Alles uitvouwen] om alle subgedeelten van alle onderwerpen weer te geven. Klik op [Alles samenvouwen] om alle subgedeelten van alle onderwerpen te sluiten. Hoofdstukpictogrammen Klik op een hoofdstukpictogram om naar het begin van het overeenkomstige hoofdstuk te navigeren.
[Voer hier trefwoord(en) in] Typ hier een of meer trefwoorden en klik op om de zoekresultaten weer te geven in het zoekvenster ( ). [Zoekopties] Klik hierop om zoekopties in te stellen zoals het bereik van de zoekopdracht en jokertekens. Om de opties weer te geven, klikt u op deze knop wanneer die grijs is. Om de opties te verbergen, klikt u op deze knop wanneer die oranje is. Zoekbereik selecteren Hier kunt u het zoekbereik instellen.
Titel (Onderwerp) Geeft titels en onderwerpen weer. Klik op een titel of onderwerp om naar de pagina te gaan. Klik hierop om naar het begin van de pagina te gaan. / Klik hierop om naar het vorige of volgende hoofdstuk te gaan.
0R11-078 De e-Handleiding raadplegen Markeringen Waarschuwingen met betrekking tot veiligheid, beperkingen en waarschuwingen met betrekking tot de bediening van het apparaat, nuttige tips en andere informatie worden weergegeven met behulp van de onderstaande markeringen. Geeft een waarschuwing aan voor handelingen die lichamelijk letsel tot gevolg kunnen hebben als de handelingen niet juist worden uitgevoerd. Let altijd goed op deze waarschuwingen zodat u het apparaat veilig gebruikt.
0R11-079 Overige In deze bijlage worden basisbewerkingen van Windows beschreven. De bijlage bevat verder disclaimers, auteursrechtinformatie en andere belangrijke informatie.
0R11-07A Basisbewerkingen in Windows Het onderdeel [Computer] of [My Computer] (Deze computer) weergeven Windows XP Professional/Server 2003/Server 2003 R2 [Start] selecteer [My Computer] (Deze computer). Windows Vista/7/Server 2008/Server 2008 R2 [Start] selecteer [Computer]. Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm Windows 8.
Het scherm [Installatie van softwareprogramma's/handleidingen] weergeven Als het scherm [Installatie van softwareprogramma's/handleidingen] niet automatisch wordt weergegeven nadat u de dvd hebt geplaatst, volgt u de onderstaande procedure. De stationsnaam van de dvd-rom wordt aangeduid met "D:" in deze handleiding. De stationsletter van het dvd-romstation kan verschillen afhankelijk van de computer die u gebruikt. Windows XP/Server 2003/Server 2003 R2 1 [Start] 2 Typ "D:\Minst.exe" en klik op [OK].
4 Druk een testpagina af. Klik op het tabblad [General] (Algemeen). Klik op [Print Test Page] (Testpagina afdrukken) om een testpagina af te drukken. De bitarchitectuur controleren Als u niet zeker weet of op uw computer de 32-bits of 64-bits versie van Windows Vista/7/8/8.1/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2 wordt uitgevoerd, volgt u de onderstaande procedure. 1 Open het onderdeel [Control Panel] (Configuratiescherm).
De computernaam controleren Windows XP/Server 2003/Server 2003 R2 1 [Start] 2 Open het onderdeel [System] (Systeem). selecteer [Control Panel] (Configuratiescherm). Klik op [Performance and Maintenance] (Prestaties en onderhoud) [System] (Systeem). 3 Klik op het tabblad [Computer Name] (Computernaam) (of [Network ID] (Netwerk-ID)). 4 Klik op [Change] (Wijzigen) (of [Properties] (Eigenschappen)). Windows Vista/7/8/8.
1 2 3 Open de printermap. De printermap weergeven Klik met de rechtermuisknop op het printerpictogram en klik op [Printer Properties] (Eigenschappen van printer) (of [Properties] (Eigenschappen)). Controleer de poortinstellingen. Klik op het tabblad [Ports] (Poorten). Zorg dat de juiste poort is geselecteerd voor de printer.
0R11-07C Voor Mac OS-gebruikers Afhankelijk van de aankoopdatum hebt u mogelijk geen stuurprogramma voor Mac OS bij uw apparaat ontvangen. De stuurprogramma's worden naar de Canon-website geüpload wanneer ze nodig zijn. Controleer het besturingssysteem van uw computer en download het juiste stuurprogramma van de Canon-website. Raadpleeg de MF Driver Installation Guide voor informatie over het installeren en gebruiken van het stuurprogramma.
0R11-07E Kennisgeving Services en software van derden Software van derden (MF212w) Software van derden (MF211) EMC-voorwaarden van EU-richtlijn Dit apparaat voldoet aan de essentiële EMC-voorwaarden van de EU-richtlijn. Wij verklaren dat dit product voldoet aan de EMCvoorwaarden van de EU-richtlijn bij een nominale netspanning van 230 V, 50 Hz hoewel de nominale spanning van dit product 220-240 V, 50/60 Hz is.
Uitsluitend bestemd voor de Europese Unie en EER (Noorwegen, IJsland en Liechtenstein) Met deze symbolen wordt aangegeven dat dit product in overeenstemming met de AEEA-richtlijn (2012/19/EU), de richtlijn 2006/66/EG betreffende batterijen en accu's en/of de plaatselijk geldende wetgeving waarin deze richtlijnen zijn geïmplementeerd, niet bij het normale huisvuil mag worden weggegooid.
[Greek] ¡¢£¤¥¡ ¦§ ¨ £ ©£ª£ ¥«©©£¢¬§¡ ¢£ £«¥§¦ ¡ ¡¥ ¡ £ ª ¥¯ª ¦¡±³ ´¦µ¶¡ · Français [French] Par la présente, CANON INC. déclare que l'appareil AW-NM383 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente CANON INC.
ENIGE DIRECTE, INCIDENTELE OF SECUNDAIRE SCHADE VAN WELKE AARD DAN OOK, NOCH VOOR VERLIEZEN OF UITGAVEN ALS RESULTAAT VAN HET GEBRUIK VAN DIT MATERIAAL. Copyright Copyright CANON INC.
0R11-07F Contact opnemen CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC CANON SINGAPORE PTE LTD.
㻝㻌㻛㻌㻠㻤
Introductie 3 Informatie over de stuurprogramma's en de software 4 Ondersteunde besturingssystemen 5 Selecteren welk stuurprogramma moet worden geïnstalleerd 6 Installeren 8 Installeren vanaf de meegeleverde CD-ROM/DVD-ROM 9 Installeren na downloaden van de Canon website 21 Installatie om WSD te gebruiken 28 Verwijderen 33 Problemen oplossen 37 Bijlage 38 De installatiehandleiding gebruiken 39 Schermconfiguratie van de installatiegids 40 De installatiehandleiding bekijken 43 Overige 44 Basisbewerkingen in W
0L9R-000 Introductie In deze Installatiehandleiding wordt uitgelegd hoe u de MF-stuurprogramma's en MF Toolbox installeert en verwijdert. Systeemvereisten voor het installeren van de MF-stuurprogramma's of MF Toolbox ( Ondersteunde besturingssystemen). Installeren In dit gedeelte wordt uitgelegd hoe u de MF-stuurprogramma's en MF Toolbox installeert, om het apparaat gereed te maken voor Installeren afdrukken vanaf een computer.
0L9R-001 Informatie over de stuurprogramma's en de software Lees het volgende voordat u de MF-stuurprogramma's of andere software installeert. Het installatieproces varieert al naar gelang de verbindingsmethode en omgeving. MF-stuurprogramma's Printerstuurprogramma U kunt vanuit een toepassing afdrukken op het apparaat wanneer het printerstuurprogramma op uw computer is geïnstalleerd.
0L9R-002 Ondersteunde besturingssystemen Controleer aan de hand van de volgende tabel welke besturingssystemen ondersteuning bieden voor MF-stuurprogramma's en MF Toolbox. : Ondersteund : Niet ondersteund Windows XP Windows Vista/7/8/8.
0L9R-003 Selecteren welk stuurprogramma moet worden geïnstalleerd Voordat u de MF-stuurprogramma's installeert, dient u op het apparaat op te geven welk methode voor verbinding met de computer wordt gebruikt en welke soorten stuurprogramma's moeten worden gebruikt. Een model met een faxfunctie gebruiken Een model zonder faxfunctie gebruiken Een model met een faxfunctie gebruiken 1 Druk op 2 Tik op . 3 4 5 en tik op
4 5 Gebruik / om of te selecteren en druk op . Gebruik / om het gebruikte stuurprogramma te selecteren en druk op . Opties voor paginabeschrijvingstalen 6 Netwerk UFRII LT UFRII LT (XPS) USB UFRII LT UFRII LT (XPS) Start de machine opnieuw op. Als u bij stap 4 hebt geselecteerd, zet u de machine uit. Vervolgens wacht u minstens 10 seconden en zet u de machine weer aan.
0L9R-004 Installeren In dit gedeelte wordt uitgelegd hoe u de MF-stuurprogramma's en MF Toolbox installeert, om het apparaat gereed te maken voor afdrukken vanaf een computer. Installeren vanaf de meegeleverde CD-ROM/DVD-ROM Installeer de MF-stuurprogramma's en MF Toolbox vanaf de User Software and Manuals CD-ROM/DVD-ROM (Cd/Dvd met gebruikerssoftware en handleidingen) die bij het apparaat is geleverd.
0L9R-005 Installeren vanaf de meegeleverde CD-ROM/DVD-ROM Bij gebruik van Eenvoudige installatie moet u de stappen in de volgende volgorde uitvoeren: "Installeer de stuurprogramma's" "Installeer de software vanaf de bijgeleverde cd/dvd" "Installeer de e-Handleiding". Raadpleeg vóór u begint "Aan de slag" voor meer informatie over het verbinden van het apparaat en de computer.
Verbinding via bedraad/draadloos LAN Selecteer [Netwerkverbinding] en klik op [Volgende]. In Server 2003/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2 wordt dit scherm niet weergegeven. Ga naar de volgende procedure. 5 Klik op [Installeren]. 6 Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan.
7 Klik op [Volgende]. Als u het apparaat via een netwerk met een computer wilt verbinden, gaat u naar stap 8. Als u het apparaat via een USB-kabel met een computer wilt verbinden, gaat u naar stap 10. De stuurprogramma's worden geïnstalleerd. Klik in het volgende scherm op [Ja]. 8 Selecteer het apparaat en klik op [Volgende].
Als er geen apparaten worden weergegeven in [Apparatenlijst] Controleer de verbinding tussen de machine en de computer en de IP-adresinstellingen (Netwerkinstellingen weergeven (eHandleiding)), en klik op [Apparatenlijst bijwerken]. Als u het apparaat nog steeds niet ziet, doet u het volgende: klik op [Zoeken op IP-adres] typ het IP-adres dat op het apparaat is ingesteld [OK]. 9 Controleer de instellingen en klik op [Starten]. De stuurprogramma's worden geïnstalleerd. 10 Klik op [Afsluiten].
14 15 Volg de instructies op het scherm om de e-Handleiding te installeren. Lees de informatie in het volgende scherm zorgvuldig, selecteer [Accepteren] of [Niet accepteren] en klik op [Volgende]. Als u [Accepteren] selecteert, wordt Product Extended Survey Program geïnstalleerd. Product Extended Survey Program is een programma waarmee gedurende tien jaar elke maand basisinformatie over de installatie en het gebruik van de printer naar Canon wordt verstuurd.
Als u standaardsoftware en de e-Handleiding op de computer wilt installeren, klikt u op [Eenvoudige installatie]. Als het bovenstaande scherm niet wordt weergegeven, raadpleegt u weergeven. Het scherm [Installatie via cd-rom/dvd-rom] Als [Automatisch afspelen] wordt weergegeven, klikt u op [MInst.exe uitvoeren]. 4 Geef op hoe u het apparaat met de computer wilt verbinden. USB-verbinding Selecteer [USB-verbinding] en klik op [Volgende].
6 Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan. 7 Klik op [Volgende]. Als u het apparaat via een netwerk met een computer wilt verbinden, gaat u naar stap 8. Als u het apparaat via een USB-kabel met een computer wilt verbinden, gaat u naar stap 13. De stuurprogramma's worden geïnstalleerd. Klik in het volgende scherm op [Ja].
8 Selecteer het apparaat en klik op [Volgende]. Als er geen apparaten worden weergegeven in [Apparatenlijst] Controleer de verbinding tussen de machine en de computer en de IP-adresinstellingen (Netwerkinstellingen weergeven (eHandleiding)), en klik op [Apparatenlijst bijwerken]. Als u het apparaat nog steeds niet ziet, doet u het volgende: klik op [Zoeken op IP-adres] typ het IP-adres dat op het apparaat is ingesteld [OK]. 9 Selecteer de stuurprogramma's die u wilt installeren en klik op [Volgende].
[Printernaam]/[Naam faxapparaat] Wijzig de naam zo nodig. [Gebruiken als gedeelde printer]/[Gebruiken als gedeelde fax] Schakel dit selectievakje in als u het apparaat wilt delen (met de computer waarop u de installatie als printserver uitvoert). Een printserver instellen (e-Handleiding) [Gedeelde naam] Wijzig de gedeelde naam zo nodig.
15 16 17 Geef de doelmap voor het installatieproces op en klik op [Volgende]. Geef op aan welke map u een pictogram wilt toevoegen en klik op [Volgende]. Klik op [Starten]. De installatie van MF Toolbox wordt gestart. 18 19 20 21 Klik op [Afsluiten]. Volg de instructies op het scherm om Toner Status te installeren. Volg de instructies op het scherm om Presto! PageManager en de e-Handleiding te installeren.
De resultaten van de installatie controleren Als u wilt weten of de MF-stuurprogramma's, MF Toolbox, de e-Handleiding enzovoort goed zijn geïnstalleerd, controleert u of de pictogrammen worden weergegeven. Printerstuurprogramma Als het printerstuurprogramma goed is geïnstalleerd, verschijnt een pictogram voor de geïnstalleerde printer in de printermap ( De printermap weergeven).
Als het pictogram niet wordt weergegeven Verwijder de stuurprogramma's ( De MF-stuurprogramma's verwijderen) en herhaal de instelprocedure vanaf het begin. Andere software U kunt Presto! PageManager met [Aangepaste installatie] installeren. Als Presto! PageManager goed is geïnstalleerd, verschijnt het Presto! PageManager-pictogram op het bureaublad.
0L9R-006 Installeren na downloaden van de Canon website Installeer de MF-stuurprogramma's of MF Toolbox nadat u de nieuwste versie van de Canon-website hebt gedownload. MF-stuurprogramma's installeren MF Toolbox installeren De resultaten van de installatie controleren Als u het apparaat via een USB-kabel met een computer verbindt, dient u de software te installeren voordat u de kabel aansluit. Het apparaat wordt geleverd zonder USB-kabel. Zorg dat u er een bij de hand heeft.
8 9 10 Klik op [Volgende]. Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan. Geef op hoe u het apparaat met de computer wilt verbinden. USB-verbinding Selecteer [USB-verbinding] en klik op [Volgende]. De stuurprogramma's worden geïnstalleerd. Ga naar stap 17. Verbinding via bedraad/draadloos LAN Selecteer [Netwerkverbinding] en klik op [Volgende].
Klik in het volgende scherm op [Ja]. In Server 2003/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2 wordt dit scherm niet weergegeven. Ga naar de volgende procedure. 11 Selecteer het apparaat en klik op [Volgende]. Als er geen apparaten worden weergegeven in [Apparatenlijst] Controleer de verbinding tussen de machine en de computer en de IP-adresinstellingen (Netwerkinstellingen weergeven (eHandleiding)), en klik op [Apparatenlijst bijwerken].
Apparaatgegevens ophalen voor het gebruik van een printserver Schakel het selectievakje [Canon Driver Information Assist Service] in. 13 Selecteer de printerstuurprogramma's die u wilt installeren en klik op [Volgende]. 14 Geef informatie voor elk stuurprogramma op.
[Printernaam]/[Naam faxapparaat] Wijzig de naam zo nodig. [Gebruiken als gedeelde printer]/[Gebruiken als gedeelde fax] Schakel dit selectievakje in als u het apparaat wilt delen (met de computer waarop u de installatie als printserver uitvoert). Een printserver instellen (e-Handleiding) [Gedeelde naam] Wijzig de gedeelde naam zo nodig.
6 7 8 9 10 11 Klik op [Volgende]. Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan. Geef de doelmap voor het installatieproces op en klik op [Volgende]. Geef op aan welke map u een pictogram wilt toevoegen en klik op [Volgende]. Klik op [Starten]. Klik op [Afsluiten]. De resultaten van de installatie controleren Als u wilt weten of de MF-stuurprogramma's goed zijn geïnstalleerd, controleert u of de pictogrammen worden weergegeven.
Als het pictogram niet wordt weergegeven Verwijder de stuurprogramma's ( De MF-stuurprogramma's verwijderen) en herhaal de installatieprocedure vanaf het begin.
0L9R-007 Installatie om WSD te gebruiken Als u Windows Vista/7/8/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2 gebruikt, kunt u afdrukken met het WSD-protocol (Web Services on Devices). Als u WSD wilt gebruiken, installeert u eerst het printerstuurprogramma en voegt u vervolgens een netwerkprinter toe. MF-stuurprogramma's installeren Een netwerkprinter toevoegen MF-stuurprogramma's installeren 1 2 3 Meld u bij de computer aan met een administratoraccount. Open de printermap.
7 8 Klik op [Bladeren]. Geef de map op waarin de stuurprogramma's zijn opgeslagen, selecteer het INF-bestand en klik op [Openen]. Geef de map op waarin het printerstuurprogramma als volgt is opgenomen. 32-bits besturingssysteem [Driver]-mappen van de cd/dvd of het gedownloade bestand. Geef [dutch] op [32bit] 64-bits besturingssysteem [Driver]-mappen van de cd/dvd of het gedownloade bestand.
11 Wijzig de printernaam zo nodig en klik op [Volgende]. De installatie wordt gestart. 12 Selecteer [Deze printer niet delen] en klik op [Volgende]. Als u de printer wilt delen, geeft u instellingen voor delen op voor de printer die is toegevoegd met toevoegen. (Een printserver instellen (e-Handleiding)) 13 Klik op [Voltooien]. In de printermap wordt een pictogram voor de geïnstalleerde printer weergegeven.
Een netwerkprinter toevoegen 1 Open de netwerkmap. Windows Vista/Server 2008 selecteer [Netwerk]. [Starten] Windows 7/Server 2008 R2 [Computer] selecteer [Netwerk]. [Starten] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm Windows 8.1/Server 2012 R2 Klik met de rechtermuisknop op [Start] 2 [Verkenner] [Verkenner] selecteer [Netwerk]. selecteer [Netwerk]. Klik met de rechtermuisknop op het nieuw toegevoegde printerpictogram en klik op [Installeren].
rechtermuisknop en selecteert u [Apparaat verwijderen] of [Verwijderen] 㻟㻞㻌㻛㻌㻠㻤 klik op [Ja].
0L9R-008 Verwijderen Als u geïnstalleerde MF-stuurprogramma's, MF Toolbox of Product Extended Survey Program niet langer nodig hebt, kunt u deze software van uw computer verwijderen. De MF-stuurprogramma's verwijderen MF Toolbox verwijderen Product Extended Survey Program verwijderen Toner Status verwijderen De MF-stuurprogramma's verwijderen 1 2 3 Meld u bij de computer aan met een administratoraccount. Open het onderdeel [Programma's en onderdelen] of [Programma's installeren of verwijderen].
4 Klik op de knop [Verwijderen]. 5 Klik op [Ja]. De software wordt verwijderd. 6 Klik op [Afsluiten]. MF Toolbox verwijderen 1 2 Meld u bij de computer aan met een administratoraccount. Open het onderdeel [Programma's en onderdelen] of [Programma's installeren of verwijderen]. [Programma's en onderdelen] of [Programma's installeren of verwijderen].
3 Selecteer MF Toolbox en klik op [Verwijderen]. Het verwijderprogramma wordt gestart. 4 5 Klik op [Verwijderen]. Klik op [Opnieuw opstarten]. Product Extended Survey Program verwijderen 1 2 3 Meld u bij de computer aan met een administratoraccount. Geef [Programma's en onderdelen] of [Programma's installeren of verwijderen] weer. Weergave [Programma's en onderdelen] of [Programma's installeren of verwijderen].
Het verwijderprogramma wordt gestart. 4 5 Klik op [Verwijderen]. Klik op [OK].
0L9R-009 Problemen oplossen Het kan gebeuren dat er zich bij het installeren of verwijderen van de MF-stuurprogramma's en MF Toolbox problemen voordoen. Lees in dat geval de volgende gedeelten voordat u contact met Canon opneemt.
0L9R-00A Bijlage De Bijlage bevat informatie die u moet weten, bijvoorbeeld hoe u de Installatiehandleiding moet gebruiken, disclaimers en auteursrechtinformatie.
0L9R-00C De installatiehandleiding gebruiken De Installatiehandleiding is een handleiding die u op de computer kunt doornemen. Hierin wordt informatie over het installeren van stuurprogramma's gegeven. U kunt snel naar een bepaalde pagina gaan door de gewenste informatie te zoeken of trefwoorden in te voeren. De gewenste informatie opzoeken U kunt zoeken naar de gewenste pagina door de volgende drie methoden te gebruiken.
0L9R-00E Schermconfiguratie van de installatiegids De installatiehandleiding is opgesplitst in verschillende schermen en de inhoud van elk scherm varieert. Bovenste pagina Deze pagina wordt weergegeven als u de installatiehandleiding start. Canon-logo Klik hierop om naar de beginpagina van de handleiding te gaan vanaf een andere pagina. Tabblad [Inhoudsopgave]/Tabblad [Zoeken] Klik hierop om te schakelen tussen het tabblad [Inhoudsopgave] en het tabblad [Zoeken].
[Inhoudsopgave] Hoofdstukpictogrammen en onderwerptitels worden weergegeven op dit tabblad. / Het tabblad [Inhoudsopgave] kan breder of smaller worden gemaakt. [Alles uitvouwen]/[Alles samenvouwen] Klik op [Alles uitvouwen] om alle subgedeelten van alle onderwerpen weer te geven. Klik op [Alles samenvouwen] om alle subgedeelten van alle onderwerpen te sluiten. Hoofdstukpictogrammen Klik op een hoofdstukpictogram om naar het begin van het overeenkomstige hoofdstuk te navigeren.
[Voer hier trefwoord(en) in] Voer één of meerdere trefwoorden in en klik op om de zoekresultaten weer te geven in een resultatenlijst. U kunt een zin invoeren om pagina's te zoeken die alle woorden van de zin bevatten. Zet de zin tussen aanhalingstekens om de exacte zin te vinden. [Zoekopties] Klik om de zoekvoorwaarden te specificeren zoals het bereik van de zoekopdracht en hoofdlettergevoeligheid. Zoekbereik selecteren U kunt dit gebruiken om de individuele hoofdstukken te selecteren om te doorzoeken.
0L9R-00F De installatiehandleiding bekijken Markeringen Beperkingen en waarschuwingen met betrekking tot de bediening van het apparaat, nuttige tips en andere informatie worden weergegeven met behulp van de onderstaande markeringen. Hiermee worden bedieningsvereisten en -beperkingen aangeduid. Lees deze punten zorgvuldig door voor een juiste bediening van de printer en om schade aan de printer of eigendom te voorkomen. Hiermee wordt een uitleg van een handeling gegeven.
0L9R-00H Overige In deze bijlage worden basisbewerkingen van Windows beschreven. De bijlage bevat verder disclaimers, auteursrechtinformatie en andere belangrijke informatie.
0L9R-00J Basisbewerkingen in Windows De printermap weergeven Inschakelen [Netwerk detecteren] Het scherm [Installatie via cd-rom/dvd-rom] weergeven De bitarchitectuur controleren Weergave [Programma's en onderdelen] of [Programma's installeren of verwijderen]. Weergave [Apparaatbeheer] De printermap weergeven Windows XP Professional/Server 2003 [Starten] selecteer [Printers en faxapparaten].
[Start] typ "D:\MInst.exe" in [Programma's en bestanden zoeken] of [Zoekopdracht starten] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm Windows 8.1/Server 2012 R2 Klik met de rechtermuisknop op [Start] selecteer [Uitvoeren] selecteer [Uitvoeren] typ "D:\MInst.exe" druk op [ENTER] op het toetsenbord. typ "D:\MInst.exe" klik op [OK]. klik op [OK].
Weergave [Apparaatbeheer] Windows XP [Starten] [Configuratiescherm] [Prestaties en onderhoud] [Systeem] Windows Vista/7/Server 2008 R2 [Starten] [Configuratiescherm] [Hardware en geluiden] of [Hardware] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm [Apparaatbeheer]. Windows 8.
0L9R-00K Kennisgeving Disclaimer De informatie in dit document kan zonder voorafgaande kennisgeving worden gewijzigd. CANON INC. BIEDT GEEN ENKELE GARANTIE MET BETREKKING TOT DIT MATERIAAL, UITDRUKKELIJK NOCH STILZWIJGEND, BEHALVE ZOALS HIERIN GEBODEN, INCLUSIEF, EN ZONDER BEPERKINGEN DAARVAN, GARANTIES OP HET GEBIED VAN VERKOOPBAARHEID, GESCHIKTHEID VOOR EEN BEPAALD DOEL OF HET INBREUK MAKEN OP ENIG RECHT. CANON INC.