㻝㻌㻛㻌㻢㻤㻠
Belangrijke veiligheidsinstructies Installatie Elektrische aansluiting Hantering Onderhoud en inspecties Verbruiksartikelen Het apparaat instellen Inhoud van de verpakking controleren Verpakkingsmateriaal verwijderen Tonercartridges voorbereiden Papier plaatsen De handset installeren (optioneel) (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Het netsnoer aansluiten Het apparaat inschakelen en de begininstellingen opgeven Verbinding met een computer Verbinding maken via een draadloos LAN (Alleen de MF8580Cdw /
Bestemmingen opslaan als favorieten Meerdere bestemmingen opslaan voor groepskiezen Het volume aanpassen De slaapstand instellen De automatische uitschakeltijd instellen (Alleen de MF8540Cdn / MF8230Cn) Kopiëren Basisbewerkingen voor kopiëren Kopieerpapier selecteren Kopiëren annuleren Verschillende kopieerinstellingen Vergroten of verkleinen Documenttype selecteren Dichtheid aanpassen Kleurbalans aanpassen Scherpte aanpassen Dubbelzijdig kopiëren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Meerdere docum
Faxen verzenden vanaf een computer Een voorblad toevoegen aan faxen die u verstuurt vanaf een pc Het adresboek gebruiken Bestemmingen opslaan Opgeslagen bestemmingen gebruiken Adresboekgegevens importeren en exporteren De machine als printer gebruiken Afdrukken vanaf een computer Een document afdrukken Afdrukken annuleren Afdrukstatus en logboeken controleren Verschillende afdrukinstellingen Vergroten of verkleinen Schakelen tussen enkelzijdig en dubbelzijdig afdrukken (Alleen de MF8580Cdw / MF8550Cdn / MF8
Scaninstellingen configureren in de eenvoudige modus Scaninstellingen configureren in de geavanceerde modus Eenvoudig scannen met een apparaatgebaseerde bewerking Documenten rechtstreeks scannen naar een USB-geheugen Documenten rechtstreeks vanaf het apparaat verzenden als e-mailberichten (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Documenten rechtstreeks opslaan in een gedeelde map (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Het verzenden van documenten annuleren (E-mail/Gedeelde map) (Alleen de MF8580
Basisinstellingen voor e-mail configureren 364 Geavanceerde instellingen voor e-mail configureren 368 De machine configureren voor het scannen naar gedeelde mappen 371 Een gedeelde map instellen als een opslaglocatie 372 De machine configureren voor uw netwerkomgeving 376 Ethernet-instellingen configureren 377 De maximale verzendeenheid wijzigen 379 Een wachttijd instellen voor verbinding met een netwerk 380 DNS configureren 381 SMB configureren 385 WINS configureren 387 LDAP-servers registreren (Alleen de
Menuopties instellen via de UI op afstand Geregistreerde gegevens opslaan/laden Het adresboek opslaan of laden (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Instellingen opslaan/laden Adresboek wijzigen via de UI op afstand (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Overzicht van menuopties Netwerkinstellingen Voorkeuren Tijdklokinstellingen Algemene instellingen Kopieerinstellingen Faxinstellingen (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Scaninstellingen Inst.
TX-resultaatrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Communicatiebeheerrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) RX-resultaatrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Afdelings-ID beheerrapport Adresboeklijst (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Lijst gebruikersgegevens / Gegevenslijst systeembeheer IPSec-beleidslijst PCL-lettertypelijst (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Aantal afdrukken weergeven Instellingen terugzet
0CSC-000 Belangrijke veiligheidsinstructies De informatie in dit hoofdstuk is bedoeld om beschadiging van eigendommen te voorkomen, evenals lichamelijk letsel van gebruikers van het apparaat en anderen in de buurt van het apparaat. Lees deze informatie zorgvuldig door voordat u het apparaat gaat gebruiken en volg de instructies om het apparaat op de juiste manier te gebruiken. U mag alleen handelingen uitvoeren die in deze handleiding worden beschreven.
0CSC-001 Installatie U kunt dit apparaat alleen veilig en prettig gebruiken als u de volgende voorschriften volgt en het apparaat op een geschikte locatie installeert. (In deze handleiding worden de aanduidingen "apparaat" en "machine" door elkaar gebruikt om naar het product te verwijzen.
Voorkom slecht geventileerde locaties Dit apparaat genereert bij normaal gebruik een hele kleine hoeveelheid ozon, enzovoort. Hoewel de gevoeligheid voor ozon, enzovoort kan variëren, zijn deze hoeveelheden niet schadelijk. De aanwezigheid van ozon, enzovoort kan beter merkbaar zijn bij langer gebruik of tijdens lange productieruns, met name in slecht geventileerde ruimtes.
0CSC-002 Elektrische aansluiting Dit apparaat kan worden gebruikt met een spanning tussen 220 tot 240 V, en een elektrische frequentie van 50/60 Hz. Gebruik alleen een voeding die voldoet aan de aangegeven spanningsvereisten. Als u dat niet doet, kan dit brand of een elektrische schok tot gevolg hebben. Gebruik uitsluitend het netsnoer dat bij het apparaat is geleverd, om brand of een elektrische schok te voorkomen.
0CSC-003 Hantering Haal direct de stekker uit het stopcontact en neem contact op met een erkend Canondealer als het apparaat vreemde geluiden maakt, rook of een vreemde geur verspreidt of extreem heet wordt. Als u het apparaat onder die omstandigheden blijft gebruiken, kan dit brand of een elektrische schok tot gevolg hebben. Het is niet toegestaan het apparaat te demonteren of aan te passen.
Dit apparaat is geclassificeerd als Klasse 1 Laser volgens de normen IEC 60825-1: 2007, EN60825-1: 2007. De laserstraal kan schadelijk zijn voor het menselijk lichaam. De laserstraal wordt in de eenheid van de laserscanner afgedekt met een klep en er is dus geen gevaar dat de laserstraal ontsnapt bij een normale werking van het apparaat. Lees de volgende opmerkingen en instructies voor een veilig gebruik. Open alleen de kleppen die expliciet in deze handleiding worden genoemd.
0CSC-004 Onderhoud en inspecties Reinig het apparaat regelmatig. Als er sprake is van stofvorming, werkt de machine mogelijk niet goed. Let op de volgende punten als u Problemen oplossen als er tijdens gebruik een probleem optreedt. Zie Wanneer een probleem de machine gaat reinigen. Zie niet kan worden opgelost als u het probleem niet kunt oplossen of wanneer u van mening bent dat de machine moet worden geïnspecteerd. Schakel het apparaat uit en haal de stekker uit het stopcontact voordat u gaat reinigen.
0CSC-005 Verbruiksartikelen Gooi lege tonercartridges niet in open vuur. Bewaar tonercartridges of papier niet op een plek die wordt blootgesteld aan open vuur. Hierdoor kan de toner ontbranden, met brandwonden of brand als gevolg. Als u per ongeluk toner morst, veeg het tonerpoeder dan op met een zachte, vochtige doek zonder het in te ademen. Gebruik nooit een stofzuiger zonder bescherming tegen stofexplosies om de gemorste toner op te ruimen.
Tonercartridge bewaren Bewaar tonercartridges onder de volgende omstandigheden om een veilige werking en een goed resultaat te garanderen. Geschikt temperatuurbereik voor opslag: 0 tot 35°C Geschikt luchtvochtigheidsbereik voor opslag: 35 tot 85% relatieve luchtvochtigheid (geen condensvorming) * Bewaar tonercartridges gesloten totdat deze in het apparaat worden geplaatst.
0CSC-006 Het apparaat instellen Volg stappen 1 - 9 hieronder om het apparaat in te stellen. Als u meer wilt weten over een bepaalde stap, klikt u op de koppeling om naar het desbetreffende gedeelte te gaan.
Stap 9 Begininstellingen configureren voor faxfuncties (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) 㻝㻥㻌㻛㻌㻢㻤㻠
0CSC-007 Inhoud van de verpakking controleren Als een onderdeel ontbreekt of beschadigd is, neemt u contact op met een erkende Canon-servicemonteur of de klantenservice van Canon.
Alleen de MF8280Cw / MF8230Cn User Software CD (cd met gebruikerssoftware) Multi-lingual User Manual CD (cd met meertalige gebruikershandleiding) OPMERKINGEN De inhoud van de verpakking kan per land of regio verschillen. Er wordt geen USB-kabel, LAN-kabel of router bij het apparaat geleverd. U moet zelf zorgen voor deze onderdelen. Gebruik alleen een USB-kabel met het volgende symbool.
De User Software CD (cd met gebruikerssoftware) De User Software CD (cd met gebruikerssoftware) bevat verschillende stuurprogramma's, tools en andere nuttige software. Installeer de onderdelen die u nodig denkt te hebben. MFstuurprogramma's De printerstuurprogramma's, het faxstuurprogramma (alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) en het scannerstuurprogramma, plus MF Network Scan Utility (MF Netwerkscanprogramma) voor het scannen van documenten over een netwerk.
0CSC-008 Verpakkingsmateriaal verwijderen Lees eerst de veiligheidsvoorschriften in Installatie en Hantering. Breng de machine vervolgens naar de plek waar u deze wilt installeren en verwijder alle oranje tape en het verpakkingsmateriaal. Het is mogelijk dat de vorm en locatie van het verpakkingsmateriaal dat hier wordt beschreven niet overeenkomen met het materiaal dat is gebruikt voor het verpakken van uw machine. Het verpakkingsmateriaal kan namelijk zonder vooraankondiging worden gewijzigd.
Gebruik de handgrepen aan weerszijden van het apparaat en draag het apparaat met minimaal twee mensen. MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 3 Open de achterklep volledig. MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 4 Verwijder de tape en het verpakkingsmateriaal.
5 6 Sluit de achterklep. Open de documentinvoer. 7 Verwijder de tape en het verpakkingsmateriaal. 8 Sluit de documentinvoer voorzichtig. OPMERKING Zorg dat u al het verpakkingsmateriaal van het apparaat hebt verwijderd.
0CSC-009 Tonercartridges voorbereiden De machine wordt geleverd met geïnstalleerde tonercartridges. U moet de tape verwijderen van de cartridges om de machine te kunnen Onderhoud en inspecties en Verbruiksartikelen voordat u de tonercartridges gaat gebruiken. Lees de veiligheidsvoorschriften in voorbereiden. 1 Open de klep aan de voorzijde. 2 Trek de lade met de tonercartridges naar buiten.
5 Sluit de klep aan de voorzijde. OPMERKING Zorg ervoor dat alle vier de strips met afdichtingstape zijn verwijderd uit het apparaat.
0CSC-00A Papier plaatsen In dit gedeelte wordt beschreven hoe u papier van A4-formaat in de papierlade plaatst. Lees de veiligheidsvoorschriften in en inspecties voordat u papier gaat plaatsen. Onderhoud BELANGRIJK Als u papier laadt met een ander formaat dan A4 Er verschijnt automatisch een configuratiescherm wanneer u het apparaat de eerste keer inschakelt. Volg de aanwijzingen om papier te plaatsen. U kunt op dit moment alleen papier van A4-formaat laden.
4 Schuif de papiergeleiders tegen de randen van het papier. Druk op de ontgrendelingspal en schuif de papiergeleiders naar binnen totdat ze stevig tegen de randen van het papier zitten. BELANGRIJK: Schuif de papiergeleiders stevig tegen de randen van het papier. Als de papiergeleiders te los of juist te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan. 5 » Schuif de papierlade in de machine.
0CSC-00C De handset installeren (optioneel) (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Bevestig de optionele handset aan de machine. U hebt hiervoor de onderstaande onderdelen nodig. 1 Verwijder de twee beschermkapjes. 2 Steek de pluggen met pinnen in de daarvoor bestemde gaatjes in de houder. OPMERKING: Duw de pinnen nog niet helemaal in de pluggen. 3 Steek de pluggen (met de houder) in de gaatjes op het apparaat. 4 Duw de pinnen voorzichtig zo ver mogelijk in de pluggen.
6 Sluit de kabel van de handset aan op de handsetaansluiting. 7 Bevestig de vier klemmen van de handsetkabel. 8 Voer de kabel van de handset door de klemmen en sluit de klemmen.
0CSC-00E Het netsnoer aansluiten Sluit het netsnoer aan op de machine. Lees de veiligheidsvoorschriften in Elektrische aansluiting voordat u het netsnoer aansluit. OPMERKING Sluit de USB-kabel nog niet aan. Wacht totdat u de software hebt geïnstalleerd om de USB-kabel aan te sluiten. 1 Controleer of het apparaat is uitgeschakeld. 2 Steek het ene uiteinde van het netsnoer in de aansluiting op de achterzijde van het apparaat. 3 Steek de stekker van het netsnoer in een geaard stopcontact.
0CSC-00F Het apparaat inschakelen en de begininstellingen opgeven Zet het apparaat aan en volg de aanwijzingen op het scherm om de begininstellingen te configureren. 1 Zet de machine aan. 2 Druk op / om de gewenste weergavetaal te selecteren en druk op 3 Druk op / om uw land of regio te selecteren en druk op 4 Lees de berichten en druk op als alles in orde is. . . OPMERKING: Als het bericht
7 Gebruik / om aan te geven of de kleurcorrectie al dan niet moet worden uitgevoerd en druk op . Als u kleurcorrectie inschakelt, kunt u kopieën en afdrukken maken waarvan de kleuren en dichtheid nog beter overeenkomen met die van het oorspronkelijke document. Het toepassen van kleurcorrectie duurt ongeveer 2 tot 4 minuten. Kleurcorrectie kan later worden uitgevoerd. Kleurcorrectie uitvoeren 1 Controleer of het papier dat is geladen overeenkomt met het formaat en het type op het scherm en druk .
Hebt u de correctieafbeelding met de afdrukzijde naar beneden en met de zwarte streep aan de achterzijde van het apparaat op de glasplaat gelegd? Is er papier vastgelopen? Papierstoringen verhelpen Als u nogmaals kleurcorrectie wilt uitvoeren Volg de instructies op het scherm totdat het scherm dat rechts wordt getoond in stap 8 wordt weergegeven en voer de kleurcorrectie opnieuw uit. Afb. kopiëren aanpassen 8 » » Bevestig dat een van de schermen die hier worden getoond, wordt weergegeven.
0CSC-00H Verbinding met een computer Als u de machine wilt verbinden met een computer, kunt u kiezen voor verbinding via een draadloos LAN, een bekabeld LAN of USB. Selecteer de methode die het beste past bij uw omgeving en apparaten. Verbinding maken via een draadloos LAN (Alleen de MF8580Cdw / MF8280Cw) Er is geen LAN-kabel nodig omdat draadloze communicatie (radiogolven) wordt gebruikt om het apparaat en de router met elkaar te verbinden. / om te selecteren en drukt u op .
Als het onderstaande scherm wordt weergegeven, gaat u verder naar Verbinding maken via USB. OPMERKING Er wordt geen LAN-kabel of router bij het apparaat geleverd. U moet zelf zorgen voor deze onderdelen. Raadpleeg de handleiding van de router of neem contact op met uw fabrikant als u niet zeker weet of de router waarmee u werkt draadloos LAN of bekabeld LAN ondersteunt.
0CSC-00J Verbinding maken via een draadloos LAN (Alleen de MF8580Cdw / MF8280Cw) Het apparaat en de computer worden met elkaar verbonden via een draadloze LAN-router. Er is geen LAN-kabel nodig omdat draadloze communicatie (radiogolven) wordt gebruikt om het apparaat en de router met elkaar te verbinden. OPMERKING Er wordt geen draadloze LAN-router bij het apparaat geleverd. U moet zelf zorgen voor dit onderdeel. De draadloze router moet voldoen aan IEEE 802.
OPMERKING: Als er geen scherm van UI op afstand wordt weergegeven Controleer of het apparaat op de juiste manier via een draadloos LAN is verbonden met de computer. Problemen met installatie/instellingen 5 Installeer de software. Installeer de MF-stuurprogramma's, MF Toolbox en de andere meegeleverde software. Zie de Installatiehandleiding MFstuurprogramma voor meer informatie.
0CSC-00K Verbinding maken via een bekabeld LAN Het apparaat en de computer worden met elkaar verbonden via een bekabelde LAN-router. Sluit de machine met een LAN-kabel aan op de router. OPMERKING Er wordt geen LAN-kabel of router bij het apparaat geleverd. U moet zelf zorgen voor deze onderdelen. Gebruik een twistedpair-kabel van categorie 5 of hoger voor het LAN. Controleer of er poorten op de router beschikbaar zijn om het apparaat en de computer aan te sluiten.
OPMERKING: Als er geen scherm van UI op afstand wordt weergegeven Controleer of het apparaat, de computer en de router correct verbonden zijn via LAN-kabels en het IP-adres Problemen met installatie/instellingen correct is ingesteld. 5 Installeer de software. Installeer de MF-stuurprogramma's, MF Toolbox en de andere meegeleverde software. Zie de Installatiehandleiding MFstuurprogramma voor meer informatie.
0CSC-00L Verbinding maken via USB Installeer de software en gebruik vervolgens een USB-kabel om het apparaat op de computer aan te sluiten. Er wordt geen USB-kabel bij het apparaat geleverd. U moet zelf zorgen voor een kabel. 1 Installeer de software. Installeer de MF-stuurprogramma's, MF Toolbox en de andere meegeleverde software. Zie de Installatiehandleiding MFstuurprogramma voor meer informatie. 2 Verwijder de beschermkap van de USB-poort aan de achterzijde van het apparaat.
0CSC-00R Begininstellingen configureren voor faxfuncties (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Volg stappen 1 - 4 hieronder om de faxinstellingen te configureren. Bepaal eerst welke ontvangstmodus het best aansluit bij uw situatie en volg dan de aanwijzingen op het scherm om de bijbehorende instellingen te configureren. Als u meer wilt weten over een bepaalde stap, klikt u op de koppeling om naar het desbetreffende gedeelte te gaan.
0CSC-00S Bepalen welke faxontvangstmodus u wilt gebruiken U kunt de faxinstellingen pas configureren als u hebt bepaald welke ontvangstmodus het best aansluit bij het beoogde gebruik.
0CSC-00U Het faxnummer en de naam van het apparaat registreren Registreer het faxnummer en de naam van het apparaat. Deze gegevens worden afgedrukt aan het begin van pagina's die u verstuurt. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . OPMERKING: Als u selecteert, wordt de ontvangstmodus ingesteld op .
» Ga verder met De ontvangstmodus selecteren KOPPELINGEN Faxen verzenden 㻠㻢㻌㻛㻌㻢㻤㻠
0CSC-00W De ontvangstmodus selecteren Selecteer vooraf de ontvangstmodus die het best aansluit bij het beoogde gebruik ( gebruiken). Bepalen welke faxontvangstmodus u wilt OPMERKING Als u eerder hebt geselecteerd in het faxconfiguratiescherm ( Het faxnummer en de naam van het om dat scherm weer te geven. apparaat registreren), drukt u op 1 Druk op .
» Ga verder met De telefoonlijn aansluiten KOPPELINGEN Faxen ontvangen 㻠㻤㻌㻛㻌㻢㻤㻠
0CSC-00X De telefoonlijn aansluiten Sluit de telefoonlijn aan op het apparaat. OPMERKING Als u eerder hebt geselecteerd in het faxconfiguratiescherm ( Het faxnummer en de naam van het om dat scherm weer te geven. apparaat registreren), drukt u op 1 Druk op . Een van de onderstaande schermen wordt weergegeven nadat de ontvangstmodus is ingesteld ( selecteren). 2 De ontvangstmodus Sluit de telefoonlijn aan op het apparaat.
OPMERKING: Als u een externe telefoon met faxfuncties aansluit, moet u de telefoon instellen voor het handmatig ontvangen van faxen. 3 4 Druk op als u de telefoonlijn hebt aangesloten. Druk op / om te selecteren en druk vervolgens op 5 Druk op . 6 Start de machine opnieuw op. . Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Als u de machine opnieuw opstart, wordt het type telefoonlijn automatisch ingesteld.
Installatie Faxen verzenden Faxen ontvangen 㻡㻝㻌㻛㻌㻢㻤㻠
0CSC-00Y Basishandelingen In dit hoofdstuk worden de basishandelingen beschreven, zoals het gebruiken van het bedieningspaneel of het plaatsen van het papier en de documenten. Het gaat hier om handelingen die vaak worden uitgevoerd om de functies van het apparaat te gebruiken. Onderdelen en de bijbehorende functies In dit gedeelte wordt aandacht besteed aan de externe en interne onderdelen van het apparaat en hun functie.
Opslaan in het adresboek In dit gedeelte wordt beschreven hoe u bestemmingen opslaat voor het verzenden van faxen of gescande documenten. adresboek (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Opslaan in het Het volume aanpassen In dit gedeelte wordt uitgelegd hoe u het volume van de verschillende systeemgeluiden kunt aanpassen, bijvoorbeeld van het geluid dat Het volume aanpassen u hoort als het verzenden van een fax is voltooid of als er een fout is opgetreden.
0CSC-010 Onderdelen en de bijbehorende functies In dit gedeelte worden de onderdelen van de machine beschreven (buitenzijde, voorzijde, achterzijde en binnenzijde), evenals de functie die ze hebben. Naast de onderdelen van de machine die nodig zijn voor het uitvoeren van basishandelingen zoals het plaatsen van documenten, het laden van papier en het vervangen van tonercartridges, wordt hier ook aandacht besteed aan de toetsen op het bedieningspaneel en het display.
0CSC-011 Voorzijde MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Documentinvoer Hiermee worden documenten automatisch in de machine gevoerd om te worden gescand. Als u twee of meer vellen in de invoer plaatst, worden deze achter elkaar gescand. Documenten plaatsen Bedieningspaneel Het bedieningspaneel bevat toetsen zoals de numerieke toetsen en de [Start]-toets, een display en statuslampjes. U kunt hier alle bewerkingen uitvoeren en instellingen opgeven.
Uitvoerlade Afdrukken worden uitgevoerd via de uitvoerlade. Transportgeleider voor handmatige invoer Laat de transportgeleider voor handmatige invoer zakken wanneer er papier is vastgelopen in de sleuf voor handmatige invoer. Papierstoringen verhelpen Glasplaat Leg documenten die u wilt scannen op de glasplaat. Gebruik de glasplaat ook voor dikke of ingebonden documenten, zoals boeken, als deze niet in de invoer passen.
0CSC-012 Achterzijde MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Aansluiting voor handset (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Hier sluit u de optionele handset aan. MF8280Cw) De handset installeren (optioneel) (Alleen de MF8580Cdw / MF8550Cdn / USB-poort Hier kunt u een USB-kabel aansluiten om de machine te verbinden met een computer. Verbinding maken via USB LAN-poort Hier kunt u een LAN-kabel aansluiten om de machine te verbinden met een bekabelde LAN-router, etc.
0CSC-013 Binnenzijde MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Lade met tonercartridges Hier installeert u de tonercartridges. Plaats de gele (Y), magenta (M), cyaan (C) en zwarte (K) tonercartridges in de sleuven in de lade, waarbij u achteraan begint.
0CSC-014 Sleuf voor handmatige invoer MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Papiergeleiders Stel de papiergeleiders exact af op de breedte van het geladen papier, zodat het papier mooi recht in de machine wordt gevoerd. Papierlade (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Trek de papierlade uit als u papier gaat plaatsen. Uitschuifblad (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Open het uitschuifstuk van de lade als u groot papier gaat plaatsen.
0CSC-015 Papierlade MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Papiergeleiders Stel de papiergeleiders exact af op de grootte van het geladen papier, zodat het papier mooi recht in het apparaat wordt gevoerd. Druk op de ontgrendelingspallen die in de afbeeldingen met pijlen worden aangegeven om de geleiders te ontgrendelen, zodat u deze kunt verschuiven.
0CSC-016 Bedieningspaneel OPMERKING Het bedieningspaneel hierboven is het paneel van de MF8580Cdw. De beschikbare toetsen of functies zijn afhankelijk van het model. Functietoetsen Druk op één van deze toetsen om te kopiëren, te faxen, te scannen of af te drukken vanaf een USB-geheugenapparaat. De faxfunctie is alleen beschikbaar op de MF8580Cdw / MF8550Cdn / MF8280Cw. Display [Reset]-toets Druk op deze toets om de wijzigingen te annuleren en de eerder opgegeven instellingen te herstellen.
Druk tijdens het wijzigen van de waarde voor een instelling op deze toets om de waarde te verhogen. [ ]-toets Druk tijdens het opgeven van instellingen op deze toets om naar het volgende scherm te gaan. Druk tijdens het invoeren van tekst op deze toets om de cursor naar rechts te verplaatsen. Druk op de toets om het geluidsvolume of de waarde voor een instelling te verhogen, zoals de dichtheid voor scannen, kopiëren, enzovoort.
[Stop]-toets Druk op deze toets om het kopiëren, faxen en andere bewerkingen te annuleren. [#]-toets Druk op deze toets om symbolen in te voeren, zoals "@" of "/". [Start] (Kleur)-toets Druk hierop om documenten in kleur te scannen of te kopiëren. Als u op deze toets drukt wanneer u afbeeldingen gaat afdrukken vanaf een USB-geheugenapparaat, worden er kleurenafdrukken gemaakt. [Start] (Zwart-wit)-toets Druk hierop om documenten in zwart-wit te scannen of te kopiëren.
0CSC-017 Sneltoetsen Met de sneltoetsen aan de rechterkant van het bedieningspaneel kunt u bepaalde bewerkingen eenvoudiger en sneller uitvoeren. Met de sneltoetsen kunt u gescande afbeeldingen opslaan op een computer of de hoeveelheid papier beperken wanneer u kopieën gaat maken. [Scan > PC1]/[Scan > PC2]-toets Gebruik deze toetsen om zo eenvoudig mogelijk te scannen.
0CSC-018 Display Op het display worden schermen weergegeven voor kopiëren, scannen en andere functies, plus de schermen voor het opgeven van instellingen voor deze functies. U kunt het display ook gebruiken om foutberichten en de communicatiestatus van het apparaat te bekijken. Hoofdscherm Wanneer u op , , of drukt, verschijnt het hoofdscherm voor de geselecteerde functie. Hieronder ziet u bijvoorbeeld het hoofdscherm van de kopieerfunctie.
apparaat, zoals of . Daarnaast kunt u het scherm gebruiken om vele instellingen op te geven voor de verschillende functies, zoals faxen en scannen. Overzicht van menuopties Het scherm Wanneer u op (Rapport), wordt het scherm weergegeven. Via dit scherm kunt u verschillende rapporten afdrukken, zoals de verzend- en ontvangstresultaten voor faxen of de inhoud van het adresboek.
Hiermee kunt u controleren hoeveel geheugen er wordt gebruikt voor het opslaan van beveiligde documenten. Een document afdrukken dat is beveiligd met een pincode (beveiligd afdrukken) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Status van kopieer-, afdruk-, verzend- en ontvangsttaken Hiermee geeft u de huidige status van het geselecteerde item weer. Hieronder ziet u het scherm als voorbeeld.
0CSC-019 Aanmelden bij de machine Wanneer Afdeling ID beheer is ingeschakeld, moet u zich aanmelden om het apparaat te kunnen gebruiken. Als het aanmeldingsscherm wordt weergegeven, volgt u de onderstaande procedure om de ID en pincode van uw afdeling in te voeren. Aanmelden is mogelijk ook verplicht als u de ID van een systeembeheerder wilt gebruiken. 1 Voer een ID in. 1 Druk op 2 Voer met de numerieke toetsen een pincode in van maximaal zeven cijfers en druk op .
0CSC-01A Documenten plaatsen Leg documenten op de glasplaat of in de documentinvoer. Gebruik de glasplaat voor het scannen van dikke of ingebonden documenten, zoals boeken. U kunt twee of meer vellen van documenten in de documentinvoer plaatsen zodat deze continu kunnen worden gescand. Documenttype of Scangebied voor informatie over de soorten documenten die u op de glasplaat of in de Raadpleeg documentinvoer kunt plaatsen en voor informatie over het scanbare gebied van een document.
2 Leg het document met de afdrukzijde naar beneden op de glasplaat. Leg het document in de linkerbovenhoek van de glasplaat. OPMERKING: Om transparante documenten (bijvoorbeeld calqueerpapier of transparanten) te scannen, bedekt u deze met een vel normaal, wit papier. 3 Sluit de documentinvoer voorzichtig. Het apparaat is gereed om het document te scannen. Als het scannen is voltooid, haalt u het document van de glasplaat.
4 Schuif de documentgeleiders stevig tegen de randen van het document. Schuif de documentgeleiders naar binnen totdat ze stevig tegen de randen van het document zitten. De machine is gereed om het document te scannen. BELANGRIJK: Schuif de documentgeleiders stevig tegen de randen van het document. Als de documentgeleiders te los of te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan.
0CSC-01C Papier plaatsen U kunt het papier plaatsen in de papierlade of in de sleuf voor handmatige invoer. Gebruik de papierlade voor het laden van de papiersoort die u het meest gebruikt. De papierlade is handig wanneer u grote hoeveelheden papier gebruikt. Gebruik de sleuf voor handmatige invoer wanneer u tijdelijk een formaat of type papier wilt gebruiken dat niet in de papierlade is geplaatst. Raadpleeg Papier voor beschikbare papierformaten.
Papiersoort Papierinstelling op het apparaat Papiergewicht 60 tot 74 g/m² *1 70 tot 84 g/m² *1 75 tot 90 g/m² *2 Gerecycled papier 60 tot 74 g/m² Gekleurd papier 60 tot 74 g/m² 85 tot 120 g/m² 121 tot 163 g/m² Normaal papier *2 Dik papier Enveloppen 100 tot 110 g/m² 111 tot 130 g/m² 131 tot 160 g/m² 161 tot 220 g/m² Gecoat papier Transparanten
Bewaar het papier niet in direct zonlicht, op een plaats die onderhevig is aan hoge vochtigheid of droogte of op een plaats met grote verschillen in temperatuur of luchtvochtigheid. OPMERKING Als u gaat afdrukken op papier dat vochtig is geworden Er kan stoom vrijkomen in het uitvoergebied van het apparaat of er kunnen zich waterdruppels vormen op de achterzijde van het bedieningspaneel of in het uitvoergebied. Dit is normaal.
0CSC-01E Papier in de papierlade plaatsen Gebruik de papierlade voor het papier dat u het meest gebruikt. Wanneer u wilt afdrukken op papier dat niet beschikbaar is in de Papier laden in de sleuf voor handmatige invoer papierlade, legt u het papier in de sleuf voor handmatige invoer. BELANGRIJK Plaats het papier met de korte zijde naar voren U kunt papier niet laden met de lange zijde naar voren. Plaats het papier met de korte zijde naar voren.
3 Leg het papier zo dat de rand van de papierstapel net de achterzijde van de papierlade raakt. Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen. BELANGRIJK: Zorg dat de stapel niet hoger is dan de markering voor het maximale aantal vellen. Zorg ervoor dat de stapel papier niet hoger is dan de markering voor het maximale aantal vellen ( kan dit papierstoringen veroorzaken. ).
KOPPELINGEN Papier 㻣㻣㻌㻛㻌㻢㻤㻠
0CSC-01F Papier laden in de sleuf voor handmatige invoer Wanneer u wilt afdrukken op papier dat niet beschikbaar is in de papierlade, legt u het papier in de sleuf voor handmatige invoer. Papier in de papierlade plaatsen Gebruik de papierlade voor het papier dat u het meest gebruikt. Voor de MF8580Cdw / MF8550Cdn / MF8540Cdn Voor de MF8280Cw / MF8230Cn BELANGRIJK Plaats het papier met de korte zijde naar voren U kunt papier niet laden met de lange zijde naar voren.
4 Plaats het papier in de sleuf voor handmatige invoer totdat u weerstand voelt. Plaats het papier met de korte zijde naar voren, met de afdrukzijde naar boven. U kunt papier niet laden met de lange zijde naar voren. Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen. BELANGRIJK: Zorg dat de stapel niet hoger is dan de markering voor het maximale aantal vellen.
2 Plaats het papier en schuif de papiergeleiders tegen de breedte van het papier. Plaats het papier met de korte zijde naar voren, met de afdrukzijde naar boven. U kunt papier niet laden met de lange zijde naar voren. Duw het papier 10 tot 20 mm in de sleuf voor handmatige invoer en schuif de geleiders vervolgens naar binnen totdat ze stevig tegen de randen van het papier zitten. BELANGRIJK: Schuif de papiergeleiders stevig tegen de randen van het papier.
0CSC-01H Enveloppen plaatsen Strijk de enveloppen glad voordat u ze gaat laden. Let ook op de invoerrichting van de enveloppen en welke kant naar boven wijst. Voordat u enveloppen gaat laden In de papierlade In de sleuf voor handmatige invoer OPMERKING In dit gedeelte wordt uitgelegd hoe u enveloppen in de gewenste richting laadt. Daarnaast worden de stappen besproken die u Papier in de papierlade plaatsen of Papier laden in de sleuf moet uitvoeren voordat u enveloppen gaat laden.
In de papierlade Laad enveloppen van het formaat Monarch (Alleen de MF8280Cw / MF8230Cn), COM10, DL of ISO-C5 met de korte zijde naar voren en met de kant zonder lijm (de voorzijde) naar boven. U kunt niet afdrukken op de achterzijde van enveloppen. OPMERKING Enveloppen van het formaat Monarch kunt u niet plaatsen in de papierlade van de MF8580Cdw / MF8550Cdn / MF8540Cdn. Gebruik in dat geval de sleuf voor handmatige invoer.
0CSC-01J Voorbedrukt papier plaatsen Als u papier gebruikt waarop vooraf een logo is afgedrukt, let u bij het plaatsen op de invoerrichting van het papier. Zorg dat het papier goed is geplaatst zodat er op de juiste kant van het papier met een logo wordt afgedrukt.
Afdrukken op papier met logo's in de afdrukrichting Liggend OPMERKING De instelling (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Wanneer u afdrukt op voorbedrukt papier, moet u de afdrukzijde van het geladen papier wijzigen als u enkelzijdig of dubbelzijdig gaat afdrukken.
0CSC-01K Het type en formaat papier opgeven U moet ervoor zorgen dat de instellingen voor het type en formaat papier overeenkomen met het papier dat is geladen. Vergeet dus niet de papierinstellingen aan te passen wanneer u papier gaat laden dat afwijkt van het eerder gebruikte papier. BELANGRIJK Als de instellingen onjuist zijn, kan het papier vastlopen of kan er een afdrukfout optreden.
0CSC-01L Het type en formaat papier opgeven dat in de papierlade is geplaatst 1 Druk op (Papier/instellingen selecteren). Als het onderstaande scherm wordt weergegeven, drukt u op . Druk vervolgens op 2 Selecteer of en druk op / om te selecteren. . wordt alleen weergegeven als de optionele papierlade (lade 2) is geïnstalleerd (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn).
0CSC-01R Het type en formaat papier opgeven dat in de sleuf voor handmatige invoer is geladen Het onderstaande scherm wordt weergegeven als er papier is geladen in de sleuf voor handmatige invoer. Volg de aanwijzingen op het scherm om instellingen op te geven voor het formaat en type papier dat is geladen.
4 2 Druk op . Selecteer het papiertype en druk op .
0CSC-01S Standaardpapierinstellingen vastleggen voor de sleuf voor handmatige invoer U kunt standaardpapierinstellingen opslaan voor de sleuf voor handmatige invoer. Hierdoor hoeft u niet steeds instellingen in te voeren wanneer u altijd hetzelfde papier gebruikt in de sleuf voor handmatige invoer. OPMERKING Als u standaardpapierinstellingen hebt opgegeven, wordt het scherm met papierinstellingen niet meer weergegeven wanneer u papier laadt. U gebruikt dan altijd dezelfde instellingen.
2 Geef de lengte van de zijde op (de kortere zijde). Selecteer en druk op . Voer de lengte van de zijde in met 3 / of de numerieke toetsen en druk op . Geef de lengte van de zijde op (de langere zijde). Selecteer en druk op . Geef de lengte van de zijde op en druk op . 4 5 Druk op . Selecteer het papiertype en druk op .
0CSC-01U Een aangepast papierformaat registreren U kunt maximaal drie aangepaste papierformaten opslaan die u regelmatig gebruikt. 1 Druk op (Papier/instellingen selecteren). Als het onderstaande scherm wordt weergegeven, drukt u op . Druk vervolgens op 2 Selecteer en druk op 3 Selecteer en druk op / om te selecteren. . .
4 Geef het papierformaat op. 1 Geef de lengte van de zijde op (de kortere zijde). Selecteer en druk op . Voer de lengte van de zijde in met 2 / of de numerieke toetsen en druk op . Geef de lengte van de zijde op (de langere zijde). Selecteer en druk op . Geef de lengte van de zijde op en druk op . 3 5 Druk op . Selecteer het papiertype en druk op .
OPMERKING: De opgeslagen papierformaten worden weergegeven wanneer u de standaardpapierinstellingen voor de sleuf voor handmatige invoer opgeeft. In het scherm kunt u één van de weergegeven formaten selecteren als het standaardpapierformaat voor de sleuf Standaardpapierinstellingen vastleggen voor de sleuf voor handmatige invoer voor handmatige invoer.
0CSC-01W Het bedieningspaneel gebruiken Gebruik de onderstaande toetsen om instellingen op te geven en waarden aan te passen. De toetsen / Door het scherm bladeren Aan de rechterkant van het scherm ziet u een schuifbalk als niet alle informatie op één scherm past. Als de schuifbalk wordt / om omhoog en omlaag te bladeren. De tekst- en achtergrondkleuren van een item worden weergegeven, gebruikt u omgekeerd wanneer u deze toetsen selecteert.
gebruiken Druk op om een instelling toe te passen. De multifunctionele toetsen (links/rechts) gebruiken Onder aan het scherm kunnen items worden weergegeven zoals en in het voorbeeld hieronder. Druk op de bijbehorende multifunctionele toets (links/rechts) om één van deze items te selecteren.
0CSC-01X Tekst invoeren In dit gedeelte wordt uitgelegd hoe u tekst en cijfers kunt invoeren. Een ander type tekst kiezen Druk op om te schakelen tussen het type tekst dat wordt ingevoerd. Het geselecteerde type tekst wordt aangegeven met "A", "a" of "12" rechtsboven het invoerveld. OPMERKING: U kunt ook op drukken om het type tekst te wijzigen. Typen tekst die u kunt invoeren In de onderstaande tabel ziet u welke tekst u kunt invoeren met de numerieke toetsen en Toets A . a @.
Voorbeeld: "Canon-1" 1 Druk herhaaldelijk op (of 2 Druk herhaaldelijk op 3 Druk herhaaldelijk op (of 4 Druk herhaaldelijk op totdat de letter "a" is geselecteerd. 5 Druk herhaaldelijk op totdat de letter "n" is geselecteerd. 6 Druk herhaaldelijk op totdat de letter "o" is geselecteerd. 7 Druk herhaaldelijk op totdat de letter "n" is geselecteerd. 8 Druk herhaaldelijk op totdat het symbool "-" is geselecteerd.
0CSC-01Y Opslaan in het adresboek (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt veelgebruikte bestemmingen opslaan in het adresboek en eenvoudig selecteren als u ze nodig hebt. U kunt maximaal 200 bestemmingen opslaan in het adresboek. U kunt bestemmingen alfabetisch zoeken, kiezen uit lijsten in het adresboek of invoeren via een code van drie cijfers (codes voor verkort kiezen). Daarnaast kunt u de volgende functies gebruiken om bestemmingen snel op te geven.
0CSC-020 Bestemmingen opslaan in het adresboek De bestemmingen kunt u achteraf altijd wijzigen of verwijderen. U kunt maximaal 200 bestemmingen opslaan in het adresboek. 1 2 3 Druk op of Druk op . . Druk op . Als u wordt gevraagd een pincode in te voeren, gebruikt u de numerieke toetsen om de juiste pincode in te voeren en drukt u op . Een pincode instellen voor het adresboek 4 5 Druk op / om te selecteren en druk vervolgens op Selecteer of en druk op .
U kunt de inhoud van een opgeslagen bestemming altijd wijzigen. Het gaat hierbij om gegevens zoals nummers, namen, typen en codes voor verkort kiezen. 1 2 3 4 5 Druk op of Druk op . . Druk op / om het tabblad te selecteren met de bestemming die u wilt wijzigen. Druk op / om de bestemming te selecteren die u wilt wijzigen en druk op . Druk op . Als u wordt gevraagd een pincode in te voeren, gebruikt u de numerieke toetsen om de juiste pincode in te voeren en drukt u op .
0CSC-021 Bestemmingen opslaan als favorieten Veelgebruikte bestemmingen kunt u als favorieten opslaan in het adresboek. De bestemmingen kunt u achteraf altijd wijzigen of verwijderen. U kunt maximaal 19 bestemmingen registreren in uw favorieten. OPMERKING Er worden geen codes voor verkort kiezen toegewezen aan favorieten. 1 2 3 Druk op of Druk op . . Druk op .
De inhoud van opgeslagen bestemmingen in de favorietenlijst wijzigen U kunt de inhoud van een opgeslagen bestemming altijd wijzigen. Het gaat hierbij om gegevens zoals nummers, namen en typen. 1 2 3 4 5 Druk op of Druk op . . Druk op / om < > te selecteren. Druk op / om de bestemming te selecteren die u wilt wijzigen en druk op . Druk op . Als u wordt gevraagd een pincode in te voeren, gebruikt u de numerieke toetsen om de juiste pincode in te voeren en drukt u op .
0CSC-022 Meerdere bestemmingen opslaan voor groepskiezen U kunt een aantal bestemmingen combineren in groepen. Als u een groep hebt opgeslagen, kunt u achteraf altijd bestemmingen toevoegen of verwijderen. 1 2 3 Druk op of Druk op . . Druk op . Als u wordt gevraagd een pincode in te voeren, gebruikt u de numerieke toetsen om de juiste pincode in te voeren en drukt u op . Een pincode instellen voor het adresboek 4 Druk op / om te selecteren en druk vervolgens op .
De inhoud van opgeslagen groepen wijzigen U kunt de inhoud van een opgeslagen groep altijd wijzigen. Het gaat hierbij om gegevens zoals namen, bestemmingen en codes voor verkort kiezen. 1 2 3 4 5 Druk op of Druk op . . Druk op / om < > te selecteren. Druk op / om de bestemming te selecteren die u wilt wijzigen en druk op . Druk op . Als u wordt gevraagd een pincode in te voeren, gebruikt u de numerieke toetsen om de juiste pincode in te voeren en drukt u op .
0CSC-023 Het volume aanpassen De machine produceert in verschillende situaties geluidssignalen, bijvoorbeeld om aan te geven dat het versturen van een fax is voltooid of dat er papier is vastgelopen. U kunt het volume van deze geluiden afzonderlijk instellen. 1 2 3 4 Druk op . Druk op / om te selecteren en druk vervolgens op Selecteer en druk op Selecteer een instelling en druk op . . .
0CSC-024 De slaapstand instellen In de slaapstand wordt het stroomverbruik verlaagd door de stroomtoevoer naar het bedieningspaneel te onderbreken. Als er gedurende op bepaalde tijd geen bewerkingen worden uitgevoerd op de machine, zoals tijdens de lunchpauze, kunt u energie besparen door op het bedieningspaneel te drukken. U kunt ook de instelling Automatische sluimertijd gebruiken om de machine automatisch in de slaapstand te zetten als deze gedurende de opgegeven tijd inactief is.
de handset van de haak neemt.
0CSC-025 De automatische uitschakeltijd instellen (Alleen de MF8540Cdn / MF8230Cn) Door deze instelling in te schakelen, kunt u de machine zodanig instellen dat deze automatisch wordt uitgezet. De machine wordt automatisch uitgeschakeld zodra de opgegeven periode van inactiviteit is verstreken sinds het activeren van de slaapstand. U kunt instellen dat de stroomtoevoer automatisch wordt uitgeschakeld als u vergeet het apparaat uit te schakelen, bijvoorbeeld 's nachts of in vakanties.
0CSC-026 Kopiëren In dit hoofdstuk wordt aandacht besteed aan basisbewerkingen voor kopiëren en worden verschillende andere handige functies beschreven, zoals dubbelzijdig kopiëren en beide zijden van een identiteitsbewijs kopiëren op één pagina.
0CSC-027 Basisbewerkingen voor kopiëren 1 2 3 Plaats één of meer documenten. Druk op Documenten plaatsen . Gebruik de numerieke toetsen om het gewenste aantal kopieën in te voeren. U kunt een waarde invoeren van 1 tot 99. Druk op 4 Geef de gewenste kopieerinstellingen op. Gebruik 5 om het ingevoerde aantal te annuleren. Druk op / om de instellingen te selecteren. Verschillende kopieerinstellingen . Het kopiëren wordt gestart.
2 Selecteer de papierbron met het papier dat u wilt gebruiken en druk op . Als dit scherm niet wordt weergegeven, gaat u naar stap 3. 3 Leg het volgende document op de glasplaat en druk op . Herhaal deze stap totdat het volledige document is gescand. 4 Druk op . OPMERKING: Wanneer het bericht of wordt weergegeven op het display.
0CSC-028 Kopieerpapier selecteren Geef aan welke papierbron het papier bevat dat u wilt gebruiken voor het afdrukken van kopieën. OPMERKING U moet eerst het formaat en type papier opgeven dat in de papierbron is geladen. Het type en formaat papier opgeven Papier plaatsen selecteer de papierbron ( , , ) MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn < > Hiermee selecteert u het papier dat in de sleuf voor handmatige invoer is geladen.
0CSC-029 Kopiëren annuleren Als u de kopieerbewerking wilt annuleren direct nadat u op hebt gedrukt, selecteert u op het scherm of drukt u op op het bedieningspaneel. U kunt het kopiëren ook annuleren nadat u de kopieerstatus hebt gecontroleerd. Druk op op het scherm dat wordt weergegeven tijdens het kopiëren Druk op om te annuleren Als op het scherm een lijst met documenten verschijnt als u op De documenten zijn gescand en wachten om te worden afgedrukt.
KOPPELINGEN Basisbewerkingen voor kopiëren 㻝㻝㻠㻌㻛㻌㻢㻤㻠
0CSC-02A Verschillende kopieerinstellingen U kunt kiezen uit een groot aantal instellingen om zo op de gewenste manier kopieën te maken. Zo zijn er instellingen om papier te besparen maar ook om uw documenten beter leesbaar te maken.
0CSC-02C Vergroten of verkleinen U kunt kopieën vergroten of verkleinen door een vooraf ingesteld zoompercentage te gebruiken zoals A4> of door in stappen van 1% een aangepast zoompercentage in te stellen. selecteer het zoompercentage Druk op / of de numerieke toetsen om het zoompercentage in te voeren en druk vervolgens op . U kunt in stappen van 1% een zoompercentage instellen tussen 25 en 400%.
0CSC-02E Documenttype selecteren U kunt de optische beeldkwaliteit voor de kopie selecteren op basis van het documenttype, zoals documenten met alleen tekst, documenten met grafieken en tabellen of documenten met tijdschriftfoto's. selecteer het documenttype Deze optie is geschikt voor het kopiëren van documenten die zowel tekst als foto's bevatten of voor documenten die gedetailleerde lijnen bevatten, zoals kaarten.
0CSC-02F Dichtheid aanpassen U kunt de dichtheid van de kopie aanpassen als de tekst of afbeeldingen in een document te licht of te donker zijn. U kunt ook de achtergrond aanpassen om de achtergrondkleur te verwijderen wanneer de pagina's van een document licht gekleurd zijn of vergeeld.
KOPPELINGEN Basisbewerkingen voor kopiëren Kleurbalans aanpassen Scherpte aanpassen 㻝㻝㻥㻌㻛㻌㻢㻤㻠
0CSC-02H Kleurbalans aanpassen Pas de kleurbalans aan om de individuele niveaus geel, magenta, cyaan of zwart te bepalen. selecteer de kleur pas het kleurniveau aan <–> Hiermee maakt u de geselecteerde kleur lichter. <+> Hiermee maakt u de geselecteerde kleur donkerder.
0CSC-02J Scherpte aanpassen U kunt de scherpte van de gekopieerde afbeelding aanpassen. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren. pas de scherpte aan <–> Hiermee verlaagt u de scherpte, waardoor het beeld minder hard is. Voorbeeld: Als u de weergave van foto's uit een tijdschrift wilt verbeteren <+> Hiermee verhoogt u de scherpte van de afbeelding.
0CSC-02L Dubbelzijdig kopiëren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt twee pagina's van een document op beide zijden van het papier kopiëren. U kunt ook een dubbelzijdig document op beide zijden van het papier kopiëren, of op twee afzonderlijke pagina's. OPMERKING <2-Zijdig> is mogelijk niet voor alle formaten en soorten papier beschikbaar. Papier <2-Zijdig> is niet beschikbaar als u of gebruikt.
2-Zijdig->2-Zijdig Als u kopieën wilt maken met een ander type inbinding dan het origineel selecteer de afdrukrichting van het origineel selecteer het type binding van het selecteer het type binding voor de kopie, een ander type dan bij het origineel origineel 2-Zijdig->1-Zijdig Met deze instelling kunt u de richting van het uitvoerpapier uitlijnen.
0CSC-02R Meerdere documenten op één vel kopiëren (2 op 1/4 op 1) U kunt twee of vier documenten verkleind kopiëren op één vel papier. Hierdoor neemt het aantal pagina's af en kunt u eenvoudig papier besparen. OPMERKINGEN Als u <2 op 1>/<4 op 1> gebruikt, wordt de kopieerverhouding automatisch verkleind (de kopieerverhouding wordt drukt, maar de weergegeven op het scherm).
0CSC-02K De toets [Papierbesparingskopie] gebruiken Met <2 op 1>/<4 op 1> kunt u meerdere documenten op één vel kopiëren en met <2-Zijdig> kunt u het combineert deze functies en maakt het document op beide zijden van een pagina kopiëren. De toets eenvoudiger om papier te besparen dan bij afzonderlijk gebruik van de functies. OPMERKING De instelling voor dubbelzijdig afdrukken is mogelijk niet voor alle formaten en soorten papier Papier beschikbaar.
Meerdere documenten op één vel kopiëren (2 op 1/4 op 1) 㻝㻞㻢㻌㻛㻌㻢㻤㻠
0CSC-02S Beide zijden van een identiteitsbewijs op één pagina kopiëren Gebruik om de voor- en achterzijde van een identiteitsbewijs op dezelfde zijde van een pagina te kopiëren. Deze functie is handig als u bijvoorbeeld een rijbewijs of paspoort gaat kopiëren. OPMERKING is beschikbaar met papier van het formaat A4/Letter of groter. wordt automatisch ingesteld op <100%>.
0CSC-02U Donkere randen en kaderlijnen wissen (Kader wissen) Als u documenten kopieert die kleiner zijn dan het uitvoerpapierformaat, verschijnen er mogelijk kaderlijnen rond de randen in de gekopieerde afbeelding. Als u tegenover elkaar liggende pagina's van een dik boek kopieert, verschijnen er mogelijk donkere randen. stelt u in staat om deze kaderlijnen en donkere randen te wissen.
0CSC-02W Kopieën sorteren per pagina Als u meerdere kopieën wilt gaan maken van documenten met meerdere pagina's, kunt u op zetten om de kopieën op volgorde te sorteren. Deze functie is handig bij het voorbereiden van handouts voor vergaderingen of presentaties. De kopieën worden per pagina gegroepeerd en worden niet gesorteerd.
0CSC-02X De gewenste kopieerinstellingen configureren De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u vaak dezelfde instellingen gebruikt bij het kopiëren, kunt u deze opslaan als standaardinstellingen en hoeft u niet steeds dezelfde instellingen te configureren. Daarnaast kunt u combinaties van verschillende kopieerinstellingen opslaan en oproepen wanneer u ze nodig hebt.
0CSC-02Y De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft te configureren als u gaat kopiëren.
0CSC-030 Veelgebruikte kopieerinstellingen opslaan U kunt maximaal vier veelgebruikte combinaties van kopieerinstellingen opslaan. Door eenvoudig een opgeslagen combinatie van instellingen te selecteren als u dit nodig hebt, hoeft u dezelfde instellingen niet opnieuw te configureren telkens als u kopieën maakt. Als u bijvoorbeeld vaak het aantal kopieën instelt op 5, stelt u in op en vergroot u de scherpte tijdens het kopiëren.
0CSC-031 Faxen In dit hoofdstuk worden basishandelingen voor het faxen en verschillende andere nuttige functies beschreven, zoals Faxen via pc om documenten rechtstreeks vanaf computers te verzenden, Adresboek om bestemmingen gemakkelijk op te geven en Doorsturen om faxen te ontvangen zelfs wanneer u niet op kantoor bent. OPMERKING Faxfuncties zijn alleen beschikbaar op de MF8580Cdw / MF8550Cdn / MF8280Cw. U moet enkele procedures doorlopen voordat u de faxfuncties kunt gebruiken.
Eerst een gesprek tot stand brengen en dan een fax versturen (handmatig verzenden) Faxen gelijktijdig naar meerdere bestemmingen verzenden (groepsverzending) Ontvangen faxen doorsturen Faxinformatiediensten ontvangen Faxen rechtstreeks vanaf uw computer versturen Faxen versturen vanaf uw computer 㻝㻟㻠㻌㻛㻌㻢㻤㻠 Ontvangen faxen in het geheugen opslaan (ontvangst in geheugen)
0CSC-032 Faxen verzenden OPMERKING U moet enkele procedures doorlopen voordat u de faxfuncties kunt gebruiken. faxfuncties (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) 1 2 3 Plaats één of meer documenten. Druk op Begininstellingen configureren voor Documenten plaatsen . Voer de bestemming in met de numerieke toetsen en druk op . Als het apparaat is verbonden met een telefooncentrale, drukt u op / te selecteren en drukt u op voordat u de R-toets instelling bestemming invoert.
3 Voer de landcode, het netnummer en het faxnummer in. 4 Selecteer om eventueel een pauze aan het einde van het faxnummer toe te voegen en druk vervolgens op . De wachttijd die hier wordt ingevoegd, is standaard ingesteld op 10 seconden. Deze wachttijd kunt u niet aanpassen. 5 4 Druk op . Geef de gewenste scaninstellingen op. Gebruik 5 Druk op / om de instellingen te selecteren. Verschillende faxinstellingen (Zwart-wit) om het verzenden te starten. Het scannen wordt gestart.
3 Druk op . De faxen worden verzonden.
0CSC-033 Het verzenden van faxen annuleren Als u het verzenden van faxen wilt annuleren direct nadat u op (Zwart-wit) hebt gedrukt, drukt u op kunt het verzenden van faxen ook annuleren nadat u de faxstatus hebt gecontroleerd. Druk op op het bedieningspaneel. U om te annuleren Als op het scherm een lijst met documenten verschijnt als u op De documenten zijn gescand en wachten op verwerking. Druk op annuleren.
0CSC-034 Verschillende faxinstellingen U kunt kiezen tussen verschillende nuttige instellingen, bijvoorbeeld als u de dichtheid wilt aanpassen of de helderheid van een afbeelding wilt verbeteren.
0CSC-035 Resolutie aanpassen U kunt de resolutie selecteren die het beste past bij uw documenttype. Hoe hoger de resolutie, des te scherper de afbeelding, maar des te langer het duurt om de fax te verzenden. selecteer de resolutie <200 x 100 dpi (Normaal)> Selecteer deze optie voor documenten met alleen tekst. <200 x 200 dpi (Fijn)> Selecteer deze optie voor documenten met kleine letters. <200 x 200 dpi (Foto)> Deze optie is geschikt voor documenten met foto's.
0CSC-036 Dichtheid aanpassen U kunt de dichtheid van de fax aanpassen als de tekst of afbeeldingen in een document te licht of te donker zijn. pas de dichtheid aan <–> Hiermee verlaagt u de dichtheid. <+> Hiermee verhoogt u de dichtheid.
0CSC-037 Scherpte aanpassen U kunt de scherpte van de afbeelding aanpassen voordat u deze verzendt. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren. pas de scherpte aan <–> Hiermee verlaagt u de scherpte, waardoor het beeld minder hard is. Voorbeeld: Als u de weergave van foto's uit een tijdschrift wilt verbeteren <+> Hiermee verhoogt u de scherpte van de afbeelding.
0CSC-038 Dubbelzijdige documenten scannen (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Het apparaat kan automatisch de voor- en achterzijde scannen van documenten in de invoer. BELANGRIJK U moet de documenten dan wel in de invoer leggen. Het apparaat kan de beide zijden van documenten namelijk niet automatisch scannen wanneer u de documenten op de glasplaat legt of wanneer Handmatig verzenden is ingeschakeld. <2-Z.
0CSC-039 Bestemmingen voor faxen opgeven U kunt bestemmingen opgeven door deze in het adresboek te selecteren en door de numerieke toetsen te gebruiken. Als u het adresboek wilt gebruiken, moet u eerst bestemmingen opslaan in het adresboek. U kunt ook eerder gebruikte bestemmingen opgeven. Als in uw kantooromgeving een LDAP-server is geïnstalleerd, kunt u ook bestemmingen op de server opgeven.
0CSC-03A Opgeven met numerieke toetsen (fax) Gebruik de numerieke toetsen op het bedieningspaneel om bestemmingen op te geven. BELANGRIJK Als is ingesteld op , kunt u geen bestemmingen invoeren met de numerieke toetsen. Beperkingen instellen voor beschikbare bestemmingen 1 2 Druk op . Voer de bestemming in met de numerieke toetsen en druk op . Als u een verkeerd teken invoert, drukt u op . (Druk eenmaal op de toets om het laatst ingevoerde teken te wissen.
OPMERKING Als u bestemmingen snel en eenvoudig wilt verwijderen zonder de lijst met bestemmingen weer te geven Voordat u selecteert in stap 1, kunt u op / drukken om te schakelen tussen de bestemmingen die u hebt opgegeven. Geef op deze manier de bestemming weer die u wilt verwijderen en druk .
0CSC-03C Opgeven vanuit het adresboek (fax) U kunt een bestemming opgeven via het adresboek door een keuze te maken in de lijst met opgeslagen bestemmingen of door op naam van ontvanger te zoeken naar bestemmingen. U kunt ook rechtstreeks een bestemming opgeven door een code van drie cijfers (code voor verkort kiezen) in te voeren die is toegewezen aan een bestemming.
4 Druk op / om een bestemming te selecteren en druk vervolgens op . OPMERKINGEN: Als u meerdere bestemmingen wilt opgeven Herhaal stappen 2 tot en met 4. U kunt maximaal 200 bestemmingen opgeven. Als u extra bestemmingen wilt opgeven met de numerieke toetsen, drukt u op . (Nieuw)> te selecteren op het scherm en drukt u vervolgens op / om
U kunt ook 3 / gebruiken om te selecteren op het scherm en vervolgens op drukken. Gebruik de numerieke toetsen om de code van drie cijfers (001 - 181) in te voeren. Als u een verkeerd teken invoert, drukt u op . (Druk eenmaal op de toets om het laatst ingevoerde teken te wissen. Houd de toets langer ingedrukt om alle ingevoerde tekens te wissen.
Voordat u selecteert in stap 1, kunt u op / drukken om te schakelen tussen de bestemmingen die u hebt opgegeven. Geef op deze manier de bestemming weer die u wilt verwijderen en druk .
0CSC-03E Eerder gebruikte bestemmingen opgeven (fax) U kunt een bestemming selecteren uit de drie laatst gebruikte bestemmingen. Als u een eerder gebruikte bestemming opgeeft, worden ook de laatst gebruikte faxinstellingen, zoals de dichtheid, voor die bestemming geselecteerd. BELANGRIJK Als is ingesteld op , kunt u deze functie niet gebruiken.
0CSC-03F Bestemmingen op een LDAP-server opgeven (fax) Als in uw kantooromgeving een LDAP-server is geïnstalleerd, kunt u ook bestemmingen opgeven die op die server zijn vastgelegd. Hiervoor opent u vanaf het apparaat het adresboek op een LDAP-server en zoekt u de bestemming. OPMERKING U moet de instellingen voor verbinding met een LDAP-server vooraf opgeven. LDAP-servers registreren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) 1 2 Druk op .
7 Geef de zoekmethode op en druk op . Er worden alleen bestemmingen gevonden en weergegeven die voldoen aan alle zoekcriteria uit stappen 4 en 5. De zoekresultaten bestaan uit alle bestemmingen die voldoen aan één of meer van de opgegeven zoekcriteria uit stappen 4 en 5. 8 Druk op . U ziet de bestemmingen die voldoen aan de opgegeven zoekcriteria.
3 Druk op , selecteer en druk op . OPMERKING Als u bestemmingen snel en eenvoudig wilt verwijderen zonder de lijst met bestemmingen weer te geven Voordat u selecteert in stap 1, kunt u op / drukken om te schakelen tussen de bestemmingen die u hebt opgegeven. Geef op deze manier de bestemming weer die u wilt verwijderen en druk .
0CSC-03H De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft te configureren als u gaat faxen.
0CSC-03J Faxen ontvangen In dit gedeelte worden de methoden beschreven voor het ontvangen van faxen. Er wordt ook uitgelegd hoe u de machine configureert voor het ontvangen van faxen. U moet enkele procedures uitvoeren met betrekking tot de faxfuncties voordat u de ontvangstinstellingen Begininstellingen configureren voor faxfuncties (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) gaat opgeven. OPMERKING Het apparaat kan ontvangen faxdocumenten afdrukken op papier van het formaat A4 of Letter.
Als u een externe telefoon met faxfuncties aansluit, moet u de telefoon instellen voor het handmatig ontvangen van faxen. Als u de handset van de telefoon oppakt en een pieptoon hoort, weet u dat het een binnenkomende fax is. U kunt de fax dan ontvangen door op de telefoon een bepaalde code in te voeren. Een telefoon gebruiken om faxen te ontvangen (ontvangst op afstand) De machine instellen voor het ontvangen van faxen 1 2 3 Druk op .
1 2 Als u het signaal van een binnenkomende oproep hoort, neemt u de handset van de telefoon op. Als u een pieptoon hoort, voert u met de toetsen van de telefoon de code voor ontvangst op afstand in. Deze code is standaard ingesteld op 25. U kunt deze code desgewenst wijzigen. 3 Leg de handset op de haak.
0CSC-03K Faxen verzenden en ontvangen op de manier zoals u dat wilt Naast de standaardmethoden voor het verzenden en ontvangen van faxen, zijn er verschillende andere manieren die aansluiten bij de manier waarop u werkt.
0CSC-03L Eerst een gesprek tot stand brengen en dan een fax versturen (handmatig verzenden) U kunt faxen handmatig versturen aan het einde van een telefoongesprek. Wanneer u een pieptoon hoort (Zwart-wit) om de over de telefoon, betekent dit dat de ontvanger probeert uw fax te ontvangen. Druk op fax te verzenden. OPMERKING U moet vooraf een telefoon of de optionele handset aansluiten op het apparaat. 1 Plaats één of meer documenten.
0CSC-03R Faxen gelijktijdig naar meerdere bestemmingen verzenden (groepsverzending) U kunt faxen versturen naar maximaal 210 bestemmingen tegelijk. Gebruik de numerieke toetsen* of het adresboek om meerdere bestemmingen op te geven. Als uw organisatie beschikt over een LDAP-server * , kunt u de server via het apparaat raadplegen en vervolgens maximaal 10 bestemmingen opgeven. * Het maximumaantal bestemmingen dat u kunt opgeven wanneer u een LDAP-server of de numerieke toetsen gebruikt, is 10.
0CSC-03S Ontvangen faxen in het geheugen opslaan (ontvangst in geheugen) U kunt ontvangen faxen in het geheugen opslaan in plaats van direct na ontvangst af te drukken. De faxdocumenten in het geheugen kunt u op ieder gewenst moment afdrukken, wat betekent dat u overbodige documenten, zoals ongevraagde reclame, eerst kunt verwijderen om zo papier te besparen. Deze functie is ook handig als u vertrouwelijke documenten gaat afdrukken.
afgedrukt. Documenten in het geheugen controleren/verwijderen U kunt gedetailleerde gegevens bekijken van de documenten die in het geheugen zijn opgeslagen, zoals faxnummers van afzenders en het aantal verzonden pagina's, en vervolgens overbodige documenten verwijderen. 1 2 Druk op Druk op (Statusmonitor).
KOPPELINGEN Faxen ontvangen Status en logboek voor verzonden en ontvangen documenten controleren 㻝㻢㻠㻌㻛㻌㻢㻤㻠
0CSC-03U Ontvangen faxen doorsturen U kunt ontvangen documenten doorsturen naar andere bestemmingen. U kunt een bepaald document uit het geheugen doorsturen of instellen dat ontvangen documenten direct automatisch worden doorgestuurd naar opgegeven bestemmingen. U kunt niet alleen faxnummers maar ook e-mailadressen en gedeelde mappen op computers opgeven als een doorstuurbestemming.
0CSC-03W Een document selecteren om door te sturen De machine stuurt het document door dat u selecteert uit alle documenten die in het geheugen zijn ontvangen. Als u deze functie wilt Ontvangen faxen in het geheugen opslaan gebruiken, moet u eerst de functie voor ontvangst in het geheugen activeren. (ontvangst in geheugen) OPMERKING Zo lang de functie voor ontvangst in het geheugen is ingeschakeld, worden de documenten in het geheugen niet verwijderd, ook niet nadat ze zijn doorgestuurd.
0CSC-03X Alle ontvangen documenten automatisch doorsturen U kunt instellen dat alle ontvangen documenten worden doorgestuurd naar bepaalde bestemmingen. U kunt zo altijd en overal faxen ontvangen, ook als u niet op kantoor bent.
Documenten waarvan het doorsturen is mislukt, opslaan in het geheugen Documenten in het geheugen afdrukken, opnieuw verzenden of verwijderen 1 2 3 Druk op Druk op (Statusmonitor). / om te selecteren en druk vervolgens op Selecteer het document dat u wilt controleren en druk op Het gecontroleerde document afdrukken 1 Druk op .
Het gecontroleerde document opnieuw verzenden 1 Druk op . 2 Selecteer en druk op 3 Selecteer een bestemming in het adresboek en druk op Zie . . Opgeven vanuit het adresboek (fax) voor informatie over het werken met het adresboek. Het gecontroleerde document verwijderen 1 Druk op . 2 Selecteer en druk op .
0CSC-03Y Faxinformatiediensten ontvangen Via faxinformatiediensten kunt u op een eenvoudige manier in het bezit komen van nuttige informatie van bedrijven en organisaties. In dit gedeelte wordt een doorsnee procedure beschreven voor het ontvangen van deze diensten. OPMERKING Afhankelijk van de dienst, kunnen de procedures in werkelijkheid iets andere zijn. Volg de procedures voor de dienst die u gebruikt. 1 2 Druk op . Druk op .
KOPPELINGEN Faxen ontvangen 㻝㻣㻝㻌㻛㻌㻢㻤㻠
0CSC-040 Status en logboek voor verzonden en ontvangen documenten controleren De statuswaarden en communicatielogboeken voor verzonden en ontvangen faxdocumenten kunt u afzonderlijk controleren voor verzonden en ontvangen faxen. U kunt gedetailleerde gegevens bekijken van de faxen, zoals bestemmingen en het aantal pagina's, en u kunt overbodige documenten verwijderen. BELANGRIJK Als is ingesteld op , kunt u de communicatielogboeken niet raadplegen.
2 Selecteer het document waarvan u het logboek wilt controleren en druk op . / Hier ziet u een lijst met de documenten die zijn verzonden en ontvangen. geeft aan dat een document zonder problemen is verzonden of ontvangen, en betekent dat een document niet is verzonden of ontvangen omdat de bewerking is geannuleerd of omdat er een fout is opgetreden. Hier ziet u gedetailleerde gegevens van het document dat u in de lijst hebt geselecteerd.
0CSC-041 Faxen versturen vanaf uw computer U kunt faxdocumenten die u op uw computerprogramma hebt gemaakt, rechtstreeks vanaf de computer faxen. U hoeft de documenten dan niet eerst af te drukken en u kunt zo toner en papier besparen.
0CSC-042 Faxen verzenden vanaf een computer BELANGRIJK Als is ingesteld op , kunt u geen faxen versturen vanaf een computer. Faxen via de pc uitschakelen (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) U moet Afdeling ID beheer inschakelen in het faxstuurprogramma dat u gebruikt als deze functie is ingeschakeld op het Afdeling-ID beheer configureren apparaat. Klik voor meer informatie op [Help] in het faxstuurprogramma.
dat verschijnt als u op het tabblad [Speciaal] op [Beveiligingsinstellingen] klikt, wordt er een dialoogvenster weergegeven voor het opnieuw invoeren van het faxnummer als u op [Toevoegen aan bestemmingenlijst] klikt. Klik voor meer informatie op [Help] in het faxstuurprogramma. 4 5 Voeg indien nodig een voorblad toe aan het document. pc Klik op [OK] om het document te verzenden.
0CSC-043 Een voorblad toevoegen aan faxen die u verstuurt vanaf een pc U kunt een voorblad toevoegen aan het document dat u wilt versturen. Selecteer één van de drie kant-en-klare voorbladen in het faxstuurprogramma of maak zelf een voorblad. Klik voor meer informatie op [Help] in het faxstuurprogramma. 1 Open een document in een programma en geef het afdrukvenster weer. De manier waarop u het afdrukvenster weergeeft, kan per programma verschillen.
Tabblad [Afzender] Selecteer de informatie die u wilt meesturen over de afzender en geef deze informatie op. Tabblad [Bestemming] Selecteer de informatie die u wilt meesturen over de bestemming en geef deze informatie op. De namen van bestemmingen, het bedrijf en de afdeling, plus het faxnummer, die zijn opgegeven op het tabblad [Instellingen verzenden] ( Faxen verzenden vanaf een computer) worden opgenomen op het voorblad. Tabblad [Logo]/Tabblad [Handtekening] Geef elke instelling op.
[Aantal te verzenden vellen vermelden] Schakel dit selectievakje in als u het aantal pagina's dat u gaat verzenden, wilt vermelden op het voorblad. Typ vervolgens het aantal pagina's bij [Aantal te verzenden vellen]. Het aantal te verzenden vellen wordt niet automatisch geteld. De waarde die u hier opgeeft, wordt op het voorblad vermeld. [Titel invoegen] Schakel dit selectievakje in als u een titel wilt toevoegen aan het voorblad. Typ vervolgens een titel bij [Titel].
0CSC-044 Het adresboek gebruiken Nadat u veelgebruikte bestemmingen voor faxen die u vanaf de pc stuurt aan het adresboek hebt toegevoegd, kunt u deze bestemmingen eenvoudig opgeven wanneer u vanaf uw pc een fax gaat versturen. U kunt ook adresboekgegevens in de indeling CSV uit andere programma's importeren op het apparaat, zoals uit Microsoft Excel. Omgekeerd kunt u het adresboek ook exporteren naar een bestand voor gebruik op andere faxapparaten of in andere programma's.
0CSC-045 Bestemmingen opslaan In dit gedeelte wordt uitgelegd hoe u bestemmingen kunt opslaan in het adresboek die u wilt gebruiken als u faxen rechtstreeks vanaf uw computer gaat versturen. U kunt verschillende bestemmingen in het adresboek selecteren en deze opslaan als een groepsbestemming (groepskiezen). Dit is handig wanneer u een fax naar meerdere bestemmingen tegelijk wilt sturen. Bestemmingen opslaan Meerdere bestemmingen opslaan als één bestemming (groepskiezen) OPMERKING In totaal kunnen er 6.
OPMERKING: Als u opgeslagen bestemmingen wilt wijzigen of verwijderen, selecteert u een bestemming bij [Adresboek] en klikt u op [Bewerken] of [Verwijderen]. 4 Geef de gewenste instellingen op en klik op [OK]. Adres Voer de naam van de ontvanger, het bedrijf en de afdeling in. [Faxnummer] Voer een of meer faxnummers in. Typ desgewenst een afbreekstreepje tussen nummers. Als u een toelichting wilt geven voor een faxnummer, zoals "Thuis" of "Kantoor", typt u deze bij [Beschrijving].
OPMERKING: Als u opgeslagen bestemmingen wilt wijzigen of verwijderen, selecteert u een bestemming bij [Adresboek] en klikt u op [Bewerken] of [Verwijderen]. 4 Geef de gewenste instellingen op en klik op [OK]. [Groepsnaam] Voer een groepsnaam in zoals "Verkoopafdeling 1". [Weergeven] Selecteer het type bestemmingen dat u wilt weergeven bij [Beschikbare bestemmingen], waaruit u de bestemmingen kunt selecteren die u voor groepskiezen wilt opslaan. [Persoon] afzonderlijke bestemmingen weergeven.
0CSC-046 Opgeslagen bestemmingen gebruiken In dit gedeelte wordt uitgelegd hoe u bestemmingen opvraagt die in het adresboek zijn opgeslagen. Bestemmingen opslaan OPMERKING U kunt het adresboek niet gebruiken als u geen toegang hebt tot de map waarin het adresboek is opgeslagen. Meld u aan als een gebruiker met toegang tot de map of kies een andere opslaglocatie voor het adresboek.
Als u meerdere bestemmingen wilt opgeven, herhaalt u stappen 3 en 4.
0CSC-047 Adresboekgegevens importeren en exporteren U kunt adresboekgegevens in de indeling CSV uit andere programma's importeren op de machine, zoals uit Microsoft Excel. Omgekeerd kunt u het adresboek ook exporteren naar een bestand voor gebruik op andere faxapparaten of in andere programma's. De machine ondersteunt twee bestandsindelingen: CSV-bestanden (*.csv) en Canon Address Book-bestanden (*.abk).
4 Selecteer het bestand dat u wilt importeren en klik op [Openen]. In het geval van een CSV-bestand geeft u de scheidingstekens op die in het bestand worden gebruikt. De bestemmingen die uit het bestand worden geïmporteerd, kunt u nu kiezen in [Adresboek]. Adresboekgegevens exporteren 1 2 3 Open de printermap. De printermap weergeven Klik met de rechtermuisknop op het pictogram voor het faxapparaat en klik op [Printing preferences] (Voorkeursinstellingen voor afdrukken).
OPMERKING: Als u de [Beveiligen met een wachtwoord bij export van de adreslijst] hebt geselecteerd in het dialoogvenster dat verschijnt als u op het tabblad [Speciaal] op [Beveiligingsinstellingen] klikt, wordt er een dialoogvenster weergegeven voor het invoeren van een wachtwoord als u op [Exporteren] klikt. Klik voor meer informatie op [Help] in het faxstuurprogramma. 4 Geef de locatie op voor het opslaan van het bestand, de bestandsnaam en de bestandsindeling. Klik vervolgens op [Opslaan].
2 (Voorkeursinstellingen voor afdrukken). 3 Klik op het tabblad [Adresboek bewerken] 4 Geef de locatie op voor het opslaan van de adresboekgegevens en klik op [OK]. [Map opgeven]. OPMERKING: Sla de adresboekgegevens op in een map waarvoor u schrijfbevoegdheden hebt, zoals de map [My Documents] (Mijn documenten). 5 Als u een adresboek wilt maken, klikt u op [Nieuw]. Als u het bestaande adresboek naar de opgegeven map wilt kopiëren, klikt u op [Kopiëren]. Het adresboek wordt gemaakt of gekopieerd.
Als de map uit stap 4 al een adresboek bevat, wordt het volgende bericht weergegeven. Als u het bestaande adresboek wilt gebruiken, klikt u op [Deze gebruiken]. Als u het adresboek van het faxstuurprogramma wilt gebruiken, klikt u op [Overschrijven].
0CSC-048 De machine als printer gebruiken Er zijn verschillende manieren om de machine als printer te gebruiken. U kunt documenten op uw computer afdrukken via het printerstuurprogramma, afbeeldingsbestanden afdrukken vanaf een USB-geheugenapparaat of afdrukken vanaf draagbare apparaten met Google Cloudprinter™ of AirPrint. Kies in elke situatie de afdrukfunctie die het best aansluit bij uw wensen.
0CSC-049 Afdrukken vanaf een computer Documenten die u met een programma op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Het printerstuurprogramma heeft een aantal handige instellingen, zoals vergroten/verkleinen en dubbelzijdig afdrukken, waarmee u uw documenten op verschillende manieren kunt afdrukken. U kunt de afdrukfunctie van de machine pas gebruiken nadat u enkele procedures hebt doorlopen, zoals het installeren van het printerstuurprogramma op uw computer.
㻝㻥㻟㻌㻛㻌㻢㻤㻠
0CSC-04C Een document afdrukken In dit gedeelte wordt beschreven hoe u een document op uw computer afdrukt via het printerstuurprogramma. 1 Open een document in een programma en geef het afdrukvenster weer. De manier waarop u het afdrukvenster weergeeft, kan per programma verschillen. Raadpleeg voor meer informatie de Help van het programma dat u gebruikt. 2 Selecteer het printerstuurprogramma voor het apparaat en klik op [Preferences] (Voorkeuren) (of [Properties] (Eigenschappen)).
afdrukinstellingen opslaan 4 Klik op [Afdrukken] (of op [OK]). Het afdrukken wordt gestart. In sommige programma's verschijnt het onderstaande scherm. Als u het afdrukken wilt annuleren, klikt u op [Annuleren] als het bovenstaande scherm wordt weergegeven. Nadat het scherm Afdrukken verdwijnt of als het scherm niet wordt weergegeven, kunt u het afdrukken op andere manieren annuleren.
0CSC-04E Afdrukken annuleren U kunt het afdrukken annuleren vanaf uw computer of vanaf het bedieningspaneel van de machine. Vanaf een computer Vanaf het bedieningspaneel Vanaf een computer U annuleert het afdrukken vanaf het pictogram van de printer dat wordt weergegeven in het systeemvak van het bureaublad. 1 Dubbelklik op het printerpictogram.
Vanaf het bedieningspaneel Annuleer het afdrukken met Druk op of (Statusmonitor). om te annuleren Als op het scherm een lijst met documenten verschijnt als u op Druk op / Druk op hebt gedrukt om het document te selecteren waarvan u het afdrukken wilt annuleren. (Statusmonitor) om te annuleren (Statusmonitor)
0CSC-04F Afdrukstatus en logboeken controleren U kunt de actuele afdrukstatus en de logboeken voor afgedrukte documenten controleren. Handig in de volgende situaties Als het erg lang duurt voordat uw documenten worden afgedrukt, kunt u de wachtrij bekijken met de documenten die nog niet zijn afgedrukt. Als u de afdrukken niet kunt vinden die nu toch echt klaar hadden moeten zijn, kunt u controleren of er een fout is opgetreden. 1 2 3 Druk op Druk op (Statusmonitor).
Hier ziet u een lijst met de documenten die zijn afgedrukt. geeft aan dat een document zonder problemen is afgedrukt, en betekent dat een document niet is afgedrukt omdat de bewerking is geannuleerd of omdat er een fout is opgetreden. Hier ziet u gedetailleerde gegevens van het document dat u in de lijst hebt geselecteerd. De weergegeven documentnaam of gebruikersnaam komt mogelijk niet overeen met de werkelijke document- of gebruikersnaam.
0CSC-04H Verschillende afdrukinstellingen Er zijn verschillende afdrukinstellingen die u kunt kiezen, zoals vergroot/verkleind afdrukken en dubbelzijdig afdrukken.
0CSC-04J Vergroten of verkleinen U kunt afdrukken vergroten of verkleinen door een vooraf ingesteld zoompercentage voor afdrukken te selecteren, zoals A5 naar A4. U kunt ook zelf een aangepast zoompercentage kiezen, dat u kunt verhogen of verlagen in stappen van 1%.
Dit kan zich uiten in grote lege vlakken op de afdruk of delen van het document die ontbreken. De instellingen voor vergroten/verkleinen in bepaalde programma's hebben prioriteit boven de desbetreffende instellingen in het printerstuurprogramma.
0CSC-04K Schakelen tussen enkelzijdig en dubbelzijdig afdrukken (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Als u werkt met de MF8580Cdw / MF8550Cdn / MF8540Cdn, kunt u enkelzijdig en dubbelzijdig afdrukken. De standaardinstelling is [Dubbelzijdig afdrukken]. Pas de instelling desgewenst aan. OPMERKING Dubbelzijdig afdrukken is mogelijk niet voor alle formaten en soorten papier beschikbaar.
KOPPELINGEN Een document afdrukken Meerdere pagina's op één vel afdrukken Boekje afdrukken (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) 㻞㻜㻠㻌㻛㻌㻢㻤㻠
0CSC-04L Afdrukken sorteren per pagina Als u afdrukken wilt maken van documenten met meerdere pagina's, selecteert u [Sorteren] om complete sets op volgorde af te drukken. Deze functie is handig bij het voorbereiden van hand-outs voor vergaderingen of presentaties. tabblad [Algemene instellingen] selecteer [Sorteren] of [Groeperen] bij [Afwerking] [OK] [Afwerking] Geef de sorteermethode van de afdrukken op wanneer u documenten met meerdere pagina's afdrukt.
0CSC-04R Meerdere pagina's op één vel afdrukken U kunt meerdere pagina's afdrukken op één vel papier. Zo kunt u vier of negen pagina's afdrukken op één vel door [4 op 1] of [9 op 1] te gebruiken. Gebruik deze functie als u papier wilt besparen of een document wilt bekijken als miniaturen. OPMERKING U kunt nog meer papier besparen door deze instelling te combineren met dubbelzijdig afdrukken.
0CSC-04S Posters afdrukken U kunt één pagina van een document verspreid over meerdere pagina's afdrukken. Als u een document met één pagina van het formaat A4 bijvoorbeeld negen keer zo groot maakt, hebt u een poster van 3x3 vellen A4-formaat nadat u het document hebt afgedrukt en de vellen aan elkaar hebt geplakt.
0CSC-04U Boekje afdrukken (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt twee pagina's van een document op beide zijden van één vel papier afdrukken en dan de bedrukte pagina's dubbelvouwen om een boekje te maken. Het printerstuurprogramma regelt de afdrukvolgorde, zodat de paginanummers kloppen. OPMERKING Boekje afdrukken is mogelijk niet voor alle formaten en soorten papier beschikbaar. Het papier dat beschikbaar is voor Papier. dubbelzijdig afdrukken, is ook beschikbaar voor boekje afdrukken.
Als u een nietmachine of een ander inbindgereedschap gebruikt, geeft u de breedte van de rugmarge op voor het inbinden van het boekje. Schakel het selectievakje [Geef Rugmarge boekje op] in en geef de breedte van de marge op bij [Rugmarge boekje].
0CSC-04W Randen afdrukken U kunt randen, zoals stippellijnen of dubbele ononderbroken lijnen, toevoegen aan de marges van afdrukken. tabblad [Pagina-instelling] klik op [Pagina opties] selecteer het type rand bij [Kader] [Kader] Selecteer hier het type rand. Voorbeeld Hier ziet u een voorbeeld met de geselecteerde rand.
0CSC-04X Datums en paginanummers afdrukken U kunt de informatie zoals datums of paginanummers afdrukken. Daarnaast kunt u aangeven waar in het document u deze informatie wilt afdrukken (linksboven, rechtsonder, enzovoort). Tabblad [Pagina-instelling] het paginanummer [OK] klik op [Pagina opties] [OK] selecteer de afdrukpositie van de afdrukdatum, de gebruikersnaam of [Afdrukdatum] Geef de positie aan voor het afdrukken van de afdrukdatum.
0CSC-04Y Afdrukken met watermerk U kunt een watermerk zoals "KOPIE" of "VERTROUWELIJK" afdrukken over het document. U kunt nieuwe watermerken maken of vooraf geregistreerde watermerken gebruiken. Tabblad [Pagina-instelling] [OK] schakel het selectievakje [Watermerk] in selecteer een watermerk in [Watermerknaam] [Watermerk]/[Watermerknaam] Schakel het selectievakje [Watermerk] in om de beschikbare watermerken weer te geven in de vervolgkeuzelijst [Watermerknaam]. Selecteer een watermerk in de lijst.
KOPPELINGEN Een document afdrukken Randen afdrukken Datums en paginanummers afdrukken 㻞㻝㻟㻌㻛㻌㻢㻤㻠
0CSC-050 Kleurenmodus instellen U kunt een kleurenmodus selecteren (kleur of zwart-wit). Als een document pagina's bevat in zowel kleur als zwartwit, kiest u de instelling Auto (Kleur/Z-W) om kleurenpagina's automatisch in kleur af te drukken en zwartwitpagina's automatisch in zwart-wit. tabblad [Algemene instellingen] selecteer de kleurenmodus bij [Kleurenmodus] [OK] [Kleurenmodus] Selecteer [Zwart-wit] of [Kleur].
OPMERKING Klik voor meer informatie op [Help] in het printerstuurprogramma.
0CSC-051 Papierbron opgeven Als u op bepaald papier wilt afdrukken, geeft u aan in welke papierbron het papier is geladen dat u wilt gebruiken. OPMERKING Ga pas afdrukken nadat u het formaat en het type papier hebt opgegeven dat is geladen in de papierbron.
Selecteer [Papierbron] zoals in het voorbeeld dat hierboven wordt beschreven wanneer u specifiek papier wilt gebruiken voor bepaalde pagina's. [Papierselectie] Selecteer hoe u papier wilt opgeven zoals [Verschillend voor voorblad en overige pagina's]* of [Verschillend voor eerste, overige en laatste pagina's]. Geef ook op welk papier moet worden gebruikt voor de omslag en de middenpagina's.
0CSC-052 Documenttype selecteren U kunt het type document opgeven om zo een optimale beeldkwaliteit te garanderen. Er zijn verschillende instellingen voor fotodocumenten, documenten met grafieken en tabellen, en documenten met CADtekeningen met zeer dunne lijntjes. tabblad [Kwaliteit] selecteer het type document bij [Doel] [OK] [Doel] Selecteer een optie die het best past bij het type document of het doel van de afdruk.
0CSC-053 Toner besparen U kunt in het printerstuurprogramma instellen dat documenten met minder toner worden afgedrukt. BELANGRIJK Als de tonerspaarstand is ingeschakeld, bestaat de kans dat dunne lijnen en delen met een lichtere afdrukdichtheid vaag worden.
0CSC-054 Meerdere documenten combineren en afdrukken Met behulp van Canon PageComposer kunt u meerdere documenten samenvoegen tot één afdruktaak en de taak afdrukken met de opgegeven afdrukinstellingen. Op deze manier kunt u bijvoorbeeld documenten combineren die met verschillende programma's zijn gemaakt en alle pagina's op hetzelfde papierformaat afdrukken. 1 Open een document in een programma en geef het afdrukvenster weer. De manier waarop u het afdrukvenster weergeeft, kan per programma verschillen.
5 Herhaal stappen 1 - 4 voor de documenten die u wilt combineren. De documenten worden toegevoegd aan Canon PageComposer. 6 Selecteer in de lijst [Document Name] (Documentnaam) de documenten die u wilt combineren en klik op . U selecteert meerdere documenten door op de documenten te klikken terwijl u de toets [Shift] of [Ctrl] ingedrukt houdt. 7 Wijzig de instellingen desgewenst en klik op [Combineren]. De documenten die zijn geselecteerd in stap 6 worden gecombineerd.
OPMERKING: Klik voor meer informatie op [Help] in Canon PageComposer. [Details] Hiermee geeft u het scherm met afdrukinstellingen van het printerstuurprogramma weer. Er zijn minder instellingen beschikbaar dan bij gewoon afdrukken. 8 Selecteer in de lijst [Document Name] (Documentnaam) de gecombineerde afdruktaak die u wilt afdrukken en klik op . Het afdrukken wordt gestart. Raadpleeg Afdrukken annuleren voor instructies voor het annuleren van het afdrukken.
0CSC-055 Printerinstellingen configureren op het apparaat Wanneer u een document afdrukt vanaf een computer, kunt u verschillende afdrukinstellingen opgeven in het programma waarmee u het document hebt gemaakt of in het printerstuurprogramma. Denk hierbij aan instellingen zoals het aantal exemplaren en de kleurenmodus. De hieronder beschreven instelling kan echter alleen op het apparaat worden opgegeven.
0CSC-056 Een document afdrukken dat is beveiligd met een pincode (beveiligd afdrukken) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Als u gaat afdrukken vanaf een computer, kunt u een pincode instellen voor een document. Het document blijft dan in het geheugen van het apparaat staan en wordt pas afgedrukt nadat op het bedieningspaneel van het apparaat de juiste pincode is ingevoerd.
0CSC-057 Instellingen configureren voor beveiligd afdrukken Zorg ervoor dat Beveiligd afdrukken is ingeschakeld in het printerstuurprogramma. BELANGRIJK Om de onderstaande procedure uit te voeren, moet u zich bij de computer aanmelden met een administratoraccount. 1 2 3 Open de printermap. De printermap weergeven Klik met de rechtermuisknop op het printerpictogram en klik op [Printer Properties] (Eigenschappen van printer) (of [Properties] (Eigenschappen)).
0CSC-058 Documenten beveiligd afdrukken In dit gedeelte wordt uitgelegd hoe u een document vanuit een programma kunt afdrukken als een beveiligd document. Er wordt eerst beschreven hoe u een beveiligd document naar de machine stuurt en daarna kunt u lezen hoe u het beveiligde document kunt afdrukken.
4 Geef de afdrukinstellingen op en klik op [OK]. Klik op de tabbladen [Algemene instellingen], [Pagina-instelling], [Afwerking], [Papierbron] of [Kwaliteit] om indien nodig de Verschillende afdrukinstellingen gewenste afdrukinstellingen op elk scherm op te geven. 5 Klik op [Afdrukken] (of op [OK]). 6 Controleer de documentnaam, de gebruikersnaam en de pincode en klik op [OK]. [Documentnaam] De documentnaam wordt automatisch ingesteld op basis van de informatie uit het programma.
Voer de pincode van maximaal zeven cijfers in. De ingevoerde pincode wordt weergegeven met symbolen. Nadat het beveiligde document naar het apparaat is verzonden, blijft het document in het geheugen wachten om te worden afgedrukt. Beveiligde documenten afdrukken Als u een beveiligd document naar het apparaat hebt verstuurd, moet u het document binnen 30 minuten afdrukken. Als die tijd is verstreken, wordt het document verwijderd uit het geheugen van het apparaat en kunt u het document niet meer afdrukken.
De periode instellen waarna beveiligde documenten worden verwijderd De standaardinstelling van het apparaat is dat beveiligde documenten 30 minuten na ontvangst in het geheugen worden verwijderd als ze nog niet zijn afgedrukt. U kunt deze instelling echter wijzigen. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als het aanmeldingsscherm verschijnt, gebruikt u de numerieke toetsen om de juiste combinatie van ID en pincode in te voeren. .
0CSC-059 De gewenste afdrukinstellingen configureren U kunt combinaties van instellingen opslaan als "Profielen" om te voldoen aan uw diverse afdrukbehoeften. U kunt de instellingen die u vaak gebruikt ook opslaan als de standaardinstelling. Zodra de standaardinstelling is ingesteld, worden de opgeslagen instellingen automatisch weergegeven op het scherm van het printerstuurprogramma en kunt u de handelingen overslaan om de afdrukinstellingen op te geven en kunt u onmiddellijk afdrukken.
0CSC-05A Combinaties van veelgebruikte afdrukinstellingen opslaan Als u bij elke afdruktaak instellingen moet opgeven om bijvoorbeeld "enkelzijdig af te drukken op A4-papier in de afdrukstand Liggend", kan dit nogal tijdrovend en vervelend worden. Als u deze veelgebruikte combinaties van afdrukinstellingen echter opslaat als een "profiel", kunt u de gewenste afdrukinstellingen eenvoudig opgeven door het bijbehorende profiel te laden.
OPMERKING De instellingen van het geselecteerde profiel wijzigen U kunt de instellingen van een profiel wijzigen. Desgewenst kunt u de gewijzigde instellingen opslaan als een ander profiel.
0CSC-05C De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven als u het scherm met afdrukinstellingen van het printerstuurprogramma opent. U kunt deze instellingen echter wijzigen. Als u bijvoorbeeld alle documenten, dus ook documenten in kleur, in zwart-wit wilt afdrukken, kunt u de standaardinstelling voor de kleurenmodus wijzigen in [Zwart-wit].
0CSC-05E Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenapparaten) U kunt afbeeldingsbestanden die zijn opgeslagen op een USB-geheugenapparaat afdrukken door het USB-geheugenapparaat rechtstreeks op het apparaat aan te sluiten. Als u deze functie gebruikt, kunt u afdrukken zonder een computer te gebruiken. Ondersteunde bestandsindelingen U kunt de volgende soorten afbeeldingsbestanden afdrukken. JPEG (DCF/Exif 2.
2 3 Druk op Druk op (USB PRINT). / om te selecteren en druk vervolgens op . OPMERKING: Afdrukken als Index U kunt miniaturen afdrukken van de afbeeldingsbestanden (alleen JPEG) die zijn opgeslagen op een USB-geheugenapparaat. Als u de afbeeldingen wilt afdrukken als miniaturen, selecteert u in het scherm en gaat u verder met de volgende stap. 4 Selecteer het bestand dat u wilt afdrukken en druk op . U kunt meerdere bestanden selecteren.
2 Selecteer en druk op . 3 Selecteer de weergavemethode en druk op . Selecteer deze optie om bestandsnamen en datums weer te geven. OPMERKING: U kunt instellen dat bestandsnamen in verkorte vorm worden weergegeven. Bestandsnaam Weergavestijl Kies deze optie om voorbeelden weer te geven. Druk op Druk op / om een bestand te selecteren. om door de voorbeelden te bladeren. Druk op voor een groter voorbeeld. Druk nogmaals op weer te geven.
3 Selecteer de criteria voor het sorteren van bestanden en druk op . OPMERKING: Wanneer u of selecteert, worden bestanden gesorteerd op basis van de datum en tijd van wijziging van de bestanden. 5 Druk op . 6 Geef de gewenste afdrukinstellingen op. Gebruik / om de instellingen te selecteren, druk op en geef elke instelling op. Druk op / of de numerieke toetsen om het gewenste aantal kopieën op te geven.
U kunt twee of vier documenten op één vel papier afdrukken. Gebruik . druk vervolgens op / om <2 op 1> of <4 op 1> te selecteren en <2 op 1> Kies deze optie om twee documenten op één vel af te drukken. <4 op 1> Kies deze optie om vier documenten op één vel af te drukken. OPMERKING: is niet beschikbaar voor het afdrukken van TIFF-bestanden. <2-Zijdig> (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt dubbelzijdige afdrukken maken.
OPMERKING: Hoewel niet beschikbaar is voor het afdrukken van een index, wordt de wijzigingsdatum van het bestand automatisch onder elke afbeelding afgedrukt. U kunt de bestandsnaam afdrukken onder elk document. Druk op . / om te selecteren en druk vervolgens op OPMERKING: Hoewel niet beschikbaar is voor het afdrukken van een index, wordt de bestandsnaam automatisch onder elke afbeelding afgedrukt.
U kunt de afdrukmethode selecteren om halftonen te reproduceren (het tussenliggende bereik tussen de lichtere en / om of te donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. Druk op . selecteren en druk vervolgens op Kies deze optie om beelden met een fijne gradatie, zoals beelden van een digitale camera, mooi gemaskeerd af te drukken. Kies deze optie om beelden met kleine tekst of dunne lijnen scherp af te drukken.
0CSC-05F De standaardinstellingen voor afdrukken wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft op te geven als u gaat afdrukken.
0CSC-05H Google Cloudprinter gebruiken Google Cloudprinter is een service waarmee gebruikers met een Google-account kunnen afdrukken vanuit programma's zoals Google Documenten™ of Gmail™ via een smartphone, tablet of computer die is verbonden met internet. In tegenstelling tot het traditionele afdrukken vanaf een computer, is Google Cloudprinter een nieuwe technologie waarmee u kunt afdrukken door een printer rechtstreeks te verbinden met het web.
0CSC-05J Afdrukken met Google Cloudprinter voorbereiden Als u wilt afdrukken met Google Cloudprinter, moet de machine zijn geregistreerd bij Google Cloudprinter. OPMERKING U kunt Google Cloudprinter alleen gebruiken met een Google-account. Als u die nog niet hebt, gaat u naar de website van Google en maakt u een account aan.
2 Klik op [Instellingen/Registratie]. 3 Klik op [Netwerkinstellingen] 4 Klik op [Registreren...] in [Registratiestatus Google Cloud-afdruk]. [Instellingen Cloud-afdrukken]. OPMERKING Als [Registreren...] niet beschikbaar is U moet Google Cloudprinter inschakelen. Klik op [Bewerken...], schakel het selectievakje [Cloud-afdruk gebruiken] in, klik op [OK] en start het apparaat opnieuw op.
6 Volg de aanwijzingen op het scherm om de machine te registreren.
0CSC-05K Afdrukken met Google Cloudprinter Wanneer u vanaf uw computer of smartphone afdrukgegevens verstuurt via Google Cloudprinter, worden deze gegevens ontvangen op de machine en automatisch afgedrukt. 1 2 Controleer of het apparaat is ingeschakeld. Geef het afdrukvenster weer vanuit een programma op uw computer of smartphone.
0CSC-05L AirPrint gebruiken U hebt niet altijd een computer nodig voor het afdrukken van foto's, e-mails, webpagina's en andere documenten. Met AirPrint kunt u draadloos afdrukken van Apple-apparaten zoals een iPad, iPhone, iPod touch en Macintosh zonder dat u het printerstuurprogramma hoeft te gebruiken.
OPMERKING: De beschikbare instellingen in [Printer Options] (Printeropties) verschillen afhankelijk van het programma dat u gebruikt. De beschikbare papierformaten verschillen afhankelijk van het programma dat u gebruikt. 6 Tik op [Print] (Druk af). Het afdrukken wordt gestart.
Annuleren vanaf een Mac 1 2 3 Klik op het printerpictogram dat wordt weergegeven in het Dock op het bureaublad. Klik op het document dat u wilt annuleren. Klik op de knop [Delete] (Verwijder). Problemen oplossen bij het afdrukken met AirPrint U kunt niet afdrukken met AirPrint. Controleer of het apparaat is ingeschakeld. Als dat het geval is, start u de machine opnieuw op en kijkt u of het probleem is opgelost. Controleer of er papier in de machine is geladen en of er nog voldoende toner is.
4 Klik op [Bewerken...]. 5 Geef de vereiste instellingen op en klik op [OK]. [AirPrint gebruiken] Schakel dit selectievakje in om afdrukken via AirPrint mogelijk te maken. Schakel het selectievakje uit om AirPrint uit te schakelen. [Printernaam]/[Locatie]/[Breedtegraad]/[Lengtegraad] Voer de naam en de installatielocatie in om dit apparaat eenvoudig te herkennen vanaf uw Apple-apparaat. Deze informatie is handig als u meerdere AirPrint-printers gebruikt.
Verbruiksartikelen controleren op de Mac U kunt het scherm van AirPrint weergeven om toegang te krijgen tot de verschillende AirPrint-instellingen, maar ook om gegevens van verbruiksartikelen te bekijken, zoals papier en toner. 1 2 3 4 Klik op [System Preferences] (Systeemvoorkeuren) in het Dock op het bureaublad (Afdrukken en scannen). [Print & Scan] Selecteer uw printer en klik op [Options & Supplies] (Opties en toebehoren). Klik op [Show Printer Webpage] (Geef webpagina van printer weer).
0CSC-05R De machine als scanner gebruiken U kunt originele documenten scannen door het bedieningspaneel van het apparaat of een programma op een computer te gebruiken. Welke manier u ook gebruikt, de gescande documenten worden geconverteerd naar elektronische bestandsindelingen zoals PDFbestanden. Gebruik de scanfunctie om omvangrijke papieren documenten te converteren naar bestanden zodat u deze gemakkelijk kunt ordenen.
0CSC-05S Het gebruik van het apparaat als een scanner voorbereiden Zorg ervoor dat het apparaat en uw computer met elkaar verbonden zijn en dat alle software is geïnstalleerd ( Verbinding met een computer). Om verbinding te maken via een draadloze of bekabelde LAN, moet u dit apparaat registreren in MF Network Scan Utility (MF Netwerkscanprogramma). Registreer het apparaat volgens de onderstaande procedure. Deze procedure is niet vereist als het apparaat en uw computer verbonden zijn via USB.
0CSC-05X Scannen vanaf het apparaat De volgorde van het scannen van een document en het opslaan op een computer kan alleen worden uitgevoerd wanneer vanaf het apparaat wordt gescand. Voer de scan uit terwijl u opgeeft op welke computer de documenten worden opgeslagen, geef op of de documenten in kleur of in zwart-wit worden gescand, of de documenten worden opgeslagen als PDF- of JPEG-bestanden en geef de overige instellingen op. 1 2 3 4 Plaats één of meer documenten. Druk op .
OPMERKING: Instellingen wijzigen U kunt instellingen wijzigen vanaf MF Toolbox. 6 Druk op Scaninstellingen configureren in MF Toolbox . Het scannen wordt gestart. Om te annuleren drukt u op . BELANGRIJK: U kunt niet scannen als het instelscherm van MF Toolbox wordt weergegeven. Sluit het scherm voordat u gaat scannen. Als u in stap 1 documenten in de documentinvoer plaatst Wanneer het scannen is voltooid, wordt de doelmap voor de opslag op de computer weergegeven.
Overige nuttige scanfuncties U kunt gescande documenten opslaan op een USB-geheugenapparaat of deze als e-mailbijlagen verzenden. De documenten kunnen ook worden opgeslagen in gedeelde mappen. U kunt deze functies rechtstreeks vanaf het apparaat uitvoeren.
0CSC-060 Scannen met de [Scan > PC]-toets Plaats een document op het apparaat en druk op of . Het scannen wordt onmiddellijk gestart. Het type scan (kleur of zwart-wit), de doelmap voor de opslag van het document en andere instellingen kunnen op een toets worden opgeslagen en documenten kunnen worden gescand met deze instellingen. In dit gedeelte wordt beschreven hoe u instellingen kunt opslaan in een toets en hoe u met deze instellingen kunt scannen.
7 Selecteer het scantype en druk op Type scan . Kleur Resolutie Bestandsindeling Kleur 300 dpi PDF (doorzoekbaar)*1/Hoog compressieniveau Zwart-wit *2 300 dpi TIFF Kleur 300 dpi JPEG/Exif Kleur 300 dpi PDF (doorzoekbaar)*1/ Standaardcompressieniveau *1 Een PDF-indeling waarbij de tekens op het document als tekstgegevens worden gescand en waarbij naar de tekst kan worden gezocht met behulp van een computer.
2 Druk op of Raadpleeg . De opgeslagen instellingen controleren om de instellingen die in de toets zijn opgeslagen, te controleren. Het scannen wordt gestart. Om te annuleren drukt u op . BELANGRIJK: U kunt niet scannen als het instelscherm van MF Toolbox wordt weergegeven. Sluit het scherm voordat u gaat scannen. Als u in stap 1 documenten in de documentinvoer plaatst Wanneer het scannen is voltooid, wordt de doelmap voor de opslag op de computer weergegeven.
KOPPELINGEN Scannen vanaf het apparaat 㻞㻢㻜㻌㻛㻌㻢㻤㻠
0CSC-0HK Scannen vanaf een computer Er zijn twee manieren om te scannen vanaf een computer: met behulp van MF Toolbox en met behulp van een toepassing zoals een beeldbewerkings- of tekstverwerkingsprogramma. Scannen met MF Toolbox MF Toolbox is een programma dat bij het apparaat wordt geleverd en waarmee u documenten of afbeeldingen naar een computer kunt scannen. U kunt de gescande gegevens doorsturen naar een opgegeven programma of deze toevoegen aan een e-mailbericht.
0CSC-062 Scannen met MF Toolbox U kunt gescande documenten opslaan op een computer, ze doorsturen naar een opgegeven programma om ze te bewerken of ze toevoegen aan een e-mailbericht. MF Toolbox bevat voorinstellingen voor alle doeleinden, inclusief het converteren naar PDF en het scannen van kleurendocumenten. U kunt gemakkelijk scannen door een voorinstelling te selecteren. Vanaf het bedieningspaneel 1 2 3 Plaats één of meer documenten. Druk op .
OPMERKING: Een andere scanner gebruiken Als er twee of meer apparaten geïnstalleerd zijn en u wilt overschakelen naar een ander apparaat, klikt u op [Instellingen] en Instellingen voor MF Toolbox en de scanner configureren selecteert u het apparaat. 6 Configureer de scaninstellingen. 7 Klik op [Starten]. Scaninstellingen configureren in MF Toolbox Het scannen wordt gestart. Klik op [Annuleren] om te annuleren.
Als de verwachte scanresultaten niet worden bereikt, bijvoorbeeld als de afbeelding te donker is of de kleur anders is dan het origineel, kunt u geavanceerde scaninstellingen configureren met ScanGear MF. Plaats het document opnieuw, schakel het selectievakje [Scannerstuurprogramma weergeven] in op het scherm in stap 6 en klik op [Starten] om ScanGear MF te starten.
Als u de bestandsindeling [JPEG/Exif] selecteert, kunt u informatie zoals de datum of opmerkingen toevoegen aan JPEG-bestanden wanneer u deze gaat opslaan. Selecteer de gescande afbeelding, klik op [Exif-instellingen] en typ de opmerkingen in het weergegeven scherm. [Gescande afbeelding opslaan in] Geef een doelmap voor de opslag op.
Klik op [Annuleren] om te annuleren. Als u documenten in de documentinvoer plaatst Wanneer het scannen is voltooid, wordt het gescande document opgeslagen in een map op de computer of Opslaginstellingen configureren Externe toepassingen opgeven voor doorgestuurd naar een programma. het doorsturen van gescande gegevens Als u documenten op de glasplaat legt Het onderstaande scherm wordt weergegeven.
KOPPELINGEN Scaninstellingen configureren in MF Toolbox 㻞㻢㻣㻌㻛㻌㻢㻤㻠
0CSC-063 Scaninstellingen configureren in MF Toolbox U kunt de voorinstellingen, zoals het type scan (kleur of zwart-wit), de bestandsindeling en de resolutie, wijzigen volgens het beoogde gebruik. U kunt ook een opslagbestemming voor het gescande document opgeven, een programma als doorstuurbestemming en andere instellingen opgeven.
[Auto-modus] plaatst, worden de documenten gescand die op de glasplaat worden geplaatst. [Invoermethode] (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Selecteer of u een enkelzijdig of dubbelzijdig document dat in de documentinvoer wordt geplaatst, wilt scannen. [Papierformaat] Selecteer het formaat van het document. Als u een optie selecteert voor een aangepast formaat, wordt het scherm [Instellingen van papierformaat] geopend. U kunt vervolgens een aangepast formaat invoeren.
Opslaginstellingen configureren Geef instellingen op voor de gescande gegevens, zoals de bestandsnaam, de bestandsindeling (PDF, JPEG, enzovoort) en de opslagbestemming. [Bestandsnaam] Voer hier een naam in voor het gescande afbeeldingsbestand. OPMERKING: Als op de opslagbestemming al een bestand met dezelfde naam bestaat, wordt er een uniek getal van vier opeenvolgende cijfers (bijvoorbeeld "0001") toegevoegd aan de bestandsnaam. [Opslaan als type] Selecteer de bestandsindeling.
[PDF] [Kl.scan] [ZW-scan] [Aangep.1] * [Aangep.2] * * Niet beschikbaar als [Scanmodus] is ingesteld op [Zwart-wit] of [Zwart-wit (OCR)]. Scaninstellingen configureren Als er een bericht verschijnt om aan te geven dat het afbeeldingsformaat te groot is Verlaag de waarde van [Beeldkwaliteit].
[Verwijderen] Als u het gescande document niet wilt doorsturen naar een programma, zoals wanneer u het opslaat, klikt u op deze knop. [Instellen] Klik op deze knop en selecteer een programma. Of geef een programma op door het pictogram ervan hiernaartoe te slepen als dit geen e-mailprogramma is. OPMERKING: Ondersteunde e-mailprogramma's Microsoft Outlook Express Microsoft Outlook Microsoft Exchange EUDORA Netscape Messenger Windows Mail Becky! Ver.
0CSC-061 Scannen vanuit een programma Scan het document door een programma te gebruiken. U kunt Adobe Photoshop, Microsoft Office Word of andere beeldbewerkings- en tekstverwerkingsprogramma's gebruiken. De gescande afbeelding wordt rechtstreeks in het programma geladen waardoor u de afbeelding onmiddellijk kunt bewerken of verwerken. De volgende procedure verschilt afhankelijk van het programma. BELANGRIJK Het programma moet compatibel zijn met TWAIN of WIA * .
Scaninstellingen configureren in ScanGear MF 㻞㻣㻠㻌㻛㻌㻢㻤㻠
0CSC-064 Scaninstellingen configureren in ScanGear MF ScanGear MF is een scannerstuurprogramma dat bij het apparaat wordt geleverd. U kunt ScanGear MF als volgt gebruiken. Starten vanuit MF Toolbox Als u scant vanuit MF Toolbox, kunt u ScanGear MF oproepen en geavanceerde scaninstellingen configureren. Schakel het Scannen selectievakje [Scannerstuurprogramma weergeven] in en klik op [Starten] in MF Toolbox om ScanGear MF te starten.
0CSC-0HL Scaninstellingen configureren in de eenvoudige modus Eenvoudige modus is een verzameling van basisscaninstellingen in ScanGear MF die zijn ontworpen voor een gemakkelijke bediening. Dit betekent dat Eenvoudige modus een gecomprimeerde versie is van ScanGear MF. Configureer instellingen in de volgorde die is tot en met op het scherm en klik op [Scannen]. Hierdoor kunt u de basisinstellingen configureren en het scannen opgegeven van starten.
Als u het document in de documentinvoer hebt geplaatst [Doc. (kleur) ADF] Het document wordt gescand als een kleurenafbeelding. [Doc. (grijswrden) ADF] Het document wordt gescand als een afbeelding met grijswaarden. [Doel selecteren] Selecteer een instelling op basis van het beoogde gebruik van de gescande afbeelding. [Afdrukken (300 dpi)] Selecteer deze optie als u de gescande afbeelding afdrukt.
0CSC-0HR Scaninstellingen configureren in de geavanceerde modus Als u op het tabblad [Geavanceerde modus] op het ScanGear MF-scherm klikt, kunt u meer geavanceerde aanpassingen in de beeldkwaliteit maken dan mogelijk is in de Eenvoudige modus. U kunt aangepaste instellingen ook opslaan als favoriete instellingen. Klik naast het onderwerp voor meer details.
(De afbeelding verplaatsen) Sleept de afbeelding om het zichtbare gedeelte van de afbeelding te verplaatsen wanneer een voorbeeld wordt vergroot. (Zoomen) Vergroot de volledige voorbeeldafbeelding. Klik met de linkermuisknop om in te zoomen. Klik met de rechtermuisknop op de vergrote afbeelding om uit te zoomen. Als u een gedeelte van de afbeelding wilt vergroten om details te bekijken, gebruikt u [Zoomen] ( ).
Het afbeeldingsformaat dat kan worden gescand, is bij sommige programma's beperkt. Als u documenten in de documentinvoer plaatst, stelt u de afdrukstand van de documenten in in [Afdrukstand]. U kunt ook [Inbindlocatie] instellen als u dubbelzijdige documenten in de documentinvoer plaatst. [Kleurenmodus] Selecteer het type afbeelding om documenten te scannen. [Zwart-wit] Het document wordt gescand als een zwart-wit afbeelding (alleen in zwart en wit, dus zonder tussenliggende grijstinten).
Selecteer [Aanpasbaar] om het uitvoerformaat en de verhouding tussen de breedte en de hoogte te wijzigen. Sleep het gebied dat u wilt scannen op de voorbeeldafbeelding of voer waarden voor de breedte en de hoogte in. Als u het vergrotingspercentage opgeeft in het [%]-invoerveld aan de rechterkant van de invoervelden voor de breedte en de hoogte, wordt het document vergroot of verkleind voor het scannen.
Configureer kleurinstellingen zoals helderheid, contrast en kleur. De weergegeven items zijn afhankelijk van de instellingen die zijn geselecteerd bij [Kleurenmodus] ( Instellingen opgeven voor documenten en kleurenmodus). Als [Tekstverbetering] is geselecteerd, kunt u deze instellingen niet configureren. (Helderheid/contrast) Past de helderheid en het contrast (het verschil tussen de lichte en donkere delen) van de afbeelding aan.
Klik op de delen van de voorbeeldafbeelding (of het bijsnijdkader) die u wilt opgeven als het donkerst, het , of . Of voer een waarde in. middelst en het lichtst. Schuif met (Pipet voor grijsbalans) Klik op een deel van de voorbeeldafbeelding (of het bijsnijdkader) dat u wilt renderen als een achromatische kleur (zwart, grijs of wit) die geen kleurdiepte heeft. De kleurtint op de rest van de afbeelding wordt aangepast en daarbij is het deel waarop is geklikt, het gemiddelde.
[Drempelniveau] of voer een waarde in. Om meer delen als zwart te renderen, schuift u met Schuif met voert u een hogere waarde in. naar rechts of Instellingen opslaan of oproepen Roep opgeslagen helderheids- of kleurinstellingen op voor tot en . Veelgebruikte instellingen opslaan Overige instellingen opgeven Klik op [Voorkeuren] om verschillende instellingen te configureren, zoals de bediening tijdens het scannen.
[Scannen zonder het ScanGear-venster te gebruiken] Wanneer u het document scant met behulp van OCR-software of een ander programma, wordt het ScanGear MFscherm mogelijk niet weergegeven. In dit geval wordt het document gescand met de instelling van het programma dat wordt toegepast. Als het programma echter niet over de volgende instellingen beschikt, kunt u deze hier inschakelen, zodat deze instellingen worden toegepast voor het scannen.
[Map voor tijdelijke bestanden] Klik op [Bladeren] om de map voor het tijdelijk opslaan van een afbeelding, te wijzigen. [Geluidsinstellingen] U kunt aangeven welke muziek of geluiden het apparaat moet afspelen tijdens het scannen of wanneer het scannen is voltooid. Klik op [Bladeren] om een bestand dat moet worden afgespeeld, op te geven. De volgende bestandsindelingen (extensies) worden ondersteund: MIDI-bestanden (.mid/.rmi/.midi) Audiobestanden (.wav/.aif/.aiff) MP3-bestanden (.
3 Selecteer [Toevoegen/verwijderen] in [Voorkeursinstellingen]. Het scherm [Favoriete instellingen toevoegen/verwijderen] wordt weergegeven. [Toevoegen/verwijderen] is beschikbaar wanneer de voorbeeldafbeelding wordt weergegeven. 4 Voer een naam in in [Naam instelling] en klik op [Toevoegen] [Opslaan]. Voer een naam in voor de instellingen die moeten worden opgeslagen. Gebruik een naam die gemakkelijk te vinden is in de vervolgkeuzelijst.
onderstaande procedure. 1 2 Plaats één of meer documenten en klik op [Voorbeeld]. Pas de helderheid of de kleur aan. Helderheid en kleur aanpassen Selecteer indien nodig de instellingen die u wilt opslaan. 3 Selecteer [Toevoegen/verwijderen] in de vervolgkeuzelijst. Het scherm [Tintcurve-instellingen toevoegen/verwijderen] of [Drempelinstellingen toevoegen/verwijderen] wordt weergegeven. 4 Voer een naam in in [Naam instelling] en klik op [Toevoegen] [Opslaan].
0CSC-0HS Eenvoudig scannen met een apparaatgebaseerde bewerking Het apparaat kan originele documenten converteren naar elektronische bestandsindelingen zoals PDF zonder een computer te gebruiken. Het digitaliseren van documenten heeft veel voordelen. U kunt kiezen tussen verschillende nuttige instellingen.
0CSC-066 Documenten rechtstreeks scannen naar een USB-geheugen Dit gedeelte beschrijft hoe u documenten kunt scannen en deze rechtstreeks opslaan op een USB-geheugenapparaat dat op het apparaat is aangesloten. U kunt de gescande documenten opslaan in PDF-, TIFF- of JPEG-indeling. Ondersteunde USB-geheugenapparaten U kunt USB-geheugenapparaten met de volgende bestandssystemen gebruiken.
Als u JPEG selecteert in , kan er maar één pagina worden gescand wanneer u het document op de glasplaat legt. Als u meerdere documenten tegelijk wilt scannen, moet u deze in de invoer plaatsen. Deze documenten worden dan als afzonderlijke bestanden gescand en opgeslagen. In het geval van PDF- of TIFF-bestanden kunt u meerdere documenten scannen en opslaan in één set bestanden, ongeacht of de documenten op de glasplaat worden gelegd of in de invoer. 6 Druk op .
㻞㻥㻞㻌㻛㻌㻢㻤㻠
0CSC-06C Documenten rechtstreeks vanaf het apparaat verzenden als e-mailberichten (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt meerdere bestemmingen opgeven, waaronder Cc- of Bcc-bestemmingen, net als bij het versturen van e-mails met een emailprogramma. 1 2 3 4 Plaats één of meer documenten. Druk op . Druk op / Documenten plaatsen om te selecteren en druk vervolgens op . Voer de bestemming in met de numerieke toetsen en druk op .
OPMERKING: U kunt of selecteren als bestandsindeling. De eerste naam van een gescand document wordt automatisch toegewezen op basis van de volgende indeling: nummer voor communicatiebeheer (vier cijfers)_datum en tijdstip van verzenden_documentnummer (drie cijfers).pdf. Voorbeeld van bestandsnamen: Als een document van één pagina wordt geconverteerd naar een PDF-bestand en verzonden op 17 oktober 2013 om 19:00:05 uur. 0045_131017190005_001.pdf U kunt niet zelf bestandsnamen opgeven.
6 Druk op . Het antwoordadres opgeven 1 Selecteer en druk op 2 Selecteer en druk op 3 Selecteer een antwoordadres in het adresboek en druk op Zie . . . Opgeven vanuit het adresboek voor informatie over het werken met het adresboek. Prioriteit instellen 1 Selecteer en druk op 2 Selecteer een prioriteit en druk op . .
8 Druk op om het verzenden te starten. Het scannen wordt gestart. Als u het verzenden wilt annuleren, drukt u op . Als u in stap 1 documenten in de documentinvoer plaatst De e-mail wordt verzonden zodra het scannen is voltooid. Als u in stap 1 documenten op de glasplaat legt Volg de onderstaande procedures wanneer het scannen is voltooid. 1 Als u extra pagina's van het document wilt scannen, legt u de volgende pagina op de glasplaat en drukt .
0CSC-078 Documenten rechtstreeks opslaan in een gedeelde map (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) OPMERKING Alleen bestemmingen in het adresboek kunnen worden gebruikt voor scannen naar gedeelde mappen. Als er geen bestemmingen zijn opgeslagen in het adresboek, moet u dat doen voordat u documenten kunt gaan scannen naar gedeelde mappen.
0045_131017190005_001.pdf U kunt niet zelf bestandsnamen opgeven. 6 Druk op om het scannen te starten. Het scannen wordt gestart. Als u het scannen wilt annuleren, drukt u op . Als u in stap 1 documenten in de documentinvoer plaatst Als het scannen is voltooid, worden de documenten opgeslagen in de gedeelde map.
0CSC-06E Het verzenden van documenten annuleren (E-mail/Gedeelde map) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Als u het verzenden wilt annuleren direct nadat u op hebt gedrukt, drukt u op Als op het scherm een lijst met documenten verschijnt als u op De documenten zijn gescand en wachten op verwerking. Druk op annuleren. / op het bedieningspaneel.
0CSC-06F Gedetailleerde instellingen opgeven In dit gedeelte worden de instellingen beschreven die u kunt kiezen als u documenten gaat scannen. Deze instellingen bevatten het opgeven van de bestandsindeling waarnaar documenten worden geconverteerd, het aanpassen van de dichtheid om de weergave van gescande documenten te verbeteren en ook de basisinstellingen zoals het opgeven van de afdrukstand of het scanformaat.
0CSC-06H Een scanformaat opgeven U kunt het scanformaat van documenten opgeven.
0CSC-06J Een bestandsindeling selecteren U kunt kiezen uit vier bestandsindelingen als u documenten gaat converteren: , , * en * . Gescande documenten worden geconverteerd naar de bestandsindeling die u hier opgeeft en dan naar de opgegeven bestemming verzonden.
KOPPELINGEN Documenten rechtstreeks scannen naar een USB-geheugen Documenten rechtstreeks vanaf het apparaat verzenden als e-mailberichten (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Documenten rechtstreeks opslaan in een gedeelde map (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) 㻟㻜㻟㻌㻛㻌㻢㻤㻠
0CSC-06K Dichtheid aanpassen U kunt de dichtheid van de scan aanpassen als de tekst of afbeeldingen in een document te licht of te donker zijn. geef bestemmingen op of sluit een USB-geheugenapparaat aan pas de dichtheid aan <–> Hiermee verlaagt u de dichtheid. <+> Hiermee verhoogt u de dichtheid.
0CSC-06L De afdrukstand van het document opgeven U kunt de afdrukstand instellen op Staand of Liggend. geef bestemmingen op of sluit een USB-geheugenapparaat aan afdrukstand selecteer de Selecteer deze optie voor documenten met de afdrukstand Staand. Selecteer deze optie voor documenten met de afdrukstand Liggend.
0CSC-06R Documenttype selecteren U kunt de beeldkwaliteit voor de scan selecteren op basis van het documenttype, zoals documenten met alleen tekst, documenten met grafieken en tabellen of documenten met tijdschriftfoto's. geef bestemmingen op of sluit een USB-geheugenapparaat aan document selecteer het type Selecteer deze optie als u documenten gaat scannen die alleen tekst bevatten. Selecteer deze optie als u documenten gaat scannen die tekst en foto's bevatten.
0CSC-06S Dubbelzijdige documenten scannen (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Het apparaat kan automatisch de voor- en achterzijde scannen van documenten in de invoer. BELANGRIJK Het apparaat kan de beide zijden van documenten niet automatisch scannen wanneer u de documenten op de glasplaat legt. geef bestemmingen op of sluit een USB-geheugenapparaat aan <2-Z.
0CSC-06U Scherpte aanpassen U kunt de scherpte van de afbeelding aanpassen voordat u deze verzendt. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren. geef bestemmingen op of sluit een USB-geheugenapparaat aan pas de scherpte aan <–> Hiermee verlaagt u de scherpte, waardoor het beeld minder hard is.
0CSC-06W De juiste balans tussen bestandsgrootte en beeldkwaliteit kiezen De gescande documenten worden geconverteerd naar de opgegeven bestandsindelingen. Op dat moment kunt u het compressieniveau van het bestand opgeven. Als u selecteert, wordt een hogere compressieverhouding gebruikt dan normaal en is het resultaat een kleiner bestand met een lagere beeldkwaliteit.
0CSC-06X Gammawaarden instellen De gescande documenten worden geconverteerd naar de opgegeven bestandsindelingen. Op dat moment kunt u de gammawaarden opgeven die op de documenten moeten worden toegepast. U kunt de gammawaarde opgeven van de monitor die wordt gebruikt om de geconverteerde bestanden te bekijken, zodat de bestanden worden weergegeven met de helderheid van de originele documenten. OPMERKING Raadpleeg de handleiding van de monitor om de gammawaarde te bepalen.
0CSC-06Y Bestemmingen opgeven (E-mail/Gedeelde map) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt bestemmingen opgeven door deze in het adresboek te selecteren en door de numerieke toetsen te gebruiken. Als u het adresboek wilt gebruiken, moet u eerst bestemmingen opslaan in het adresboek. U kunt ook eerder gebruikte bestemmingen opgeven. Als in uw kantooromgeving een LDAP-server is geïnstalleerd, kunt u ook bestemmingen op de server opgeven.
0CSC-070 Opgeven met numerieke toetsen (e-mail) Gebruik de numerieke toetsen op het bedieningspaneel om bestemmingen op te geven. BELANGRIJK Als is ingesteld op , kunt u geen bestemmingen invoeren met de numerieke toetsen. Beperkingen instellen voor beschikbare bestemmingen OPMERKING U kunt de numerieke toetsen alleen gebruiken bij het opgeven van de eerste bestemming. Als u extra bestemmingen wilt opgeven, gebruikt u het adresboek of een LDAP-server.
0CSC-071 Opgeven vanuit het adresboek U kunt een bestemming opgeven via het adresboek door een keuze te maken in de lijst met opgeslagen bestemmingen of door op naam van ontvanger te zoeken naar bestemmingen. U kunt ook rechtstreeks een bestemming opgeven door een code van drie cijfers (code voor verkort kiezen) in te voeren die is toegewezen aan een bestemming.
tekens op het geselecteerde tabblad. > < Druk hierop om bestemmingen voor faxen weer te geven. Zie wilt opgeven via dit tabblad. Opgeven vanuit het adresboek (fax) als u bestemmingen > < Druk hierop om bestemmingen voor e-mails weer te geven. > < Druk hierop om bestemmingen voor gedeelde mappen weer te geven. > < Druk hierop om bestemmingen weer te geven die zijn opgeslagen met de functie Groepskiezen. Deze functie is niet beschikbaar als u documenten naar gedeelde mappen gaat scannen.
Bestemmingen rechtstreeks selecteren door codes voor verkort kiezen in te voeren 1 2 Druk op . Druk op (Kiescode). U kunt ook 3 / gebruiken om te selecteren op het scherm en vervolgens op drukken. Gebruik de numerieke toetsen om de code van drie cijfers (001 - 181) in te voeren. Als u een verkeerd teken invoert, drukt u op . (Druk eenmaal op de toets om het laatst ingevoerde teken te wissen. Houd de toets langer ingedrukt om alle ingevoerde tekens te wissen.
OPMERKING Als u bestemmingen snel en eenvoudig wilt verwijderen zonder de lijst met bestemmingen weer te geven Voordat u selecteert in stap 1, kunt u op / drukken om te schakelen tussen de bestemmingen die u hebt opgegeven. Geef op deze manier de bestemming weer die u wilt verwijderen en druk .
0CSC-072 Eerder gebruikte bestemmingen opgeven U kunt een bestemming selecteren uit de drie laatst gebruikte bestemmingen. Als u een eerder gebruikte bestemming opgeeft, worden ook de laatst gebruikte scaninstellingen, zoals de dichtheid, voor die bestemming geselecteerd. BELANGRIJK Als is ingesteld op , kunt u deze functie niet gebruiken.
0CSC-073 Bestemmingen op een LDAP-server opgeven (e-mail) Als in uw kantooromgeving een LDAP-server is geïnstalleerd, kunt u ook bestemmingen opgeven die op die server zijn vastgelegd. Hiervoor opent u vanaf het apparaat het adresboek op een LDAP-server en zoekt u de bestemming. OPMERKING U moet de instellingen voor verbinding met een LDAP-server vooraf opgeven. LDAP-servers registreren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) 1 2 Druk op .
7 Geef de zoekmethode op en druk op . Er worden alleen bestemmingen gevonden en weergegeven die voldoen aan alle zoekcriteria uit stappen 4 en 5. De zoekresultaten bestaan uit alle bestemmingen die voldoen aan één of meer van de opgegeven zoekcriteria uit stappen 4 en 5. 8 Druk op . U ziet de bestemmingen die voldoen aan de opgegeven zoekcriteria.
3 Druk op , selecteer en druk op . OPMERKING Als u bestemmingen snel en eenvoudig wilt verwijderen zonder de lijst met bestemmingen weer te geven Voordat u selecteert in stap 1, kunt u op / drukken om te schakelen tussen de bestemmingen die u hebt opgegeven. Geef op deze manier de bestemming weer die u wilt verwijderen en druk .
0CSC-068 De standaardinstellingen wijzigen De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of op drukt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft op te geven als u gaat scannen.
Instellingen Selecteer het item dat u wilt instellen en wijzig de standaardwaarde.
0CSC-075 Het logboek voor verzonden documenten controleren (E-mail/Gedeelde map) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) De logboeken voor verzonden e-mails of documenten die naar gedeelde mappen zijn gescand, kunt u controleren in een lijst. BELANGRIJK Als is ingesteld op , kunt u de logboeken voor verzonden documenten niet raadplegen. Weergave opdrachtlog 1 2 3 Druk op Druk op (Statusmonitor).
0CSC-07K Netwerk De machine is ontworpen voor flexibel gebruik binnen verschillende omgevingen. Dit betekent dat de machine naast verschillende standaardfuncties voor netwerkgebruik, ook geavanceerde technologieën ondersteunt. Gelukkig hoeft u geen netwerkexpert te zijn om deze functies te kunnen gebruiken, bij het ontwerpen van de machine is immers ook rekening is gehouden met het gebruiksgemak.
0CSC-07L Verbinding maken met een netwerk Als u het apparaat verbindt met een bekabeld of draadloos lokaal netwerk (LAN), moet u een IP-adres instellen dat uniek is voor het geselecteerde netwerk. Kies voor "bekabeld" of "draadloos", afhankelijk van de communicatie-omgeving en netwerkapparatuur ( Verbinding met een computer). Als u specifieke vragen hebt over de instellingen van het IP-adres van het apparaat, neemt u contact op met uw internetprovider of de netwerkbeheerder.
Stel zo nodig het IP-adres in. Deze stap is vereist wanneer u een specifiek IP-adres wilt toewijzen aan het apparaat of niet de standaardinstelling DHCP wilt gebruiken voor het dynamisch toewijzen van IP-adressen.
0CSC-07R Bekabeld LAN of Draadloos LAN selecteren (Alleen de MF8580Cdw / MF8280Cw) Als u een beslissing hebt genomen ten aanzien van een bekabelde of draadloze verbinding tussen het apparaat en de computer ( Verbinding met een computer), selecteert u Bekabeld LAN of Draadloos LAN op het bedieningspaneel.
0CSC-07S Verbinding maken met een bekabeld LAN Sluit de machine via een router aan op een computer. Sluit de machine met een LAN-kabel aan op de router. 1 Sluit een LAN-kabel aan. Sluit de machine met een LAN-kabel aan op een router. U hoort een klik als de connector van de kabel op zijn plaats klikt. 2 Wacht ongeveer twee minuten. Dit is de tijd die nodig is om het IP-adres automatisch in te stellen. OPMERKING: U kunt het IP-adres ook handmatig instellen.
0CSC-07U Verbinding maken met een draadloos LAN (Alleen de MF8580Cdw / MF8280Cw) Als u een draadloze router (of een toegangspunt) gebruikt, loopt de verbinding tussen de machine en een computer via radiogolven. Als uw draadloze router ondersteuning biedt voor Wi-Fi Protected Setup (WPS), kunt u het netwerk automatisch en dus eenvoudig configureren.
OPMERKING Als de draadloze router is ingesteld voor WEP-verificatie, kunt u mogelijk geen verbinding instellen via WPS. Verbinding handmatig instellen Als u handmatig een draadloze verbinding gaat instellen, kunt u een draadloze router selecteren of zelf de benodigde gegevens invoeren. Ongeacht de methode, moet u beschikken over de benodigde gegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren).
0CSC-07W De verbinding instellen met behulp van de WPS Drukknop-modus Als uw draadloze router ondersteuning biedt voor de drukknop-modus van WPS, kunt u eenvoudig een verbinding configureren via de WPS-knop. BELANGRIJK De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op .
Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden. Wacht ongeveer 2 minuten totdat de instellingen voor het IP-adres van de machine zijn voltooid. BELANGRIJK: Signaalsterkte Als voor een verbinding meerdere draadloze routers beschikbaar zijn, maakt de machine verbinding met het apparaat met het krachtigste signaal. De signaalsterkte wordt gemeten met behulp van RSSI (Received Signal Strength Indication).
0CSC-07X De verbinding instellen met behulp van de WPS PIN-modus Als uw draadloze router ondersteuning biedt voor de WPS PIN-modus, genereert u een pincode met de machine en registreert u deze code op het netwerkapparaat. BELANGRIJK De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. Vanaf een computer 1 Ga in een browser naar de instellingen van de draadloze router en geef het scherm weer voor het invoeren van een WPS PIN-code.
9 Controleer of het Wi-Fi-lampje brandt op het bedieningspaneel. Het Wi-Fi-lampje brandt knippert als er een draadloze router is gedetecteerd. Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden. Wacht ongeveer 2 minuten totdat de instellingen voor het IP-adres van de machine zijn voltooid.
0CSC-07Y De verbinding instellen door een draadloze router te selecteren U kunt de beschikbare draadloze routers (of toegangspunten) zoeken en een keuze maken uit de display van het apparaat. Geef voor de netwerksleutel een WEP-sleutel op of TKIP. Controleer en noteer de benodigde configuratiegegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren) voordat u een draadloze router selecteert.
Als uw draadloze router niet wordt gevonden Controleer of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk. installatie/instellingen 8 Problemen met Voer de netwerksleutel in die u hebt opgeschreven. Voer de netwerksleutel in met de numerieke toetsen en druk op . Tekst invoeren WPA-PSK of WPA2-PSK WEP 9 Selecteer en druk op .
Als het IP-adres van het apparaat is gewijzigd In een DHCP-omgeving kan het IP-adres van het apparaat automatisch worden gewijzigd. Als dit gebeurt, wordt de verbinding gehandhaafd op voorwaarde dat het apparaat en de computer nog steeds deel uitmaken van hetzelfde subnet.
0CSC-080 De verbinding instellen door gedetailleerde instellingen op te geven Als u gedetailleerde beveiligingsinstellingen wilt opgeven of geen draadloze verbinding tot stand kunt brengen via de andere procedures, kunt u alle benodigde gegevens voor de draadloze verbinding ook zelf invoeren. Controleer en noteer de benodigde gegevens voordat u de instellingen gaat opgeven.
3 4 Selecteer de WEP-sleutel (1 tot 4) die u wilt wijzigen en druk op . U kunt maximaal vier WEP-sleutels opslaan. 5 Voer de netwerksleutel in die u hebt opgeschreven. Voer de netwerksleutel in met de numerieke toetsen en druk op . 6 Selecteer en druk op 7 Selecteer de WEP-sleutel die u hebt bewerkt en druk op Tekst invoeren . . WPA-PSK of WPA2-PSK gebruiken 1 Selecteer en druk op 2 Selecteer de coderingsmethode en druk op . .
OPMERKING: Als er een foutbericht verschijnt tijdens het instellen Druk op 9 , controleer of de opgegeven instellingen juist zijn en ga terug naar stap 5. Controleer of het Wi-Fi-lampje brandt op het bedieningspaneel. Het Wi-Fi-lampje brandt knippert als er een draadloze router is gedetecteerd. Als de configuratie is voltooid, wordt het onderstaande scherm weergegeven en gaat ongeveer 2 seconden later het Wi-Fi-lampje branden.
0CSC-081 De SSID en de netwerksleutel controleren Wanneer u handmatig een draadloze verbinding gaat instellen, moet u de SSID en netwerksleutel van de draadloze router opgeven. De SSID en de netwerksleutel worden mogelijk aangegeven op de router. Controleer het apparaat en noteer de benodigde gegevens voordat u de verbinding gaat instellen. Meer informatie over uw netwerkapparatuur kunt u lezen in de handleidingen of opvragen bij de fabrikant.
4 Lees de licentieovereenkomst en klik op [Yes] (Ja) om akkoord te gaan. 5 Controleer de gegevens die worden weergegeven voor de draadloze router. Noteer de benodigde gegevens. Als u niet weet welke gegevens u nodig hebt, noteert u alle weergegeven gegevens. OPMERKING: Als er geen draadloze routers worden gevonden Klik op [Refresh] (Vernieuwen). Als er niets gebeurt, controleert u of de instellingen goed zijn geconfigureerd op de computer en op de draadloze router.
0CSC-082 IP-adressen instellen Als u de machine wilt gebruiken in een netwerk, hebt u een uniek IP-adres nodig. Er zijn twee versies van IP-adressen beschikbaar: IPv4 en IPv6. Configureer het IP-adres afhankelijk van de netwerkomgeving. Als u IPv6-adressen wilt gebruiken, moet u de IPv4adresinstellingen op de juiste manier configureren.
0CSC-083 IPv4-adres instellen Het IPv4-adres van het apparaat kan automatisch worden toegewezen via een speciaal protocol zoals DHCP of het kan handmatig worden ingevoerd. Als u het apparaat verbindt met een bekabeld LAN, zorg er dan voor dat de stekker van de LAN-kabel stevig in de aansluiting zit ( Verbinding maken met een bekabeld LAN). U kunt de netwerkverbinding indien nodig testen. IPv4-adres instellen De netwerkverbinding testen IPv4-adres instellen 1 2 Druk op .
4 Druk op . OPMERKING: IP-adressen die worden toegewezen via DHCP/BOOTP/RARP vervangen het adres dat is verkregen via Auto IP. Handmatig een IP-adres invoeren 1 Controleer of is ingesteld op . Als wordt weergegeven, selecteert u in op . en stelt u zowel als 2 Selecteer en druk op 3 Geef het IP-adres, het subnetmasker en het gateway-adres (of de standaardgateway) op.
KOPPELINGEN IPv6-adres instellen Netwerkinstellingen weergeven WINS configureren 㻟㻠㻢㻌㻛㻌㻢㻤㻠
0CSC-084 IPv6-adres instellen De IPv6-adressen van het apparaat kunnen worden geconfigureerd via de UI op afstand. Controleer voordat u IPv6-adressen gaat instellen de instellingen van het IPv4-adres ( IPv4-instellingen weergeven). U moet de juiste IPv4-instellingen opgeven om te kunnen werken met IPv6-adressen. De scanfunctie die gebruikmaakt van het scannerstuurprogramma of MF Toolbox is niet beschikbaar in een IPv6-omgeving.
5 Schakel het selectievakje [Gebruik IPv6] in en configureer de vereiste instellingen. [Gebruik IPv6] Schakel dit selectievakje in om IPv6 te activeren op het apparaat. Als u IPv6 niet gebruikt, schakelt u het selectievakje uit. [Stateless adres] Schakel dit selectievakje in als u een stateless adres gebruikt. Als u geen stateless adres gebruikt, schakelt u het selectievakje uit.
OPMERKING Controleren of de instellingen juist zijn Controleer of het scherm UI op afstand kan worden weergegeven op uw computer door het IPv6-adres van het apparaat te De UI op afstand starten gebruiken. Het bedieningspaneel gebruiken De IPv6-instellingen zijn ook bereikbaar via .
0CSC-085 Netwerkinstellingen weergeven IPv4-instellingen weergeven IPv6-instellingen weergeven Het MAC-adres weergeven Instellingen en informatie weergeven voor het draadloze LAN (Alleen de MF8580Cdw / MF8280Cw) OPMERKING Het IP-adres is niet goed geconfigureerd als dit wordt weergegeven als "0.0.0.0". Als u het apparaat aansluit op een switching hub of bridge, kan er sprake zijn van een verbindingsfout, zelfs wanneer het IPadres goed is geconfigureerd.
Instellingen en informatie weergeven voor het draadloze LAN (Alleen de MF8580Cdw / MF8280Cw) 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als het aanmeldingsscherm verschijnt, gebruikt u de numerieke toetsen om de juiste combinatie van ID en pincode in te voeren. . Aanmelden bij de machine Druk vervolgens op 3 Selecteer en druk op .
0CSC-086 De machine configureren voor afdrukken of faxen vanaf een computer Als u het apparaat gebruikt als een netwerkprinter of om faxen te versturen vanaf een computer, kunt u de protocollen en poorten configureren die u wilt gebruiken voor afdrukken en een printserver instellen voor het apparaat.
0CSC-087 Afdrukprotocollen en WSD-functies configureren Configureer de protocollen die worden gebruikt voor het afdrukken van documenten vanaf een netwerkcomputer. De ondersteunde protocollen zijn LPD, RAW en WSD (Web Services on Devices). OPMERKING Om de poortnummers van protocollen te wijzigen, raadpleegt u 1 2 Poortnummers wijzigen. Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/Registratie].
[Gebruik LPD-afdrukken] Schakel dit selectievakje in om af te drukken via LPD. Als u niet afdrukt via LPD, schakelt u het selectievakje uit. [Gebruik RAW-afdrukken] Schakel dit selectievakje in om af te drukken via RAW. Als u RAW niet gebruikt om af te drukken, schakelt u het selectievakje uit. 3 Klik op [OK]. WSD configureren 1 Klik op [Bewerken...] in [WSD-instellingen]. 2 Configureer de instellingen. [Gebruik WSD-afdrukken] Schakel dit selectievakje in om af te drukken via WSD.
3 5 Klik op [OK]. Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. OPMERKING Het bedieningspaneel gebruiken De instellingen voor LPD, RAW en WSD zijn ook bereikbaar via . Instellingen LPD-afdrukken Instellingen RAW-afdrukken WSD-instellingen WSD-netwerkapparaten instellen op Windows Vista/7/8 De WSD-printer en -scanner kunnen worden toegevoegd vanuit de printermap.
0CSC-088 Printerpoorten configureren Er kunnen afdrukfouten optreden wanneer het IP-adres van de machine is gewijzigd of wanneer er een printer is toegevoegd via de printermap van Windows. Deze fouten zijn meestal het gevolg van onjuiste printerpoortinstellingen. Zo kan er een onjuist poortnummer of type poort zijn opgegeven. In dergelijke situaties mislukt het afdrukken omdat de documentgegevens niet aankomen op de machine.
3 Klik op [Auto Detect] (Autom. detectie), selecteer het apparaat als dit is gevonden en klik op [Next] (Volgende). OPMERKING: Als het apparaat niet wordt gevonden Klik op [Refresh] (Vernieuwen). Als het probleem blijft optreden, klikt u op [IP address] (IP-adres) of [MAC Netwerkinstellingen weergeven address] (MAC-adres), voert u het IP-adres of MAC-adres van het apparaat in en klikt u op [Next] (Volgende). 4 Klik op [Add] (Toevoegen) 5 Klik op [Close] (Sluiten). [Finish] (Voltooien).
4 Klik op [Close] (Sluiten).
0CSC-089 Een printserver instellen Het installeren van een printserver (afdrukserver) betekent dat u de computer kunt ontlasten die u gebruikt om af te drukken. Een ander voordeel is dat de computers de MF-stuurprogramma's via het netwerk kunnen installeren en dat u dit dus niet per computer hoeft te doen vanaf de cd-rom. Als u een computer in het netwerk wilt instellen als een printserver, moet u de instellingen voor het delen van de printer configureren.
OPMERKING Als [Change sharing options] (Opties voor delen wijzigen) wordt weergegeven Klik op [Change sharing options] (Opties voor delen wijzigen). Als het dialoogvenster [User Account Control] (Gebruikersaccountbeheer) verschijnt, klikt u op [Yes] (Ja) of [Continue] (Doorgaan). 4 Installeer eventueel aanvullende stuurprogramma's. Deze bewerking is noodzakelijk als u via de printserver MF-stuurprogramma's wilt installeren op computers met een andere bitarchitectuur.
MF-stuurprogramma's via de printserver installeren op een computer 1 2 3 Zoek de gedeelde printer op de printserver. Printers weergeven die worden gedeeld op de printserver Dubbelklik op de gedeelde printer. Volg de instructies op het scherm om de stuurprogramma's te installeren.
0CSC-08A De machine configureren voor het scannen naar e-mail of naar gedeelde mappen (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Als u gescande documenten rechtstreeks vanaf het apparaat wilt versturen per e-mail of wilt opslaan in een gedeelde map, moet u dit opgeven in de configuratie van het apparaat. Hiervoor kunt u de Instel-tool Zendfunctie gebruiken, een programma dat standaard bij het apparaat wordt geleverd. Bepaal afhankelijk van de netwerkomgeving de juiste configuratie.
0CSC-08C De machine configureren voor het scannen naar e-mail Controleer de onderstaande punten voordat u het apparaat gaat configureren voor het scannen naar e-mail. Zorg ervoor dat het apparaat en de computer op de juiste manier met elkaar zijn verbonden.
0CSC-08E Basisinstellingen voor e-mail configureren De Instel-tool Zendfunctie is een hulpmiddel voor het configureren van de e-mailinstellingen. Met dit programma kunt u ook emailadressen opslaan in het adresboek. OPMERKING U kunt meer gedetailleerde instellingen opgeven door de UI op afstand te gebruiken in plaats van de Instel-tool Zendfunctie ( Geavanceerde instellingen voor e-mail configureren).
OPMERKING: Als het onderstaande scherm verschijnt Klik op [Ja]. 5 Selecteer het apparaat in [Apparatenlijst] en klik op [Volgende]. OPMERKING: Als het apparaat niet wordt weergegeven in [Apparatenlijst] Klik op [Opnieuw zoeken]. Als het probleem blijft optreden, klikt u op [Zoeken op IP-adres], typt u het IP-adres van het apparaat en klikt u op [OK]. 6 2 Controleer de instellingen op en bevestig deze door op [OK] te klikken. Klik op [Starten].
Als u wordt gevraagd een pincode voor het adresboek in te voeren, typt u de pincode voor het adresboek en klikt u op [OK]. Een pincode instellen voor het adresboek 4 Geef de vereiste instellingen op. [Registratie] [Nummer Favorieten] Met de Instel-tool Zendfunctie kunt u een e-mailadres opslaan in het onderdeel van het adresboek. Selecteer een nummer in de vervolgkeuzelijst. [Naam voor Nummer Favorieten] Voer een naam in voor de bestemming die u wilt opslaan.
6 7 Controleer de instellingen op en bevestig deze door op [Registreren] te klikken. Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. BELANGRIJK Er kunnen extra instellingen nodig zijn, afhankelijk van het netwerk dat u gebruikt. Neem voor meer informatie contact op met uw internetprovider of de netwerkbeheerder.
0CSC-08F Geavanceerde instellingen voor e-mail configureren Gebruik de UI op afstand om gedetailleerde e-mailinstellingen te configureren, zoals verificatie via POP voor SMTP en codering met SSL. Neem voor meer informatie over de vereiste instellingen contact op met uw internetprovider of netwerkbeheerder. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/Registratie]. 3 Klik op [Netwerkinstellingen] 4 Klik op [Bewerken...].
[SMTP-serveradres] Gebruik maximaal 48 tekens voor de naam/het adres van de SMTP-server. [E-mail-adres] Gebruik maximaal 120 tekens voor het e-mailadres dat u wilt gebruiken voor het apparaat. POP voor SMTP instellen en communicatie met de POP-server coderen De verificatiemethode POP voor SMTP zorgt ervoor dat onbevoegde gebruikers geen toegang hebben tot e-mail door gebruikersverificatie uit te voeren op de POP-server.
[Gebruik SMTP-authentificatie (SMTP AUTH)] Als u verificatie wilt inschakelen op de SMTP-server, schakelt u het selectievakje in en typt u maximaal 64 tekens in het vak [Gebruikersnaam]. [Instellen/Wijzigen Wachtwoord] Als u het wachtwoord wilt opgeven of wijzigen, typt u maximaal 32 tekens in het vak [Wachtwoord]. [Gebruik SSL] Schakel het selectievakje in om alle communicatie met de SMTP-server te coderen met behulp van SSL.
0CSC-08H De machine configureren voor het scannen naar gedeelde mappen Controleer de onderstaande punten voordat u het apparaat gaat configureren voor het scannen naar gedeelde mappen. Zorg ervoor dat het apparaat en de computer op de juiste manier met elkaar zijn verbonden.
0CSC-08J Een gedeelde map instellen als een opslaglocatie Het scannen naar gedeelde mappen wordt ook wel "scannen naar SMB" genoemd omdat de functie werkt met SMB (Server Message Block), een technologie van Windows. SMB is een protocol voor het delen van bronnen, zoals bestanden en printers, met meerdere apparaten in een netwerk ( SMB configureren).
OPMERKING: Als het onderstaande scherm verschijnt Klik op [Ja]. 5 Selecteer het apparaat in [Apparatenlijst] en klik op [Volgende]. OPMERKING: Als het apparaat niet wordt weergegeven in [Apparatenlijst] Klik op [Opnieuw zoeken]. Als het probleem blijft optreden, klikt u op [Zoeken op IP-adres], typt u het IP-adres van het apparaat en klikt u op [OK]. 6 2 Controleer de instellingen op en bevestig deze door op [OK] te klikken. Klik op [Starten].
Als u wordt gevraagd een pincode voor het adresboek in te voeren, typt u de pincode voor het adresboek en klikt u op [OK]. Een pincode instellen voor het adresboek 4 Geef de vereiste instellingen op. [Registratie] [Nummer Favorieten] Met de Instel-tool Zendfunctie kunt u een gedeelde map voor het opslaan van gescande documenten toevoegen aan het onderdeel van het adresboek. Selecteer een nummer in de vervolgkeuzelijst.
[Status van instellingen voor gedeelde map] [Toegangsbeperking naar gedeelde map] Selecteer het keuzerondje [Niet ingesteld] of [Ingesteld], afhankelijk van de toegangsinstellingen die zijn ingesteld voor de gedeelde map. Als u [Ingesteld] selecteert, typt u de gebruikersnaam in het vak [Naam geregistreerde gebruiker] en het wachtwoord in het vak [Wachtwoord voor toegang]. 5 6 7 Klik op [Volgende]. Controleer de instellingen op en bevestig deze door op [Registreren] te klikken.
0CSC-08K De machine configureren voor uw netwerkomgeving De configuratie van een netwerk varieert naargelang de functie van het netwerk. Het apparaat is ontworpen voor compatibiliteit met zo veel mogelijk netwerkconfiguraties en ondersteunt om die reden verschillende technologieën. Overleg met de netwerkbeheerder en kies voor een configuratie die aansluit bij uw netwerkomgeving.
0CSC-08L Ethernet-instellingen configureren Ethernet is een standaard voor het uitwisselen van gegevens in een lokaal netwerk (LAN). U kunt de communicatiemodus (Half duplex/Full duplex) en het type Ethernet (10BASE-T/100BASE-TX) instellen. Over het algemeen is het zo dat u het apparaat kunt gebruiken zonder dat u de standaardinstellingen hoeft te wijzigen ( Instellingen Ethernet stuurprogramma), maar u kunt de instellingen wijzigen om deze beter af te stemmen op uw netwerkomgeving. 1 2 Druk op .
KOPPELINGEN De maximale verzendeenheid wijzigen Een wachttijd instellen voor verbinding met een netwerk 㻟㻣㻤㻌㻛㻌㻢㻤㻠
0CSC-08R De maximale verzendeenheid wijzigen In de meeste Ethernet-netwerken is 1500 bytes de maximale grootte van een gegevenspakket dat kan worden verzonden. Een pakket is het blok met gegevens waarin de oorspronkelijke gegevens worden opgedeeld voordat ze worden verzonden. De maximale verzendeenheid (MTU) kan per netwerk verschillen. Wijzig de instellingen van het apparaat indien nodig. Neem voor meer informatie contact op met de netwerkbeheerder. 1 2 Druk op .
0CSC-08S Een wachttijd instellen voor verbinding met een netwerk Als in een netwerk redundante connectiviteit wordt aangeboden door de aanwezigheid van verschillende switching hubs of bridges, moet er een mechanisme zijn om te voorkomen dat pakketten in een oneindige lus terechtkomen. Een efficiënte oplossing is dus om voor elke switch-poort een bepaalde rol te definiëren.
0CSC-08U DNS configureren DNS (Domain Name System) is een service voor naamomzetting waarmee de naam van een host (of domein) wordt gekoppeld aan een IP-adres. Configureer de benodigde instellingen voor DNS, mDNS of DHCP. De procedures voor het configureren van DNS zijn verschillend voor IPv4 en IPv6. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/Registratie]. 3 Klik op [Netwerkinstellingen] 4 Configureer de DNS-instellingen. [TCP-/IP-instellingen].
[DNS-instellingen] [Primaire DNS-serveradres] Voer het IP-adres van een DNS-server in. [Secundaire DNS-serveradres] Voer het IP-adres van een secundaire DNS-server in, indien beschikbaar. [Hostnaam] Typ hier maximaal 47 alfanumerieke tekens voor de hostnaam van het apparaat dat u wilt registreren op de DNSserver. [Domeinnaam] Typ hier maximaal 47 alfanumerieke tekens voor de naam van het domein waarvan het apparaat deel uitmaakt, zoals "voorbeeld.com".
2 Configureer de DNS-instellingen van IPv6. Het selectievakje [Gebruik IPv6] moet zijn ingeschakeld om de instellingen te configureren. IPv6-adres instellen [DNS-instellingen] [Primaire DNS-serveradres] Voer het IP-adres van een DNS-server in. U kunt geen adressen invoeren die beginnen met "ff" (multicast-adressen). [Secundaire DNS-serveradres] Voer het IP-adres van een secundaire DNS-server in, indien beschikbaar. U kunt geen adressen invoeren die beginnen met "ff" (multicast-adressen).
5 Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. OPMERKING De DNS-instellingen zijn ook bereikbaar via .
0CSC-08W SMB configureren SMB (Server Message Block) is een protocol voor het delen van bronnen, zoals bestanden en printers, met meerdere apparaten in een netwerk. Het apparaat maakt gebruik van SMB om gescande documenten op te slaan in een gedeelde map. Afhankelijk van het netwerk, moet u de NetBIOS-naam en een werkgroepnaam instellen.
5 Geef de vereiste instellingen op en klik op [OK]. [NetBIOS-naam] Gebruik maximaal 15 alfanumerieke tekens voor de NetBIOS-naam van het apparaat. [Naam werkgroep] Gebruik maximaal 15 alfanumerieke tekens voor de naam van de werkgroep waarvan het apparaat deel uitmaakt. BELANGRIJK: NetBIOS-namen of werkgroepnamen die beginnen met een sterretje (*) kunnen niet worden geregistreerd op een WINS-server. 6 Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan.
0CSC-08X WINS configureren WINS (Windows Internet Name Service) is een service voor naamomzetting waarmee een NetBIOS-naam (de naam van een computer of printer in een SMB-netwerk) wordt gekoppeld aan een IP-adres. U moet de WINS-server opgeven om WINS in te schakelen. BELANGRIJK Als u instellingen voor de WINS-server wilt opgeven, moeten de NetBIOS-naam en de werkgroepnaam zijn ingesteld. configureren Deze functie is niet beschikbaar in een IPv6-netwerk.
[WINS-resolutie] Schakel dit selectievakje in als u WINS wilt gebruiken voor naamomzetting. Als u WINS niet gebruikt, schakelt u het selectievakje uit. [WINS-serveradres] Voer het IP-adres van de WINS-server in. BELANGRIJK: Als het IP-adres van de WINS-server wordt verkregen van een DHCP-server, heeft het verkregen IP-adres prioriteit boven het IPadres dat is ingevoerd in het vak [WINS-serveradres].
0CSC-08Y LDAP-servers registreren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Als er een LDAP-server is geïmplementeerd in het netwerk, kunt u faxnummers en e-mailadressen zoeken op de server. Deze nummers en adressen kunt u vervolgens als bestemmingen opslaan in het adresboek. U kunt maximaal vijf LDAP-servers registreren op het apparaat. Dit doet u via de UI op afstand.
OPMERKING Gegevens van een geregistreerde server wijzigen Klik op een tekstkoppeling onder [Servernaam] voor het bewerkingsscherm. Geregistreerde servers verwijderen Klik op [Verwijderen] naast de naam van de server die u wilt verwijderen 5 klik op [OK]. Geef de vereiste instellingen op. [Servernaam] Gebruik maximaal 24 alfanumerieke tekens voor de naam van de LDAP-server.
Selecteer [Niet gebruiken], [Gebruik] of [Gebruik (Beveiligingsauthentificatie)], afhankelijk van het type verificatie dat wordt gebruikt door de LDAP-server. Als [Gebruik] of [Gebruik (Beveiligingsauthentificatie)] is geselecteerd, moet u een gebruikersnaam en wachtwoord opgeven. [Niet gebruiken] Met deze optie wordt de machine niet geverifieerd met behulp van de aanmeldingsgegevens. [Gebruik] Met deze optie wordt de machine geverifieerd met behulp van de aanmeldingsgegevens.
0CSC-090 SNTP configureren Met SNTP (Simple Network Time Protocol) kunt u de systeemklok synchroniseren met de tijdserver in het netwerk. Het protocol wordt meestal gebruikt voor het synchroniseren van het apparaat en een server, bijvoorbeeld wanneer het apparaat toegang nodig heeft tot een LDAP-server waarvoor verificatie is ingeschakeld. De tijd wordt aangepast op basis van UTC (Coordinated Universal Time).
5 [Gebruik SNTP] Schakel het selectievakje in als u SNTP wilt gebruiken voor synchronisatie. Als u SNTP niet wilt gebruiken, schakelt u het selectievakje uit. [NTP-servernaam] Voer het IP-adres van de NTP- of de SNTP-server in. Als DNS beschikbaar is in het netwerk, kunt u een hostnaam (of FQDN) van maximaal 255 alfanumerieke tekens invoeren. (Voorbeeld: ntp.example.com). [Pollinginterval] Geef het interval op tussen opeenvolgende synchronisaties. U kunt een interval opgeven van 1 tot 48 uur.
0CSC-091 De machine bewaken en bedienen met SNMP SNMP (Simple Network Management Protocol) is een protocol voor het bewaken en aansturen van communicatieapparaten in een netwerk dat werkt met MIB (Management Information Base). De machine ondersteunt SNMPv1 en SNMPv3 met extra beveiliging. U kunt de status van de machine controleren vanaf een computer wanneer u documenten afdrukt of de UI op afstand gebruikt. U kunt SNMPv1 of SNMPv3 inschakelen, of beide versies tegelijk.
4 Klik op [Bewerken...]. 5 Geef instellingen voor SNMPv1 op. Als u de SNMPv1-instellingen niet hoeft te wijzigen, gaat u verder met de volgende stap. [Gebruik SNMPv1] Schakel dit selectievakje in om SNMPv1 in te schakelen. De overige instellingen voor SNMPv1 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruik Community-naam 1]/[Gebruik Community-naam 2] Schakel het selectievakje in om een Community-naam op te geven.
[Read Only] Hiermee kunnen de waarden van MIB-objecten alleen worden weergegeven. [Gebruik speciale community] De speciale community is een vooraf gedefinieerde community die uitsluitend is bedoeld voor beheerders die met Canon-software werken, zoals imageWARE Enterprise Management Console. Schakel het selectievakje in als u de speciale community wilt gebruiken. Als u de speciale community niet wilt gebruiken, schakelt u het selectievakje uit.
1 Schakel het selectievakje [Gebruik SNMPv3] in. 2 Schakel het selectievakje [Gebruiker inschakelen] in en geef de instellingen voor [Gebruikersnaam], [MIB-toegangspermissie] en [Beveiligingsinstellingen] op. U kunt maximaal drie gebruikers registreren. 3 Geef instellingen voor verificatie en codering op. Doe dit alleen als [Authentificatie Aan/Encryptie Aan] of [Authentificatie Aan/Encryptie Uit] is geselecteerd bij [Beveiligingsinstellingen].
[Printerbeheerinformatie verkrijgen van host] Schakel het selectievakje in om via SNMP de gegevens voor printerbeheer van het apparaat te bewaken. Als u geen printerbeheerinformatie wilt bewaken, schakelt u het selectievakje uit. 8 9 Klik op [OK]. Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan.
0CSC-092 SLP-communicatie met imageWARE configureren U kunt allerlei gegevens van netwerkapparatuur verzamelen en beheren door software voor apparaatbeheer, zoals imageWARE Enterprise Management Console * , te integreren in het netwerk. Informatie zoals apparaatinstellingen, adresboeken en foutenlogboeken wordt opgehaald en gedistribueerd via de servercomputer.
2 Schakel het selectievakje [Reageren op Discovery] in en geef de benodigde instellingen op. [Reageren op Discovery] Schakel het selectievakje in als het apparaat moet reageren op pakketten voor Multicast Discovery van imageWARE en u bewaking door imageWARE wilt inschakelen. [Scope naam] Als u het apparaat wilt toevoegen aan een bepaald bereik, typt u hier maximaal 32 tekens voor de naam van het bereik. 3 Klik op [OK].
[Melden] Schakel het selectievakje in om imageWARE te informeren over de status van de stroomvoorziening van het apparaat. Als [Melden] is geselecteerd, wordt er niet onnodig gecommuniceerd tijdens de slaapstand en wordt het totale stroomverbruik teruggebracht. [Poortnummer] Kies deze optie om het poortnummer voor deze functie te wijzigen voor uw netwerkomgeving. [Aantal routers te passeren] Geef aan hoeveel routers de pakketten met meldingen kunnen passeren. Voer een waarde in van 0 tot 254.
0CSC-093 Beveiliging De realiteit is dat overal en altijd vertrouwelijke gegevens worden verwerkt door informatieapparaten, waaronder computers en printers. Het vervelende is dat elk van deze apparaten het doelwit kan worden van kwaadwillende derden. Aanvallers kunnen ongeoorloofde toegang krijgen tot uw apparaten of indirect voordeel halen uit slordigheid. Hoe het ook zij, u kunt geconfronteerd worden met onverwachte verliezen als uw vertrouwelijke gegevens worden onderschept.
0CSC-094 De machine beschermen tegen ongeoorloofde toegang Voorkom dat onbevoegden toegang krijgen tot de machine en deze kunnen gebruiken. U kunt verschillende beveiligingsmaatregelen treffen, zoals het beheren van toegangsmachtigingen, het instellen van firewalls en het aanpassen van poortnummers.
0CSC-095 Toegangsmachtigingen instellen Bescherm de machine tegen ongeoorloofde toegang door alleen gebruikers met toegangsmachtigingen toegang te bieden tot de machine. Toegangsmachtigingen worden afzonderlijk ingesteld per account, of "id". Er kan voor elke id een pincode worden ingesteld.
0CSC-096 De systeembeheerders-id instellen U kunt een zogenaamde ID systeembeheerder instellen. Dit is een id die uitsluitend is bedoeld voor beheerders. U kunt ook een pincode instellen voor de ID systeembeheerder. Als deze id is ingeschakeld, hebt u alleen toegang tot en als de ID systeembeheerder en bijbehorende pincode juist zijn ingevoerd.
Aanmelden bij het apparaat Als u of wilt gebruiken terwijl er een ID systeembeheerder is ingesteld, verschijnt het volgende aanmeldingsscherm: KOPPELINGEN Toegangsmachtigingen instellen Afdeling-ID beheer configureren 㻠㻜㻢㻌㻛㻌㻢㻤㻠
0CSC-097 Afdeling-ID beheer configureren U kunt de toegang tot het apparaat beheren door meerdere ID's te gebruiken voor meerdere gebruikers of groepen. Als een gebruiker probeert het apparaat te gebruiken terwijl Afdeling ID beheer is ingeschakeld, verschijnt er een aanmeldingsscherm en moet de gebruiker zijn of haar Afdeling ID met bijbehorende pincode invoeren om toegang te krijgen tot het apparaat.
2 Geef de vereiste instellingen op en klik op [OK]. [Afdeling-ID] Typ maximaal zeven cijfers voor de Afdeling ID. [Pincode instellen] Als u een pincode wilt instellen, schakelt u het selectievakje in en typt u een code van maximaal zeven cijfers in de vakken [PIN] en [Bevestigen]. [Beperk functies] Schakel het selectievakje in van de functies die u wilt uitschakelen voor de Afdeling ID.
2 Klik op [Instellingen/Registratie]. 3 Klik op [Afdeling-ID beheer] 4 Schakel het selectievakje [Afdeling-ID beheer] in en klik op [OK]. [Bewerken...]. [Afdeling-ID beheer] Schakel het selectievakje in om Afdeling ID beheer te activeren. Als u Afdeling ID beheer niet wilt gebruiken, schakelt u het selectievakje uit. OPMERKING: Voor informatie over de selectievakjes [Afdrukopdrachten met onbekende ID's toestaan]/[Scanopdrachten met onbekende ID's toestaan]/[Zwart-wit-kopieertaken toest.
Afdeling-ID beheer instellen voor afdrukken of faxen vanaf een computer Als u Afdeling-ID beheer wilt inschakelen voor afdrukken of faxen vanaf een computer, moet u instellingen opgeven met de stuurprogramma's die u al op de computer hebt geïnstalleerd. Geef een afdelings-id op en eventueel de bijbehorende pincode. BELANGRIJK Om de onderstaande procedure uit te voeren, moet u zich bij de computer aanmelden met een administratoraccount. 1 2 3 Open de printermap.
[Pincode instellen toestaan] Schakel dit selectievakje in om een pincode in te stellen. [Afdelings-id] Typ maximaal zeven cijfers voor de Afdeling ID. [Pincode] Typ maximaal zeven cijfers voor de pincode als deze moet worden ingevoerd voor de Afdeling ID. [Verifiëren] Klik hierop om te controleren of de juiste id en pincode zijn ingevoerd. Deze functie is niet beschikbaar als het apparaat en de computer via een USB- of een WSD-poort (Web Services on Devices) met elkaar zijn verbonden.
4 Schakel selectievakjes uit en klik op [OK]. [Afdrukopdrachten met onbekende ID's toestaan] Als u wilt afdrukken van een computer terwijl Afdeling ID beheer is ingeschakeld, moet u de juiste id en pincode invoeren in het printerstuurprogramma ( Afdeling-ID beheer instellen voor afdrukken of faxen vanaf een computer). Als het selectievakje voor deze instelling echter is ingeschakeld, kunt u afdrukken vanaf een computer zonder de id en pincode in te voeren.
0CSC-098 Communicatie beperken door firewalls in te stellen Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten. Op deze manier wordt de communicatie beperkt tot apparaten met bepaalde IP-adressen of MAC-adressen.
0CSC-099 IP-adressen opgeven voor firewallregels U kunt de communicatie beperken tot alleen apparaten met bepaalde IP-adressen of apparaten met specifieke IP-adressen blokkeren maar andere communicatie toestaan. U kunt een afzonderlijk IP-adres opgeven of een bereik van IP-adressen. OPMERKING U kunt maximaal 16 IP-adressen (of bereiken van IP-adressen) opgeven voor zowel IPv4 als IPv6. De hier beschreven pakketfilters besturen de communicatie over TCP, UDP en ICMP.
[IPv4-adres: Infilter] Selecteer deze optie om het ontvangen van gegevens van het apparaat naar een computer te beperken door IPv4-adressen op te geven. [IPv6-adres: Uitfilter] Selecteer deze optie om het verzenden van gegevens vanaf het apparaat naar een computer te beperken door IPv6-adressen op te geven. [IPv6-adres: Infilter] Selecteer deze optie om het ontvangen van gegevens van het apparaat naar een computer te beperken door IPv6-adressen op te geven. 5 Geef de instellingen voor pakketfiltering op.
Een bereik van adressen opgeven met een voorvoegsel Typ het adres, gevolgd door een schuine streep en een getal dat de lengte van het voorvoegsel aangeeft. 192.168.0.32/27 fe80::1234/64 Als [Weigeren] is geselecteerd voor een uitgaand filter Uitgaande multicast- en broadcast-pakketten kunnen niet worden gefilterd. Een IP-adres verwijderen uit de uitzonderingen Selecteer een IP-adres en klik op [Verwijderen]. 3 6 Klik op [OK]. Start de machine opnieuw op.
0CSC-09A MAC-adressen opgeven voor firewallregels U kunt de communicatie beperken tot alleen apparaten met bepaalde MAC-adressen of apparaten met specifieke MAC-adressen blokkeren maar andere communicatie toestaan. U kunt maximaal 32 MAC-adressen opgeven. BELANGRIJK Deze functie is niet beschikbaar wanneer het apparaat is verbonden met een draadloos LAN. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/Registratie].
5 Geef de instellingen voor pakketfiltering op. Selecteer de voorwaarde (het standaardbeleid) om de communicatie van andere apparaten met het apparaat toe te staan of te weigeren en geef vervolgens MAC-adressen op voor uitzonderingen. 1 Schakel het selectievakje [Gebruik filter] in en selecteer het keuzerondje [Weigeren] of [Toestaan] voor het [Standaardbeleid]. [Gebruik filter] Schakel het selectievakje in om de communicatie te beperken. Schakel het selectievakje uit om de beperking op te heffen.
OPMERKING U kunt de instellingen voor IP-adresfilters in- of uitschakelen vanaf KOPPELINGEN IP-adressen opgeven voor firewallregels 㻠㻝㻥㻌㻛㻌㻢㻤㻠 .
0CSC-09C Poortnummers wijzigen Poorten vormen het eindpunt van het communicatietraject tussen apparaten. Belangrijke protocollen maken meestal gebruik van vaste poortnummers. Een nadeel hiervan is dat apparaten met deze poortnummers kwetsbaar zijn voor aanvallen, iedereen weet de poortnummers namelijk. De netwerkbeheerder kan de beveiliging verder verbeteren door andere poortnummers te gebruiken.
0CSC-09E Een proxy instellen Een proxy (of HTTP-proxyserver) verwijst naar een computer of software die HTTP-communicatie uitvoert voor andere apparaten, met name bij communicatie met bronnen buiten het netwerk, zoals bij het browsen op websites. De clientapparaten maken via de proxyserver verbinding met het externe netwerk en communiceren niet rechtstreeks met de externe bronnen.
[Gebruik Proxy] Schakel het selectievakje in om de opgegeven proxyserver te gebruiken voor communicatie met een HTTP-server. [HTTP Proxy-serveradres] Voer het adres van de proxyserver in. Geef het IP-adres op of de hostnaam, afhankelijk van de omgeving. [HTTP Proxy-server poortnummer] Wijzig eventueel het poortnummer. Voer een nummer in tussen 1 en 65535.
0CSC-09F De functies van de machine beperken De kans bestaat dat sommige functies van de machine bijna nooit worden gebruikt of aanleiding geven voor misbruik. Uit veiligheidsoverwegingen kunt u de functionaliteit van de machine beperken door deze functies geheel of gedeeltelijk uit te schakelen.
0CSC-09H Beperkingen instellen voor de toegang tot het adresboek en verzendfuncties (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Bepaalde vormen van informatielekkage kunt u voorkomen door de beschikbare bestemmingen voor faxen en e-mails te beperken tot de bestemmingen in het adresboek of op LDAP-servers. Een andere manier is om een pincode in te stellen voor het adresboek, zodat onbevoegde gebruikers het adresboek niet kunnen aanpassen.
0CSC-09J Een pincode instellen voor het adresboek U kunt instellen dat gebruikers een pincode moeten invoeren om nieuwe vermeldingen toe te voegen aan het adresboek of bestaande vermeldingen aan te passen. Als u een pincode instelt voor het adresboek, wordt de kans kleiner dat documenten worden verstuurd naar verkeerde ontvangers omdat het adresboek alleen nog kan worden gewijzigd door gebruikers die de pincode weten. 1 2 Druk op .
0CSC-09K Beperkingen instellen voor beschikbare bestemmingen Door het aantal faxnummers dat bij het verzenden van documenten kan worden opgegeven, te beperken tot de nummers die al in het adresboek zijn opgeslagen, de nummers die eerder zijn gebruikt of de nummers waarnaar kan worden gezocht vanaf de LDAP-servers, verkleint u de kans op onjuiste bestemmingen en op het lekken van informatie door gebruikers.
0CSC-09L Faxen via de pc uitschakelen (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) U kunt instellen dat gebruikers geen faxen kunnen versturen vanaf een computer. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als het aanmeldingsscherm verschijnt, gebruikt u de numerieke toetsen om de juiste combinatie van ID en pincode in te voeren. .
0CSC-09R Eerder gebruikte bestemmingen blokkeren U kunt het selecteren van eerder gebruikte bestemmingen en instellingen uit de transmissierapporten uitschakelen voor het faxen of het scannen naar e-mail of een gedeelde map. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als het aanmeldingsscherm verschijnt, gebruikt u de numerieke toetsen om de juiste combinatie van ID en pincode in te voeren. .
0CSC-09S Bestemmingen controleren vóór het verzenden van documenten Door het faxnummer twee keer in te voeren verkleint u de kans dat een document door onjuiste invoer naar een verkeerd nummer wordt gestuurd. Gebruik functies die in dit gedeelte worden beschreven als u vertrouwelijke documenten verzendt.
Selecteer deze optie om de details van de ingevoerde code voor verkort kiezen niet weer te geven. Selecteer deze optie om de details van de ingevoerde code voor verkort kiezen weer te geven. 5 Druk op .
0CSC-09U Groepsverzending blokkeren (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Groepsverzending is een functie waarmee u achter elkaar faxen naar verschillende ontvangers kunt sturen. Deze functie kunt u desgewenst uitschakelen. 1 2 Druk op . Druk op / om te selecteren en druk vervolgens op . Als het aanmeldingsscherm verschijnt, gebruikt u de numerieke toetsen om de juiste combinatie van ID en pincode in te voeren. .
0CSC-09W Beperkingen instellen voor USB-functies USB is een handige manier om randapparatuur aan te sluiten en gegevens op te slaan of te verplaatsen. Bij een onjuist beheer kan USB echter ook een bron van informatielekkage zijn. Wees voorzichtig wanneer u USB-geheugenapparaten gebruikt. Dit gedeelte beschrijft hoe u de verbinding via de USB-poort van het apparaat kunt beperken en hoe u het gebruik van USB-geheugenapparaten kunt uitsluiten.
3 4 Selecteer en druk op Selecteer en druk op . . Selecteer deze optie om te voorkomen dat gegevens worden opgeslagen op een USB-geheugenapparaat. Gescande gegevens kunnen niet worden opgeslagen op het USB-geheugenapparaat. Selecteer deze optie als gegevens mogen worden opgeslagen op een USB-geheugenapparaat. 5 Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan.
0CSC-09X HTTP-communicatie uitschakelen HTTP wordt gebruikt voor communicatie via het netwerk, bijvoorbeeld wanneer u het apparaat bedient via de UI op afstand. Als u een USB-verbinding gebruikt of HTTP om een andere reden niet nodig hebt, kunt u het protocol uitschakelen om aanvallen van kwaadwillende gebruikers via de ongebruikte HTTP-poort te voorkomen.
0CSC-09Y De UI op afstand uitschakelen De UI op afstand is handig omdat u dan instellingen voor de machine kunt opgeven via een webbrowser op een computer. U kunt de UI op afstand alleen gebruiken als de machine via het netwerk is verbonden met een computer. Als de machine via USB met een computer is verbonden, of als u de UI op afstand niet nodig hebt, kunt u de interface uitschakelen om het risico te verkleinen dat de machine door kwaadwillende gebruikers op afstand wordt bediend via het netwerk.
0CSC-0A1 Geavanceerde beveiligingsfuncties implementeren Bevoegde gebruikers kunnen worden benadeeld door aanvallen van kwaadwillende personen, bijvoorbeeld door sniffing, spoofing en het manipuleren van gegevens die over een netwerk worden verzonden. Om uw belangrijke en kostbare gegevens te beschermen tegen deze aanvallen, ondersteunt de machine de volgende functies te verbetering van de veiligheid en beveiliging.
0CSC-0A2 Met SSL gecodeerde communicatie inschakelen voor de UI op afstand U kunt met behulp van SSL (Secure Sockets Layer) de communicatie coderen die plaatsvindt tussen het apparaat en een webbrowser op de computer. SSL is een mechanisme voor het coderen van gegevens die over het netwerk worden verzonden of ontvangen. SSL moet zijn ingeschakeld wanneer u de UI op afstand gebruikt voor het opgeven van instellingen voor IPSec (Gedeelde sleutelmethode), verificatie met IEEE 802.1X (TTLS/PEAP) of SNMPv3.
OPMERKING Details van een certificaat weergeven U kunt de details van het certificaat controleren of het certificaat verifiëren door op de juiste tekstkoppeling onder [Sleutelnaam] Sleutelparen en digitale certificaten verifiëren te klikken of op het pictogram van het certificaat. 6 7 Schakel SSL in voor de UI op afstand. 1 Klik op [Beveiligingsinstellingen] 2 Klik op [Bewerken...]. 3 Schakel het selectievakje [Gebruik SSL] in en klik op [OK]. [Instellingen UI op afstand].
De UI op afstand starten met SSL Als u probeert de UI op afstand te starten terwijl SSL is ingeschakeld, kan er een waarschuwing worden weergegeven met betrekking tot het beveiligingscertificaat. Controleer in dat geval of de juiste URL is ingevoerd in het adresveld en ga dan verder De UI op afstand starten om het scherm van de UI op afstand weer te geven.
0CSC-0A3 IPSec-instellingen configureren Internet Protocol Security (IPSec of IPsec) bestaat uit een verzameling protocollen voor het coderen van gegevens die worden getransporteerd over een netwerk, inclusief internet-netwerken.
IPSec-instellingen configureren U kunt IPSec pas gebruiken voor gecodeerde communicatie als u beleidsinstellingen voor beveiliging hebt geregistreerd. Een dergelijke beleidsinstelling bestaat uit de hieronder beschreven groepen met instellingen. U kunt maximaal 10 beleidsinstellingen registreren. Als u klaar bent met de instellingen, geeft u de volgorde aan waarin u de beleidsinstellingen wilt toepassen.
5 Schakel het selectievakje [Gebruik IPSec] in en klik op [OK]. Als het apparaat alleen pakketten mag ontvangen die voldoen aan een van de beleidsinstellingen die u hieronder definieert, schakelt u het selectievakje [Ontvangst non-policy pakketten] uit. 6 Klik op [Nieuw beleid registreren...]. 7 Geef de beleidsinstellingen op. 8 1 Typ in het vak [Policy-naam] maximaal 24 alfanumerieke tekens als naam voor de set met beleidsinstellingen. 2 Schakel het selectievakje [Beleid inschakelen] in.
[Lokaal adres] Selecteer het keuzerondje voor het type IP-adres van het apparaat waarop u het beleid wilt toepassen. [Alle IPadressen] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten. [IPv4-adres] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten die van of naar het IPv4-adres van het apparaat worden verstuurd. [IPv6-adres] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten die van of naar het IPv6-adres van het apparaat worden verstuurd.
Een bereik van adressen opgeven Plaats een afbreekstreepje tussen de adressen. 192.168.0.10192.168.0.20 Een bereik van adressen opgeven met een voorvoegsel (alleen IPv6) Typ het adres, gevolgd door een schuine streep en een getal dat de lengte van het voorvoegsel aangeeft. fe80::1234/64 [Subnetinstellingen] Als u het IPv4-adres handmatig invoert, kunt u een bereik opgeven door het subnetmasker te gebruiken. Voer het subnetmasker in en gebruik punten om getallen te scheiden (bijvoorbeeld:"255.255.255.
3 Geef instellingen op voor [Geldig voor] en [Authentificatie]/[Encryptie]/[DH groep]. Een sleutelpaar en vooraf geïnstalleerde CA-certificaten gebruiken voor verificatie 1 Selecteer het keuzerondje [Methode digitale handtekening] bij [Authentificatiemethode] en klik op [Sleutel en certificaat...]. 2 Klik op [Registreer standaardsleutel] naast het sleutelpaar dat u wilt gebruiken.
[Selecteer algoritme] Schakel het selectievakje [ESP], [ESP (AES-GCM)] en/of [AH (SHA1)] in, afhankelijk van de gebruikte IPSec-header en algoritme. AES-GCM is een algoritme voor zowel verificatie als codering. Als [ESP] is geselecteerd, moet u ook algoritmen voor verificatie en codering selecteren in de vervolgkeuzelijsten [ESP-authentificatie] en [ESP encryptie]. [ESPauthentificatie] Als u ESP-verificatie wilt inschakelen, selecteert u [SHA1] als het hash-algoritme.
0CSC-0A4 IEEE 802.1X-verificatie configureren De machine kan als een clientapparaat worden aangesloten op een 802.1X-netwerk. Een doorsnee 802.1X-netwerk bestaat uit een RADIUS-server (verificatieserver), een LAN-switch (authenticator) en clientapparaten met verificatiesoftware (supplicants). Als een apparaat probeert verbinding te maken met het 802.1X-netwerk, moeten de gebruikersgegevens worden geverifieerd om er zeker van te zijn dat de verbinding tot stand wordt gebracht door een bevoegde gebruiker.
4 5 Klik op [Bewerken...]. Schakel het selectievakje [Gebruik IEEE 802.1X] in, typ de aanmeldingsnaam in het vak [Loginnaam] en geef de vereiste instellingen op. [Gebruik IEEE 802.1X] Schakel dit selectievakje in om verificatie met IEEE 802.1X mogelijk te maken. [Loginnaam] Typ maximaal 24 alfanumerieke tekens als de naam (EAP-identiteit) die wordt gebruikt voor het identificeren van de gebruiker. TLS instellen 1 Schakel het selectievakje [Gebruik TLS] in en klik op [Sleutel en certificaat...].
OPMERKING Details weergeven van een sleutelpaar of certificaat U kunt de details van het certificaat controleren of het certificaat verifiëren door op de gewenste tekstkoppeling onder Sleutelparen en digitale certificaten verifiëren [Sleutelnaam] te klikken of op het pictogram van het certificaat. TTLS/PEAP instellen 1 Schakel het selectievakje [Gebruik TTLS] of [Gebruik PEAP] in. OPMERKING: Intern protocol voor TTLS U kunt MSCHAPv2 of PAP selecteren.
[Gebruikersnaam] Gebruik maximaal 24 alfanumerieke tekens voor de gebruikersnaam. [Wijzig wachtwoord] Als u het wachtwoord wilt instellen of wijzigen, schakelt u het selectievakje in en typt u maximaal 24 tekens voor het nieuwe wachtwoord in de vakken [Wachtwoord] en [Bevestigen]. 6 Klik op [OK]. 7 Start de machine opnieuw op. Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. OPMERKING U kunt IEEE 802.1X-verificatie in- of uitschakelen vanaf . IEEE 802.
0CSC-0A5 Instellingen configureren voor sleutelparen en digitale certificaten Om de communicatie te coderen met een extern apparaat, moet vooraf een coderingssleutel worden verzonden en ontvangen via een onbeveiligd netwerk. Dit probleem wordt opgelost door cryptografie met openbare sleutels.
0CSC-0A6 Sleutelparen genereren U kunt een sleutelpaar genereren met de machine als dit nodig is voor gecodeerde communicatie via SSL (Secure Sockets Layer). U kunt SSL gebruiken wanneer u de machine gebruikt via de UI op afstand. U kunt maximaal vijf sleutelparen opslaan op de machine. 1 2 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. De UI op afstand starten Klik op [Instellingen/Registratie]. 3 Klik op [Beveiligingsinstellingen] 4 Klik op [Sleutel aanmaken...].
[Sleutelinstellingen] [Sleutelnaam] Gebruik maximaal 24 alfanumerieke tekens voor de naam van het sleutelpaar. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] RSA wordt gebruikt om een sleutelpaar te genereren. Selecteer de sleutellengte in de vervolgkeuzelijst. Hoe groter het aantal is voor de sleutellengte, hoe trager de communicatie verloopt. De beveiliging echter is krachtiger.
0CSC-0A7 Door een CA uitgegeven sleutelparen en digitale certificaten gebruiken Sleutelparen en digitale certificaten voor gebruik met het apparaat zijn verkrijgbaar bij een certificeringsinstantie (CA). U kunt deze bestanden opslaan en vervolgens registreren via de UI op afstand. Zorg ervoor dat het sleutelpaar en het certificaat voldoen aan de vereisten van het apparaat ( Vereisten voor sleutels en certificaten).
De vooraf geïnstalleerde CA-certificaten uit- of inschakelen Klik op [Uitschakelen] naast het vooraf geïnstalleerde CA-certificaat dat u wilt uitschakelen. Als u het certificaat weer wilt inschakelen, klikt u nogmaals op [Inschakelen] naast het certificaat. 5 Klik op [Installeren...]. OPMERKING: Een sleutelpaar of CA-certificaat verwijderen Klik op [Verwijderen] naast het bestand dat u wilt verwijderen en klik vervolgens op [OK]. 6 Klik op [Bladeren...
KOPPELINGEN Sleutelparen genereren Sleutelparen en digitale certificaten verifiëren Met SSL gecodeerde communicatie inschakelen voor de UI op afstand IPSec-instellingen configureren IEEE 802.
0CSC-0A8 Sleutelparen en digitale certificaten verifiëren Als u sleutelparen en CA-certificaten hebt geregistreerd, kunt u de gegevens van deze onderdelen bekijken of hun geldigheid en handtekening controleren. 1 2 3 4 Start de UI op afstand en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/Registratie]. Klik op [Beveiligingsinstellingen] [Instellingen Sleutel en certificaat] (voor sleutelparen) of [Instellingen CA-certificaat] (voor CA-certificaten).
Het resultaat van het verifiëren van het certificaat wordt zoals hieronder weergegeven.
0CSC-0A9 De UI op afstand gebruiken Als u een webbrowser gebruikt om het apparaat op afstand te bedienen, kunt u de documenten die wachten om te worden afgedrukt, of de status van het apparaat controleren. U kunt ook enkele instellingen uitvoeren, zoals het opslaan van het adresboek. U hoeft uw bureau dus niet te verlaten om systeembeheertaken uit te voeren.
0CSC-0AA De UI op afstand starten Om het apparaat op afstand te bedienen, moet u het IP-adres van het apparaat in een webbrowser invoeren en de UI op afstand opstarten. Controleer vooraf het IP-adres dat op het apparaat is ingesteld ( Netwerkinstellingen weergeven). Als u vragen hebt, neemt u contact op met de netwerkbeheerder. 1 2 Start de webbrowser. Typ "http://(het IP-adres van de machine)/" in het adresveld en druk op [Enter].
㻠㻢㻝㻌㻛㻌㻢㻤㻠
0CSC-0AC Schermen van de UI op afstand In dit gedeelte worden de belangrijkste schermen van de UI op afstand beschreven. Portaalpagina (hoofdpagina) Pagina [Status monitor/Annuleren] Pagina [Instellingen/Registratie] Pagina [Adresboek] (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Portaalpagina (hoofdpagina) [Afmelden] Hiermee meldt u zich af bij de UI op afstand. UI staat trouwens voor User Interface, ofwel gebruikersinterface in het Nederlands.
Pagina [Status monitor/Annuleren] [Naar portaal] Keert terug naar de portaalpagina (hoofdpagina). Menu Klik op een item en de inhoud wordt weergegeven op de rechterpagina. controleren Documenten beheren en de status van de machine Navigatiepad De reeks van pagina's die u hebt geopend om bij de huidige pagina te komen. U kunt hier zien welke pagina wordt weergegeven. Pictogram Vernieuwen Hiermee vernieuwt u de weergegeven pagina.
OPMERKING Systeembeheer instellingen U kunt alleen [Instellingen Systeembeheer] opgeven als u bent aangemeld in de systeembeheerdersmodus. Als u zich hebt aangemeld in de eindgebruikersmodus, wordt alleen de optie [Systeembeheer] weergegeven. Pagina [Adresboek] (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) [Naar portaal] Geeft de portaalpagina (hoofdpagina) weer. [Favorieten] Hiermee geeft u de favorietenlijst weer.
0CSC-0AE Documenten beheren en de status van de machine controleren De huidige status van afdruktaken controleren Taakgeschiedenis controleren Foutgegevens controleren Apparaatspecificaties controleren Gegevens van systeembeheerder controleren Totaal aantal afdrukken controleren OPMERKING De bestandsnaam van het document geeft slechts 32 tekens weer. De afgedrukte toepassingsnaam kan aan de bestandsnaam worden toegevoegd.
Foutgegevens controleren Als er een fout optreedt, kunt u deze pagina weergeven door op de portaalpagina (hoofdpagina) op het bericht te klikken onder Portaalpagina (hoofdpagina) [Foutgegevens]. Meld u aan bij de UI op afstand ( De UI op afstand starten) [Status monitor/Annuleren] [Foutgegevens] Apparaatspecificaties controleren U kunt de maximale afdruksnelheid en de geheugencapaciteit voor beveiligd afdrukken weergeven.
Meld u aan bij de UI op afstand ( De UI op afstand starten) [Status monitor/Annuleren] [Apparaatinformatie] Totaal aantal afdrukken controleren U kunt controleren hoeveel pagina's er in totaal zijn afgedrukt, gekopieerd en als fax zijn ontvangen.
0CSC-0AK Menuopties instellen via de UI op afstand U kunt verschillende instellingen van de machine wijzigen met de UI op afstand. De meeste instellingen kunnen ook via het bedieningspaneel van de machine worden gewijzigd, maar sommige instellingen kunt u alleen wijzigen via de UI op afstand. OPMERKING U kunt de instellingen onder de [Instellingen Systeembeheer] alleen wijzigen als u zich aanmeldt in de systeembeheerdersmodus. 1 2 3 Start de UI op afstand.
Printerinstellingen Printerinstellingen Rapportinstellingen Rapporten en lijsten afdrukken Systeembeheer instellingen Systeembeheer Instellingen Systeembeheer Afdeling ID beheer Afdeling-ID beheer configureren Netwerkinstellingen Netwerk Beveiligingsinstellingen Beveiliging Communicatiebeheerinstellingen / Instellingen voor doorsturen Instellingen Systeembeheer Importeren/Exporteren Geregistreerde gegevens opslaan/laden Initialiseer instellingsgegevens Menu initialiseren KOPPELINGEN Scherm
0CSC-0AF Geregistreerde gegevens opslaan/laden Vermeldingen in het adresboek of instellingen van menuopties die op het apparaat zijn opgeslagen, kunt u overbrengen naar uw computer (exporteren). Omgekeerd kan ook. Gegevens die zijn opgeslagen op uw computer kunnen worden overgebracht naar het apparaat (importeren). U kunt de bestemmingen in het adresboek gemakkelijk kopiëren naar meerdere apparaten.* Om deze functies te gebruiken, moet u aangemeld zijn in de systeembeheerdersmodus.
0CSC-0AH Het adresboek opslaan of laden (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt geregistreerde adresboekgegevens opslaan op uw computer of adresboekgegevens op uw computer overbrengen naar het apparaat. Andere apparaten kunnen de opgeslagen inhoud importeren die van dit apparaat is geëxporteerd en omgekeerd * . * Dit is mogelijk niet beschikbaar afhankelijk van het model.
5 Volg de aanwijzingen op het scherm om de locatie op te geven voor het geëxporteerde adresboek. Het adresboek wordt opgeslagen. BELANGRIJK Bedien het apparaat niet totdat het proces is voltooid. Het scherm blijft hetzelfde tijdens de exportbewerking. Gebruik de UI op afstand pas weer als onder aan het scherm het bericht [The (file name) download has completed.] (Het downloaden van (bestandsnaam) is voltooid.) wordt weergegeven.
Als u wordt gevraagd een pincode voor het adresboek in te voeren, voert u de [PIN] in en klikt u op [OK]. instellen voor het adresboek 4 Klik op [Importeren]. 5 Geef aan welk adresboekbestand u wilt importeren en klik op [Start importeren]. Een pincode U kunt aangeven welk bestand u wilt importeren door op [Bladeren...] te klikken en het bestand te selecteren. U kunt ook bij [Bestandspad] de locatie van het bestand opgeven, samen met de bestandsnaam. 6 Klik op [OK].
0CSC-0AJ Instellingen opslaan/laden U kunt de instellingen van menuopties opslaan op uw computer of de geregistreerde gegevens opslaan op het apparaat. De geëxporteerde gegevens kunnen worden geïmporteerd. Als u hetzelfde model gebruikt, kunnen andere apparaten de gegevens importeren die van dit apparaat zijn geëxporteerd en omgekeerd. Deze bewerkingen kunt u alleen uitvoeren als u zich hebt aangemeld in de systeembeheerdersmodus.
3 Klik op [Importeren/Exporteren] 4 Klik op [Start exporteren]. 5 Volg de aanwijzingen op het scherm om de locatie op te geven voor de geëxporteerde instellingen. [Menu]. De instellingen worden opgeslagen. BELANGRIJK Bedien het apparaat niet totdat het proces is voltooid. Het scherm blijft hetzelfde tijdens de exportbewerking. Gebruik de UI op afstand pas weer als onder aan het scherm het bericht [The (file name) download has completed.] (Het downloaden van (bestandsnaam) is voltooid.
3 Klik op [Importeren/Exporteren] 4 Klik op [Importeren]. 5 Geef aan welk bestand met instellingen u wilt importeren en klik op [Start importeren]. [Menu]. U kunt aangeven welk bestand u wilt importeren door op [Bladeren...] te klikken en het bestand te selecteren. U kunt ook bij [Bestandspad] de locatie van het bestand opgeven, samen met de bestandsnaam. 6 Klik op [OK]. De instellingen uit het opgegeven bestand worden geïmporteerd op de machine. 7 Start het apparaat opnieuw op.
Schakel het apparaat uit, wacht minimaal 10 seconden en schakel het apparaat weer in.
0CSC-0AL Adresboek wijzigen via de UI op afstand (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt het adresboek van het apparaat opslaan of bewerken via de computer. OPMERKING U kunt de instellingen alleen wijzigen als u zich aanmeldt in de systeembeheerdersmodus. 1 2 Start de UI op afstand. De UI op afstand starten Klik op [Adresboek]. OPMERKING: Als de pagina voor het invoeren van de pincode wordt weergegeven Het adresboek is beveiligd met een pincode.
U kunt een geregistreerd item verwijderen door op de bijbehorende knop [Verwijderen] te klikken. 5 Selecteer [Type bestemming om te registreren] en klik op [OK]. 6 Geef de vereiste instellingen op en klik op [OK].
0CSC-0AR Overzicht van menuopties Er zijn verschillende instellingen in dit apparaat. U kunt alle opties uitgebreid aanpassen. Druk op opties.
0CSC-0AS Netwerkinstellingen Alle instellingen voor het netwerk worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" gelden alleen voor de MF8580Cdw / MF8280Cw. Opties gemarkeerd met "*2" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8540Cdn.
Handmatig invoeren Selecteer deze optie om een draadloze verbinding te configureren door handmatig een SSID in te voeren. Als u deze methode De verbinding instellen door gedetailleerde gebruikt, kunt u gedetailleerde instellingen opgeven voor verificatie en codering.
Handmatig verkrijgen IP-adres: 0.0.0.0 Subnet Mask: 0.0.0.0 Gateway-adres: 0.0.0.0 Controleer instellingen Automatisch verkrijgen IP-adres Subnet Mask Gateway-adres PING-commando Selecteer deze optie om te controleren of de machine via een netwerk is verbonden met een computer. testen De netwerkverbinding DNS-instellingen Kies deze optie om instellingen op te geven voor DNS (Domain Name System), een mechanisme voor het omzetten van DNS configureren hostnamen in IP-adressen.
Uit Aan Controleer instellingen Stateful adres Lengte voorvoegsel DNS-instellingen Kies deze optie om instellingen op te geven voor DNS (Domain Name System), een mechanisme voor het omzetten van DNS configureren hostnamen in IP-adressen. Instellingen DNS-hostnaam/domeinnaam Gebr.
Schakel automatisch bladeren en verkrijgen van informatie voor de printer of scanner in of uit door het WSD-protocol te gebruiken Afdrukprotocollen en WSD-functies configureren dat beschikbaar is op Windows Vista/7/8/Server 2008/Server 2012. Instellingen WSD-afdrukken Gebruik WSD-afdrukken Uit Aan Gebruik WSD-bladeren Uit Aan Instellingen WSD-scannen Gebruik WSD-scannen Uit Aan Gebruik Scan naar computer Uit Aan Gebruik Multicast Discovery Uit Aan Gebruik HTTP Hiermee kunt u HTTP in- of uitschakelen.
SNMPv1-instellingen Hiermee kunt u SNMPv1 in- of uitschakelen. Als u SNMPv1 inschakelt, geeft u een communitynaam en toegangsmachtigingen op voor MIB-objecten (Management Information Base). Uit Aan start het apparaat opnieuw op of selecteer SNMPv3-instellingen Hiermee kunt u SNMPv3 in- of uitschakelen. Gebruik de UI op afstand om gedetailleerde instellingen op te geven die moeten worden toegepast wanneer SNMPv3 is ingeschakeld.
start het apparaat opnieuw op Wachttijd voor verbinding bij opstart Kies deze optie om de wachttijd in te stellen waarna verbinding wordt gemaakt met het netwerk. Selecteer de tijd afhankelijk van de Een wachttijd instellen voor verbinding met een netwerk netwerkomgeving. 0 t/m 300 (sec.) Instellingen Ethernet stuurprogramma Hiermee selecteert u de communicatiemodus van Ethernet (Half duplex/Full duplex) en het type Ethernet (10BASE-T/100BASE-TX).
0CSC-0AU Voorkeuren Alle instellingen voor het geluidsvolume en de display worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8280Cw. Opties gemarkeerd met "*2" hebben per land of regio afwijkende standaardinstellingen.
Aan Drie niveaus Alleen bij fout Drie niveaus Scan gereed signaal *1 Geef aan of de machine een geluidssignaal moet produceren als het scannen van faxdocumenten is voltooid. U kunt ook het volume van het geluid aanpassen. Uit Aan Drie niveaus Alleen bij fout Drie niveaus Invoersignaal Geef aan of de machine een geluidssignaal moet produceren als een toets op het bedieningspaneel wordt ingedrukt.
Standaardscherm na opstart/herstel De standaardinstelling is dat het beginscherm van de kopieerfunctie wordt weergegeven wanneer u de machine inschakelt of nadat er een automatische reset is uitgevoerd. U kunt echter een ander scherm kiezen dat standaard moet worden weergegeven in deze situaties.
Duur berichtweergave Als er twee berichten worden weergegeven op het scherm, bepaalt deze optie hoelang elk bericht wordt weergegeven voordat het volgende bericht opnieuw wordt weergegeven. 1 t/m 2 t/m 5 (sec.) waarde in voor het interval voer een Scroll-snelheid Selecteer deze optie om de snelheid voor het scrollen (bladeren) op het scherm in te stellen op één van de drie niveaus.
selecteer een taal Taal UI op afstand *2 Hiermee selecteert u de taal voor de schermen van de UI op afstand.
0CSC-0AW Tijdklokinstellingen Alle instellingen voor de timer worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1'' kunnen niet via de UI op afstand worden geïmporteerd of geëxporteerd. Opties gemarkeerd met "*2" zijn mogelijk niet beschikbaar of hebben per land of regio afwijkende standaardinstellingen. Opties gemarkeerd met "*3" gelden alleen voor de MF8540Cdn / MF8230Cn.
Inst. Huidige datum en tijd *1 Hiermee stelt u de huidige datum en tijd in. Druk op geven of om te schakelen tussen /. / om de cursor te verplaatsen en op / om de datum en tijd op te BELANGRIJK Selecteer een waarde voor voordat u de huidige datum en tijd gaat instellen. Als u de waarde voor wijzigt, worden de huidige datum en tijd automatisch aangepast. stel de datum en tijd in
selecteer een maand en dag Automatische resettijd Als er gedurende een bepaalde tijd geen toets wordt ingedrukt op het bedieningspaneel, wordt er een zogenaamde automatische reset uitgevoerd en wordt het standaardscherm weergegeven. Geef het interval op waarop automatisch resetten wordt uitgevoerd. Selecteer <0> als u het apparaat niet automatisch wilt resetten.
niet geactiveerd als het instellingenmenu wordt weergegeven. Gebruik de standaardinstellingen om zo veel mogelijk stroom te besparen. De slaapstand instellen MF8580Cdw / MF8550Cdn / MF8540Cdn 10 t/m 60 (min.) MF8280Cw / MF8230Cn 20 t/m 60 (min.) Automatische uitschakeltijd Als het onderstaande scherm wordt weergegeven (de machine is online voor scanbewerkingen) en vervolgens gedurende bepaalde tijd geen toets wordt ingedrukt, wordt de machine automatisch offline geschakeld.
0CSC-0AX Algemene instellingen Alle instellingen voor de bediening van de papierlade en de papierinvoermethode worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" zijn alleen beschikbaar als de optionele papierlade (lade 2) is geplaatst. Opties gemarkeerd met "*2" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8280Cw. Opties gemarkeerd met "*3" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8540Cdn. Autom.
Select the function selecteer de papierbron selecteer of Functies Selecteer de functie waarvoor u automatische ladeselectie wilt configureren. OPMERKING: Selecteer voor functies zoals het afdrukken van rapporten en lijsten, en het afdrukken van afbeeldingen op een USB-geheugenapparaat. Papierbronnen Selecteer de papierbron waarvoor u de functie wilt inschakelen.
Papierbronnen Selecteer de papierbron waarvoor u de instelling wilt wijzigen. Als u papier gebruikt waarop vooraf een logo is afgedrukt, moet u de afdrukzijde wijzigen als u enkelzijdig of dubbelzijdig afdrukt. OPMERKING: U kunt het beste selecteren als het niet uitmaakt op welke zijde er wordt afgedrukt.
0CSC-0AY Kopieerinstellingen Alle instellingen voor het kopiëren worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" zijn alleen beschikbaar voor de MF8580Cdw / MF8550Cdn / MF8540Cdn. Opties gemarkeerd met "*2" zijn alleen beschikbaar als de optionele papierlade (lade 2) is geplaatst. Wijzigen van standaardinstellingen U kunt de standaardinstellingen voor kopiëren wijzigen.
Geel: 17 niveaus Magenta: 17 niveaus Cyaan: 17 niveaus Zwart: 17 niveaus 㻡㻜㻝㻌㻛㻌㻢㻤㻠
0CSC-0C0 Faxinstellingen (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Alle instellingen voor het faxen worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Instellingen die zijn gemarkeerd met "*1" zijn mogelijk niet beschikbaar of hebben een andere standaardwaarde, afhankelijk van het land waar u het apparaat gebruikt. Opties gemarkeerd met "*2" zijn alleen beschikbaar voor de MF8580Cdw / MF8550Cdn / MF8540Cdn.
Instellingen voor TX-functie Hiermee kunt u instellingen opgeven voor het versturen van faxen. Wijzigen van standaardinstellingen Hiermee kunt u instellingen opgeven voor het versturen van faxen. De geselecteerde instellingen worden gebruikt als de De standaardinstellingen wijzigen standaardinstellingen voor het scannen van documenten. Resolutie 200 x 100 200 x 200 200 x 200 200 x 400 400 x 400 dpi dpi dpi dpi dpi (Normaal) (Fijn) (Foto) (Superfijn) (Ultrafijn) Densiteit Negen niveaus 2-Z.
duur van de pauze op geef de Automatische nummerherhaling *1 Kies deze optie om instellingen op te geven voor automatische nummerherhaling, een functie waarmee een faxnummer na enkele minuten automatisch opnieuw wordt gekozen als de eerste poging is mislukt omdat de lijn bezet is. U kunt opgeven hoe vaak het apparaat het nummer opnieuw kiest en de tijd tussen de pogingen voor nummerherhaling.
geef de instellingen op Hiermee bepaalt u waar op de verzonden fax de toegevoegde gegevens worden afgedrukt. Selecteer om de gegevens binnen het beeldvlak af te drukken of om de gegevens buiten het beeldvlak te plaatsen. Hiermee wordt de aanduiding "FAX" of "TEL" toegevoegd vóór het faxnummer dat is geregistreerd voor het apparaat ( Het faxnummer en de naam van het apparaat registreren).
Inkomend belsignaal *1 Kies deze optie om instellingen op te geven voor het weergeven van een belsignaal bij een binnenkomende fax. Deze functie is alleen beschikbaar wanneer of is geselecteerd als de ontvangstmodus. Geef aan hoe vaak u een belsignaal wilt horen bij een binnenkomende fax. U kunt er ook voor kiezen geen belsignaal weer te geven.
RX afdrukinstellingen Hiermee kunt u instellingen opgeven voor het afdrukken van ontvangen faxen. Afdrukken op beide zijden *2 Kies deze optie om instellingen op te geven voor het dubbelzijdig afdrukken van ontvangen faxen. Uit Aan Verklein RX-formaat Hiermee kunt u instellingen opgeven voor het verkleinen van een ontvangen document.
Kies deze optie om aan te geven of u aan de onderkant van ontvangen faxen bepaalde informatie wilt afdrukken, zoals de datum en tijd van ontvangst en paginanummers. Uit Aan Doorgaan met afdrukken als toner bijna op is Als u faxberichten ontvangt wanneer de toner bijna op is, bewaart het apparaat deze in het geheugen in plaats van deze af te drukken. Als deze functie echter is ingeschakeld, gaat het apparaat verder met afdrukken.
0CSC-0C1 Scaninstellingen Alle instellingen voor het scannen worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8540Cdn. Opties gemarkeerd met "*2'' kunnen niet via de UI op afstand worden geïmporteerd of geëxporteerd.
Bericht Antwoord aan Geen Opgeven vanuit het adresboek Prioriteit Laag Standaard Hoog Windows (SMB) Scanformaat A4 A5 Bestandsindeling PDF (Compact) PDF JPEG TIFF Densiteit Negen niveaus Origineeloriëntatie Portret Landschap Type origineel Tekst Tekst/Foto Foto 2-Z.
PDF (Compact) PDF JPEG TIFF Densiteit Negen niveaus Origineeloriëntatie Portret Landschap Type origineel Tekst Tekst/Foto Foto 2-Z. origineel *1 Uit Type boek Type kalender Scherpte Zeven niveaus Bestandsgrootte Klein: Geheugenprioriteit Standaard Groot: Beeldkwaliteit-prioriteit Beeldinstellingen uitvoerbestand Kies deze optie om instellingen op te geven voor de gammawaarde en de verhouding voor bestandscompressie bij het converteren van gescande documenten naar bestanden.
Scan -> PC1 Uit USB-aansluiting Kleurenscan Zwart/wit-scan Gebruikersformaat Gebruikersformaat Netwerkaansluiting Kleurenscan Zwart/wit-scan Gebruikersformaat Gebruikersformaat Scan -> PC2 Uit USB-aansluiting Kleurenscan Zwart/wit-scan Gebruikersformaat Gebruikersformaat Netwerkaansluiting Kleurenscan Zwart/wit-scan Gebruikersformaat Gebruikersformaat 1 2 1 2 1 2 1 2 Bevestig bestemming Scan -> PC1 Scan -> PC2 㻡㻝㻞㻌㻛㻌㻢㻤㻠
0CSC-0C2 Inst. Geheugenmedia afdrukken Alle instellingen voor het afdrukken van geheugenmedia worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" zijn alleen beschikbaar als de optionele papierlade (lade 2) is geplaatst. Opties gemarkeerd met "*2" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8540Cdn.
Details Afbeeldingen of selecteer Selecteer deze optie om bestandsnamen en datums in een lijst weer te geven. Selecteer deze optie om miniaturen weer te geven. Standaardinstellingen bestandssortering Geef aan of u de bestanden op een USB-geheugenapparaat oplopend of aflopend wilt sorteren op bestandsnaam of datum.
Hiermee worden bestandsnamen weergegeven met maximaal acht tekens. Om een onderscheid te maken tussen bestanden met gelijksoortige namen, worden er nummers als "~ 1" of "~ 2" toegevoegd aan het einde van de bestandsnamen. Hiermee worden bestandsnamen weergegeven met maximaal 20 tekens. OPMERKING Het aantal tekens hierboven is exclusief de tekens in bestandsextensies, zoals ".jpg".
0CSC-0C3 Printerinstellingen Alle instellingen voor de printer worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met een sterretje (* ) zijn alleen beschikbaar voor de MF8580Cdw / MF8550Cdn / MF8540Cdn. Prioriteit van instellingen Instellingen die worden opgegeven in een programma of in het printerstuurprogramma hebben prioriteit boven de instellingen op het apparaat.
<2-Zijdig afdrukken> selecteer of Standaardpapier * Selecteer de standaardinstelling voor het formaat en type papier waarop u gaat afdrukken. OPMERKING en kunt u niet afzonderlijk opgeven. Geef het papierformaat op in het scherm en het papiertype in het scherm . Standaard papierformaat Selecteer de standaardinstelling voor het formaat papier waarop u gaat afdrukken.
Papierformaat negeren Geef aan of u wilt schakelen tussen papier van A4-formaat en het formaat LTR als één van deze papierformaten is geladen, maar het Printerinstellingen configureren op het apparaat andere formaat niet. Uit Aan Afdrukkwaliteit * Kies deze optie om instellingen op te geven voor de afdrukkwaliteit, zoals de tonerdichtheid en methoden voor het verwerken van beeldgegevens. Densiteit Hier kunt u de dichtheid (densiteit) opgeven voor elke tonerkleur.
17 niveaus Medium 17 niveaus Laag 17 niveaus OPMERKING De instellingen voor worden uitgeschakeld wanneer u inschakelt. , of geef de aanpass.)> selecteer de tonerkleur tonerdichtheid op druk op totdat wordt weergegeven. Tonerbesparing Selecteer deze optie om de functie voor tonerbesparing in of uit te schakelen.
Modus Modus Modus Modus Modus Modus 1 2 3 4 5 6 de gewenste modus selecteer Hiermee worden de randen van donker gekleurde tekst, lijnen en afbeeldingen vloeiend afgedrukt. Deze instelling is geschikt voor de meeste afdruktaken. Hiermee worden zowel randen als halftonen in het midden van afbeeldingen vloeiend afgedrukt.
Layout * Kies deze optie om instellingen op te geven voor de paginalay-out, zoals de inbindpositie en marges. Inbindlocatie Selecteer de inbindpositie van het papier (langs de lange of de korte kant). Bij dubbelzijdig afdrukken wordt de beeldrichting in de onderstaande afbeeldingen zijn de marges. automatisch aangepast om de juiste lay-out te krijgen.
Korte zijde verschuiven (Voorkant) Kies deze optie om de afdrukpositie in te stellen door voor de korte zijde aan de voorkant van het papier een verschuivingspercentage op te geven. Een hogere waarde betekent dat de afdrukpositie naar rechts verschuift. Een lagere waarde betekent dat de afdrukpositie naar links verschuift. -50,0 t/m ±0 t/m +50,0 (mm) BELANGRIJK Als door deze instelling gegevens buiten het afdrukbare gebied komen te staan, wordt het gedeelte buiten het afdrukbare gebied niet afgedrukt.
-50,0 t/m ±0 t/m +50,0 (mm) BELANGRIJK Als door deze instelling gegevens buiten het afdrukbare gebied komen te staan, wordt het gedeelte buiten het afdrukbare gebied niet afgedrukt. waarde voor de verschuiving op geef de Lange zijde verschuiven (Achterkant) Kies deze optie om de afdrukpositie in te stellen door voor de lange zijde aan de achterkant van het papier een verschuivingspercentage op te geven.
Timeout * Geef hier de periode op waarna de machine onvolledige afdrukgegevens uit het geheugen moet verwijderen. Onvolledige afdrukgegevens worden verwijderd omdat deze fouten kunnen bevatten waardoor het volgende document niet kan worden afgedrukt. 5 t/m 15 t/m 300 (sec.) OPMERKING Geef het apparaat voldoende tijd om alle afdrukgegevens van de computer te ontvangen, met name als er grote hoeveelheden gegevens worden afgedrukt.
geef de instellingen op Uitvoer v/ gecomprim. afb. * Met deze optie kunt u aangeven hoe afdrukgegevens moeten worden verwerkt als deze te groot zijn voor het geheugen van de machine. U kunt instellen dat de gegevens dan met een lagere beeldkwaliteit worden afgedrukt () of dat het afdrukken moet worden geannuleerd en er een foutbericht moet worden weergegeven ().
Lettergrootte Kies deze optie om het lettertype op te geven dat u wilt gebruiken. Kies hiervoor een nummer tussen 0 en 54. U kunt vanaf het PCL-lettertypelijst (Alleen de bedieningspaneel een lijst afdrukken met voorbeelden van de beschikbare PCL-lettertypen. MF8580Cdw / MF8550Cdn / MF8540Cdn) 0 t/m 54 gewenste lettertype selecteer het nummer van het Puntgrootte Geef de tekengrootte op in punten. U kunt de grootte in stappen van 0,25 aanpassen.
Tekencode Selecteer hier de tekencode (tekenset) die het meest geschikt is voor de computer die u gebruikt om afdrukgegevens te verzenden. De opgegeven instelling wordt genegeerd als de tekencode wordt bepaald door het lettertype dat is opgegeven bij .
X-dimensie Geef hier de horizontale afmeting (korte kant) van het aangepaste papier op. 77 t/m 215 (mm) geef de afmeting op geef de afmeting op Y-dimensie Geef hier de verticale afmeting (lange kant) van het aangepaste papier op.
aangepast aan de breedte van LTR-papier. Uit Aan selecteer of Grijstinten Kies deze optie om de gegevensverwerkingsmethode op te geven die u wilt gebruiken om halftonen te reproduceren. U kunt aangeven of u de functie wilt gebruiken. Daarnaast kunt u of afzonderlijk selecteren voor tekst, afbeeldingen en foto's.
Tekst sRGB Gamma 1,5 Gamma 1,8 Gamma 2,4 Afbeeldingen sRGB Gamma 1,5 Gamma 1,8 Gamma 2,4 Beeld sRGB Gamma 1,5 Gamma 1,8 Gamma 2,4 OPMERKING Deze instelling wordt alleen toegepast als is geselecteerd bij . of selecteer het bronprofiel selecteer , Afdrukprofiel Selecteer hier het afdrukprofiel voor kleurafstemming.
Verzadiging Kolorimetrisch Afbeeldingen Herhalend Verzadiging Kolorimetrisch Beeld Herhalend Verzadiging Kolorimetrisch OPMERKING Deze instelling wordt alleen toegepast als is geselecteerd bij . of selecteer de afstemmethode selecteer , Selecteer deze optie om kleurafstemming uit te voeren die geschikt is voor het afdrukken van foto's als is geselecteerd bij .
of selecteer of selecteer , Hiermee worden grijstinten (zwart en wit) afgedrukt met geel, magenta, cyaan en zwart. De overgangen in donkere gebieden worden hiermee beter gereproduceerd dan bij . Hiermee worden grijstinten (zwart en wit) alleen afgedrukt met de zwarte toner en is er minder sprake van het doorlopen van toner. Selectie van CMS (Overeenst.
Kies deze optie om een gammacorrectiewaarde in te stellen waardoor de helderheid van de afdrukken overeenkomt met die van de originele gegevens. Als de afdruk donkerder of lichter lijkt dan het origineel, past u de gammacorrectiewaarde aan. Hoe hoger de waarde, des te donkerder de afdruk. U kunt deze instelling afzonderlijk opgeven voor tekst, afbeeldingen en foto's.
0CSC-0C4 Aanpassing/Onderhoud Alle instellingen voor de afstelling en het onderhoud van het apparaat worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met een sterretje (* ) zijn alleen beschikbaar als de optionele papierlade (lade 2) is geplaatst. Autom. gradatie-aanpassing Instellingen Autom.
kunt deze aanpassing ook handmatig uitvoeren ( Onjuiste afdrukkleuren corrigeren). Uit Aan selecteer of afdrukkleur wanneer hoofdschakelaar AAN>
Inst. ruw papier Als u op ruw papier afdrukt, en vooral als kleurenafbeeldingen te licht zijn, selecteert u . U kunt deze optie per papierbron instellen. Papiertafel Uit Aan Lade 1 Uit Aan Lade 2 * Uit Aan selecteer de papierbron Vastplakken enveloppen voorkomen Als de flappen van enveloppen tijdens het afdrukken vast gaan zitten aan de envelop zelf, selecteert u .
selecteer of Kies deze optie om enveloppen met normale fixeerkracht te bedrukken. Kies deze optie om enveloppen te bedrukken met een fixeerkracht die hoger is dan bij . Speciale modus P Als het bedrukte papier omkrult, selecteert u .
0CSC-0C5 Instellingen Systeembeheer Alle instellingen voor systeembeheerinstellingen worden kort toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). OPMERKING Sterretjes (* ) Opties gemarkeerd met "*1" gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8280Cw. Opties gemarkeerd met "*2" hebben per land of regio afwijkende standaardinstellingen. Opties gemarkeerd met "*3'' kunnen niet via de UI op afstand worden geïmporteerd of geëxporteerd.
Naam systeembeheerder Gebruik maximaal 32 alfanumerieke tekens voor de naam van de beheerder. Instellingen Apparaatinformatie Typ maximaal 32 alfanumerieke tekens voor de naam en de installatielocatie om de machine te identificeren.
selecteer of start de machine opnieuw op Gebruik IPSec Kies deze optie om aan te geven of u gecodeerde communicatie wilt gebruiken door een VPN (Virtual Private Network) tot stand te IPSec-instellingen configureren brengen via IPSec.
MAC-adresfilter Selecteer deze optie om instellingen in of uit te schakelen voor het filteren van pakketten die zijn verzonden naar of ontvangen van MAC-adressen opgeven voor firewallregels apparaten met opgegeven MAC-adressen.
R-toets instelling Als het apparaat via een telefooncentrale met het netwerk is verbonden, moet de toegangsmethode worden ingesteld. U kunt het type telefooncentrale instellen op of . Als u het nummer voor het kiezen van een buitenlijn toewijst aan de R-toets, kunt u eenvoudig een buitenlijn kiezen.
Finland (FI) Frankrijk (FR) Duitsland (DE) Griekenland (GR) Hongarije (HU) Ierland (IE) Italië (IT) Jordanië (JO) Luxemburg (LU) Slovenië (SI) Zuid-Afrika (ZA) Spanje (ES) Zweden (SE) Zwitserland (CH) Oekraïne (UA) Groot Brittannië (GB) Overige selecteer een land of regio Instellingen voor doorsturen *1 *3 Kies deze optie om in te stellen dat alle ontvangen faxen worden doorgestuurd naar een bepaalde bestemming.
Hiermee kunt u beperkingen opgeven ten aanzien van het faxen of mailen naar geselecteerde bestemmingen. Adresboek PIN Kies deze optie om een pincode in te stellen die moet worden ingevoerd om nieuwe vermeldingen toe te voegen aan het adresboek of Een pincode instellen voor het adresboek om bestaande vermeldingen te wijzigen.
Aan start de machine opnieuw op selecteer of USB-apparaat Aan/Uit Hiermee kunt u de USB-poort in- of uitschakelen waarmee de machine kan worden verbonden met een computer. instellen voor de USB-verbinding met een computer Beperkingen Uit Aan Opslaan in USB-geheugen Geef aan of gescande documenten mogen worden opgeslagen op een USB-geheugenapparaat.
Uit Aan Instellingen Beveiligde afdruk *5 Schakel beveiligd afdrukken in of uit. Documenten beveiligd afdrukken Uit Aan Beveiligde afdruk wistijd 10 t/m 30 t/m 240 (min.) PDL-selectie (Plug and Play) Selecteer een paginabeschrijvingstaal (PDL), zodat de machine wordt gedetecteerd als een printer die compatibel is met die taal wanneer de machine via Plug and Play wordt aangesloten op een computer.
Hiermee wordt de machine gedetecteerd en verbonden als een PCL5-printer. Hiermee wordt de machine gedetecteerd en verbonden als een PCL6-printer. Update firmware *3 Bepaal aan de hand van de omgeving waarin de machine wordt gebruikt hoe u de update van de firmware wilt installeren. Selecteer deze optie om de firmware-update op de website van Canon zelf handmatig te installeren. Raadpleeg de handleiding op de website voor installatie-instructies.
0CSC-0C6 Menu initialiseren Selecteer deze optie om voor de onderstaande instellingen de standaardwaarden te herstellen. U kunt alle Menu initialiseren instellingen in één keer herstellen of alleen bepaalde instellingen. OPMERKING Sterretjes (* ) Opties gemarkeerd met een sterretje (* ) gelden alleen voor de MF8580Cdw / MF8550Cdn / MF8280Cw. Voorkeuren Tijdklokinstellingen Algemene instellingen Kopieerinstellingen Faxinstellingen * Scaninstellingen Inst.
0CSC-0C7 Problemen oplossen Als er een probleem optreedt, raadpleegt u dit hoofdstuk om oplossingen te zoeken voordat u contact opneemt met Canon. Papierstoringen Als een document of papier vastloopt, raadpleegt u Papierstoringen verhelpen om het vastgelopen papier te verwijderen. Er wordt een bericht of foutcode weergegeven Als het scherm een bericht of foutcode (drie cijfers) weergeeft, raadpleegt u de volgende gedeeltes.
0CSC-0C8 Papierstoringen verhelpen Als het papier is vastgelopen, wordt weergegeven op het scherm. Druk op om eenvoudige oplossingen weer te geven. Als u de procedures op het scherm niet goed begrijpt, raadpleegt u de volgende gedeeltes om storingen te verhelpen. MF8580Cdw / MF8550Cdn / MF8540Cdn Vastgelopen documenten in de documentinvoer (MF8580Cdw / MF8550Cdn / MF8540Cdn)
1 2 3 Verwijder het vastgelopen document uit de klep van de documentinvoer. 1 Open de klep van de documentinvoer. 2 Zet de hendel in de ontgrendelstand. 3 Trek het document voorzichtig uit de invoer. Verwijder het vastgelopen document uit de binnenste klep van de invoer. 1 Houd de groene knop vast en open de binnenste klep. 2 Trek het document voorzichtig uit de invoer. 3 Sluit de binnenste klep. Duw de hendel in de vergrendelstand en sluit de klep van de documentinvoer.
1 Open de klep aan de voorzijde. 2 Zet het bedieningspaneel omhoog. 3 Trek het papier voorzichtig uit het apparaat. 4 Laat het bedieningspaneel zakken en sluit de klep aan de voorzijde. Papierstoringen in de sleuf voor handmatige invoer (MF8580Cdw / MF8550Cdn / MF8540Cdn) Als er papier in de lade is geplaatst, verwijdert u dit eerst. Trek het vastgelopen papier niet hardhandig uit het apparaat. Als het vastgelopen papier niet gemakkelijk kan worden verwijderd, gaat u verder met de volgende stap.
BELANGRIJK: Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Pak de groene knoppen vast en duw het aangegeven onderdeel naar beneden. 3 Trek het papier voorzichtig uit het apparaat. BELANGRIJK: Raak het rubberen stootkussen niet aan. Hierdoor kan de afdrukkwaliteit afnemen. 3 Pak de groene knoppen vast en plaats het onderdeel terug.
BELANGRIJK: Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Trek het papier voorzichtig uit het apparaat. Als de optionele papierlade (lade 2) is bevestigd, trekt u het papier op dezelfde manier uit het apparaat. 3 4 Plaats de papierlade. Als het onderstaande scherm wordt weergegeven, drukt u op op . / om te selecteren.
4 Pak de groene knoppen vast en sluit de duplexeenheid ( 5 Trek het papier voorzichtig uit het apparaat. 6 Sluit de achterklep. ) totdat u deze vast hoort klikken. Vastgelopen documenten in de documentinvoer (MF8280Cw / MF8230Cn) Als er documenten in de documentinvoer zijn geplaatst, verwijdert u deze eerst. Volg daarna de onderstaande procedure. 1 Open de klep van de documentinvoer. 2 Trek het document voorzichtig uit de invoer. 3 Sluit de klep van de documentinvoer.
Papierstoringen aan de voor- en achterzijde 1 Zet het bedieningspaneel omhoog. 2 Trek het papier voorzichtig uit het apparaat. 3 4 Laat het bedieningspaneel zakken. Open de achterklep. 5 Trek het papier voorzichtig uit het apparaat. 6 Sluit de achterklep. Papierstoringen in de sleuf voor handmatige invoer (MF8280Cw / MF8230Cn) 1 Trek de papierlade uit.
BELANGRIJK: Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Open de klep. 3 Pak de groene knoppen vast en duw het aangegeven onderdeel naar beneden. 4 Trek het papier voorzichtig uit het apparaat. 5 Pak de groene knoppen vast en plaats het onderdeel uit de afbeelding terug. Sluit vervolgens de klep.
0CSC-0C9 Er wordt een foutbericht weergegeven Als u geen fax kunt verzenden, het geheugen vol is of als er bedieningsproblemen zijn, verschijnt er een bericht op het scherm. In de volgende lijst worden deze foutberichten toegelicht. Afdrukken in kleur is beperkt. Wilt u inloggen? Afdrukken in kleur is uitgeschakeld in Afdelings-id beheer. Selecteer en meld u aan met een Afdeling ID waarvoor afdrukken in kleur niet is uitgeschakeld. Een Afdeling ID en pincode kunt u opvragen bij uw beheerder.
Het papierformaat dat op het bedieningspaneel is geselecteerd, komt niet overeen met het geladen papierformaat. Zorg ervoor dat het formaat papier dat is opgegeven bij overeenkomt met het formaat van het geladen papier. Het geladen papier gebruiken Zorg ervoor dat overeenkomt met het formaat van het geladen papier.
De tonercartridge is bijna leeg. We raden u aan de tonercartridge te vervangen. Tonercartridges vervangen De magenta tonercartridge is bijna helemaal leeg. De tonercartridge is bijna leeg. We raden u aan de tonercartridge te vervangen. Tonercartridges vervangen De zwarte tonercartridge is bijna helemaal op. De tonercartridge is bijna leeg. We raden u aan de tonercartridge te vervangen. Tonercartridges vervangen Faxen is beperkt. Wilt u inloggen? Faxen is uitgeschakeld in Afdelings-id beheer.
wijzigen in . De verbinding instellen door een draadloze router te selecteren De verbinding instellen door gedetailleerde instellingen op te geven De verificatiemethode van de machine is ingesteld op , maar die van de draadloze router op "Open systeem". Wijzig de WEP-verificatiemethode in "Gedeelde sleutel" op de draadloze router en maak opnieuw verbinding. Raadpleeg voor meer informatie de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant.
Controleer de netwerksleutel (de WPA-, WPA2-PSK- of WEP-sleutel) van de draadloze router en stel de sleutel opnieuw in op de machine. Raadpleeg voor meer informatie de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant. De SSID en de netwerksleutel controleren De verbinding instellen door een draadloze router te selecteren De verbinding instellen door gedetailleerde instellingen op te geven Het geheugen is vol.
Het USB-geheugen is beperkt. De functie om gescande documenten op te slaan op een USB-geheugenapparaat is uitgeschakeld. Stel in op . Beperkingen instellen voor het scannen naar USB Kan Cloud-afdr. niet gebruiken. (Fout met servercommunicatie.) Afdrukken via de cloud is niet mogelijk omdat er een fout is opgetreden. Controleer of het apparaat een correcte verbinding heeft met een draadloze LAN of bekabelde LAN.
Kan geen groep aangeven. Er is een groep opgegeven als bestemming na het indrukken van . Als u op hebt gedrukt, kunt u geen groepsbestemming meer opgeven. Druk op op het scherm en geef bestemmingen op om faxdocumenten te verzenden zonder op te drukken. Kan geen RX-gegevens afdrukken. Een ontvangen document kan vanwege de volgende oorzaken niet worden afgedrukt: Er moet een tonercartridge worden vervangen. Er is een klep geopend.
De verbinding is mislukt vanwege een fout tijdens het instellen van de draadloze LAN-verbinding. Start de machine opnieuw op en geef de instellingen nogmaals op. Als het probleem ook blijft optreden nadat u het apparaat opnieuw hebt opgestart, controleert u of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk.
De toner is bijna op. Zorg dat er een vervangende tonercartridge beschikbaar is. Informatie over vervangende tonercartridges Maak de gele tonercartridge gereed. De toner is bijna op. Zorg dat er een vervangende tonercartridge beschikbaar is. Informatie over vervangende tonercartridges Maak de magenta tonercartridge gereed. De toner is bijna op. Zorg dat er een vervangende tonercartridge beschikbaar is. Informatie over vervangende tonercartridges Maak de zwarte tonercartridge gereed.
Papier vastgelopen. Er is papier vastgelopen. Verwijder het vastgelopen papier of document, en druk opnieuw af (mogelijk wordt het afdrukken automatisch verder uitgevoerd). Papierstoringen verhelpen Een document kan niet worden afgedrukt via de sleuf voor handmatige invoer omdat de papierlade niet goed is ingesteld. Geef de juiste instellingen op voor de papierlade en zorg dat deze goed in het apparaat is geplaatst.
afdelings-id weer en schakel het selectievakje [Scanopdrachten met onbekende ID's toestaan] in. Taken blokkeren indien afdelings-id onbekend Tonercartridge bijna leeg. Verv. tonercartridge aanbev. Er is een tonercartridge geplaatst die niet de gewenste afdrukkwaliteit kan leveren omdat de cartridge bijna leeg is of vanwege andere redenen. We raden u aan de tonercartridge te vervangen. U kunt doorgaan met afdrukken, maar de afdrukkwaliteit is mogelijk niet goed.
Verwijder de nokjes/stukjes tape van de tonercartridge. De afdichtingstape van de tonercartridges is niet verwijderd. Verwijder de afdichtingstape. Tonercartridges voorbereiden Tonercartridges vervangen WEP-sleutel niet juist ingesteld. Controleer WEP-instellingen. De netwerksleutel (de WEP-sleutel) van een draadloze router waarmee verbinding moet worden gemaakt, is niet goed ingesteld op de machine.
0CSC-0CA Er wordt een foutcode weergegeven Als het afdrukken mislukt, u een fax of gescand document niet kunt verzenden of ontvangen of als er een andere fout optreedt, wordt die fout als een foutcode van drie cijfers weergegeven in een rapport of een bericht op het scherm . Raadpleeg de volgende informatie om voor een foutcode mogelijke oorzaken en oplossingen weer te geven. Als u een foutrapport wilt afdrukken, leest Rapporten en lijsten afdrukken.
# 018 Het verzenden van een fax is mislukt omdat de machine van de ontvanger niet heeft gereageerd vanwege een bezette lijn of andere oorzaken. Als het apparaat van de ontvanger is uitgeschakeld of als de lijn bezet is, kan een fax mogelijk niet worden verzonden. Vraag de ontvanger de status van het apparaat te controleren. Als u een fax naar het buitenland stuurt, voeg dan pauzes toe aan het faxnummer. Faxen verzenden # 022 Het versturen van een fax vanaf een computer is niet toegestaan.
Documenten rechtstreeks scannen naar een USB-geheugen # 406 Een gescand document kan door een fout niet worden opgeslagen op een USB-geheugenapparaat. Koppel het USB-geheugenapparaat los en sluit het weer aan. Documenten rechtstreeks scannen naar een USB-geheugen Scan een kleiner aantal documenten. # 701 Verificatie is mislukt omdat er een ongeldige afdelings-id of pincode is ingevoerd terwijl de functie AfdelingsID-beheer is ingeschakeld. Voer de juiste afdelings-id en pincode in.
# 753 Het mailen of opslaan van gescande gegevens in een gedeelde map is mislukt omdat de LAN-kabel is losgekoppeld. Controleer of de LAN-kabel goed is aangesloten. Verbinding maken met een bekabeld LAN # 755 Het mailen of opslaan van gescande gegevens in een gedeelde map is mislukt omdat TCP/IP niet goed werkt. Controleer of de waarden voor juist zijn ingesteld. Netwerkinstellingen Er is geen IP-adres ingesteld. Stel het IP-adres op de juiste manier in.
# 804 Er zijn geen toegangsbevoegdheden verleend voor de gedeelde map. Controleer of de gebruikersnaam en het wachtwoord die zijn geregistreerd voor de bestemming overeenkomen met de gebruikersaccount (gebruikersnaam en wachtwoord) die is geregistreerd voor de gedeelde map. Als u meer wilt weten over gedeelde mappen, raadpleegt u de Gids Instelling Verzenden (op de User Software CD (cd met Een gedeelde map instellen als een opslaglocatie of Adresboek wijzigen via de UI gebruikerssoftware)).
# 822 Een afbeeldingsbestand op een USB-geheugenapparaat kan niet worden afgedrukt omdat de indeling van het bestand niet wordt ondersteund. Bewaar de afbeelding in een ondersteunde bestandsindeling, zodat u het afbeeldingsbestand kunt afdrukken. Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenapparaten) # 839 Een gebruikersnaam en een wachtwoord die worden gebruikt voor SMTP-verificatie zijn niet goed ingesteld. Stel de gebruikersnaam en het wachtwoord juist in.
# 852 De machine wordt onverwachts uitgeschakeld. Controleer of de stekker goed in het stopcontact zit. # 853 Een document kan niet worden afgedrukt omdat de hoeveelheid gegevens groter is dan de verwerkingslimiet van de machine. Het is mogelijk dat het apparaat geen documenten met een groot aantal pagina's kan afdrukken. Druk minder pagina's tegelijk af of druk pas af als er geen taken meer in de wachtrij staan of als er geen documenten worden afgedrukt.
# 995 Een document dat wacht op verzending is geannuleerd. Verzend het document eventueel opnieuw.
0CSC-0CC Veelvoorkomende problemen Als er problemen ontstaan tijdens het gebruiken van de machine, controleer dan de tips in dit gedeelte voordat u contact met ons opneemt. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
0CSC-0CE Problemen met installatie/instellingen Zie ook Veelvoorkomende problemen. OPMERKING Pictogrammen in de beschrijving Probleem met de draadloze LAN-verbinding Probleem met de bekabelde LAN-verbinding Probleem met de USB-verbinding De machine kan niet tegelijkertijd via een draadloos LAN, een bekabeld LAN en een USB-kabel met een computer worden verbonden. Het is niet mogelijk om de drie verschillende verbindingstypen tegelijkertijd te gebruiken.
Controleer of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk. Als het apparaat geen verbinding kan maken met de draadloze LAN De machine belt in naar een onbedoelde bestemming (als er een inbelrouter is aangesloten op het netwerk). Als een inbelrouter geen broadcast-pakketten hoeft door te geven, stelt u de router zo in dat deze pakketten niet worden doorgegeven. Als de inbelrouter broadcast-pakketten moet doorgeven, controleert u of de instellingen juist zijn.
Als de draadloze router is ingesteld zoals hieronder beschreven, wijzigt u de instellingen van de router. Het filteren van gegevenspakketten op MAC-adres is ingesteld. Als alleen IEEE 802.11n wordt gebruikt voor de draadloze communicatie, wordt WEP geselecteerd of de WPA/WPA2encryptiemethode wordt ingesteld op TKIP. De stealth-modus wordt geactiveerd.
0CSC-0CF Problemen bij het kopiëren Zie ook Veelvoorkomende problemen. Het afdrukresultaat is niet goed. Het papier is gekreukeld of krult om.
0CSC-0CH Problemen bij het afdrukken Zie ook Veelvoorkomende problemen. Het afdrukresultaat is niet goed. Het papier is gekreukeld of krult om. Als u niet goed kunt afdrukken U kunt niet afdrukken. Is er een printerstuurprogramma op uw computer geïnstalleerd en werkt dit programma goed? Installatiehandleiding MF-stuurprogramma Het afdrukken gaat langzaam. * Maak ruimte vrij door gegevens in het geheugen af te drukken of te verwijderen.
0CSC-0CJ Problemen bij het faxen of met de telefoon (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Zie ook Veelvoorkomende problemen. Problemen bij het verzenden Een fax wordt niet verzonden. Is de externe telefoonlijn bezet? Wacht tot de lijn vrij is. Is er een fout opgetreden? Druk het communicatiebeheerrapport af en bekijk de inhoud.
0CSC-0CK Als u niet goed kunt afdrukken Probeer de volgende oplossingen als het afdrukresultaat te wensen overlaat, of als het papier gekreukeld is of omkrult. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
0CSC-0CL Het afdrukresultaat is niet goed Als het apparaat van binnen vies is, kan dit gevolgen hebben voor het afdrukresultaat. Reinig het apparaat zorgvuldig. Het apparaat reinigen Vlekken aan de onderzijde van afdrukken Drukt u gegevens af zonder marges? Dit symptoom doet zich voor als een marge is ingesteld op Geen in het printerstuurprogramma. Marges van 5 mm of minder rond de rand van het papier of 10 mm of minder rond de rand van enveloppen vallen buiten het bedrukbare gebied van het apparaat.
Gebruikt u geschikt papier? Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Papier Papier plaatsen Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges. Tonercartridges vervangen Afdrukken zijn vaag Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges.
Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges. Tonercartridges vervangen De afdrukken zijn grijsachtig Is de toner bijna op? Controleer hoeveel toner er nog is en vervang zo nodig een of meer van de tonercartridges.
0CSC-0CR Het papier krult om of is gekreukeld Gekreukeld papier Is het papier goed geladen? Als de stapel papier hoger is dan de markering voor het maximale aantal vellen of schuin in de lade ligt, kunnen er kreukels of vouwen ontstaan. Papier plaatsen Gebruikt u papier dat vochtig is geweest? Gebruik nieuw papier dat helemaal droog is. Papier plaatsen Gebruikt u geschikt papier? Controleer het papier dat u kunt gebruiken en druk af met geschikt papier.
0CSC-0CS Papier wordt niet goed ingevoerd Afdrukken zijn scheef Zijn de papiergeleiders afgesteld op de randen van het papier? Als de papiergeleiders te los of te strak zitten, zijn de afdrukken scheef. Papier plaatsen Wordt het papier ingevoerd via de sleuf voor handmatige invoer? Plaats het papier in de papierlade. Papier in de papierlade plaatsen Drukt u af op omgekrulde enveloppen? Strijk de enveloppen glad en druk opnieuw af.
0CSC-0CU Wanneer een probleem niet kan worden opgelost Als u door het raadplegen van de informatie in dit hoofdstuk een probleem nog steeds niet kunt oplossen, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. BELANGRIJK Het is niet toegestaan het apparaat te demonteren of te repareren. Als u dat wel doet, bestaat de kans dat de garantie vervalt.
0CSC-0CW Onderhoud In dit hoofdstuk wordt het onderhoud van de machine beschreven, inclusief het reinigen van de machine en het initialiseren van instellingen.
0CSC-0CX Het apparaat reinigen Maak de machine regelmatig schoon om te voorkomen dat de afdrukkwaliteit afneemt en om de machine veilig en prettig te kunnen Onderhoud en inspecties gebruiken. Lees eerst de veiligheidsinstructies door voordat u aan de slag gaat.
0CSC-0CY Behuizing Wrijf de behuizing van het apparaat regelmatig schoon, vooral bij de ventilatieopeningen, om het apparaat in goede conditie te houden. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd.
0CSC-0E0 Glasplaat Verwijder regelmatig stof van de glasplaat en de onderzijde van de invoer om vlekken op documenten of afdrukken te voorkomen. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd.
0CSC-0E1 Documentinvoer Er kan zich stof en grafietpoeder verzamelen op de rol in de invoer, met vlekken op de afdrukken als gevolg. Voer de onderstaande procedure uit om de invoer te reinigen. Als u de invoer gaat reinigen, hebt u tien vellen papier van A4- of Letter-formaat nodig. Leg de Documenten plaatsen vellen in de invoer voordat u deze procedure gaat uitvoeren. 1 2 3 4 Druk op .
0CSC-0E2 Fixeereenheid Er kan zich vuil verzamelen op de fixeereenheid in het apparaat, met zwarte strepen op afdrukken als gevolg. Voer de onderstaande procedure uit om de fixeereenheid te reinigen. U kunt de fixeereenheid niet reinigen als de wachtrij van het apparaat documenten bevat die nog moeten worden afgedrukt. U hebt normaal papier van A4-of Letter-formaat nodig om de fixeereenheid te reinigen.
0CSC-0E3 Transfer-band Er kan zich vuil verzamelen op de transfer-band in de machine, met als gevolg dat de afdrukkwaliteit afneemt. Voer de onderstaande procedure uit om de transfer-band te reinigen. U kunt de transfer-band niet reinigen als de wachtrij van de machine documenten bevat die nog moeten worden afgedrukt. 1 2 3 4 Druk op . Druk op / om te selecteren en druk vervolgens op Selecteer en druk op Druk op . . . Het reinigen begint.
0CSC-0E4 Tonercartridges vervangen U ziet een bericht op het display van de machine als een tonercartridge bijna leeg is. De afdrukkwaliteit neemt flink af als u dan gewoon blijft afdrukken zonder actie te ondernemen. U kunt het resterende tonerniveau controleren op het display. Er wordt een bericht weergegeven Afdrukken zijn van slechte kwaliteit Het tonerniveau controleren Er wordt een bericht weergegeven Het bericht dat wordt weergegeven, is afhankelijk van de resterende hoeveelheid toner.
mogelijk niet optimaal is. De reden hiervoor is dat een tonercartridge die bijna leeg is nog in de machine is geplaatst. Het is raadzaam de tonercartridge te vervangen. Druk op om terug te gaan naar het hoofdscherm. BELANGRIJK U kunt blijven afdrukken als dit bericht wordt weergegeven, maar de afdrukkwaliteit neemt dan waarschijnlijk wel af. Afdrukken zijn van slechte kwaliteit Als uw afdrukken één van de onderstaande kenmerken gaat vertonen, is één van de tonercartridges bijna leeg.
0CSC-0E5 Tonercartridges vervangen Lees de veiligheidsvoorschriften in Onderhoud en inspecties en 1 Open de klep aan de voorzijde. 2 Trek de lade met de tonercartridges naar buiten. Verbruiksartikelen voordat u tonercartridges gaat vervangen. MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 3 Trek de lege tonercartridge recht omhoog uit de houder. 4 Haal de nieuwe tonercartridge uit de beschermende verpakking.
BELANGRIJK: Bij het verwijderen van de afdichtingstape Als er tape achterblijft in een tonercartridge, kan dit gevolgen hebben voor de kwaliteit van afdrukken, inclusief faxen. Het is trouwens niet mogelijk om een fax opnieuw af te drukken, aangezien de faxgegevens direct na het afdrukken automatisch worden verwijderd. Trek de afdichtingstape niet schuin of onder een hoek uit de cartridge. Als de tape scheurt, kunt u misschien niet meer alle tape verwijderen.
0CSC-0E6 Informatie over vervangende tonercartridges De gemiddelde capaciteit van de tonercartridges ziet u in de onderstaande tabel. Koop tonercartridges bij een erkende Canon-dealer. Voor een optimale printkwaliteit worden originele tonercassettes van Canon aanbevolen. Neem contact op met de Canon-helpdesk om een dealer bij u in de buurt te zoeken. Hanteer de onderstaande voorzorgsmaatregelen voor het hanteren en opslaan van tonercartridges ( Verbruiksartikelen).
0CSC-0E7 De machine verplaatsen Het apparaat is zwaar. Volg altijd de onderstaande procedures als u het apparaat gaat verplaatsen om lichamelijk letsel te voorkomen. Belangrijke veiligheidsinstructies Lees ook altijd de veiligheidsvoorschriften voordat u aan de slag gaat. 1 Schakel het apparaat en de computer uit. Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd.
MF8280Cw / MF8230Cn 6 Zet het apparaat voorzichtig neer op de nieuwe gebruikslocatie. Zie Het apparaat instellen voor informatie over het installeren van het apparaat nadat u dit hebt verplaatst.
0CSC-0E8 Afdrukkwaliteit handhaven en verbeteren Als de afdrukresultaten te wensen overlaten, zoals een lage beeldkwaliteit, slechte reproduceerbaarheid of onjuiste afdrukkleuren, probeert u de onderstaande correcties. Automatische gradatie-aanpassing Als de dichtheid of helderheid van kleuren verschilt in afdrukken en originelen, voert u de optie uit om de kleuren nauwkeuriger te reproduceren.
0CSC-0E9 De gradatie corrigeren Gradatie verwijst naar de overgang van donker naar licht van de tinten van een kleur. Hoe meer tinten in de gradaties van kleuren die worden afgedrukt, des te natuurlijker de afdrukken. Als de reproduceerbaarheid van kleuren slecht is en de dichtheid en helderheid van afdrukken duidelijk afwijken van de originelen, kunt u een automatische aanpassing of correctie uitvoeren. Controleer voordat u de gradatie gaat aanpassen of er nog voldoende toner is.
6 7 Open de documentinvoer nadat het tweede scherm hierboven niet meer wordt weergegeven. Plaats de correctieafbeelding op de glasplaat met de afdrukzijde naar beneden. Leg het papier zo dat de zwarte streep zich aan de achterzijde van de machine bevindt. 8 9 Sluit de documentinvoer voorzichtig. Druk op (Kleur). De correctieafbeelding wordt gescand en de aanpassing begint. Na ongeveer 30 seconden wordt de tweede correctieafbeelding afgedrukt.
Is er nog voldoende toner voor het uitvoeren van de correctie? Het tonerniveau controleren Is de transfer-band van het apparaat vies? Transfer-band Snelle aanpassing Met dit type aanpassing wordt de geoptimaliseerde status gehandhaafd die is verkregen met . Dit type aanpassing kunt u niet uitvoeren als bepaalde bewerkingen actief zijn, zoals scannen en afdrukken. Als het resultaat van deze aanpassing te wensen overlaat, voert u de optie uit.
3 4 5 Selecteer . Controleer of het papier dat is geladen overeenkomt met het formaat en het type op het scherm en druk op . Bevestig de procedure en druk op . De aanpassing wordt uitgevoerd. Na ongeveer 1 minuut wordt er een correctieafbeelding afgedrukt. 6 7 Open de documentinvoer nadat het tweede scherm hierboven niet meer wordt weergegeven. Plaats de correctieafbeelding op de glasplaat met de afdrukzijde naar beneden.
Transfer-band 㻢㻝㻝㻌㻛㻌㻢㻤㻠
0CSC-0EA Onjuiste afdrukkleuren corrigeren Er kan sprake zijn van onjuiste afdrukkleuren als de positie van kleuren verschuiven wanneer voor het afdrukken van één afbeelding meerdere tonercartridges nodig zijn. Het gevolg is dat afdrukken er vaag uit kunnen zien. Voer de volgende procedure uit om onjuiste afdrukkleuren te corrigeren. Dit type aanpassing wordt soms automatisch uitgevoerd, bijvoorbeeld als er een tonercartridge is vervangen.
0CSC-0EC Waarden aanpassen voor reproduceerbaarheid van tekstkleur in kleurendocumenten Als de kopieerresultaten van zwarte of zwartachtige tekst niet naar wens zijn, kunt u de reproduceerbaarheid van de kleuren aanpassen met deze correctie. Deze correctiewaarde kan onafhankelijk worden ingesteld in de documentinvoer en de glasplaat. OPMERKING De instellingen worden toegepast op kleurenkopieën wanneer is ingesteld op of ( Documenttype selecteren).
0CSC-0EE Rapporten en lijsten afdrukken U kunt de resultaten van faxtaken bekijken en de instellingen van de machine controleren door rapporten en lijsten af te drukken. TX-resultaatrapport Hiermee kunt u de logboeken van verzonden documenten controleren. MF8550Cdn / MF8540Cdn / MF8280Cw) TX-resultaatrapport (Alleen de MF8580Cdw / Communicatiebeheerrapport Hiermee kunt u de logboeken van verzonden en ontvangen documenten controleren.
0CSC-0EF TX-resultaatrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt een zogenaamd TX-resultaatrapport afdrukken om de fax- of e-maillogboeken te controleren van verzonden documenten en van documenten die naar een gedeelde map zijn gescand. U kunt het rapport afdrukken na elke transmissie of alleen als er een verzendfout optreedt.
foutcode wilt controleren, drukt u een communicatiebeheerrapport af ( / MF8550Cdn / MF8540Cdn / MF8280Cw)). Communicatiebeheerrapport (Alleen de MF8580Cdw OPMERKING Een deel van een faxdocument afdrukken in het rapport Wanneer u of selecteert, kunt u een deel van een faxdocument opnemen in het rapport. Stel
0CSC-0EH Communicatiebeheerrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt de fax- en e-maillogboeken van verzonden en ontvangen documenten controleren door een communicatiebeheerrapport af te drukken. U kunt dit rapport automatisch afdrukken na elke 40 transmissies of handmatig.
0CSC-0EJ RX-resultaatrapport (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) U kunt de logboeken van ontvangen faxdocumenten controleren door een RX-resultaatrapport af te drukken. U kunt het rapport afdrukken na elke transmissie of alleen als er een ontvangstfout optreedt. (Rapport) selecteer de afdrukinstelling Selecteer deze optie als u geen RX-resultaatrapporten wilt afdrukken.
0CSC-0EK Afdelings-ID beheerrapport Als Afdelings-ID beheer is ingeschakeld, kunt u per het totale aantal afdrukken controleren door een Afdelings-ID beheerrapport af te drukken. Als u weet wat voor aantallen er worden afgedrukt, kunt u de voorraad papier en toner beter beheren.
0CSC-0EL Adresboeklijst (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt de lijst met bestemmingen controleren die als , en beschikbaar zijn in het adresboek door een zogenaamde adresboeklijst af te drukken.
0CSC-0ER Lijst gebruikersgegevens / Gegevenslijst systeembeheer U kunt de lijst met instellingen ( Overzicht van menuopties) en de inhoud die op het apparaat is opgeslagen controleren door een lijst met gebruikersgegevens of een lijst met gegevens voor systeembeheer af te drukken. Beide lijsten vermelden het formaat en type papier dat op het apparaat is geregistreerd, plus de afdrukinstellingen van , en .
0CSC-0ES IPSec-beleidslijst U kunt controleren welke beleidsinstellingen en IPSec-instellingen zijn geregistreerd op de machine door het rapport IPSec-beleidslijst af te drukken.
0CSC-0EU PCL-lettertypelijst (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt een lijst afdrukken met de lettertypen die beschikbaar zijn op de machine.
0CSC-0EW Aantal afdrukken weergeven U kunt afzonderlijke totalen opvragen voor het aantal kleurenpagina's dat is afgedrukt en het aantal pagina's in zwart-wit. Deze totalen omvatten faxen, rapporten en lijsten, plus kopieën en afdrukken van gegevens vanaf computers.
0CSC-0EX Instellingen terugzetten op de standaardwaarden U kunt de volgende instellingen herstellen (initialiseren): Menu initialiseren Sleutels en certificaten initialiseren Het adresboek initialiseren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Instellingen voor systeembeheer initialiseren 㻢㻞㻡㻌㻛㻌㻢㻤㻠
0CSC-0EY Menu initialiseren U kunt de instellingen van de machine ( Overzicht van menuopties) terugzetten op de standaardwaarden. OPMERKING Als u de instellingen in en wilt herstellen, raadpleegt u systeembeheer initialiseren.
0CSC-0F0 Sleutels en certificaten initialiseren U kunt de instellingen herstellen van de gebruikte sleutelparen en digitale certificaten. Als u deze bewerking uitvoert, worden alle sleutelparen en certificaten die zijn opgeslagen op de machine verwijderd (behalve de vooraf geïnstalleerde digitale certificaten). OPMERKING Als deze bewerking is voltooid, kunt u geen functies meer gebruiken waarvoor sleutelparen vereist zijn, zoals SSL-gecodeerde communicatie en TLS als onderdeel van IEEE 802.1X-verificatie.
0CSC-0F1 Het adresboek initialiseren (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) U kunt de instellingen van het adresboek terugzetten op de standaardwaarden. Alle gegevens in het adresboek worden hierbij verwijderd.
0CSC-0F2 Instellingen voor systeembeheer initialiseren U kunt de instellingen van de machine ( Overzicht van menuopties) terugzetten op de standaardwaarden. Bij bepaalde instellingen moet de machine opnieuw worden opgestart om de standaardwaarden te herstellen. wilt initialiseren start de machine indien nodig opnieuw op selecteer het item dat u Instellingen voor initialisatie Kies de instelling die u wilt herstellen.
0CSC-0FR Bijlage Dit hoofdstuk bevat de technische specificaties van dit apparaat, instructies voor het gebruik van de e-Handleiding, disclaimers, auteursrechtinformatie en andere belangrijke informatie voor klanten.
0CSC-0FS Handige functies Het is zeker de moeite waard om de functies uit te proberen die in dit hoofdstuk worden beschreven. De functies zijn onderverdeeld in vier categorieën: "Milieubesparing levert geld op", "Efficiënter werken", "Digitaal is beter" en "Ongekende mogelijkheden".
0CSC-0FU Milieubesparing levert geld op Dubbelzijdig afdrukken (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt dubbelzijdig afdrukken gebruiken voor kopieën, afdruktaken verzonden vanaf uw computer en zelfs voor binnenkomende faxen. Aangezien u zo veel minder papier gebruikt, kunt u flink besparen op de papierkosten. Met de toets kunt u nog veel meer papier besparen door tegelijkertijd dubbelzijdig af te drukken en meerdere pagina's op één vel af te drukken.
Zie De slaapstand instellen voor meer informatie over deze functie. Toner besparen Wilt u documenten of concepten afdrukken, maar is de afdrukkwaliteit niet zo belangrijk? U kunt dan een instelling kiezen die minder toner gebruikt. Kijk eens hoe dat bevalt en u kunt eenvoudig toner en geld besparen. Zie Toner besparen voor meer informatie over deze functie.
0CSC-0FW Efficiënter werken Adresboek (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Als u faxnummers en e-mailadressen invoert in het adresboek, hoeft u niet steeds alle cijfers van het nummer of letters van het adres in te voeren als u iets wilt gaan versturen. De adressen die u het vaakst gebruikt, kunt u weergeven met de functie . U kunt dan nog sneller faxen of e-mails sturen naar mensen met wie u veel contact hebt.
Zie Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenapparaten) voor meer informatie over deze functie. Scannen en opslaan naar een USB-stick U kunt papieren documenten scannen en omzetten in JPEG- of PDF-bestanden en deze vervolgens opslaan op een USBstick die u rechtstreeks op de machine hebt aangesloten. Het is dus niet nodig de bestanden eerst op een computer op te slaan of speciale software te gebruiken.
0CSC-0FX Digitaal is beter Scannen en mailen (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) U kunt gescande documenten per e-mail versturen zonder dat u uw computer hoeft aan te zetten. Converteer het gescande document vanaf de machine naar een e-mailbijlage. Als u van de generatie bent die liever een fax verstuurt dan moeilijk doet met een computer, is deze functie de oplossing.
Zie Scaninstellingen configureren in ScanGear MF voor meer informatie over deze functie. Doorzoekbare PDF's U kunt gescande documenten omzetten in gewone PDF-bestanden, maar u kunt ook een stapje verdergaan en de tekst in het gescande document doorzoekbaar maken. Een doorzoekbaar PDF-bestand biedt namelijk veel meer mogelijkheden. U maakt een PDF-bestand doorzoekbaar door "PDF" te kiezen als het scantype wanneer u gaat scannen met MF Toolbox.
0CSC-0FY Ongekende mogelijkheden Eenvoudig afdrukken met Google Cloudprinter Maak vanaf uw laptop of smartphone verbinding met Google Cloudprinter, verstuur uw gegevens en haal de afdrukken op bij het apparaat. Met dit apparaat, Google Cloudprinter en uw mobiele apparaat kunt u altijd en overal afdrukken. Zie Google Cloudprinter gebruiken voor meer informatie over deze functie.
deze functie. Overal faxen ontvangen (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) U hoeft zich geen zorgen meer te maken over het missen van die ene belangrijke fax. Geef een doorstuurbestemming op en alle binnenkomende faxen worden automatisch naar u doorgestuurd. U kunt zelfs een e-mailadres instellen als doorstuurbestemming, zodat de fax binnenkomt op uw tablet of smartphone. Zie Ontvangen faxen doorsturen voor meer informatie over deze functie.
0CSC-0F3 Technische specificaties De technische specificaties van het apparaat kunnen bij verbeteringen van het apparaat zonder vooraankondiging worden gewijzigd.
0CSC-0F4 Apparaatspecificaties MF8580Cdw / MF8550Cdn / MF8540Cdn Type Persoonlijke desktop Elektrische aansluiting *1 220 tot 240 V, 50/60 Hz (De netspanningsvereisten kunnen per land verschillen. Controleer de spanning van het land waar u het apparaat hebt gekocht.) Maximaal 1.
Ongeveer 20 W Opgenomen vermogen Gemiddeld verbruik in de slaapstand Ongeveer 1 W Gemiddeld verbruik in slaapstand (bij een draadloze verbinding) Ongeveer 2 W Als het apparaat volledig is uitgeschakeld 0,5 W of minder Opwarmtijd *2 maximaal 23 seconden Gewicht*3 Ongeveer 26 kg Afmetingen (B x L x H) Zonder accessoires 430 x 484 x 429 mm Met de optionele handset aangesloten 510 x 484 x 429 mm Omgevingsomstandigheden Temperatuur: 10 tot 30°C Relatieve luchtvochtigheid: 20 tot 80% (geen condensvormin
0CSC-0F5 Specificaties van papierlade (optioneel) (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Cassette Feeding Unit-V1 Papiercapaciteit Geschikt papier 250 vellen (60 tot 90 g/m²) Papier Elektrische aansluiting Via het apparaat Afmetingen(B x L x H) 430 x 454 x 102 mm Gewicht Ongeveer 4 kg 㻢㻠㻟㻌㻛㻌㻢㻤㻠
0CSC-0F7 Specificaties draadloos LAN (Alleen de MF8580Cdw / MF8280Cw) Standaard IEEE 802.11g, IEEE 802.11b, IEEE 802.11n Transmissieschema DS-SS-systeem, OFDM-systeem Frequentiebereik 2.412 t/m 2.472 MHz IEEE 802.11g 6/9/12/18/24/36/48/54 Mbps Snelheid gegevensverzending IEEE 802.11b 1/2/5,5/11 Mbps IEEE 802.
0CSC-0F8 Documenttype Ondersteunde documentsoorten Glasplaat Documentinvoer Type Normaal papier/Dik papier/Foto/Kleine documenten (zoals indexkaarten)/Speciale papiersoorten (zoals calqueerpapier, transparanten, etc.
0CSC-0F9 Scangebied De grijze gebieden in de onderstaande tabel geven het scangedeelte van het document aan. Zorg ervoor dat de tekst en afbeeldingen in uw documenten binnen het grijze gebied passen. Het scangedeelte verschilt naargelang de gebruikte functie en de plaats van de documenten (de documentinvoer of de glasplaat). Glasplaat Documentinvoer Kopiëren OPMERKING: OPMERKING: Het scangebied voor kopiëren kan verschillen van het Afdrukgebied afdrukgebied.
0CSC-0FA Papier Ondersteunde papierformaten Hieronder ziet u een overzicht van de papierformaten die u in de papierlade, de sleuf voor handmatige invoer en de optionele papierladen kunt laden.
Envelope COM10 (104,7 x 241,3 mm) Envelope Monarch (98,4 x 190,5 mm) Envelope C5 (162 x 229 mm) Envelope DL (110 x 220 mm) Aangepast papierformaat *2 *1 Het apparaat kan ontvangen faxdocumenten afdrukken. *2 U kunt aangepast papier met een breedte van 83 tot 215,9 mm en een lengte van 127 tot 355,6 mm in de papierlade of de sleuf voor handmatige invoer plaatsen. OPMERKING Het papierformaat van het apparaat is standaard ingesteld op Letter.
Normaal papier 60 tot 90 g/m² 150 vellen 1 vel 85 tot 120 g/m² 120 vellen 1 vel 121 tot 163 g/m² 100 vellen 1 vel Gerecycled papier 60 tot 74 g/m² 150 vellen 1 vel Gekleurd papier 60 tot 74 g/m² 150 vellen 1 vel Dik papier 100 tot 110 g/m² 111 tot 130 g/m² 100 vellen Gecoat papier 1 vel 131 tot 160 g/m² 161 tot 220 g/m² - Transparanten*1 50 vellen 1 vel Etiketten 50 vellen 1 vel Indexkaart 15 vellen 1 vel Enveloppen 10 vellen 1 vel *1 Gebruik speciale transparanten voor l
0CSC-0FE Specificaties van de kopieerfunctie Tekst/Foto/Kaart (snel) (kleur) 300 x 300 dpi Scanresolutie Tekst/Foto/Kaart, Tekst/Foto/Kaart (snel) (Z/W) 300 x 600 dpi Tekst/Foto/Kaart (Kwaliteit), gedrukte afbeelding, tekst 600 x 600 dpi Uitvoerresolutie 600 x 600 dpi Zoompercentage 100% 1:1, Max. 400%, 200%, 141% A5->A4, 70% A4->A5, 50%, Min.
0CSC-0FF Specificaties van de faxfunctie (Alleen de MF8580Cdw / MF8550Cdn / MF8280Cw) Gebruikte lijn Openbaar telefoonnetwerk (PSTN) *1 Communicatiemodus Super G3, G3 Compressiemethode MH, MR, MMR, JBIG Modemsnelheid Super G3: 33,6 kbps, G3: 14,4 kbps Automatische terugval Transmissiesnelheid Ongeveer 3 seconden/pagina*2 (ECM-JBIG, verzending vanuit het geheugen bij 33,6 Kbps) Verzenden vanuit geheugen/ontvangen in geheugen Max.
0CSC-0FH Specificaties van de scannerfunctie Type Kleurenscanner Maximaal scanformaat Glasplaat: max. 216 x 297 mm Invoer: maximaal 216 x 356 mm Scanresolutie Optische resolutie Glasplaat: maximaal 600 x 600 dpi Invoer: maximaal 300 x 300 dpi Softwarematige resolutie 9.600 x 9.600 dpi Scansnelheid*1 (A4, 300 x 600 dpi) Kleur: 10 vellen/minuut Zwart-wit: 20 vellen/minuut Hostinterface 100BASE-TX 10BASE-T Hi-Speed USB USB IEEE 802.
0CSC-0FJ Specificaties van de afdrukfunctie Afdrukmethode Indirect elektrostatisch systeem (fixeren op verzoek) Papiercapaciteit MF8580Cdw / MF8550Cdn / MF8540Cdn Sleuf voor handmatige invoer: ongeveer 50 vellen (60 tot 90 g/m²) Papierlade: ongeveer 250 vellen (60 tot 90 g/m²) Cassette Feeding Unit-V1 (optioneel): ongeveer 250 vellen (60 tot 90 g/m²) MF8280Cw / MF8230Cn Sleuf voor handmatige invoer: 1 vel Papierlade: ongeveer 150 vellen (60 tot 90 g/m²) Capaciteit opvangblad *1 (een stapel nieuw papier
0CSC-0FK Specificaties voor het verzenden van e-mail (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Communicatieprotocol *1 SMTP Bestandsindeling PDF (Compact), PDF Zwart-wit PDF: 300 dpi (MMR-compressie) PDF (Compact): tekst 300 dpi, achtergrond 150 dpi Resolutie Kleur PDF: 200 dpi (JPEG-compressie) PDF (Compact): tekst 300 dpi, achtergrond 150 dpi Besturingssystemen Windows XP/Vista/7/8/Server 2003/Server 2008/Server 2012 Solaris 2.6 of hoger (met Samba 2.2 of hoger) Mac OS X Red Hat Linux 7.
0CSC-0FL Specificaties voor het scannen naar gedeelde mappen (Alleen de MF8580Cdw / MF8550Cdn / MF8540Cdn) Communicatieprotocol SMB (TCP/IP) Bestandsindeling PDF (Compact), PDF, JPEG, TIFF Zwart-wit JPEG: 300 dpi TIFF: 300 dpi (MMR-compressie) PDF: 300 dpi (MMR-compressie) PDF (Compact): tekst 300 dpi, achtergrond 150 dpi Resolutie Kleur JPEG: 300 dpi TIFF: 300 dpi (JPEG-compressie) PDF: 200 dpi (JPEG-compressie) PDF (Compact): tekst 300 dpi, achtergrond 150 dpi Besturingssystemen Windows XP/Vista/7
0CSC-0H0 De e-Handleiding gebruiken De e-Handleiding is een handleiding die u op uw computer kunt bekijken en die alle functies van het apparaat beschrijft. U kunt zoeken op basis van uw bedoeld gebruik of een trefwoord invoeren om snel de pagina te vinden die u zoekt. U kunt de e-Handleiding gebruiken De e-Handleiding door deze op uw computer te installeren of door de e-Handleiding rechtstreeks vanaf de cd-rom te starten.
0CSC-0H3 De e-Handleiding installeren Installeer de e-Handleiding op uw computer vanaf de cd-rom die bij de machine is geleverd. Het label van de cd met handleidingen kan verschillen afhankelijk van het land of het model van de machine. De Multi-lingual User Manual CD (cd met meertalige gebruikershandleiding) gebruiken 1 Plaats de Multi-lingual User Manual CD (cd met meertalige gebruikershandleiding) in het cd-rom-station van uw computer.
3 Selecteer [USB-verbinding] en klik op [Volgende]. OPMERKING: Selecteer [USB-verbinding] zelfs wanneer u verbinding maakt via een netwerk. 4 Schakel alle selectievakjes uit behalve dat voor [Handleidingen] en klik op [Installeren]. 5 Lees de licentieovereenkomst en klik op [Ja] om akkoord te gaan.
De installatie wordt gestart. U moet nu even wachten. Deze bewerking kan enige tijd duren. 6 Klik op [Afsluiten]. 7 Klik op [Volgende] [Afsluiten].
De e-Handleiding weergeven Dubbelklik op het pictogram [e-Handleiding MF8500C_MF8200C Series] op het bureaublad. Schakel Java-script in uw browser in voordat u de e-Handleiding gebruikt. OPMERKING Als er een beveiligingswaarschuwing wordt weergegeven Klik op [Inhoud weergeven]. TIP om de e-Handleiding rechtstreeks vanaf de cd-rom te openen Afhankelijk van het besturingssysteem dat u gebruikt, kan er een beveiligingswaarschuwing worden weergegeven.
De User Software CD (cd met gebruikerssoftware) gebruiken 1 Plaats de User Software CD (cd met gebruikerssoftware) in het cd-rom-station van uw computer. Selecteer een taal en klik op [OK] als dat wordt gevraagd. Als het scherm [Cd-installatie] niet verschijnt, haalt u de cd uit het station en plaatst u deze opnieuw. Zie ook Het scherm [Installatie met cd-rom] of [Select Language] weergeven. 2 Klik op [Handleidingen]. 3 Klik op [e-Handleiding].
0CSC-0H4 De e-Handleiding verwijderen U kunt de e-Handleiding desgewenst van de computer verwijderen. Het label van de cd met handleidingen kan verschillen afhankelijk van het land of het model van de machine. De Multi-lingual User Manual CD (cd met meertalige gebruikershandleiding) gebruiken 1 Open Windows Verkenner. Windows XP/Vista/7/Server 2003/Server 2008 Selecteer in het menu [Start] [All Programs] (Alle programma's) (of [Programs] (Programma's)) [Windows Explorer] (Windows Verkenner).
4 Klik op [Verwijderen]. De e-Handleiding wordt verwijderd. U moet nu even wachten. Deze bewerking kan enige tijd duren. 5 Klik op [Afsluiten]. 6 Klik op [Terug] [Afsluiten].
㻢㻢㻠㻌㻛㻌㻢㻤㻠
0CSC-0H5 Lay-out van de e-Handleiding De e-Handleiding is opgesplitst in verschillende schermen en de inhoud van elk scherm varieert. Bovenste pagina Deze pagina wordt weergegeven als u de e-Handleiding start. Canon Klik hierop om naar de beginpagina van de handleiding te gaan. Tabblad [Inhoudsopgave]/Tabblad [Zoeken] Klik hierop om te schakelen tussen de inhoudsopgave en de zoekfunctie. Inhoudsopgave De hoofdstuktitels worden weergegeven ( ).
[Siteoverzicht] Klik hierop om alle onderwerpen van de e-Handleiding weer te geven. [Help] Klik hierop om informatie weer te geven over hoe u de e-Handleiding kunt bekijken, hoe u een zoekopdracht uitvoert en andere informatie. [Afdrukken] Klik hierop om de weergegeven inhoud af te drukken. Handige functies Verschillende praktijkvoorbeelden om het apparaat zo efficiënt mogelijk te gebruiken. Klik op / / / om praktijkvoorbeelden op categorie weer te geven.
[Inhoudsopgave] De hoofdstukpictogrammen en -titels worden weergegeven. / Het tabblad [Inhoudsopgave] kan breder of smaller worden gemaakt. [Alles uitvouwen]/[Alles samenvouwen] Klik op [Alles uitvouwen] om alle subgedeelten van alle onderwerpen weer te geven. Klik op [Alles samenvouwen] om alle subgedeelten van alle onderwerpen te sluiten. Hoofdstukpictogrammen Klik op een hoofdstukpictogram om naar het begin van het overeenkomstige hoofdstuk te navigeren.
[Voer hier trefwoord(en) in] Typ hier een of meer trefwoorden en klik op om de zoekresultaten weer te geven in het zoekvenster ( ). [Zoekopties] Klik hierop om zoekopties in te stellen zoals het bereik van de zoekopdracht en jokertekens. Om de opties weer te geven, klikt u op deze knop wanneer die grijs is. Om de opties te verbergen, klikt u op deze knop wanneer die oranje is. Zoekbereik selecteren Hier kunt u het zoekbereik instellen.
Hoofdstukpictogrammen Klik hierop om naar het onderwerp van het geselecteerde hoofdstuk te gaan. Titel (Onderwerp) Geeft titels en onderwerpen weer. Klik op een titel of onderwerp om naar de pagina te gaan. Klik hierop om naar het begin van de pagina te gaan. / Klik hierop om naar het vorige of volgende hoofdstuk te gaan.
0CSC-0HC De e-Handleiding raadplegen Markeringen Waarschuwingen met betrekking tot veiligheid, beperkingen en waarschuwingen met betrekking tot de bediening van het apparaat, nuttige tips en andere informatie worden weergegeven met behulp van de onderstaande markeringen. Geeft een waarschuwing aan voor handelingen die lichamelijk letsel tot gevolg kunnen hebben als de handelingen niet juist worden uitgevoerd. Let altijd goed op deze waarschuwingen zodat u het apparaat veilig gebruikt.
Tenzij anders aangegeven, zijn de displays waarnaar wordt verwezen in de e-Handleiding afkomstig van de MF8580Cdw. Afhankelijk van het besturingssysteem dat u gebruikt, kan de weergave van de displays in deze handleiding iets afwijken van de werkelijke displays. De weergave van stuurprogramma's en software kan ook variëren afhankelijk van hun versie. Illustraties in deze handleiding Tenzij anders aangegeven, verwijzen de gebruikte illustraties in de e-Handleiding naar de MF8580Cdw.
0CSC-0HE Overige In deze bijlage worden basisbewerkingen van Windows beschreven. De bijlage bevat verder disclaimers, auteursrechtinformatie en andere belangrijke informatie.
0CSC-0HF Basisbewerkingen in Windows Het onderdeel [Computer] of [My Computer] (Deze computer) weergeven Windows XP Professional/Server 2003 [Start] selecteer [My Computer] (Deze computer). Windows Vista/7/Server 2008 R2 [Start] selecteer [Computer]. Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm selecteer [File Explorer] (Verkenner) [Computer].
Het scherm [Installatie met cd-rom] of [Select Language] weergeven Als het scherm [Installatie met cd-rom] of [Select Language] niet automatisch wordt weergegeven nadat u de cd hebt geplaatst, volgt u de onderstaande procedure. De stationsnaam van de cd-rom wordt aangeduid met 'D:' in deze handleiding. De stationsletter van het cdrom-station kan verschillen afhankelijk van de computer die u gebruikt. Windows XP/Server 2003 1 [Start] 2 Typ "D:\Minst.
De bitarchitectuur controleren Als u niet zeker weet of op uw computer de 32-bits of 64-bits versie van Windows Vista/7/8/Server 2008/Server 2012 wordt uitgevoerd, volgt u de onderstaande procedure. 1 Open het onderdeel [Control Panel] (Configuratiescherm). Windows Vista/7/Server 2008 selecteer [Control Panel] (Configuratiescherm) [Start] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm 2 selecteer [Control Panel] (Configuratiescherm).
4 Klik op [Change] (Wijzigen) (of [Properties] (Eigenschappen)). Windows Vista/7/8/Server 2008/Server 2012 1 Open het onderdeel [Control Panel] (Configuratiescherm). Windows Vista/7/Server 2008 [Start] selecteer [Control Panel] (Configuratiescherm) Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm 2 selecteer [Control Panel] (Configuratiescherm). Open het onderdeel [Systeem].
㻢㻣㻣㻌㻛㻌㻢㻤㻠
0CSC-0HH Kennisgeving Modelnamen MF8580Cdw (F164802) MF8550Cdn (F164802) MF8540Cdn (F164800) MF8280Cw (F164702) MF8230Cn (F164700) Services en software van derden Third Party Software R&TTE-richtlijn Dit apparaat (F164802/F164702) voldoet aan de essentiële vereisten van de EU-richtlijn 1999/5/EC en is bruikbaar in de EU. (Alleen voor modellen met faxfunctie.) (Alleen voor Europa) Canon Inc. / Canon Europa N.V.
LASERPRODUKT KLASS 1 Het gebruik van bedieningen, het maken van aanpassingen, of het uitvoeren van procedures anders dan omschreven in de handleidingen voor dit apparaat, kan leiden tot gevaarlijke blootstelling aan straling.
Dansk [Danish] Undertegnede CANON INC. erklærer herved, at FM48944 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt CANON INC., dass sich das Gerät FM48944 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab CANON INC. seadme FM48944 vastavust direktiivi 1999/5/EÜ olulistele nõuetele ja muudele asjakohastele sätetele.
[Czech] º Ê Ê Ë ¼ ¼¾ Ý Ê Ý Ë IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.* Poznámky týkající se použití tohoto produktu. Ö Dansk [Danish] * Dette produkt må anvendes i AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.* Bemærkninger for anvendelse af dette produkt.
[Dutch] product. Frankrijk: dit product kan niet buiten worden gebruikt. Suomi [Finnish] * Laitetta voidaan käyttää seuraavassa maassa AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.* Huomautuksia tämän tuotteen käytöstä. Ranska: Tuotetta ei saa käyttää ulkoilmassa.
Copyright CANON INC. 2014 Niets uit dit document mag worden vermenigvuldigd, verzonden, getranscribeerd, opgeslagen in een zoeksysteem of vertaald in een taal of computertaal in welke vorm of met welke middelen dan ook, hetzij elektronisch, mechanisch, magnetisch, optisch, chemisch, handmatig of anderszins, zonder voorafgaande schriftelijke toestemming van Canon Inc. Handelsmerken Canon en het Canon-logo zijn gedeponeerde handelsmerken van Canon Inc.
0CSC-0HU Contact opnemen CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC CANON SINGAPORE PTE LTD.
㻝㻌㻛㻌㻣㻠
Voordat u het stuurprogramma gebruikt 3 Informatie over de stuurprogramma's en de software 4 Ondersteunde besturingssystemen 5 Selecteren welk stuurprogramma moet worden geïnstalleerd 6 MF-stuurprogramma's en MF Toolbox installeren 8 Installeren met [Eenvoudige installatie] (voor Windows) 9 Installeren met [Aangepaste installatie] (voor Windows) 17 De software installeren (voor Macintosh) 28 USB-kabelverbinding (alleen als een USB-verbinding wordt gebruikt) 32 De installatieresultaten controleren (voor Wind
0CK3-000 Voordat u het stuurprogramma gebruikt Voordat u het stuurprogramma gebruikt Lees dit hoofdstuk voordat u software zoals de MF-stuurprogramma's installeert.
0CK3-001 Informatie over de stuurprogramma's en de software MF-stuurprogramma's Printerstuurprogramma U kunt vanuit een toepassing afdrukken op het apparaat wanneer het printerstuurprogramma op uw computer is geïnstalleerd. Faxstuurprogramma *1 Als u het faxstuurprogramma op uw computer installeert, kunt u "Afdrukken" selecteren in een toepassing, het Canon-faxstuurprogramma selecteren als printer en de uitvoerbestemming en -opties opgeven.
0CK3-002 Ondersteunde besturingssystemen : Ondersteund : Niet ondersteund Windows XP Windows Vista/7/8 Printerstuurprogramma (UFRII LT) Windows Server 2003 *1 Printerstuurprogramma (UFRII LT (XPS)) Windows Server 2008 *1 Windows Server 2008 R2/Server 2012 *1 *1 Printerstuurprogramma (PCL5) *2 *1 *1 *1 Printerstuurprogramma (PCL6) *2 *1 *1 *1 Faxstuurprogramma *2 *1 *1 *1 Scannerstuurprogramma Network Scan Utility *1 *1 MF Toolbox Presto! PageManager *1 Alleen ondersteund via een n
0CK3-003 Selecteren welk stuurprogramma moet worden geïnstalleerd Selecteer na het instellen van de verbindingsmethode voor het apparaat welk stuurprogramma moet worden geïnstalleerd. 1 Druk op . 2 Druk op [ ] of [ ] om te selecteren en druk vervolgens op . ] of [ ] om te selecteren en druk vervolgens op .
Opties voor paginabeschrijvingstalen Netwerk Fax UFRII LT UFRII LT (XPS) PCL5 PCL6 USB UFRII LT UFRII LT (XPS) PCL5 PCL6 6 Start de machine opnieuw op. De wijzigingen worden pas van kracht nadat u de machine opnieuw hebt opgestart. Schakel de machine uit en wacht minimaal 10 seconden voordat u deze weer inschakelt.
0CK3-004 MF-stuurprogramma's en MF Toolbox installeren MF-stuurprogramma's en MF Toolbox installeren Installeer de software om het apparaat te gebruiken.
0CK3-005 Installeren met [Eenvoudige installatie] (voor Windows) 1 Plaats de User Software CD (cd met gebruikerssoftware) in de sleuf op uw computer. 2 Klik op [Eenvoudige installatie]. Het hangt af van uw land of regio welke opties worden weergegeven. Als het bovenstaande scherm voor installatie vanaf cd niet wordt weergegeven: Windows XP en Server 2003 1. Selecteer [Uitvoeren] in het menu [Start]. 2. Voer "D:\MInst.exe" in en klik vervolgens op [OK]. Windows Vista, 7 en Server 2008 1.
Als het scherm voor taalselectie wordt weergegeven vóór het installatiescherm van de cd-rom: Selecteer de taal en klik op [OK]. 3 Als het volgende scherm wordt weergegeven, selecteert u het type computerverbinding. Voor een USB-verbinding: Selecteer [USB-verbinding] en klik op [Volgende]. Voor een netwerkverbinding: Selecteer [Netwerkverbinding] en klik op [Volgende]. OPMERKINGEN Windows Server 2003/Server 2008/Server 2012 Dit scherm wordt niet weergegeven. Ga naar de volgende procedure.
5 Lees de licentieovereenkomst en klik op [Ja]. 6 Klik op [Volgende].
Het volgende scherm wordt weergegeven. Klik op [Ja]. Voor een USB-verbinding: Ga naar stap 9. Voor een netwerkverbinding: Ga naar stap 7. 7 Selecteer het apparaat dat u wilt installeren. (1) Selecteer het apparaat. (2) Klik op [Volgende]. Als er geen apparaten worden weergegeven in [Apparatenlijst]: Voer de volgende procedure uit. 1. Controleer het volgende. De computer en het apparaat zijn aangesloten via het netwerk. Het apparaat is ingeschakeld. Het IP-adres is juist ingesteld.
Hierdoor kan het installatieprogramma zoeken naar dit apparaat. e-Handleiding -> "IPv4-adres instellen" 3. Klik op [OK]. 8 De installatie begint wanneer u op [Starten] klikt. 9 Klik op [Afsluiten]. Voor een netwerkverbinding: Voor een USB-verbinding: Vervolgens wordt de installatie van MF Toolbox gestart. In Windows Server 2003/2008/2012 wordt MF Toolbox niet geïnstalleerd. Ga naar stap 13.
10 Klik op [Starten]. 11 Klik op [Afsluiten]. 12 Als het volgende scherm wordt weergegeven, leest u de informatie en selecteert u [Ik ga akkoord] of [Ik ga niet akkoord]. Klik daarna op [Volgende].
Als u [Ik ga akkoord] selecteert: Product Extended Survey Program (het programma voor het verzamelen van feedback over de machine) wordt geïnstalleerd. Product Extended Survey Program is een programma waarmee gedurende maximaal tien jaar elke maand gebruiksgegevens van deze machine naar Canon worden verstuurd. Er worden geen andere gegevens verstuurd, dus ook geen persoonlijke gegevens. U kunt Product Extended Survey Program ook verwijderen.
Wacht in het geval van een USB-verbinding tot de computer opnieuw wordt opgestart. "USB-kabelverbinding (alleen als een USB-verbinding wordt gebruikt)" Controleer de installatieresultaten in het geval van een netwerkverbinding.
0CK3-006 Installeren met [Aangepaste installatie] (voor Windows) 1 Plaats de User Software CD (cd met gebruikerssoftware) in de sleuf op uw computer. 2 Klik op [Aangepaste installatie]. Het hangt af van uw land of regio welke opties worden weergegeven. Als het bovenstaande scherm voor installatie vanaf cd niet wordt weergegeven: Windows XP en Server 2003 1. Selecteer [Uitvoeren] in het menu [Start]. 2. Voer "D:\MInst.exe" in en klik vervolgens op [OK]. Windows Vista, 7 en Server 2008 1.
Als het scherm voor taalselectie wordt weergegeven vóór het installatiescherm van de cd-rom: Selecteer de taal en klik op [OK]. 3 Als het volgende scherm wordt weergegeven, selecteert u het type computerverbinding. Voor een USB-verbinding: Selecteer [USB-verbinding] en klik op [Volgende]. Voor een netwerkverbinding: Selecteer [Netwerkverbinding] en klik op [Volgende]. OPMERKINGEN Windows Server 2003/Server 2008/Server 2012: Dit scherm wordt niet weergegeven. Ga naar de volgende procedure.
Het hangt af van uw land of regio welke opties worden weergegeven. 5 Lees de licentieovereenkomst en klik op [Ja]. 6 Klik op [Volgende].
Het volgende scherm wordt weergegeven. Klik op [Ja]. Voor een USB-verbinding: Ga naar stap 13. Voor een netwerkverbinding: Ga naar stap 7. 7 Selecteer het apparaat dat u wilt installeren. (1) Selecteer het apparaat. (2) Klik op [Volgende]. Als er geen apparaten worden weergegeven in [Apparatenlijst]: Voer de volgende procedure uit.
1. Controleer het volgende. De computer en het apparaat zijn aangesloten via het netwerk. Het apparaat is ingeschakeld. Het IP-adres is juist ingesteld. De computer en het apparaat bevinden zich in hetzelfde subnet. Beveiligingssoftware is gesloten. 2. Klik op [Apparatenlijst bijwerken]. Voer de volgende procedure uit als niet alle apparaten worden weergegeven nadat u de vorige procedure hebt uitgevoerd. 1. Klik op [Zoeken op IP-adres]. 2. Voer het IP-adres in van het apparaat dat u wilt installeren.
9 Stel de printer- of faxgegevens in. (1) Stel elke optie naar wens in. (2) Klik op [Volgende]. Printergegevens *1 Faxgegevens*2 *1 Wordt weergegeven als u in stap 8 [Printer] hebt geselecteerd. *2 Wordt weergegeven als u in stap 8 [Fax (voor ondersteunde modellen)] hebt geselecteerd. [Printernaam] Voer een naam in als u de printer- of faxnaam wilt wijzigen. [Naam faxapparaat] [Gebruiken als gedeelde printer] Schakel dit selectievakje in als u de printer of fax wilt delen.
Windows Server 2003 (waarop geen servicepack is geïnstalleerd) Als u de software downloadt en installeert op een van de bovengenoemde 32-bits besturingssystemen kunt u de software mogelijk niet installeren en kunt u het dialoogvenster voor afdrukvoorkeuren mogelijk niet openen. Als een van de volgende 32-bits besturingssystemen wordt uitgevoerd op een computer waarop de installatie plaatsvindt, kan het aanvullende stuurprogramma voor een 64-bits besturingssysteem niet worden geïnstalleerd.
(1) Schakel het selectievakje in als u een testpagina wilt afdrukken. (2) Klik op [Volgende]. Dit scherm wordt alleen weergegeven wanneer u het printer- en faxstuurprogramma installeert. 13 Klik op [Afsluiten]. Voor een netwerkverbinding: Voor een USB-verbinding: Vervolgens wordt de installatie van MF Toolbox gestart. In de volgende gevallen wordt MF Toolbox niet geïnstalleerd. Ga naar stap 17.
De schermen voor het opgeven van de locatie waar MF Toolbox wordt geïnstalleerd en de plaats waar het startmenu wordt toegevoegd, worden weergegeven. Geef de instellingen in de schermen op en klik op [Volgende]. Klik op [Starten] in het weergegeven scherm. 15 Klik op [Afsluiten]. De software waarvoor u in stap 4 het selectievakje hebt ingeschakeld, wordt geïnstalleerd. Volg de aanwijzingen op het scherm.
Als u [Ik ga akkoord] selecteert: Product Extended Survey Program (het programma voor het verzamelen van feedback over de machine) wordt geïnstalleerd. Product Extended Survey Program is een programma waarmee gedurende maximaal tien jaar elke maand gebruiksgegevens van deze machine naar Canon worden verstuurd. Er worden geen andere gegevens verstuurd, dus ook geen persoonlijke gegevens. U kunt Product Extended Survey Program ook verwijderen.
Wacht in het geval van een USB-verbinding tot de computer opnieuw wordt opgestart. "USB-kabelverbinding (alleen als een USB-verbinding wordt gebruikt)" Controleer de installatieresultaten in het geval van een netwerkverbinding.
0CK3-007 De software installeren (voor Macintosh) Als u verbinding wilt maken via USB, installeert u eerst de software en sluit u vervolgens de USB-kabel aan. Nadat u de procedures uit dit gedeelte hebt uitgevoerd, gaat u verder met de procedures in "De printer en fax registreren (voor de Macintosh)". Het installatiescherm verschilt per versie van Mac OS X. Sluit eerst alle geopende toepassingen. 1 Plaats de User Software CD (cd met gebruikerssoftware) in het cd-station van uw computer.
4 Lees de licentieovereenkomst en klik op [Continue] (Doorgaan). 5 Klik op [Agree] (Akkoord). 6 Als het volgende scherm wordt weergegeven, klikt u op [Continue] (Doorgaan).
U kunt de map voor de installatie niet wijzigen. 7 Klik op [Install] (Installeren). Er kan een knop worden weergegeven voor het [Change Install Location] (wijzigen van de installatielocatie), maar dit is niet mogelijk. 8 Voer uw [Name] (Naam) en het bijbehorende [Password] (Wachtwoord) in en klik op [OK]. Als u Mac OS X 10.7.x of hoger gebruikt, klikt u op [Install Software] (Software installeren).
9 Als het volgende scherm wordt weergegeven, klikt u op [Close] (Sluiten). Als u een USB-verbinding wilt gebruiken, gaat u verder met "USB-kabelverbinding (alleen als een USB-verbinding wordt gebruikt)". Als u een netwerkverbinding wilt gebruiken, gaat u verder met "De printer en fax registreren (voor de Macintosh)".
0CK3-008 USB-kabelverbinding (alleen als een USB-verbinding wordt gebruikt) 1 Verwijder de beschermkap van de USB-poort aan de achterzijde van het apparaat. Trek aan het koordje om het klepje te verwijderen (zie hieronder). 2 Sluit de USB-kabel aan. Steek het platte uiteinde (a) in de USB-poort van de computer. Steek het vierkante uiteinde (b) in de USB-poort van het apparaat. Als een dialoogvenster wordt weergegeven: Volg de aanwijzingen op het scherm om de installatie te voltooien.
0CK3-009 De installatieresultaten controleren (voor Windows) Controleer of de MF-stuurprogramma's, MF Toolbox en de e-Handleiding goed zijn geïnstalleerd. Controleer of de volgende pictogrammen worden weergegeven voor de geïnstalleerde toepassingen. OPMERKINGEN Pictogrammen die worden weergegeven: Afhankelijk van het besturingssysteem worden mogelijk afzonderlijke pictogrammen voor elk stuurprogramma of slechts één pictogram weergegeven.
0CK3-00A De printer en fax registreren (voor de Macintosh) Als u wilt afdrukken of faxen vanaf een Macintosh, moet u de machine registreren op de Macintosh. De registratiemethode wordt bepaald door de gebruikte verbinding. Selecteer de verbinding die het meest geschikt is voor uw omgeving. Als u wilt scannen via een netwerkverbinding, moet u de scanner registreren in MF Toolbox. Raadpleeg voor meer informatie de Canon Scanner Stuurprogramma Handleiding.
4 Selecteer [Selecteer printersoftware] in de lijst [Druk af met]. 5 Selecteer in de lijst een stuurprogramma dat geschikt is voor deze machine en klik vervolgens op [OK]. Als u Mac OS X 10.5.x gebruikt, hoeft u niet op [OK] te klikken. 6 Klik op [Voeg toe]. 7 Als het volgende scherm verschijnt, geeft u desgewenst nog instellingen op en klikt u vervolgens op [Ga door] of [OK].
8 Controleer of de machine wordt weergegeven in het dialoogvenster [Printer en fax] of [Afdrukken en scannen]. 9 Sluit het dialoogvenster. TCP/IP-verbinding Registreer de printer en de fax met de onderstaande procedure. Het faxstuurprogramma kan niet worden gebruikt in een IPv6-omgeving. 1 Open [Systeemvoorkeuren] en klik op [Printer en fax] of [Afdrukken en scannen]. 2 Klik op het pictogram [+].
3 Klik op [IP] en selecteer een afdrukprotocol bij [Protocol]. 4 Typ het IP-adres van de machine in het vak [Adres] en selecteer vervolgens [Selecteer printersoftware] bij [Druk af met].
5 Selecteer in de lijst een stuurprogramma dat geschikt is voor deze machine en klik vervolgens op [OK]. Als u Mac OS X 10.5.x gebruikt, hoeft u niet op [OK] te klikken. 6 Klik op [Voeg toe]. 7 Als het volgende scherm verschijnt, geeft u desgewenst nog instellingen op en klikt u vervolgens op [Ga door] of [OK]. 8 Controleer of de machine wordt weergegeven in het dialoogvenster [Printer en fax] of [Afdrukken en scannen].
9 Sluit het dialoogvenster. USB-verbinding Registreer de printer en de fax met de onderstaande procedure. 1 Open [Systeemvoorkeuren] en klik op [Printer en fax] of [Afdrukken en scannen]. 2 Klik op het pictogram [+].
3 Klik op [Standaard] en selecteer een printer waarbij [USB] wordt weergegeven in de kolom [Soort] of [Verbinding]. 4 Selecteer [Selecteer printersoftware] in de lijst [Druk af met]. 5 Selecteer in de lijst een stuurprogramma dat geschikt is voor deze machine en klik vervolgens op [OK]. Als u Mac OS X 10.5.x gebruikt, hoeft u niet op [OK] te klikken. 6 Klik op [Voeg toe]. 7 Als het volgende scherm verschijnt, geeft u desgewenst nog instellingen op en klikt u vervolgens op [Ga door] of [OK].
8 Controleer of de machine wordt weergegeven in het dialoogvenster [Printer en fax] of [Afdrukken en scannen]. 9 Sluit het dialoogvenster.
0CK3-00C De nieuwste stuurprogramma's installeren die zijn gedownload van de website van Canon In dit gedeelte wordt kort de procedure beschreven voor het installeren van de stuurprogramma's/software die u hebt gedownload van de website van Canon. De instructies voor het downloaden van stuurprogramma's/software kunt u vinden op de downloadpagina van de website van Canon. 1 Pak het gedownloade bestand uit. 2 Open de map [DRIVERS] en dubbelklik op [Setup] of [Setup.
0CK3-00E MF-stuurprogramma's op het WSD-netwerk installeren (voor Windows) MF-stuurprogramma's op het WSD-netwerk installeren (voor Windows) Met het WSD-protocol (Web Services on Devices) kunt u afdrukken vanaf een computer waarop Windows Vista/7/8/Server 2008/Server 2012 wordt gebruikt. Als u WSD wilt gebruiken, volgt u de procedures in zowel "MF-stuurprogramma's installeren" als "WSD instellen". BELANGRIJK WSD in- of uitschakelen: Gebruik het bedieningspaneel op het apparaat.
0CK3-00F MF-stuurprogramma's installeren 1 Open de printermap. Windows Vista: Selecteer [Configuratiescherm] in het menu [Start] en klik vervolgens op [Printer]. Voor Windows 7/Server 2008 Selecteer in het menu [Start] de optie [Apparaten en printers]. Voor Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm en kies [Configuratiescherm] en vervolgens [Apparaten en printers weergeven]. 2 Klik op [Een printer toevoegen]. 3 Klik op [Een lokale printer toevoegen].
4 Controleer of [LPT1: (Printerpoort)] wordt weergegeven bij [Bestaande poort gebruiken] en klik op [Volgende]. 5 Klik op [Bladeren]. 6 Plaats de User Software CD (cd met gebruikerssoftware) in de sleuf op uw computer. Als het volgende scherm wordt weergegeven, klikt u op [Afsluiten].
Het hangt af van uw land of regio welke opties worden weergegeven. Als [Automatisch afspelen] wordt weergegeven: Klik op [ ] om het dialoogvenster te sluiten. 7 Klik op [Bladeren]. 8 Open de map waarin de bestanden van de printerstuurprogramma's zijn opgeslagen. Voor 32-bits versies: Open [DRIVERS] -> [nl_nl] -> [32bit] -> [Driver] op de cd en klik op [Openen]. Voor 64-bits versies: Open [DRIVERS] -> [nl_nl] -> [x64] -> [Driver] op de cd en klik op [Openen].
Als u niet zeker weet welk besturingssysteem u op uw computer gebruikt: "De bitarchitectuur controleren (voor Windows)" 9 Klik op [OK]. 10 Selecteer het printerstuurprogramma dat u gebruikt, en klik op [Volgende].
11 Geef de printernaam op. (1) Geef een andere naam op om de standaardprinternaam te wijzigen. Als [Als standaardprinter instellen] wordt weergegeven, kunt u opgeven of het apparaat als standaardprinter moet worden gekozen (Windows Vista/Server 2008). (2) Klik op [Volgende]. De installatie wordt gestart. Wacht tot het volgende scherm sluit.
Wanneer [Gebruikersaccountbeheer] wordt weergegeven: Klik op [Ja] of [Doorgaan]. 12 Selecteer [Deze printer niet delen] en klik op [Volgende]. Als u het apparaat als gedeelde printer wilt instellen, configureert u de desbetreffende instellingen nadat u de procedure in "WSD instellen" hebt uitgevoerd. 13 Klik op [Voltooien]. Als [Als standaardprinter instellen] wordt weergegeven, kunt u opgeven of het apparaat als standaardprinter moet worden gekozen (Windows 7/8/Server 2008 R2/Server 2012).
Werp de cd-rom uit als het volgende scherm wordt weergegeven. Het pictogram wordt toegevoegd aan de printermap.
0CK3-00H WSD instellen 1 Open de netwerkmap. Voor Windows Vista/Server 2008: Selecteer [Netwerk] in het menu [Start]. Voor Windows 7/Server 2008 R2: Selecteer [Computer] in het menu [Start] en klik op [Netwerk]. Voor Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm, kies [Verkenner] en klik op [Netwerk]. 2 Klik met de rechtermuisknop op het pictogram van het apparaat en selecteer [Verwijderen] in het snelmenu. Het pictogram wordt toegevoegd aan de printermap.
Als u het pictogram dat in stap 13 van "MF-stuurprogramma's installeren" is toegevoegd, niet nodig hebt, verwijdert u het door de volgende stappen uit te voeren. (1) Klik met de rechtermuisknop op het pictogram en selecteer [Apparaat verwijderen] of [Verwijderen] in het snelmenu. (2) Klik op [Ja]. (3) Klik op [Ja] of [Doorgaan] wanneer het dialoogvenster [Gebruikersaccountbeheer] wordt weergegeven.
0CK3-00J De software verwijderen De software verwijderen Als u de stuurprogramma's of toepassingen niet nodig hebt, kunt u deze verwijderen door de volgende procedure uit te voeren.
0CK3-00K Het printer-/fax-/scannerstuurprogramma verwijderen (voor Windows) 1 Open [Programma's]. Voor Windows XP: Selecteer [Configuratiescherm] in het menu [Start] en dubbelklik vervolgens op [Software]. Voor Windows Vista/7/Server 2003/Server 2008: 1. Selecteer in het menu [Start] de optie [Configuratiescherm]. 2. Klik op [Een programma verwijderen] of dubbelklik op [Programma's]. Voor Windows 8/Server 2012: Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm en kies [Programma's].
㻡㻡㻌㻛㻌㻣㻠
0CK3-00L MF Toolbox verwijderen (voor Windows) 1 Open [Programma's]. Voor Windows XP: Selecteer [Configuratiescherm] in het menu [Start] en dubbelklik vervolgens op [Software]. Voor Windows Vista/7/Server 2003/Server 2008: 1. Selecteer in het menu [Start] de optie [Configuratiescherm]. 2. Klik op [Een programma verwijderen] of dubbelklik op [Programma's]. Voor Windows 8/Server 2012: Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm en kies [Programma's]. 2 Selecteer [Canon MF Toolbox 4.
㻡㻣㻌㻛㻌㻣㻠
0CK3-00R De stuurprogramma's voor het WSD-apparaat verwijderen (voor Windows) 1 Plaats de User Software CD (cd met gebruikerssoftware). Als het volgende scherm wordt weergegeven, klikt u op [Afsluiten]. Het hangt af van uw land of regio welke opties worden weergegeven. Als [Automatisch afspelen] wordt weergegeven: klik op [ ] om het dialoogvenster te sluiten. 2 Open de map op de cd met het verwijderprogramma.
Wanneer [Gebruikersaccountbeheer] wordt weergegeven Klik op [Ja] of [Doorgaan]. 4 Klik op de knop [Verwijderen]. 5 Klik op [Ja]. 6 Klik op [Afsluiten].
7 Open Windows Verkenner en klik op [Netwerk]. 8 Klik met de rechtermuisknop op het pictogram van het apparaat en kies [Verwijderen] in het snelmenu. Wanneer [Gebruikersaccountbeheer] wordt weergegeven Klik op [Ja] of [Doorgaan]. Het pictogram van het apparaat wordt verwijderd uit de printermap en de procedure is voltooid.
0CK3-00S Programma voor het verzamelen van feedback over de machine verwijderen (voor Windows) 1 Open [Programma's]. Voor Windows XP: Selecteer [Configuratiescherm] in het menu [Start] en dubbelklik vervolgens op [Software]. Voor Windows Vista/7: 1. Selecteer in het menu [Start] de optie [Configuratiescherm]. 2. Klik op [Een programma verwijderen] of dubbelklik op [Programma's]. Voor Windows 8: Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm en kies [Programma's].
0CK3-00U De software verwijderen (voor Macintosh) 1 Als de machine via een USB-kabel is verbonden met een computer, koppelt u de USB-kabel los. Als u het scannerstuurprogramma of MF Toolbox wilt verwijderen, gaat u verder met stap 4. 2 Open [Systeemvoorkeuren] en klik op [Printer en fax] of [Afdrukken en scannen]. 3 Selecteer het apparaat en klik op het pictogram [-]. 4 Klik in de menubalk op [Ga] -> [Ga naar map].
/Bibliotheek/Printers/Canon/ CUPS_MF_Printer /Bibliotheek/Printers/PPDs/Contents/Resources/ CNPZBxxxZB.ppd.gz (xxx kan per model verschillen) /Bibliotheek/Printers/Canon/ CUPSFAX /Bibliotheek/Printers/PPDs/Contents/Resources/ CNMCxxxFB.ppd.gz (xxx kan per model verschillen) /Programma's/ Canon MF Utilities /Bibliotheek/Application Support/Canon/ ScanGear MF /Bibliotheek/Application Support/Canon/ WMCLibrary.framework /Bibliotheek/Application Support/Canon/ WMCReb.
0CK3-00W Problemen oplossen Zie de volgende gedeeltes: "Ik kan de software niet installeren." "Toepassingen die zijn geïnstalleerd vanaf de bijgeleverde User Software CD (cd met gebruikerssoftware) worden niet goed geregistreerd in MF Toolbox." "Het verwijderen van de stuurprogramma's duurt te lang (Windows XP)." "De map [Canon] verdwijnt niet uit het menu Start nadat de software is verwijderd.
Ik kan de software niet gebruiken nadat ik een upgrade van het besturingssysteem heb uitgevoerd Verwijder de software voor deze machine voordat u een upgrade van het besturingssysteem op uw computer uitvoert. Zodra de upgrade is voltooid, installeert u de software opnieuw.
0CK3-00X De online-Help gebruiken In de online-Help zijn alle functies van het stuurprogramma en informatie over opties opgenomen. Open de online-Help als u direct een beschrijving van de functies en instellingen wilt weergeven wanneer u het stuurprogramma gebruikt. Voor Windows: (1) Selecteer [Bestand] -> [Afdrukken] in de menubalk van de toepassing. (2) Selecteer de printer bij [Printer selecteren] of [Naam] in het dialoogvenster [Afdrukken]. (3) Klik op [Voorkeuren] of [Eigenschappen].
(3) Wijzig de inhoud in het onderste deelvenster van het dialoogvenster in [Afwerking], [Kwaliteit], [Speciale functies], enzovoort. (4) Klik op . Het Help-scherm weergeven U kunt informatie zoeken door een trefwoord in te voeren.
0CK3-00Y Instellingen van IP-adres bevestigen OPMERKINGEN Als het apparaat niet juist is aangesloten op het netwerk: Het IP-adres wordt weergegeven als "0.0.0.0". Als de instelling voor starttijd is opgegeven: Het IP-aders, het subnetmasker en het gateway-adres worden weergegeven nadat de opgegeven tijd is verstreken.
5 Bekijk de gegevens. 6 Druk op of (Statusmonitor) om het scherm te sluiten. Instellingen van IPv6-adres controleren 1 Druk op of (Statusmonitor). 2 Druk op [ ] of [ ] om te selecteren en druk vervolgens op ] of [ ] om te selecteren en druk vervolgens op 3 Druk op [ 㻢㻥㻌㻛㻌㻣㻠 . .
4 Druk op [ ] of [ ] om de gewenste optie te markeren en druk vervolgens op 5 Bekijk de gegevens. 6 Druk op of (Statusmonitor) om het scherm te sluiten. 㻣㻜㻌㻛㻌㻣㻠 .
0CK3-010 De bitarchitectuur controleren (voor Windows) 1 Open het [Configuratiescherm]. Windows Vista/7/Server 2008: Selecteer [Configuratiescherm] in het menu [Start]. Windows 8/Server 2012: Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm en kies [Configuratiescherm]. 2 Open het onderdeel [Systeem]. Windows Vista/7/8/Server 2008 R2/Server 2012: Klik op [Systeem en onderhoud] of [Systeem en beveiliging] en klik vervolgens op [Systeem]. Windows Server 2008: Klik op [Systeem].
0CK3-011 Disclaimer De informatie in dit document kan zonder voorafgaande kennisgeving worden gewijzigd. CANON INC. BIEDT GEEN ENKELE GARANTIE MET BETREKKING TOT DIT MATERIAAL, UITDRUKKELIJK NOCH STILZWIJGEND, BEHALVE ZOALS HIERIN GEBODEN, INCLUSIEF, EN ZONDER BEPERKINGEN DAARVAN, GARANTIES OP HET GEBIED VAN VERKOOPBAARHEID, GESCHIKTHEID VOOR EEN BEPAALD DOEL OF HET INBREUK MAKEN OP ENIG RECHT. CANON INC.
0CK3-012 Copyright Copyright Canon Inc. 2013. Alle rechten voorbehouden. Niets uit dit document mag worden vermenigvuldigd, verzonden, getranscribeerd, opgeslagen in een zoeksysteem of vertaald in een taal of computertaal in welke vorm of met welke middelen dan ook, hetzij elektronisch, mechanisch, magnetisch, optisch, chemisch, handmatig of anderszins, zonder voorafgaande schriftelijke toestemming van Canon Inc.
0CK3-013 Handelsmerken Canon en het logo van Canon zijn gedeponeerde handelsmerken van Canon Inc. in de Verenigde Staten en zijn mogelijk handelsmerken of gedeponeerde handelsmerken in andere landen. Windows, Windows Vista en Windows Server zijn gedeponeerde handelsmerken of handelsmerken van Microsoft Corporation in de Verenigde Staten en/of andere landen. Bonjour, Finder, Macintosh, Mac OS en OS X zijn handelsmerken of gedeponeerde handelsmerken van Apple Inc. in de VS en/of andere landen.