Operation Manual

Table Of Contents

0ALJ-0EK

TX Result Report (MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw

Only)

You can check the fax or e-mail logs of sent documents as well as documents scanned to a shared folder by printing a TX Result Report.

The report can be printed either every time a transmission is completed or only when a sending error occurs.

(Report) <Report Settings> <TX Result Report> Select the print setting

<Off>

Select if you do not want to print TX Result Reports.

<On>

Select to print a TX Result Report every time you send a document.

Select to print a TX Result Report only when a sending error occurs.

Example: Fax sending

Example: Scanning to e-mail/shared folder

Result

"OK" indicates that the transmission was completed successfully while "NG" and three digits (an error code) indicates that the

transmission failed (

When an Error Code Appears).

Department ID

The Department ID is shown when Department ID Management is enabled.

Sent/Error

For e-mail, TX Result Reports indicate the transmission result between the machine and the mail server, not between the machine

and the destination address. Even if the transmission fails, a three-digit error code will not be printed. To check the error code,

print a Communication Management Report (

Communication Management Report (MF8580Cdw / MF8550Cdn /

MF8540Cdn / MF8280Cw Only)).

㻢㻜㻣㻌㻛㻌㻢㻣㻢