Windows Driver della stampante Generic Plus UFR II/LIPSLX Guida di installazione USRMA-2297-01 2018-02 it Copyright CANON INC.
Sommario Introduzione ...................................................................................................................................................... 2 Uso del manuale ....................................................................................................................................................... 3 Notazioni utilizzate nel manuale Esonero di responsabilità Copyright Marchi ........................................................................................
Stampa ................................................................................................................................................................. Stampa da un computer 78 .......................................................................................................................................... 79 Come consultare la guida ........................................................................................................................................
Introduzione Introduzione Introduzione ......................................................................................................................................................... 2 Uso del manuale .................................................................................................................................................... 3 Notazioni utilizzate nel manuale ....................................................................................................................
Introduzione Introduzione Uso del manuale(P. 3) Esonero di responsabilità(P. 5) Copyright(P. 6) Marchi(P.
Introduzione Uso del manuale In questa sezione sono indicate le informazioni necessarie per utilizzare questo manuale. Notazioni utilizzate nel manuale(P.
Introduzione Notazioni utilizzate nel manuale In questa sezione sono indicati i simboli e le impostazioni utilizzati nel presente manuale. Simboli utilizzati nel manuale In questo manuale le spiegazioni degli elementi e delle operazioni da seguire per l'uso del driver vengono indicate con i simboli seguenti. IMPORTANTE ● Indica requisiti e limitazioni relativi all'uso dell'apparecchio. Leggere attentamente queste informazioni per utilizzare correttamente il prodotto ed evitare di danneggiarlo.
Introduzione Esonero di responsabilità Le informazioni contenute nel presente documento sono soggette a modifiche senza preavviso. CANON INC. NON FORNISCE ALCUNA GARANZIA, IMPLICITA O ESPLICITA, RELATIVA AL PRESENTE MANUALE, AD ECCEZIONE DI QUANTO RIPORTATO, INCLUSE E SENZA ALCUNA LIMITAZIONE, LE GARANZIE DI VENDIBILITÀ, COMMERCIABILITÀ, IDONEITÀ PER UNO SCOPO SPECIFICO DI UTILIZZO O NON VIOLAZIONE. CANON INC.
Introduzione Copyright Copyright CANON INC. 2018 Nessuna parte di questa pubblicazione può essere riprodotta o trasmessa, trascritta o archiviata in un sistema di recupero, o tradotta in qualsiasi lingua o linguaggio elettronico in qualunque forma o con qualunque mezzo, elettronico, meccanico, magnetico, ottico, chimico, manuale, ecc., senza l'autorizzazione scritta di Canon Inc.
Introduzione Marchi Microsoft e Windows sono marchi o marchi registrati di Microsoft Corporation negli Stati Uniti e/o in altri paesi. macOS è un marchio di Apple Inc. Altri prodotti e nomi di società contenuti nella presente possono essere marchi di proprietà delle rispettive società.
Informazioni sul driver Informazioni sul driver Informazioni sul driver ...................................................................................................................................
Informazioni sul driver Informazioni sul driver Questo driver generico per stampanti supporta varie periferiche. È possibile utilizzare lo stesso driver per tutti i modelli di stampante modificando le impostazioni relative alla porta di stampa e alle informazioni sulla periferica. Caratteristiche ● Le informazioni relative alle funzioni e alle opzioni della periferica vengono definite collettivamente in un "profilo di configurazione".
Informazioni sul driver Argomenti correlati Impostazione delle informazioni sulla periferica(P. 52) Importazione di un profilo di configurazione(P.
Prima dell'utilizzo Prima dell'utilizzo Prima dell'utilizzo ............................................................................................................................................
Prima dell'utilizzo Prima dell'utilizzo ● Il driver del software più recente è a disposizione sul sito Web di Canon. Controllare il sistema operativo e altre caratteristiche, quindi scaricare il software appropriato secondo le necessità. Sito mondiale Canon: http://www.canon.com/ ● Le funzioni disponibili possono variare in base alle condizioni indicate di seguito.
Controllo pre-installazione Controllo pre-installazione Controllo pre-installazione ......................................................................................................................... 14 Requisiti di sistema ............................................................................................................................................. 15 Note e avvisi relativi all'installazione ...............................................................................................
Controllo pre-installazione Controllo pre-installazione Di seguito sono indicati i dati da verificare preliminarmente per una corretta installazione del driver. Requisiti di sistema(P. 15) Note e avvisi relativi all'installazione(P. 17) Informazioni sul file Leggimi(P.
Controllo pre-installazione Requisiti di sistema È possibile utilizzare questo driver nei seguenti sistemi e ambienti. Sistemi operativi Windows 7/8.1/10 Windows Server 2008/2008 R2/2012/2012 R2/2016 Per ambienti informatici basati su server: Sistemi operativi in un ambiente server: Windows Server 2008/2008 R2/2012/2012 R2/2016 Componenti server: Citrix Presentation Server 4.5 Citrix XenApp 5.0/6.0/6.5/7.5/7.6/7.7/7.8/7.9/7.11/7.12 Citrix XenDesktop 4.0/5.0/5.5/5.6/7.0/7.1/7.5/7.6/7.7/7.8/7.9/7.11/7.
Controllo pre-installazione Garanzia di funzionamento: combinazioni Installazione con lingua corrispondente a quella del sistema operativo Lingua del sistema operativo inclusa tra le lingue del driver supportate Lingua del sistema operativo non inclusa tra le lingue del driver supportate Garantito -- Installazione con lingua non corrispondente a quella Garantito*1 del sistema operativo Non garantito*2 Impostata una lingua non corrispondente a quella del sistema operativo dopo l'installazione Non g
Controllo pre-installazione Note e avvisi relativi all'installazione Durante l'installazione, prestare attenzione alle seguenti voci. ● Se viene visualizzata una schermata in cui viene chiesta l'autorizzazione ad apportare modifiche al computer, accettare. ● Se viene visualizzata una schermata di Sicurezza di Windows che indica che non è possibile verificare l'autore del driver, consentire l'installazione.
Controllo pre-installazione Informazioni sul file Leggimi Il file Leggimi contiene limitazioni e precauzioni da osservare durante l'installazione o l'utilizzo dei driver. Il file Leggimi è memorizzato con il nome riportato di seguito nella cartella del pacchetto del driver: Readme_it-IT.hta Inoltre, se si procede all'installazione utilizzando il programma, è possibile consultare il file Leggimi nella schermata per la selezione di [Configurazione stampante].
Installazione del driver Installazione del driver Installazione del driver ................................................................................................................................. 20 Installazione mediante rilevamento delle periferiche in una rete .................................................................. 21 Installazione specificando una porta o un indirizzo IP .....................................................................................
Installazione del driver Installazione del driver Selezionare il metodo di installazione adatto al metodo di connessione e all'ambiente della periferica in uso. Installazione mediante rilevamento delle periferiche in una rete(P. 21) Installazione specificando una porta o un indirizzo IP(P. 26) Installazione mediante una connessione USB(P. 31) Installazione specificando un file inf(P. 35) Installazione mediante l'uso di una porta WSD(P. 37) Installazione di un collegamento al manuale online(P.
Installazione del driver Installazione mediante rilevamento delle periferiche in una rete Durante l'installazione del driver è possibile cercare le periferiche su reti TCP/IP. Nel corso dell'installazione, vengono impostati automaticamente il profilo di configurazione e le funzioni della periferica corrispondenti al modello di stampante. È anche possibile modificare o importare un profilo di configurazione se necessario.
Installazione del driver - Se il file [MInst.exe] di cui sopra non esiste: eseguire [Setup.exe] nella cartella del driver sul CD-ROM. 2 Selezionare una lingua → fare clic su [Avanti]. 3 Leggere il CONTRATTO DI LICENZA D'USO DI SOFTWARE CANON → fare clic su [Sì]. 4 Selezionare [Standard] → fare clic su [Avanti]. [Riattiva stampanti in modalità di attesa ed esegui ricerca]: selezionare questa opzione per rilevare nella rete le periferiche in modalità di attesa.
Installazione del driver 6 Selezionare la periferica da installare da [Elenco stampanti]. [Periferiche IPv4]/[Periferiche IPv6]/[Periferiche WSD]: è possibile passare da una schermata all'altra facendo clic sulle schede. Se la periferica non è visualizzata in [Elenco stampanti], fare clic su [Ripeti ricerca]. Se la periferica non viene ancora visualizzata dopo la nuova ricerca, selezionare [Personalizzata] ed eseguire l'installazione specificando una porta o un indirizzo IP.
Installazione del driver 8 Modificare [Nome stampante] → fare clic su [Avanti]. [Profilo di configurazione] > [Modifica]: fare clic su questa impostazione solo se è necessario modificare o importare un profilo di configurazione. Fare clic sulla successiva "Visualizza dettagli" ed eseguire le operazioni necessarie. Selezionare un profilo di configurazione. In caso di selezione manuale del profilo di configurazione: Selezionare un profilo di configurazione da [Profilo di configurazione] → fare clic su [OK].
Installazione del driver 9 Selezionare [Elenco stampanti per l'installazione del driver] → fare clic su [Avvia]. [Seleziona stampanti da aggiornare]: fare clic quando sono presenti stampanti che non è necessario aggiornare. Procedere con l'installazione secondo le istruzioni riportate sullo schermo. 10 Fare clic su [Riavvia] o [Esci]. Se non è possibile acquisire le informazioni sulla periferica durante l'installazione, impostarle prima della stampa.
Installazione del driver Installazione specificando una porta o un indirizzo IP È possibile specificare manualmente la porta o l'indirizzo IP da utilizzare per le periferiche collegate in rete o in locale e installare il driver. Utilizzare questa procedura per completare l'installazione quando non si riesce a rilevare automaticamente una periferica sulla rete o quando sono richieste impostazioni specifiche.
Installazione del driver 3 Leggere il CONTRATTO DI LICENZA D'USO DI SOFTWARE CANON → fare clic su [Sì]. 4 Selezionare [Personalizzata] → fare clic su [Avanti]. 5 Se viene visualizzata la seguente schermata, selezionare [Aggiungi nuove stampanti] → fare clic su [Avanti]. [Aggiorna driver di stampa esistenti]: Selezionare se si desiderano aggiornare solo i driver.
Installazione del driver 6 Impostare la porta.
Installazione del driver (1) Fare clic su [Aggiungi porta] → selezionare [Standard TCP/IP Port] da [Porta da aggiungere] → fare clic su [OK]. (2) Immettere il nome o l'indirizzo IP della periferica secondo le istruzioni riportate nella procedura guidata. [Nome porta] viene immesso automaticamente. Se necessario, modificare il nome della porta. Se viene visualizzata la schermata [Ulteriori informazioni sulla porta necessarie], fare clic su "Visualizza dettagli" ed effettuare le necessarie operazioni.
Installazione del driver 8 Selezionare [Elenco stampanti per l'installazione del driver] → fare clic su [Avvia]. Procedere con l'installazione secondo le istruzioni riportate sullo schermo. 9 Fare clic su [Riavvia] o [Esci]. Se non è possibile acquisire le informazioni sulla periferica durante l'installazione, impostarle prima della stampa. È anche possibile modificare o importare il profilo di configurazione simultaneamente. Argomenti correlati Installazione come server di stampa(P.
Installazione del driver Installazione mediante una connessione USB È possibile collegare la periferica e il computer con un cavo USB e installare il driver. Nel corso dell'installazione, viene automaticamente impostato il profilo di configurazione corrispondente al modello di stampante. È anche possibile modificare o importare un profilo di configurazione se necessario. Prerequisiti ● Requisiti di sistema(P.
Installazione del driver 5 6 Selezionare [Connessione USB] → fare clic su [Avanti]. Quando viene visualizzata la seguente schermata, collegare la periferica e il computer con un cavo USB → accendere la periferica. [Ignora]: se la connessione mediante USB è corretta, in questa schermata è possibile completare l'installazione senza dover attendere il completamento automatico.
Installazione del driver Procedere con l'installazione secondo le istruzioni riportate sullo schermo. Se l'installazione nella schermata precedente non riesce, fare clic su "Visualizza dettagli" ed effettuare le necessarie operazioni. Reinstallare il driver dopo aver eseguito la procedura seguente. (1) Connettere la periferica e il computer con un cavo USB → accendere la periferica. (2) Visualizzare [Gestione dispositivi]. In Windows 10/Server 2016 ] → fare clic su [Gestione dispositivi].
Installazione del driver In caso di selezione manuale di un profilo di configurazione: Selezionare un profilo di configurazione da [Profilo di configurazione] → fare clic su [OK]. In caso di importazione di un profilo di configurazione: Fare clic su [Importa] → selezionare un file di profilo di configurazione (*.typ) → fare clic su [OK].
Installazione del driver Installazione specificando un file inf È possibile installare un driver specificando un file inf mediante la funzione per l'aggiunta delle stampanti di Windows. La spiegazione riguarderà l'installazione con una porta TCP/IP standard. Prerequisiti ● Requisiti di sistema(P. 15) ● Confermare l'indirizzo IP della periferica. ● Preparare il file inf. Acquisire il driver dal sito Web Canon (http://www.canon.com/) o dal CD-ROM fornito e preparare il file inf.
Installazione del driver In Windows 10/Server 2016 Fare clic con il pulsante destro del mouse su [ ] → fare clic su [Gestione dispositivi]. In Windows 7/Server 2008 R2/8.1/Server 2012/Server 2012 R2 Visualizzare [Pannello di controllo] > [Hardware e suoni] > [Gestione dispositivi]. In Windows Server 2008 Visualizzare [Pannello di controllo] > [Sistema e manutenzione] > [Gestione dispositivi].
Installazione del driver Installazione mediante l'uso di una porta WSD In questa sezione è spiegata la procedura per ricercare periferiche in una rete da Windows mediante l'uso di una porta WSD (Web Services on Devices) e installare il driver. IMPORTANTE ● Se si esegue l'installazione mediante una porta WSD, non è possibile utilizzare la funzione di acquisizione delle informazioni sulla periferica. ● Se si desidera installare più driver, condividere una porta standard TCP/IP.
Installazione del driver Installazione di un collegamento al manuale online Di seguito è spiegata la procedura per l'installazione di un collegamento al sito Web in cui sono disponibili i manuali online dei prodotti Canon. 1 Inserire il CD-ROM fornito nel computer. 2 Fare clic su [Installazione]. Se il menu del CD-ROM non viene visualizzato fare clic su "Visualizza dettagli". Avviare il programma di installazione attenendosi alla procedura indicata.
Modifica delle impostazioni in base all'ambiente d'uso Modifica delle impostazioni in base all'ambiente d'uso Modifica delle impostazioni in base all'ambiente d'uso ............................................................ 40 Utilizzo di una stampante condivisa .................................................................................................................. 41 Installazione come server di stampa ............................................................................................
Modifica delle impostazioni in base all'ambiente d'uso Modifica delle impostazioni in base all'ambiente d'uso In questa sezione vengono spiegate le impostazioni della stampante condivisa e il passaggio ad una porta differente. Utilizzo di una stampante condivisa(P. 41) Modifica della porta(P.
Modifica delle impostazioni in base all'ambiente d'uso Utilizzo di una stampante condivisa In questa sezione viene fornita una spiegazione della procedura di configurazione per la condivisione di una periferica con computer sulla medesima rete. Installazione come server di stampa(P. 42) Configurazione di client di una stampante condivisa(P.
Modifica delle impostazioni in base all'ambiente d'uso Installazione come server di stampa In questa sezione viene spiegato come configurare le impostazioni di condivisione e installare il driver per utilizzare un computer collegato alla periferica come server di stampa. Prerequisiti ● All'avvio del computer, eseguire l'accesso come membro di Administrators. ● Viene visualizzata la schermata [Desktop] (quando si utilizza Windows 8.1/Server 2012/Server 2012 R2).
Modifica delle impostazioni in base all'ambiente d'uso 5 Attenersi alle istruzioni riportate sullo schermo → fare clic su [Esci]. Argomenti correlati Installazione mediante rilevamento delle periferiche in una rete(P. 21) Installazione specificando una porta o un indirizzo IP(P. 26) Configurazione di client di una stampante condivisa(P.
Modifica delle impostazioni in base all'ambiente d'uso Configurazione di client di una stampante condivisa In questa sezione è spiegata la procedura per l'attivazione della stampa da un computer client (in seguito denominato "un client") mediante un server di stampa sulla stessa rete. Negli ambienti in cui può essere utilizzato Windows Update, non è necessario utilizzare il programma di installazione per installare il driver più recente quando si seleziona un server di stampa.
Modifica delle impostazioni in base all'ambiente d'uso Argomenti correlati Installazione come server di stampa(P. 42) Aggiornamento del driver(P.
Modifica delle impostazioni in base all'ambiente d'uso Modifica della porta In questa sezione è spiegata la procedura per la modifica della porta utilizzata da una periferica connessa a una rete. Se durante l'installazione del driver è stata temporaneamente impostata una porta per la periferica, effettuare le seguenti operazioni per modificarla nella porta corretta. In questa sezione viene illustrato il metodo per la creazione di una porta RAW o LPR utilizzando una porta TCP/IP standard.
Modifica delle impostazioni in base all'ambiente d'uso Quando si utilizza una porta esistente: Selezionare una porta da [Porta]. Quando si aggiunge una porta TCP/IP standard: (1) Fare clic su [Aggiungi porta] → selezionare [Standard TCP/IP Port] da [Tipi di porte disponibili] → fare clic su [Nuova porta]. (2) Immettere il nome o l'indirizzo IP della periferica secondo le istruzioni riportate nella procedura guidata. [Nome porta] viene immesso automaticamente. Se necessario, modificare il nome della porta.
Modifica delle impostazioni in base all'ambiente d'uso 5 Configurare la porta. Quando si utilizza RAW: Selezionare [Raw] per [Protocollo] → fare clic su [OK]. Quando si utilizza LPR: (1) Selezionare [LPR] per [Protocollo] → specificare una delle seguenti code di stampa per [Impostazioni LPR] > [Nome coda]. LP: stampa secondo l'impostazione di spooling della periferica. Questa è l'impostazione utilizzata normalmente.
Modifica delle impostazioni in base all'ambiente d'uso 6 Fare clic su [Chiudi].
Come rendere utilizzabili le funzioni della periferica Come rendere utilizzabili le funzioni della periferica Come rendere utilizzabili le funzioni della periferica ................................................................. 51 Impostazione delle informazioni sulla periferica .............................................................................................. 52 Impostazioni delle funzioni della periferica .....................................................................................
Come rendere utilizzabili le funzioni della periferica Come rendere utilizzabili le funzioni della periferica Impostazione delle informazioni sulla periferica(P. 52) Impostazioni delle funzioni della periferica(P. 57) Impostazioni dell'alimentazione carta e delle destinazioni di stampa(P. 58) Importazione di un profilo di configurazione(P.
Come rendere utilizzabili le funzioni della periferica Impostazione delle informazioni sulla periferica In questa sezione è spiegata la procedura per impostare le opzioni installate sulla periferica ed è indicato come rendere utilizzabili le funzioni esclusive nella periferica. Innanzitutto applicare al driver il profilo di configurazione corrispondente al modello di stampante e modificare le impostazioni nella scheda [Impostazioni periferica].
Come rendere utilizzabili le funzioni della periferica 2 Fare clic con il pulsante destro del mouse sull'icona della periferica da impostare → selezionare [Proprietà stampante] dal menu visualizzato. Se si utilizza il driver con più modelli di periferica, scegliere il modello da impostare dopo aver selezionato [Proprietà stampante]. 3 4 Visualizzare la scheda [Impostazioni periferica].
Come rendere utilizzabili le funzioni della periferica IMPORTANTE ● Se non è stato selezionato un profilo di configurazione adatto alla periferica in uso, le informazioni relative a quest'ultima potrebbero non essere applicate in modo corretto e alcune delle sue funzioni potrebbero non essere utilizzabili. Selezionare un profilo di configurazione adatto per visualizzare le impostazioni richieste nella scheda [Impostazioni periferica].
Come rendere utilizzabili le funzioni della periferica 6 Verificare che [Informazioni periferica] sia impostato su [Auto] → fare clic su [OK]. Se [Informazioni periferica] è impostato su [Auto], vengono acquisite le informazioni sulla periferica e vengono impostate automaticamente le informazioni sulla funzione e sulle opzioni della periferica.
Come rendere utilizzabili le funzioni della periferica NOTA ● Anche se è possibile utilizzare la funzione di acquisizione delle informazioni sulla periferica, alcune informazioni sulla periferica devono essere impostate manualmente. Per i dettagli fare riferimento alla spiegazione delle impostazioni delle funzioni della periferica. ● Nei casi seguenti esiste la possibilità che alcune informazioni sulla periferica non vengano acquisite. In tal caso, impostare le opzioni manualmente.
Come rendere utilizzabili le funzioni della periferica Impostazioni delle funzioni della periferica In questa sezione sono spiegate le funzioni che vengono impostate automaticamente con l'acquisizione delle informazioni sulla periferica e le funzioni che devono essere impostate manualmente perché non è possibile acquisire le relative informazioni. NOTA ● Quando ci si connette mediante TCP/IP o rete IPP, le informazioni sulla periferica possono essere acquisite solo dal driver.
Come rendere utilizzabili le funzioni della periferica Impostazioni dell'alimentazione carta e delle destinazioni di stampa In questa sezione è spiegato l'abbinamento tra le impostazioni del driver e le opzioni di alimentazione carta e delle destinazioni di stampa. Fare riferimento alle impostazioni della periferica del profilo di configurazione selezionato per [Profilo config.] nella scheda [Impostazioni periferica]. Se è selezionata l'opzione [Configurazione di base] per [Profilo config.
Come rendere utilizzabili le funzioni della periferica Finestra di dialogo [Alimentazione carta] [Alimentazione carta standard] A-1 [Cassetto x 1] [Cassetto opzionale] B-1 [Cassetto x 1] B-2 [Cassetto x 2] B-3 [Cassetto x 3] B-4 [Cassetto x 4] [Deck opzionale] C-1 [Unità Paper Deck] D [Vassoio busta] iR-ADV Impostazioni dell'alimentazione carta Finestra di dialogo [Alimentazione carta] [Alimentazione carta standard] A-1 [Cassetto x 1] A-2 [Cassetto x 2] A-3 [Deck x 2 + Cassetto x 2] 59
[Cassetto opzionale] B-1 [Cassetto x 1] B-2 [Cassetto x 2] B-3 [Cassetto x 3] B-4 [Unità di alimentazione cassetto 1] B-5 [Unità di alimentazione cassetto 2] B-6 [Unità di alimentazione cassetto 3] B-7 [Unità di alimentazione cassetto ad alta capacità] [Deck opzionale] C-1 [Unità Paper Deck] C-2 [Deck POD leggero] C-3 [Paper Deck cassetto multiplo] [Inseritore] D-1 [Unità di inserimento documento (vassoio x 2)] D-2 [Inseritore di unità di piegatura fogli/Unità di inserimento documento (vassoio x 1)] E [I
Come rendere utilizzabili le funzioni della periferica [Deck opzionale] B-1 [Unità Paper Deck] B-2 [Deck POD leggero] B-3 [Paper Deck cassetto multiplo] [Inseritore] C-1 [Document Insertion Unit] C-2 [Unità di inserimento documento (vassoio x 2)] C-3 [Inseritore di unità di piegatura fogli/Unità di inserimento documento (vassoio x 1)] Impostazioni delle destinazioni di stampa Finestra di dialogo [Impostazioni uscita carta] Vassoio Finisher A-1 [Vassoio Finisher 1] A-2 [Vassoio Finisher 2] A-3 [Vassoio F
Come rendere utilizzabili le funzioni della periferica imagePRESS Impostazioni dell'alimentazione carta Finestra di dialogo [Alimentazione carta] [Alimentazione carta standard] A-1 [Cassetto x 3] A-2 [Deck x 1] A-3 [Deck x 2] [Deck opzionale] B-1 [Deck POD leggero] B-2 [Deck POD] B-3 [Deck POD + Deck POD secondario] B-4 [Deck POD + Deck POD secondario x 2] B-5 [Paper Deck cassetto multiplo] [Inseritore] C-1 [Document Insertion Unit] C-2 [Unità di inserimento documento (vassoio x 2)] C-3 [Unità di inseri
Come rendere utilizzabili le funzioni della periferica D [Inseritori di rilegatore a colla] E [Vassoio multiuso] Impostazioni delle destinazioni di stampa Finestra di dialogo [Impostazioni uscita carta] Vassoio Finisher A-1 [Vassoio Finisher 1] A-2 [Vassoio Finisher 2] A-3 [Vassoio Finisher 1 [No fascicolazione]] A-4 [Vassoio Finisher 1 [iPR C7010VP/6010]] A-5 [Vassoio Finisher 2 [iPR C7010VP/6010]] Fascicolatore B-1 [Fascicolatore a [Pila]] B-2 [Fascicolatore b [Pila]] B-3 [Fascicolatore a [Vassoio di
Come rendere utilizzabili le funzioni della periferica B-7 [Fascicolatore a [Vassoio di uscita] [iPR C7010VP/6010]] B-8 [Fascicolatore b [Vassoio di uscita] [iPR C7010VP/6010]] Stampanti All-in-One Impostazioni dell'alimentazione carta Finestra di dialogo [Alimentazione carta] [Alimentazione carta standard] A-1 [Cassetto x 1] A-2 [Cassetto x 2] [Cassetto opzionale] B-1 [Cassetto x 1] B-2 [Cassetto x 2] B-3 [Cassetto x 3] B-4 [Unità di alimentazione cassetto 1] B-5 [Unità di alimentazione cassetto 2] B-6
Come rendere utilizzabili le funzioni della periferica Impostazioni delle destinazioni di stampa Finestra di dialogo [Impostazioni uscita carta] A-1 [Vassoio copia] A-2 [Vassoio Finisher interno] A-3 [Vassoio Finisher interno aggiuntivo] A-4 [Vassoio interno 1] A-5 [Vassoio interno 2] 66
Come rendere utilizzabili le funzioni della periferica Importazione di un profilo di configurazione In questa sezione è spiegata la procedura per l'importazione del file di un profilo di configurazione esportato (*.typ) e l'impostazione delle informazioni sulla periferica. Se non è possibile acquisire le informazioni sulla periferica, è possibile applicarle importando un profilo di configurazione esportato da un ambiente nel quale l'acquisizione delle informazioni è possibile.
Come rendere utilizzabili le funzioni della periferica 4 Selezionare [Seleziona manualmente] → fare clic su [ configurazione).
Come rendere utilizzabili le funzioni della periferica 5 Selezionare il file del profilo di configurazione da importare → fare clic su [Apri]. 6 Fare clic su [OK] → fare clic su [OK] nella scheda [Impostazioni periferica].
Aggiornamento/Disinstallazione del driver Aggiornamento/Disinstallazione del driver Aggiornamento/Disinstallazione del driver ..................................................................................... 71 Aggiornamento del driver .................................................................................................................................. 72 Disinstallazione del driver .............................................................................................................
Aggiornamento/Disinstallazione del driver Aggiornamento/Disinstallazione del driver In questa sezione vengono illustrati i metodi di aggiornamento e disinstallazione del driver. Viene inoltre presentata la procedura per disinstallare il collegamento al manuale online. Aggiornamento del driver(P. 72) Disinstallazione del driver(P. 74) Disinstallazione di un collegamento al manuale online(P.
Aggiornamento/Disinstallazione del driver Aggiornamento del driver È possibile aggiornare i driver installati alle rispettive versioni più recenti. È consigliabile scaricare i driver più recenti corrispondenti ai nuovi sistemi operativi e/o funzioni e aggiornarli. È possibile aggiornare i driver già installati mentre si procede all'installazione di un driver per una nuova periferica; in questa sezione, tuttavia, viene illustrata solo la procedura per l'aggiornamento dei driver installati.
Aggiornamento/Disinstallazione del driver 4 Selezionare [Elenco stampanti per l'installazione del driver] → fare clic su [Avvia]. Se sono presenti periferiche delle quali non si desidera aggiornare i driver, fare clic su [Seleziona stampanti da aggiornare] → deselezionare le periferiche da [Elenco stampanti] → fare clic su [OK]. 5 Fare clic su [Esci]. Riavviare il computer quando viene visualizzato un messaggio in cui si richiede di effettuare questa operazione.
Aggiornamento/Disinstallazione del driver Disinstallazione del driver In questa sezione viene illustrato come disinstallare un driver che non è più necessario. Sono disponibili due metodi: avvio del programma di disinstallazione da Windows e utilizzo del programma di disinstallazione disponibile nel CD-ROM in dotazione oppure nella cartella del driver scaricato. Prerequisiti ● All'avvio del computer, eseguire l'accesso come membro di Administrators.
Aggiornamento/Disinstallazione del driver 3 Nella schermata di conferma dell'eliminazione della stampante, fare clic su [Sì]. È possibile che venga visualizzato un messaggio di conferma in cui viene chiesto se si desidera eliminare anche il pacchetto del driver. 4 Nella schermata [Elimina stampante] fare clic su [Esci].
Aggiornamento/Disinstallazione del driver Disinstallazione di un collegamento al manuale online In questa sezione viene spiegata la procedura per la disinstallazione di un collegamento al sito Web in cui sono disponibili i manuali online dei prodotti Canon, che è stato creato con il CD-ROM fornito. 1 Inserire il CD-ROM fornito nel computer. 2 Fare clic su [Avvia programmi software]. Se il menu del CD-ROM non viene visualizzato fare clic su "Visualizza dettagli".
Stampa Stampa Stampa ................................................................................................................................................................... 78 Stampa da un computer ..................................................................................................................................... 79 Come consultare la guida ...................................................................................................................................
Stampa Stampa In questa sezione sono spiegate le procedure per le operazioni di stampa basilari. Per i dettagli sull'utilizzo del driver, consultare la guida. Stampa da un computer(P. 79) Come consultare la guida(P.
Stampa Stampa da un computer In questa sezione vengono illustrate le procedure di base per configurare le impostazioni del driver della stampante. NOTA ● Quando si utilizza una periferica collegata tramite una porta WSD, attivare [Utilizzo WSD] sulla periferica. 1 2 Selezionare [Stampa] dal menu dell'applicazione. Nella schermata di stampa, selezionare la periferica in uso → fare clic su [Preferenze], [Proprietà stampante] o [Proprietà].
Stampa 3 Nella schermata delle impostazioni di stampa del driver, impostare gli elementi necessari. Se necessario, passare ad altre schede e configurare le impostazioni pertinenti.
Stampa NOTA ● Se la funzione che si desidera utilizzare non è visualizzata nella schermata delle impostazioni di stampa, configurare le impostazioni di stampa dopo aver attivato le funzioni della periferica recuperando le informazioni sulla periferica e così via. 4 Fare clic su [OK]. 5 Nella schermata di stampa, fare clic su [Stampa] o su [OK]. Argomenti correlati Informazioni sul driver(P. 9) Impostazione delle informazioni sulla periferica(P. 52) Come consultare la guida(P.
Stampa Come consultare la guida Per informazioni dettagliate sull'uso del driver e di ciascuna funzione, consultare la guida. Per visualizzare la guida, fare clic su [?] nella schermata delle impostazioni di stampa del driver.
Risoluzione dei problemi Risoluzione dei problemi Risoluzione dei problemi ............................................................................................................................. 84 Impossibile rilevare una periferica connessa tramite una porta WSD ............................................................
Risoluzione dei problemi Risoluzione dei problemi In questa sezione vengono spiegate le soluzioni a problemi comuni. Impossibile rilevare una periferica connessa tramite una porta WSD(P.
Risoluzione dei problemi Impossibile rilevare una periferica connessa tramite una porta WSD Questo problema può essere attribuito a varie cause. Modificare le impostazioni secondo necessità per ogni tipo di "Soluzione". Causa 1. Le impostazioni della periferica non sono corrette. Soluzione Verificare se le seguenti opzioni sono state impostate sulla periferica. Se non sono state impostate, modificare le impostazioni o installare il driver corretto.
Risoluzione dei problemi Argomenti correlati Installazione mediante l'uso di una porta WSD(P. 37) Disinstallazione del driver(P.
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.