Operation Manual

Table Of Contents
0ALJ-008
Removing Packing Materials
Read the precautions in Installation and Handling, and then carry the machine to the installation site and remove all of the
orange tape and packing materials. The shape and location of the packing materials described here may differ from those used for your
machine, as the packing materials may have been changed, added or removed without notice.
NOTE
Save the packing materials
The box and packing materials included at the time of purchase will be needed when transporting the machine for relocation or
maintenance.
When installing the optional paper drawer (MF8580Cdw / MF8550Cdn / MF8540Cdn only)
Install the optional paper drawer (Drawer 2) before moving the machine. For details on how to install the paper drawer, see the
installation manual included with the optional paper drawer.
Check the installation site.
Remove the machine from the plastic bag and carry it to the installation site.
Use the handles on both sides of the machine, and have at least two people carry it.
Installation Requirements
Install the machine in a location with the following characteristics:
Sufficient space
Ensure at least 100 mm on the right side and back side of the machine.
MF8580Cdw / MF8550Cdn / MF8540Cdn
MF8280Cw / MF8230Cn
Good ventilation
A flat, even surface
A stable surface able to fully support the weight of the machine
Environmental Conditions
Temperature: 10 to 30°C
Humidity: 20% to 80% RH (no condensation)
1
2
㻞㻟㻌㻛㻌㻢㻣㻢