Operation Manual

Table Of Contents

0ALJ-061

Scanning Using the [Scan > PC] Key

Place a document on the machine, and press or , and scanning starts immediately. The type of

scan (color or black and white), the save destination for the document, and other settings can be registered

to a key, and documents can be scanned using those settings. This section describes how to register settings

in a key and scan with it.

Registering Your Settings in the [Scan > PC] Key

Using the [Scan > PC] Key

or .

Press .

Use / to select <Scan Settings>, and press .

Select <Shortcut Key Settings> <Register>.

Select <Scan -> PC1> or <Scan -> PC2>, and press .

Select the key to which you want to register settings.

Select the type of connection that is used between the machine and computer, and press .

<Off>

Select this setting to erase registered settings.

Select this setting if the machine and computer are connected via USB.

Select this setting if the machine and computer are connected via a network.

Select the destination computer, and press .

This screen is not displayed if you select <USB Connection> in step 5.

Registering Your Settings in the [Scan > PC] Key

㻞㻡㻠㻌㻛㻌㻢㻣㻢