Specifications

0AWU-005
Installing the MF Drivers and MF Toolbox
Install the software to use the machine.
"Installing Using [Easy Installation] (For Windows)"
"Installing Using [Custom Installation] (For Windows)"
"Installing the Software (For Macintosh)"
"USB Cable Connection (Only when Connecting with USB)"
"Checking the Installation Results (For Windows)"
"Registering the Printer and Fax (For Macintosh)"
"Installing the Latest Drivers Downloaded from the Canon Homepage"
The method of installation varies depending on the connection method or environment.
OS
Connection
method
Installation method
Windows
USB connection
"Installing Using [Easy Installation] (For Windows)"
*
"Installing Using [Custom Installation] (For Windows)"
Network connection
(IPv4 environment)
Network connection
(IPv6 environment)
*
"Installing the MF Drivers on the WSD Network (For Windows)"
Macintosh
USB connection
"Installing the Software (For Macintosh)"
Network connection
When installing downloaded drivers
"Installing the Latest Drivers Downloaded from the Canon
Homepage"
Presto! PageManager is not installed by selecting [Easy Installation]. To install the software, select [Custom Installation].
If you are operating in the IPv6 environment, you cannot install the drivers or software following procedures below.
Refer to "Installing the MF Drivers on the WSD Network (For Windows)" to install MF Drivers.
You may not be able to use the scan function in the IPv6 environment.
IMPORTANT
User rights for logging on to Windows
Log on as a user with administrative rights.
When installing via USB connection
Connect the USB cable after the software installation.
Make sure that the power of the machine is turned ON when connecting the USB cable.
When installing via network connection
Before starting the installation, check the following.
The computer and machine are connected via the network.
The power of the machine is turned ON.
The IP addresses are properly set up.
Installing the MF Drivers and MF Toolbox
㻤㻌㻛㻌㻣㻠